Following on from yesterdays teaser and results oops – I’m a launch person wont know an L Mullet boat from an H Mullet boat – no one died, its a new day, we move on.The winner of the actual Lipton Cup, hosted by the Ponsonby Cruising Club – L division (22’) was Orion, 2nd went to Limited Edition, with Tamerau 3rd.The H division winner was Corona. As of Sunday night there were no results posted on the PCC website – so at some stage soon 🙂 go there for details.
There are lots of tales around how the PCC obtained the magnificent trophy, which was crafted by the same jewellers as the Americas Cup – you can read more about the history of the cup here https://www.pcc.org.nz/history
I was land based, using a long lens so some are a little fuzzy, but you get the vibe of the day. Sorry if your boats missing – drop me an email and I’ll check the photos, took lots, but some had other boats in the background etc. As always click on photos to enlarge.
Good to see Geoff Bagnall floating around on his launch, must have escaped Gisborne for the weekend 😉 Photos below ex Don MacLeod
The Start Rounding The Second MarkFleet Leaders Second Mark – Tamatea > Orion > Tamerau > Limited Edition
Last week myself and Jamie Hudson (Lady Crossley) pointed the car south for a pre-arranged visit to the yard where Paul Tingey is performing his magic on the 1948 Colin Wild built woody – Haunui.It was just over 5 months since I was last there and the project is moving along a great clip – check out the WW link below to view the first visit and to read the scope of the job.
Back in 2014 we did a great story on the 34’ replica Herreshoff steam launch that Chris McMullen is building in his spare time, back then it had been 30 years in the making and now its approx 37 years, but when I called in last week, there had been some significant progress. Have a read of the 2014 WW stories to take in the magnitude of the project – everything , including the steam engine built by hand. When Chris started the project he didn’t have the benefit of the internet or google to help but in recent years he has uncovered numerous old photos that have helped with the project.
Some Background: Herreshoff Manufacturing Co build # 263 was a steam launch called “Cassandra Junior” and Chris believes that is the steam launch shown astern of beautiful 287′ S.Y. “Cassandra” in the photo below, she was stowed on the port side launch of the yacht. The Herreshoff Manufacturing Co built approximately twenty of this type of steam launch in the 27f’ > 34′. The H.M.C build # 227 – Vapor, refer photo below, was 30′ and built for the Steam Yacht “Yacoma” but Chris understands she was never used on that ship. A model of “Yacoma” at Mystic Sea Port Museum shows a steam launch but Chris assumes the ship had a more convenient modern motor boat.
The last b/w photo below is the tender for the steam yacht ‘Wanderer’ (photo below) called ‘Wanderer Junior’. She was Herreshoff build # 270, she is American and measures 27′ 11″. Built 1909. In the back ground of the photo is the ‘Ida Lewis Yacht Club’.
The engine on Chris’s launch has been run and currently getting a tidy up before being re-installed. The main reason for the visit was to get an update on the restoration of Haunui, the 1948 Colin Wild launch – happening nearby – check in one Wednesday for that story. I took Jamie Hudson, skipper of Lady Crossley , an almost sister ship, built one year apart, fascinating to get Jamie’s view on the two boats.
H.M.C work shop – unidentified steam launch. Cassandra, with Cassandra Junior astern
Vapor with her late owner Jon Martin. Taken late 1960’s
WandererWanderer Junior – built 1909
IT FLOATS – On 11-11-2021, on the upper reaches of the Tamaki River, Chris McMullen ticked off a rather large item on his to-do list. He launched his N G Herreshoff design Steam Launch. Chris commented that it was just a floatation trial, and that the design floated absolutely level. In the photos below we see her with all her machinery but with no fuel or water. Chris commented that for years he has had the greatest respect for the late Nathanial Herreshoff and devoted over thirty years (on and off) of his life to the project and is as keen as ever to get it under steam power. You can see, at the link below, the only image Chris has found of the original “Cassandra Junior” see https://www.agefotostock.com/age/en/details-photo/the-steam-yacht-cassandra-1913-creator-kirk-and-sons-of-cowes/HEZ-2696001
UPDATE 04-01-2022 – The below photos were from a shed visit in early Dec 2021, post the above water line test 🙂 click to enlarge
Very early start yesterday – left the marina in the dark, no issues with that but it was a 3.60m high tide so the harbour was full of junk / driftwood. Just off North Head there was a loud clunk, followed by multiple clunks – had collided with a 12m+ very bendy Pohutukawa branch, thankfully it was dispatched without having a relationship with the propeller. The reason for the early departure was a quick trip to The Slipway Milford for a trip to the beauty parlour – 2 hour turnaround – water blast the bottom, fix a few scrapes and dents – Raindance was starting to look tad like a work-boat 🙂 Amazing what you can achieve with the right tools, product and a heat gun 🙂 thanks Jason Prew.
Along side Raindance on the #2 railway slip (there is 3) was Eileen Patricia, also getting some TLC, heads up – never ask EP’s owner to ice a cake for you…… 😉
As I was heading out of the creek, I had to wait while the very smart ex workboat – Te Hauraki came into the marina, on route to The Slipway Milford for some work to her decks. She always looks the part – her shape and paint scheme work perfectly.
Following on from Sundays story on Matahorua the sailing cutter tied up at the Riwaka river / estuary , today we follow the camera of Tim and Pauline Evill as they explore the craft that call Riwaka their home ‘port’.
A fine collection of woodys, all appearing to be well loved – if you had the Riwaka agency for marine varnish , you wouldn’t remain in business for long 🙂
When you step aboard the 50‘ Arohanui you feel the warmth that comes from 50+ years of tender loving care and consideration.
Built using the finest materials available – NZ kauri and Burmese teak, her planks were later glassed over, this undertaking when combined with the varnished (uroxsys) cabin gives Arohanui the resilience of a modern f/glass vessel. Arohanui was designed by A. Donovan (with significant reference to the the Hacker Boat Company, USA designs of the same period) and built by the Lane Motor Boat Company and launched in 1965 – she featured on the cover and was the lead article of April 1966 issue of Sea Spray magazine, the magazine described her as a twin screw diesel gentlemen’s motor yacht. Arohanui was built to comply with Marine Department survey requirements.
A brief overview – 50’ LOA – 13’6” beam – 3’5” draft, 3 double private cabins + 2 berths in saloon, 6’4” head-room. Powered by twin 300hp Iveco engines. Cruising speed – 15knts – Max – 20knts. And the most impressive Lithium battery power management system I have seen. Her inviting interior is aided by a central heating (diesel) system installed in 2017.
In 2015 she underwent an extensive refurbishment at Lees Boat Builders – view video below to experience the attention to detail and standard to work.A full list of her inventory and specifications is available to likely buyers. Private viewing by appointment only. Contact waitematawoodys@gmail.com
If you have a serious interest in Arohanui, I suggest to go onto trademe and enter the following criteria – boats, fibre-glass, twin inboard, 14>16meter – and review what one would pay for a white plastic floating apartment of a similar size and spec, then come back and take in Arohanui again – then be quick with your reply 😉
Requests for info on boat on WW can be a lot like paying the pokie machines – you ‘feed’ the machine and pull the handle – sometimes it spins and nothing comes up, most of the time we get a small payout, just enough to keep us motivated to keep playing – then sometimes you hit the jackpot.
Today’s story is a jackpot pay out – starts like this – over the last 5>6 years the 1939, 56′, Miller & Tunnage built – Koputai has popped up on WW and we have been trying uncover more of her history. Back in May 2015 she was for sale and the then owner, the late, Louey Sandiant told us everything you would want to know about the photo + photos. Then in Sept 2020 Keith Foster, who purchased Koputai off Louey contacted WW and supplied some updated photos and a request for any further intel on the boat.
It took a few months but Matt Siddells made contact and advised that his grandfather – Russell Bramwell purchased Koputai as a retired pilot boat and did the conversion to pleasure boat. Matt has very kindly shared the gallery above of photos from the family album. You can see and read more about Koputai at the WW links below
A LOCK-DOWN TREAT – FREE ACCESS TO THE WORLDWIDE CLASSIC BOAT SHOW
Our friends over at Off Center Harbor have been orchestrating a new gig on the classic boat scene – a virtual worldwide classic boat show. Its been live now for 10 days and only available via purchasing a ticket (US$5) – now woodys to help us kiwis (and the WW overseas followers) during CV-19 lock-down – the show is now free.
See below instructions on how to visit the show.
You can use the globe / map to see an amazing collection of vessel around the world + locations of museums & trade folks – but the real gem for me is the daily video presentations from some of the worlds leading lights on the classic boating scene – sailors, teachers, photographers, event promoters and boat builders. You will be addicted so I apologise in advance for ruining your day/s – but, you’re supposed to be in lock-down 🙂
If you only watch one presentation – make it the legendary Tom Cunliffe presentation – you’ll find it on Sat Feb20th under the heading ’Seas of Northern Europe’ – do not be put off by the boring title – its a cracker, the mans one of the best storytellers around, you’ll be glued to the screen for 2 hours. ENJOY THE SHOW 🙂
2. Checkout for free, and your username and password become your ticket
3. To login, go to ClassicBoatShow.com, click login in the top right corner to get full access, and enjoy the show!
If you have trouble getting your free ticket, you can always email the show’s crew for help at crew@classicboatshow.com.
If the show turns out to be an enjoyable and valuable experience for you, they have a voluntary “tips/donations” button on the top of the screen where you can contribute.
Today’s woody is a very smart looking 40’ ex work boat named Power Chief, which given the stated 1906 year of build, I suspect has had a name/s change at some stage.
Her tme listing (thanks Ian McDonald) tells us she was built by McPherson Bros. on the banks of the river Lieth in Dunedin, South Island. She fished for many years out of Port Chalmers, Oamaru and Timaru – these days home is Back Beach, Port Chalmers.
The seller is very conservative in the asking price so I suspect she will be snapped up asap. No mention of what powers her. Any southern woodys able to tell us more about how and when this fishing boat made the transition to pleasure?
Harold Kidd Input – POWER CHIEF was a new name given to an earlier launch built in 1923 (according to NAPS records – Z166) probably by McPhersons. G J Morrison of Company Bay Port Chalmers bought her in 1939 and renamed her POWER CHIEF after a popular brand of Caltex petrol. He was probably a garage proprietor. Her dims were 36′ x 9’3″ x 3′ 6″ and she had a 16hp Viking marine engine built in Dunedin by Tonkinson. I haven’t figured out her original name yet.
07-03-2022 UPDATE Recent photos of PC hauled out, she is powered by a Nissan LD28 diesel engine.
JACK LOGAN WOULD BE HAPPY Back in November 2020 we reported that Lake Rotoiti boatbuilder Alan Craig (Craig Marine) had taken on the restoration of the 1956 Jack Logan built 17’ clinker cabin run-about – Sea Spray. The WW link below will show you the boat as Alan received it. https://waitematawoodys.com/2020/11/14/sea-spray/
I can report that Alan’s yard are well under way with the project, as you can see in the above photos, once the reciprocating saw comes out there’s no turning back. Alan commented that most ribs were repaired and structure added. Her shape was pretty bad, had a chine in it almost. A few planks to replace on the bottom then into the cabin. Looking forward to following this project – just need to keep reminding Alan to send in the updates 🙂
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 