The classic launch – Maybelle recently appeared on tme, so thanks to the listing and Ian McDonald we get to have a good look at Maybelle. Her tme listing has her from the Collings and Bell stable and 32’ 10” in length. She is powered by a Ford Lees 6 cyl. diesel engine that gets her along at 7>8 knots. Appears to be very well maintained and appointed. Can anyone confirm the parentage and where she has been for the last 70+ years?
Help Wanted Locating A Vire Inboard Engine
Woody, Simon Smith has asked for help locating a Vire 7 hp, petrol, single cylinder inboard engine similar to the photograph below. The engines are made in Finland. Any help, even a suggestion as to where to look on line would be greatly appreciated.
HOW MANY MORE SUMMERS WILL YOU LET SLIP BY WITHOUT A BOAT………
Waitematawoodys has a sister – its called the Wooden Boat Bureau and we sell classic wooden boats – launches, yachts, big and small. We like to fly under the radar, as do most of our clients. Someone asked me what I did the other day – below sums it up (sounds a bit fluffy, in reality I just sell boats.
Inform and enthuse interest in the joys of owning and sailing traditional and classic wooden boats. And we do this by promoting partnerships between the boats, the sellers and the buyers, for the benefit of all. At the end of the day – its all about the boats, as most will out live their current owners.
Myself and David Cooke (MV Trinidad) are almost always available to offer advice to sellers and buyers – in the interests of marital harmony – in the first instance email to the below
In the last few days I received several messages about the 34’ Woollacott yacht – Korowai, that had popped up on tme with an asking price of $1,000. One of the woodys that contacted me was Alistair Rowe, who commented that he remember Korowai being at Shelly Park Cruising Club in the mid 1970s owned by Eric Roberts. In those days she was powered by a Ford 10 petrol engine and had no reverse gear, so was a bit of a beast to maneuver in tight places. Quite a few years after Eric’s death, and her sale to new owners, Alistair saw her on the hard at Okahu Bay being given a major birthday.
In the tme listing it stated she had great bones for a restoration – well that she does. She was being sold as-is-where-is as she had had a few problems eg a leak in the hull that a bilge pump with a float switch was keeping up with. But she had, had a bilge pump malfunction and there has been water inside. The water level went part way up the motor, touching the motor, however the dipstick hole on the motor remained well above water level. It was stated that the engine was in not running condition. But the sails were described as ‘good sails’. Korowai appears to be a really solid kiwi built yacht and a perfect opportunity for the keen handy person to restore her back to her prime at the right price. The seller was very clear about the sale process eg.
(1) The yacht needs to be out of the marina berth ASAP
(2) The successful purchaser will not be the first person to offer the money but the best and quickest plan for the removal of the yacht from the marina berth
(3) All enquiries must explain how they will remove the yacht and when- if the answer is unsatisfactory then no further time will be spent on the enquire – no time wasters.
Well woodys – must have been a record listing time for a classic yacht – sold to a great new owner and removed from her West Harbour berth and relocated to her new home, last night. Tow boat was Jason Prew’s My Girl – but he assures me he is not the new owner – 2 classic launches and mullet boat yacht is more than enough 🙂
In my travels yesterday I acquired a very dinky 2-1/4″caulking iron – light clean up and it joins the WW global HQ, desktop paperweight collection.
The above photo was sent in by Scott Taylor, son of the late Mac Taylor, a prominent marine broker based in Westhaven. The caption reads – H. Vipond, Silverdale, 32’ x 8’6”. Scott commented that it would most likely have been – Mr Vipond of Vipond Road, Stanmore Bay, Auckland.
In a WW story back in July 2016, Harold Kidd commented that Ozone was built by Percy McIntosh in Whangarei in 1914 for a Harold Vipond for the Auckland-Wade River trade. Then he took Ozone north to the Bay of Islands in 1925 or perhaps a tad earlier for game-fishing, which she was very successful at. Link below to the 2016 story
In the photo above we see her before her helmsman ’turret’ and mast were added. Any guesses on the photo location – I’m always wrong, but my guess would be Whangaroa Harbour. (to confuse maters HDK advised that there were two launches named Ozone around the same time – the other was built by Collings & Bell and wrecked at Takatu in Jan 1930)
I’m helping Scott re-purpose some woody goods – check out the photo below of the pair of pohutukawa knees, quite large but maybe a little thin for a big sailing woody but a nice launch…………
Last month thanks to a tme listing we got to have a peek-down-below on the launch 32’ Equinox (previously named Lyngrae) link to that WW story below. She was based on a Shipbuilders / Roy Steadman design and built by H. Sapwell- launched in 1964.https://waitematawoodys.com/2021/10/11/equinox-lyngrae-a-peek-down-below/
As a result of the WW story we were contacted by Richard Cullen, whose father, David Cullen owned the launch from the early 1970’s to early 2000’s. During this period she sent most of her time moored in Coromandel. Richard commented that the family spent many memorable holidays cruising the gulf from Coromandel to Gt Barrier Island, Waiheke Island, Kawau Island and the occasional trip up to the Bay of Islands. Richard relayed an interesting tale of a trip his father did in the 1980’s bring the launch from Coromandel all the way up the Waihou River to Te Aroha. On route up the river, she hit a snag and started taking on water – luckily she made it to the old Dairy Factory site where she was quick-smart hauled out. The haul out for hull repairs grew into a substantial refit.Subsequent trips up the river extended no further than the Maritime Park at Paeroa, where over the years she hauled for winter maintenance and also had another major refit that included extending the hull by 3’ and the addition of the portholes. The more ‘modern’ looking photos are at the Maritime Park in Paeroa.
Richard commented that Lyngrae would be one of the few boats to have been both over and under the old Kopu Bridge. Fingers crossed that the launch finds a good new owner, nudge, nudge 😉 😉
Help Needed Identifying This Launch – Caesars Palace > Paris > Alena
Can not read the name (something Palace?) and the tme seller doesn’t know the builder or year, but commented that mid 1960’s looks right. Also others have mentioned she has a certain ’Shipbuilders’ look to her. But all the aside, we know she is 34’. Made of strip planked kauri and powered by a Ford 90hp diesel that sees her cruising at 7 knots, with a max of 9 knots. Home berth is the Hibiscus Coast. Can we expand on the above.
Also they would have to win the award for the most ‘off-the-wall’ question on the tme listing – see below 🙂
UPDATE – seems the boat has had multi name changes – thanks to Darrin Kennedy we now know she was called Paris and before that Alena and probably something else b4 that 🙂 https://waitematawoodys.com/2016/02/26/paris-alena/
The 32’ launch – Equinox, is based on a Shipbuilders / Roy Steadman design and built in Dominion St. Takapuna by H. Sapwell and launched at Allen Williams boat yard, Milford in 1964. When launched she was named Lyngrae.
Built using triple skin kauri, as launched she was powered by a Morris Commodore petrol engine, later re-powered by a 60hp Fordson. In 1970 she was re-powered again at Mt Maunganui with a 100hp Trader Ford engine. These days Equinox sports a very impressive Steyr MO 256hp engine, which must push her along at an impressive speed.
In recent times the boat has had a lot of time and funds spent on her, as seen in the photos ex tme (thanks Ian McDonald) In the photos above she has a re-modelled cabin top, below in the b/w photo we see her as original.
Very impressive to see what must be one of Auckland’s biggest families, they obviously all live in the same house and all own a boat each – as they say ‘families that boat together, stay together’ 🙂 🙂 🙂
IMALONE Todays woody was designed in 1950 by Jack Guard, who built the hull and John McCauley did the decks and wheelhouse in Putatea Bay, at the top of the South Island. As per all of Jack’s boats she was built of kauri / hardwood with birch ribs.
Her specs are 34’ in length with a 10’ beam. When built she was powered with a JP2 Lister engine, that was replaced approx. 25 years ago with a Detroit GM 371.
Subject to a survey – she appears to have great bones and would be a cool candidate for a conversion to pleasure use. Nelson is the home port.
Today’s woody – Moanaroa was designed by Jack Taylor and built c.1949 by McLeon Brothers. Unusual hull construction being carvel Totara planked (and sadly glassed) She measures approx. 34’4” and is powered by a 67hp Fordson Major diesel engine.
Based on the design and construction of the stern davits, someone has had access to a metal shop, you could left the QEII with those 🙂
Scrolling thru the USA WoodenBoat Forum yesterday my woody antenna popped up when I saw a new thread on the New Zealand yacht Rogue – the 1892 gaff rigged 32’ cutter built by Chas Bailey Jnr. , it was in fact his first design.
The restoration of Rogue has been a happening thing since late 2007 and a lot of the time under the radar, not helped by her residing in Wellington.In the 2015 > 2018 period there were some unexpected ’speed bumps’ that derailed the project, and her owner relocated north to Auckland. So in early 2021 after a 120 year absence Rogue followed her owner and returned to Auckland and slipped into Wayne Olsen’s shed at the Horizon Boatyard. There the restoration has moved along at a good clip, and CV-19 aside, we can expect a splash date in early November.
I would be surprised if there was a better documented history on a classic vessel in New Zealand, and the restoration project is jaw dropping – an amazing commitment to one of New Zealand’s magnificent maritime artefacts. Below are links to the most recent project monthly updates , but given that most of us are in lock-down, I would encourage you to click on this link https://rogue1892.com/rogues-restoration/ and scroll (its a long way) to the bottom and follow the project from day one.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 