Category Archives: Engines

Rambler

Posted on by
1

RAMBLER

The 24’ Lake Rotoiti based woody – Rambler was built by Joseph Anderson in the Big Omaha Valley near Matakana and launched in 1913. It took 3 years to build the boat and she was one of the first boats to be built with a kauri strip plank construction.   Rambler was used to travel to Auckland as it was easier by boat than by road. After returning from World War 1, George Anderson, Joseph’s son, used Rambler to travel to Kawau Island for cray fishing, trapping possums and hunting deer. These trips also became the delivery for mail and provisions to those living on Kawau.

In the mid 1930’s, Rambler was sold to the local cobbler in Matakana and the boat was used for fishing trips but later was left in the mud in a sorry state. In the 1970’s Rambler was sold and given a major refit including having a top cabin added.

Rambler was discovered in Howick in 2000 and was brought to Lake Rotoiti, Rotorua by her current owners, where she was refitted with a revamped interior, hand made cedar mast, bronze and brass fittings and a number of other improvements. Approx. 1990 her engine was changed from a petrol Chev 4 to a two cylinder 20hp Chinese diesel. This still goes but needs to be replaced. Amazingly Rambler has had only four owners in her 108 year old life, and now is on the market, awaiting her next custodian. Thanks to Ian McDonald for the tme heads up.

Hauiti

Posted on by
6

HAUITI

During the week Hugh Gladwell gave me the heads up on a woody project that was nearing completion. The ex navy 3-in-1 whaler, Hauiti, also known as a motor sea-boat, was built at the Naval Dockyard in 1962 out of double diagonal kauri. She has been converted by Peter Thompson (who was the project manager on the Jane Gifford restoration) to a river boat to operate in survey on the Mahurangi River. Hauiti is powered by an Elco electric motor which will run for about 7 hours and is charged by a bank of solar panels on the cabin top with no shore charging. Peter Sewell has designed the propellor.
Hugh commented that the river is now dredged along 3 quarters of its length to a depth of 1.5 metres at low water and they have about a year to go to complete the project. Once complete, the upper basin area  will be a great overnight cruising destination for swallow(ish) vessels. Watch this space for a woodys weekend cruise.

Looking For Santa Sack Fillers

For what seems a very long time (25 years in fact), Rotorua woody – Ronald Wattam has been beavering away pulling together a book on the boat building dynasty  – C.J.and A.J. Collings. Ron is linked via marriage to the family. The book covers the period 1896 > 1967. Yesterday a package arrived with some advance copies –  I am so manic on the work front I haven’t had a chance to read, but at 153 pages its a very extensive collection of photos, data and insights into 70 years of New Zealand maritime history. I have two copies to give away – the question is – approximately how many boats did the Collings & Bell company build?. All close answers will go into the draw for one of two copies. Entry is by email only to waitematawoodys@gmail.com closes 9pm 17-12-2021 If you miss the draw – copies are available at $55+p&p, direct from Ronald Watttam at olivine@xtra.co.nz

Minocquia – 50′ Halvorsen Motor Cruiser + CYA Marina POLL Results

Posted on by
Reply

50’ HALVORSEN MOTOR CRUISER – MINOCQUA Todays story from the Australian Wooden Boat Festival – ‘Folk Boat’ video series features the stunning Minocqua and her custodian, Andrew Cannon AM. The 50ft vessel was built and designed by Lars Halvorsen and Sons in 1947. The luxury motor cruiser is a great example of an early post World War II boat. She has now been berthed in Hobart for nearly 20 years and Andrew loves escaping his busy life, to spend time cruising the D’Entrecasteaux Channel on Minocqua. Sit back and watch the story above.

THANKS FOR VOTING


If you missed the results from Tuesdays POLL on the NZ Classic Yacht Association’s new Heritage Basin marina – its was a clear winner for the marina to be open to all CYA vessels, with 85% voting for this option. In comparison only 15% voted from it being used by YACHTS alone, via invitation, and these yachts would be pre WWII, NZ designed and built, and preferably gaff rigged, A Class vessels. You don’t have to be a rocket scientist to see what people with sawdust in their veins want. Over 1,000 votes received and the second highest day in terms of individual visitors to the WW site. Thank you again for all those that took the time to connect with the story. We will keep you posted.

Eldon

Posted on by
6
2021
2012
Peter Flood

ELDON

The launch Eldon was built in 1971 by Tauranga Boat Builders, so slips into the spirit of tradition woody category. The original owner was Eldon Jepson – thence the name.

Her specs are 48’ long and built with single skin kauri. It is believed that during construction, Tauranga boat builder Ted Gilpin, was often on hand, to assist in various ways, adding, the ”Gilpin touch,” which is very evident in her design & styling. When launched she was powered with twin Perkins 6-354 6 cyl. 130hp diesels.

Jepson sold her to an unknown person, not too long after she was built, who in turn, sold her to John Mayson, around the mid 1980’s. During John Mayson’s stewardship, of around 20+years, she was kept at Pine Harbour and used extensively for game fishing, from Tutukaka, up to North Cape, as well as general cruising, around the Hauraki Gulf.

She changed  hands again (06-05-2008), to Dean Pollock, who continued to keep her at Pine Harbour and later sold her (22-07-2010) to her present owner, Peter Flood. She was transported by road to the Kaipara Harbour, where she was initially moored at Pahi, but they had a major bird mess problem there, so she was moved to Tinopai, where she presently lives. 

In 2015 Peter Flood replaced the original 6-354 Perkins,130 hp with 2 x 6-354T, artificially aspirated 6 cyl. 1978 model Perkins, rated at 185 hp each. These had come out of 2 Commer fire engines, which had only done around 50,000Km., & having been in fire engines, had naturally been fastidiously maintained. Being a farmer and very handy, Peter marinized them himself. The engines were matched to the original Borg Warner gearboxes and heat exchangers off the original engines. He left the new engines with uncooled exhaust manifolds, which whilst they get warm, have created, no problems, in any way, as her engine room, under the bridge-deck floor, is apparently very well ventilated. The engines are mated up with a truck type silencer on each exhaust, with wet stainless steel exhausts for the last 4 feet, before they reached the hull skin fittings, so they are almost completely silent. 

Peter Flood commented to Ken Ricketts that Eldon is an important part of his family and she is used all the time. In the last photo above of Peter at her helm, on the Kaipara Harbour that Eldon appears to be in excellent condition.

Thanks to Ken Ricketts for pulling the core of this story together and special thanks to the following gents for sharing details and photos – Harold Kidd, Brian Worthington, John Mayson, Dean Pollock and Peter Flood.

Chris-Craft Runabout – Almost

Posted on by
1

Chris-Craft Runabout – Almost

The above ‘woody’ is the latest from the workshop of John Bullivant and is based on a USA Chris-Craft small runabout design. John scaled the model up from 18” to 33” using an old late 1950’s plan. It’s made of balsa with a ply deck, and the hull is f/glassed. It has twin motors and the same smoke and water system he  installed in his models of the W1, Jaguar and Hartley.

Like the Hartley it is built-in bluetooth stereo, lights and engine sound. Runs very nicely and looks quite scale like on the water. Motors are hidden under the rear seat with the air pump and smoke system, and the water pump and batteries are under the hatches in the stern. Below are two YouTube  videos – sound quality average, but you get the idea 🙂 Photos sent in by K Ricketts

Lake Rotoiti Classic & Wooden Boat Parade

Nice to see the north island event getting a good plug in the latest issue of Boating NZ magazine. I provided the photos below to help the lake team get some exposure for the 2022 event – the 25th Anniversary – well worth a trip – details here https://www.woodenboatparade.co.nz

Haunui Restoration Update #3

Posted on by
5

Haunui Restoration Update #3
Almost 6 months has passed since I poked my nose and camera (I was invited) into Paul Tingey’s shed to view the progress on the 1948 Colin Wild built woody – Haunui.The links below will take you back to the two previous visits https://waitematawoodys.com/2020/11/13/haunui-restoration/

https://waitematawoodys.com/2021/04/28/haunui-restoration-update-2-woody-classic-event-dates/

Given all the constraints of CV-19, the countless lock-downs, supplier closures etc – Paul Tingey has made amazing progress on the project. A high % of the work done in the last 6 months has involved rebuilding and adding additional strength to the original design / build. Even my untrained eye could see how more resolute the vessel was.

We also got a peek at the twin new engine installations  – the main ‘Deutz ‘ engine and the trolling / backup electric side engine.

WAITEMATAWOODY GEAR FOR SUMMER – GETTING LOW ON SOME SIZES, SO ORDER ASAP TO AVOID DISAPPOINTMENT. LINK BELOW FOR ORDERING
https://waitematawoodys.com/2021/11/11/58095/

Yesterdays WW T-shirt winner was Ronald Walton, with his emailed entry – “Todays boat at Milford Sound is the sister ship to Miss Picton and it is a Donald Sutherland photo taken c.1935 I have seen this before down at Milford from an old Museum at the road to the Holyford Track. The museum was burnt out with a loss of lots of old photos.”

Lady Adelaide – A Peek Down Below

Posted on by
4

LADY ADELAIDE – A Peek Down Below

The woody Lady Adelaide has been part of the classic launch scene in New Zealand for a very long time, if you were able to view the old CYA launch event photos (the death of the CYA Forum said bye bye to the old photos)), Lady Adelaide and her skipper, Kerry Lilley feature in most launch event photos.  Amazingly Kerry has owned Lady Adelaide for 32 years and being a boat builder, that makes the lady a very lucky boat. Not many classics have that length of ownership and care, most slide up and down in terms of maintenance and appearance.

Built by Dick Lang in 1922, she is kauri carvel planked, and back in 2000 Kerry splined and glassed the boat, so maintenance is minimal. LOL is 36’ (35’ LOW), beam is 8’ and she draws 3’. Power is from a Ford 70hp, 3 litre diesel, installed new in 2000. Top speed is 10 knots, but cruises all day at 8.2knots, with a fuel consumption of 7L an hour.

As you will see from the photos, after 32 years Kerry has refined and fine tuned very aspect of Lady Adelaide, need something, just reach out and it is where it should be.

Kerry contacted me several months ago and said “I’ve made the decision to pass the lady onto her next custodian, so once we escape CV-19, can you sell her” – so woodys Lady Adelaide is now on the market. If you are looking for classic launch that you can just step aboard and be boating this summer – this is the woody for you. Marina also available for rent. Expressions of interest to the Wooden Boat Bureau c/o waitematawoodys@waitematawoodys

Very Cool Vintage Engine

Posted on by
4

Very Cool Vintage Engine

Todays all about on vintage outboard engines – mooching around a boat shed yesterday I spotted this wee gem – aside from being such a cool piece of engineering, the first thing that hits you is how light it is – compared to the Yamaha 3hp alongside, it was a less than a 1/4 the weight – how does that work?

So the question today is can we ID the model and year – we must have some o/b nutters amongst us. 

UPDATE (A)  21-11-21 Mark Jack advised the model of the engine is a MATE, refer photo below, and rated at 1/2 hp and built in 1939, they were also marketed as the more basic Elto. 
Renown as one of the must frustrating engines ever made, smooth and sophisticated when it ran but it frequently didn’t. The engines are relatively lightly built intended for fresh water use. 


UPDATE (B) 21-11-21 Chris McMullen sent in the photos below of the engine and a page from the Popular Mechanics magazine, the shows the intended usage – as a canoe engine.

Second half of the story today – a few months ago I did a plug on WW for the small hydro-plane Miss Wahoo , it was snapped up by Keith Munro and she has already been given a spot in the man shed, see photos below – Keith is now on the lookout for a 15 hp motor of 1950 > 1960 vintage – an Evinrude or Johnson would be the 1st picks – any one able to help out?

Woody Hydroplane

Posted on by
2

WOODY HYDROPLANE

Today’s photo is a kosher woody – built from kauri planks, she measures 16’x7’, flat bottomed, and powered by a 4 cyl. Cirrus-Hermes aero petrol engine. She had a top speed of 45mph, consuming 4 gallons per hour. I suspect after one hour you would have been deaf for the rest of the day. And woodys – she was built by one of our boating building royalty – none other than – Percy Vos. (photo ex Andrew Donovan collection)


SEA SPRAY MAGAZINE – Volume 1 – No.1 December 1945

I was ‘flicking’ thru my much treasured copy of the above (thank you Dave Giddens) and my eye stopped on page 23, titled ‘Jottings Of The Month’ which talked about the decommissioning of Auckland’s yachting fleet that had been laid up during WWII.

Page reproduced below – mentioned are – Ariki, Tawera, Little Jim, Rainbow, Tamatea,Ranger, Iorangi, Ngatoa, Prise, Rawene and Aramoana.
Also covered in the article is the sad loss of life of the skipper (W. E. Lawrence) of the 1913, Les Coulthard built 22′ launch – Minx. Lawrence drowned in Patiki Bay, Waiheke Island trying to retrieve Minx’s tender that had come adrift while at anchor. See & read more on Minx here https://waitematawoodys.com/2016/06/27/minx/

Update On Melodeon Restoration

Posted on by
2

Update On Melodeon Restoration

Back in June 2020 we had a wonderful insight into Dick and Colleen Fisher’s latest project – the restoration (rebuild) of the ex work boat – Melodeon (link below to that story. https://waitematawoodys.com/2020/04/06/the-restoration-of-melodion/

Melodeon was built in 1934 by Chas Bailey & Sons in Auckland. She has spent most of her life fishing all around NZ, except when she saw service in the Pacific during WWII with the US Navy.

When Dick bought Melodeon she was powered by a T8 Kelvin that is only her 2nd engine, which has seen 100,000 hours. The engine was in remarkable condition and is also getting a ‘holiday’.The ship measures – 57’ length x 15’6” beam x 7’ draft.
The scale of the project is immense but that is what spins Dick’s wheels. The photos above are from June 2021, so no doubt things have moved along even further – Enjoy 🙂

Input Below From Robert Nola 

"I have often wondered what became of the Melodeon on which I spent much of my boyhood. It was owned by my father Bob (Boze) Nola and his partner was Jack Raos (who did not fish) from 1950s to early 1970s…In those years they fished for Pearl Fisheries in Auckland. Now I see that it has been fully renovated. But then It used to be very different when we owned it. The wheelhouse was much narrower and the bunk area was in the bow. It was very stylish then.
It anyone would like to get in touch with me I would be glad to hear. The Melodeon was very much part of my youth. Glad it still survives. And is being looked after. It cannot be the same Kelvin engine my father installed?"