The launch Meteor / Comet II was built by Collings and Bell and is reputed to by at the time the fastest commerical launch in New Zealand, with a top speed of 36 knots, carrying 12 passengers. She plied her trade as a tourism launch on Lake Wakatipu, Oueenston, but also has been based out of the Bay of Islands, Rotorua, Picton and the Marlborough Sounds.
Just popped up on tme as a work-in-progress and sadly a long way off her original configuration.
33’ in length, these days she is powered by a Ford 180hp diesel engine – would be interested to hear what powered her in the zoom zoom days.
Classic Launch Kokoru Damaged In Pine Harbour Marina fire yesterday – refer the NZ Herald for details, its still a little to raw to go into details – more later. But I’m sure you’ll all be thinking of the owners.
When designed and built by Owen Woolley in 1968 the launch – Acheron started life at 38’ and the build took place in Woolley’s shed on the water’s edge of the Tamaki River, Pakuranga. She was constructed of single skin heart kauri with hardwood ribs. The design was a very popular concept for Woolley and he built several other boats later through a number of years that were more or less sisterships to Acheron.
Post launching Acheron spent 4> 5 years on a pile mooring in the Tamaki River, on the Panmure side of the river, near Ken Rickett’s parents house. Ken supplied the intel for todays story and the photos come to us from her current Wellington owner – Tim Prescott.
Harold Kidd has advised that Acheron was owned in 1973 by E & J Lane of Kohimarana, Auckland so given this date they may well have been the original owners.
Acheron’s past between approx. 1974 and 1991 is mostly unknown, until in 1991 she was relocated to Wellington by a Des Deacon, who had purchased her. Fast forward to 2005 when she was purchased by Tim Prescott. At this stage Acheron measured 44’ in length , with a 12’6” beam and draw 3’6’, the additional 6’ had been added to her stern giving her a bigger cockpit. In a December 2019 WW story on the launch Proteus, Neil Lineham commented he purchased Acheron in 1984 and had the extension done, by John Gladden, and with the additional 6’ she had a new top speed of 19 knots. Linehan owned the boat between 1984 and 1987.
Acheron is powered by two TS3 model 3DB-215 Commer diesels, which have been in her since new. They drive thru two 22″ diameter x 21″ pitch 4 blade propellers. The current photos of the engine bay confirm that they have recently been taken out of the boat & had a major overhaul by a TS 3 expert.
Are we able to fill in more of the blanks in her past in the 1972 > 1991 period? Not sure Mr Woolley would approve of the radar arch ………………. but tastes change with time 🙂
Update ex Paul Holdsworth – Owen Woolley built Acheron for Eric Lane an executive at NZI Insurance, my farther an engineer worked on Acheron’s Commer diesels that had a distinctive rumble to them. Owen built a smaller launch for Eric before he commissioned Acheron which was very similar to Allen Williams Banshee design. Before having these Woolley designs built Eric owned the Colin Wild Talua with mooring in Okahu Bay which was immaculately kept and regularly haul out onto the handstand at Okahu.
Update ex Ken Ricketts – post a lot of ringing around and emails Ken believes below is an accurate record of the boats owners – Built by Owen Woolley 1968, owned by E & J Lane 1973, bought off a Mr Furness (probably off the Lanes) & sold to Neil Lineham in 1984. Sold by Lineham c.1987. We have a 4 year gap, then Des Deacon bought her in 1991 and trucked her from Auckland to Wellington.
In 2005 Tim Prescott, the current owner purchased her, possibly from the estate of Deacon.
As mentioned above Lineham had John Gladden extend the stern by 6’, this work was done by John Gladden. Lineham was an engineer and has a substantial knowledge of the Commer TS 3 engines, he went to much trouble upgrading the horsepower of Acheron’s engines and making them quieter than is usual, for these engines.
Her radar arch was fitted in Wellington by or for Des Deacon. It was Tim Prescott, who has had the latest refurbishment of her engines done, by Mark Erskine a very talented TS3 engine expert, who Ken believes worked on the engines in – Invader and possibly Royal Falcon. Her top speed is now around 13>14 knots.
19-03-2022 Update ex Alan Sexton – Acheron was described above as being single skin kauri, I doubt this, per the article (refer Sea Spray below) all this series were built with multiskin diagonal planking. One change on boats after Acheron, eg Proteus and Accolade was the addition of the topsides knuckle.
Annual CYA Round Rangitoto Race & Cake Day BBQ
I made a late call to mooch down to Issy Bay to catch the tail end of the annual CYA round Rangitoto Race and Cake Day BBQ. Well thanks to the loyal launch group the day wasn’t a waste of time, as what seems to be the norm these days – not one classic yacht bothered to attend 🙂 Pacific cleaned up the prizes – first in the race (i.e. closest finisher to their handicap time) and first for the best looking cake – well done Nathan, Darren and crew. I’m sure the other results will be on the CYA website. Got to love the judging panel – 3 very well behaved kids – I suspect their focus was on getting first dibs on the cakes 🙂 Special thanks to Jason Prew from the Slipway Milford for organizing the BBQ and prizes ex Manson Anchors and Lawson Dry Hills wines.
The 1947 Lidgard built 36′ launch – Awarua has been hauled out at the Slipway Milford for several months. Her new owner righting some deferred maintenance, enhancing her internal layout to suit ’todays’ expectation re amenities, giving the engine a birthday and getting a JPPJ (Jason Prew paint job).
Awarua slipped back into the water on Saturday morning looking very regal, still a few internal jobs to be ticked off, as there always is. Her owner is a committed woody, this is the 2nd woody in the fleet 🙂
Awarua has appeared on WW numerous times – links below
Several WW readers gave me the heads up on the tme listing for the 36’ launch – Patina. She started life as a passenger ferry in the Marlborough Sounds, but these days is a live-a -board in Wellington.
We are told she was built in 1913. Looking at the stunning shaped stern – this date is possible.
A very sage woody told me once, when you buy a classic wooden launch, value wise, all you are buying is a floating shed for the engine and that is where the true value lives, in the case of Patina, that is so true. Back in 2007 she was re-powered with a 40hp Yanmar diesel that has only done 150 hours.
Anyone able to confirm / add to what we know about Patina?
Late 2019 Turongo the 1966 Salthouse built bridgedecker was for sale in Auckland, at nearly 56’ and with 640hp she is a very daunting classic woody.
A new owner was found in 2020 and Turongo sadly moved south to Picton, where after a ‘refresh’ that included alot of system upgrades, she changed hands again (another southern owner). Today we get to see her post the refresh and just prior to changing hands. A truely magnificent classic vessel that will bolster the classic woody fleet down south. Hopefully one day she will emigrated north again 🙂
Todays woody fits into the spirit of tradition mould – designed by Salthouse, and built be John Gladden and Fred Bailey, her owner of 32 years. Fred was the founder of Broadbill Lures.
Built from 3 skin diagonal heart kauri (below the water) and 2 skins above, then glassed over. Approx. 50’ in length with a 14’5” beam and drawing 3’5”.
The zoom zoom is via a matched pair of 220hp Detroit diesels delivering 13>19 knots.
Whilst I’m a vocal critic of flybridges added to classic woodys – Broadbill is a fit-for-purpose ‘workboat’ that the big game fishing crowd would call a ‘Custom Sportfisher’ and looks the part 🙂
She was for sale back in mid 2019, so probably has a new owner these days.
Almost 2 years ago the Wooden Boat Bureau found a new owner for the 1960, 40’Jack Morgan designed and built launch Kokoru. At the time she was calling Picton home and her new owners bought her north to Auckland and almost immediately hauled her out and into a shed. Kokoru was a very well maintained boat and in great presentation – but plans were afoot.
Yesterday I got a peek at the project – still a few bits and pieces to be signed off so today you just get to see her exterior and the new twin Yanmar 75hp engine installation (below)
The design and workmanship is faultless and very soon you’ll get to see the complete boat.
Regular visitors to this site will be familiar with my enthusiasm for the uber cool website – offcenterharbor.com (screen grab above), last year the crew behind OCH during CV-19 lock down pulled together a world first, an online virtual woody boat show and today I can advise that its on again in 2022. With a slight twist – this year access is complimentary thanks to the generosity of the OCH founders. Details below
And because I couldn’t not give you a woody treat today – check out this link to a great OCH video, it is one of my favorite videos, I’d be a little embarrassed if I told you how many times I’ve watched it 🙂 Its titled ‘Live Well: The Cruising Smack STORM BAY with Tim Phillips‘
The Show is a completely online event from February 18th-27th, which means you can enjoy this gathering of the world’s best classic boats from wherever you are (without leaving the comfort of your favorite chair).
Our friends at Off Center Harbor have used the power of the internet to put nearly everything in the world related to classic/wooden boats on one big interactive Google map…
WHAT’S “ON THE MAP” AT THE SHOW?
The Map – Everything related to classic boats is on one interactive Google map
Boats – Over 1,000 of the world’s best classic boats (with photos and details)
Organizations – Explore festivals, boatbuilders, clubs, museums, schools, etc.
Live Presentations – Inspiring presentations featuring experts on a variety of topics
People – Connect with other attendees anywhere in the world (right on the map)
YOUR BOAT COULD BE IN THE SHOW:
You can submit your own classic/wooden boat to be in the Show! Again, the Show is entirely virtual/online and will be open February 18th to 27th at ClassicBoatShow.com, and…
Calliope was built in 1951 and is a rare breed – the Chris Craft company introduced the 19’ RR (Racing Runabout) model in 1948. They were powered by a big block M series engine, as is Calliope with her Hercules 336 cubic inch (5.5L) straight 6, 158hp MGL engine. They were and still are today highly desirable craft, the production ‘hotrods’ of the day. And in their day they were the fastest Chris Craft built. Calliope these days exceeds 70 kph.
Calliope, a two owner boat, was restored in 2006 having spent most of her life on Lake Weston, Connecticut, USA. In 2008 she was judged 2nd in her class at the prestigious Lake Tahoe Wooden Boat Festival.Calliope sits on a brand new alloy tandem trailer. Imported into NZ by a serious collector who is running out of space so has made the call to pass Calliope onto a new owner.Interested parties, initially to contact waitematawoodys@gmail.com
What Would You Do If You Owned Calliope
You would attend events like this weekends classic and wooden boat parade at Lake Rotoiti (Nth Island) and I’m sure be judged best woody there. So woodys if you are anywhere near Lake Rotoiti this Saturday at 11am, park the car and take in the annual parade – over 75 classic boats will be mooching around the lake. Best viewing spot is the reserve (good parking and grass bank) just down from the Okere Falls Store, State Highway 33. Movie below from the 2021 Parade