Category Archives: Boat Sheds

Lake Rotoiti 2018 Classic & Wooden Boat Parade – 240+ photos

Posted on by
7

P1000863

P1000829

P1000832

P1000996

P1010062

P1010289

P1010292

P1010366

P1010375

P1010365

P1010498

P1010555

P1010607

P1010673

Lake Rotoiti 2018 Classic & Wooden Boat Parade – 240+ photos

Last weekend marked the 21st birthday of the Lake Rotoiti Classic & Wooden Boat Parade.

The parade is one of the icon wooden boating events in New Zealand, with each year between 70 & 100+ classics on display. The LRC&WB Association are very active & hold many events thru-out the year, but the parade is the highlight. You would struggle to find a more inclusive, welcoming group of people that each year open the parade & picnic to anyone with a classic or woody boat – sail, power, big, small.

On the day we ‘enjoyed’ a mix of weather from fine > light drizzle > rain > fine, this didn’t stop everyone having a blast but taking photos was a challenge at times – a little bit of editing hopefully has help out 🙂 The photos of the ‘speed’ boats doing a demonstration run (health & safety red tape means it can not be called a race) were shot with a very long lens, so a little soft focus.

Post the picnic, several boats headed off to the Manupirua thermal pools, which are only accessible via boat. To an Auckland boaty the concept of pulling up at a jetty, tying up, & enjoying a soak in a hot thermal pool is rather special + its licensed, so one can enjoy a refreshing beverage, very civilised. 

I would like to thank LRC&WB Association past commodore – Fraser Wilson, for the generous loan of his RIB, sure makes getting around & taking photos easy. 

Each year my LRC&WBP experience is extended & 2018 saw Robyn & I hosted at Florence & Rod Prosser’s waterfront property. Berthed at Rod’s jetty is the 1882, 25’ counter stern day launch – Firefly, which now has a playmate in the recently acquired 1930, 23’ Chas Robinson built motor-launch – Rainbow. There are several more boats in the stable but I won’t out Rob on the exact number 🙂 

In addition to their holiday home, Rod & Florence run a very funky, cool lakeside bach called ‘The Love Shack’ – its available for rent (via BookaBach, see link below). If you a ever looking for accommodation in the Rotorua area I would highly recommend it – see photos below – AND its got WiFi !!!!!      https://www.bookabach.co.nz/baches-and-holiday-homes/view/2381

I hope you enjoy the photo gallery as much as I do attending the event. 

AS ALWAYS – CLICK ON PHOTOS TO ENLARGE

THE LOVE SHACK

Screen Shot 2018-02-05 at 10.26.27 am

Screen Shot 2018-02-05 at 10.26.15 am

 

LAUGHING LADY – 1949 33’ USA LUDERS – COMMUTER / SPORT MOTOR BOAT REFURBISHED IN NEW ZEALAND

Posted on by
8

Screen Shot 2018-01-14 at 8.58.31 pm

 

Screen Shot 2018-01-14 at 8.58.44 pm

P1260149

P1260199

P1260203

P1260207

P1260204

P1260210

LAUGHING LADY – 1949 33’ USA LUDERS COMMUTER / SPORT MOTOR BOAT REFURBISHED IN NEW ZEALAND
Yesterday, I was privileged to join a small group of friends of the extended Dreyer family at Omaha wharf to celebrate the re-launching of Laughing Lady, owned by brothers James & Michael.
 It’s hard to believe it was over 4 years ago that I first talked to James about the purchase of Laughing Lady in the USA & where would be a good home for her during her restoration. Given James overseas work schedule & desire to be hands on with the project, there really was only one option – the Whangateau boat yard, so that was where she went, just under 4 years ago.
With projects of this size & standard – the end result is always a reflection of the number & calibre of people that have ‘rubbed-up-against’ the vessel, in LL’s case there have been a lot – from Pam, George, James & an army of friends & family. As time ticked on & a re-launch date was set, more wooden boat artisans were roped in. Having seen LL in the flesh, the photos above do not do justice to the work that has been done on her, everyone should take a well deserved a bow.
I was very pleased to see that the project has been a restoration, not a rebuild, James & Michael have kept most things as close to ‘as-launched’ as possible – sure there is modern material & technology in play but its tucked away out of view – the GPS / nav unit is a perfect example, when not needed, it drops down out of sight – very James Bond.
Stunning boat, but the big question, where to keep her – anyone got a vacant boat shed for hire?
I hope you enjoy the photos as much as I did taking them.
The old lady has had a lot of air time on WW – click the clinks below to view the process (top > bottom) – enjoy
This link will show you photos of her being re – floated https://www.facebook.com/287523138699/photos/rpp.287523138699/10155947222558700/?type=3&theater

KOTARE – Sailing Sunday

Posted on by
2

Unknown-3

Unknown-1

KOTARE – Sailing Sunday 

I spotted Kotare (Maori = Kingfisher) last week on the grid at Rocky Bay, Waiheke Island. Her owner Don Fraser, was giving the bottom a scrub & a coat of anti-fouling. 

Don commented that the yacht had spent most of her life at Waiheke, excluding a few stints on the mainland.

 Don knows a little about her past owners e.g. she was owned & kept atRocky Bay in the 1970’s by retired merchant seaman Richard Powell.  However Don is very light on intel re her provenance – any woodys able to help Don out?

 

Woodys On Holiday @ Waiheke Island

Posted on by
5

P1250935

P1250947

P1250964

P1250967

P1250988

P1250991

P1250998

P1260045

Woodys On Holiday @ Waiheke Island

 Good morning Woodys – the 1st ‘live’ post in 2 weeks & I have to say I have enjoyed the break from the daily task of creating a WW story. Sometimes with everything else that happens in life its been a challenge, I’ll keep on with the daily stories but just a heads up, the frequency may change……… but business as usual for now.

I was amazed at the viewing audience over the Xmas / NY period, there were some huge days – the “Gunk-Holing Up The Weti River’ story had over 6,000 views in 24hrs, not bad for a ‘re-run’.

Despite the weather forecast & a broken freezer we got away on Raindance for 8 Days, came back a little early due to the weather bomb, & so glad that we did. 

For the 8 days we just mooched around Waiheke Island & had stunning launch weather + the water temp was amazing, warmest I can recall in a long time. 

I spotted quite a few woodys around the bays, if I missed getting a photo of you, either the light was all wrong or I was doing something else – so sorry in advance.

Last ones of Raindance were taken by Richard Darke from aboard his launch ’Seafarer’, many thanks Richard, I do not get many of Raindance, normally she is the camera platform.

A word of warning, last weeks storm has deposited some very ugly logs around the inner harbour, so keep a look out. It amazes we no-one (Akl Council etc) gathers them up, they will find there way back into the water & be an even bigger hazard. The one below was on Cheltenham Beach, Devonport.

If you have any photos from the holidays – email them in to waitematawoodys@gmail.com

F61E033F-6873-4604-AB1A-529439FDE85F

While ashore at Oneroa I picked up a flyer for The Island Grocer store, very clever piece of creative 😉

Island Grocer

Ballerina Restoration – Revisited

Posted on by
1

 

IMG_0834

Haul out at Omaha

Haul-out

 

Rot behind port sliding window
Port side repairs underway
Re launch Omaha
New fore-hatch
Finished port cabin side
New duck-board
Colin Brown
Finished cabin sides /deck

IMG_0832

BALLERINA REFURBISHMENT

photos & details ex James Groenhart

I spied Ballerina at Mahurangi during the 2016 Regatta weekend & she was looking superb. James told me she had recently spent 5 weeks in the care of Colin Brown & Dave Walker at Jones Road, Omaha (same site as Anita Bay & Little Tasman). While she was structurally in great condition there were some areas that needed attention.

Colin & Dave completed the following work to a superb standard, & interpreted what James wanted perfectly, as well as being completely sympathetic to the character of the boat.

  • A new hardwood worm shoe was made & fitted.
  • Mahogany cabin sides & coamings were taken back & minor rot repairs carried out, particularly around the sliding side windows & timber fixed window beading.
  • Butterfly skylight hatch was restored & glass re set to stop leaks.
  • A new timber forehatch was made & fitted.
  • Duckboard deck was replaced.
  • Cabin top grab rails removed, restored & re fastened.
  • Repainted hull (using Altex ‘Classic White’), cabin sides & deck.

Great to see work like this recorded so thoroughly.

Click photos to enlarge.

Another Record Viewing Day Yesterday !!!!!!

Which Boat Today ? Revisited

Posted on by
Reply

Which Boat Today ?

If your names not Tony Stevenson that’s not a question many of us ask ourselves. When I picked up the Jan/Feb issue of the uber cool kiwi lifestyle magazine – NZ Life & Leisure, I discovered that there is someone else out there that’s been bitten by the classic boating bug, big time 🙂 Enter Charlotte & Richard Stevens, their menagerie of boats includes – ‘D’Urville’ a 70′ kauri, Laurent Giles designed motor boat, built by McMullen & Wing in 1975 – ‘Mickey Mouse’ a 1967 Ford 10 powered Albatross Motors speedboat – ‘Carvel’ their exquisite 1962 Norm Keen designed & built lake boat – a Frostbite, a Lazer, numerous canoes/kayaks & paddle boards AND a 45mph V8 powered ski boat. That ww followers is an impressive collection.

The article is a both a great read & a wonderful visual insight into the life & boats of Charlotte & Richard & we thank them for sharing it with us.

Todays post has been reproduced with the permission of Fairfax Media. The spectacular photos are from the camera of Tessa Chrisp & the words from the typewriter of Rebecca Hayter (NZ Boating editor). Check out the magazine at their website     http://nzlifeandleisure.co.nz

Note: if the images above are a little hard to read – you can view it here as a PDF file, click the blue link 😉

Lake Rotoiti

Restoring & Installing a Gardner in Arethusa – Revisited

Posted on by
4

Restoring & Installing a Gardner in Arethusa

story & photos ex Dean Wright

It not often I get sent info on a boat & it jumps the queue & appears on ww the next day. If you have been following on ww the rolling restoration Dean has been doing on Arethusa over the last few years you would know two things, Arethusa is in very good hands & Deans a very talented commercial photographer. So the links below to Deans latest project – the restoration of a Gardner 4LW & subsequent installation in Arethusa are well worth check out.

Restoration     http://deanwright.co.nz/arethusa/log-arethusa/152-gardner-4lw-diesel-restoration.html

Installation      http://deanwright.co.nz/arethusa/log-arethusa/154-installing-the-gardner.html

Some history below

Arethusa ticked over 96 this year. She started life as a gaff rigged cutter, built by Bob Brown (designer of the Z class) at Sulphur Beach, Northcote. She’s carvel planked kauri, 33′ 4″ LOA with a 12′ Beam. With the aid of a fair bit of ballast she weighs 10 tonnes. She’s had an interesting life, more details here http://deanwright.co.nz/history.html

Electro-Chemical Damage In Wooden Boats Update – Revisited

Posted on by
4

rudder electrochemical damage

 


ELECTRO-CHEMICAL DAMAGE IN WOODEN BOATS UPDATE
A Special Post By Chris McMullen

Recently I received a note from Chris where he questioned if the story we posted last year on ww about electro-chemical damage to wood  was a little too long & were people reading it. Well I can tell you that the post is the single most visited story on ww, ever, & gets read by people all over the world. Its frequently referred to on the hugely popular WoodenBoat Forum in the USA. The link below takes you to the original story.

Electrochemical Damage To Wood – the marine version of ‘leaky homes’

For the impatient ones out there 🙂 Chris has done a ‘Readers Digest’ version & refers to a vessel that recently featured on ww.
I encourage all of you to read today’s story & if you own a classic wooden boat – read both versions – the problem is the biggest risk to the life of our classic boats.

In Chris’s words:
“I received the above disturbing images of another woody being destroyed by an owner who I believe is unintentionally loving his boat to death.

The use of anodes and bonding on a wooden boat is fatal. The cathode or protected metal makes hydrogen gas and this combined with saltwater makes Sodium Hydroxide (Caustic Soda). This chemical is used to pulp wood in the paper making industry. Not on my boat thank you! I say again, there is no reason to use anodes and bonding on any boat. The only exception, steel hulls require anodes. If copper or bronze are being corroded it is due to a positive DC leak and Zinc anodes will not help. Find the electrical leak is the cure. If there is brass or manganese bronze underwater it will corrode due to the
zinc in the alloy. Anodes will possibly stop the corrosion but at the expense of wood damage. A better plan is to replace the brass with proper marine bronze.

Bronze and copper should last indefinitely in the sea. To prove that statement, I ask you to look at the Roman coins and artifacts salvaged from ships wrecked in the fourteenth century. There was no anodic protection and the metal is well preserved. So what is the difference to the copper and bronze on your boat? There is absolutely no difference so why waste your money buying anodes that will in time destroy
your wooden boat.

Three or four bottles of wine will cost the same as anodes and will make you and your boat happier.”

Note: ww is read all around the world, if there is water & boats, there are people reading ww. So a little about the man for non kiwi’s  – Chris is one of NZ’s most respected boat builders (retired) and at one time was the Lloyds (Honorary) Wood Boat Surveyor in Auckland. Chris’s (the original company) ‘McMullen & Wing’ built and repaired wood, steel and marine aluminium vessels. They built the first welded aluminum vessels in NZ. Chris is the current holder of the Classic Yacht Association of New Zealand ‘Outstanding Achievement Trophy’ for services to classic boating.

14-05-2016 Photo Update
Gavin Gault sent in the below photos of a Nova skeg floor that he believes were probably damaged due to engine – anode bonding failure. Pretty graphic !!

 

10-07-2016 Reply from Chris McMullen

“Wow. Thank you Gavin Gault for sharing your very graphic images. Very sad, small consolation but yours will not be the only wooden boat affected by this scourge.
Maybe, at last some of the Flat Earth Society will start to believe what I have been saying. The worst detractors are some in the Marine Industry who have been preaching the Anode, Bonding party line for years.  Now there is no where to run for cover,  they continue to conjure up excuses and it seems, refuse to accept a simple scientific fact.
“If you have a positive and negative electrode in salt water, the negative cathode or protected metal makes hydrogen gas and this combined with salt water makes Sodium hydroxide.”
This chemical is also known as caustic soda and removes paint and destroys wood.  There is no doubt about this fact. You do require a power source and bonded dissimilar metals ( zinc and copper) provide sufficient current to do the damage, but slowly.
If there is a negative DC leak (to the sea)on a bonded boat the process is accelerated. If there is a positive leak any metal becomes an anode and will waste away. It is important to isolate the DC power from contact with the sea. Again bonding is just asking for trouble. Please remove Anodes and Bonding from your wooden boat now!
Chris McMullen”

06-09-2106 In case you were not to sure what to look out for – the below photo should be a wake-up call to a few woodys 😉

IMG_1120

 

New Zealand Classic Wooden Boat Register – 200+ Photos

Posted on by
7

image1

New Zealand Classic Wooden Boat Register – 200+ Photos

Stoked to be able to share with you the 2018 edition of the CYA Classic Register. Big ups to the CYA team behind it, pulling everything together is a massive undertaking, I’ve been there & done that, having been involved with the first 4 issues – 2018 is a winner, so make a cup of coffee or pour something a little stronger & sit back & enjoy over 200 photos. Click link below

to view https://www.yumpu.com/en/document/fullscreen/59612422/cya-classic-register-2018-yum

Lucky CYA members will be getting a free hard copy version in the post very soon. Almost worth joining to get a copy 😉 Membership details here  http://classicyacht.org.nz/joinus/

Mystery Clinker & Engine

Posted on by
2

Screen Shot 2017-12-13 at 4.47.14 pm

Screen Shot 2017-12-13 at 4.49.59 pm

MYSTERY ENGINE

In the latest Lake Rotoiti Wooden Boat Association newsletter, one of the members, Andy Hammond, was looking for help to ID the engine in his 14’ clinker run-about.

Andy commented that the engine was a proper marine unit with F & R gearbox, and almost certainly “Made in England” as it says so on the fuel filter housing. Also has A/F spanner sizes.

Any woodys able to help Andy out on the engine? & what do we think about the design of the boat?