Midnight – Sailing Sunday

MIDNIGHT – Sailing Sunday

Today’s story comes to us from Ross Dawson and dovetails with the story earlier in the week on the launch – Midnight II. Both sparked by Ross’s visit to see Peter Chamberlin in this retirement village. I will let Ross tell the story ‘

“The Yacht “Midnight” 34 tons according to press reports of the period, was brought out from the UK and generally under the command of Charles Chamberlin snr., with newspaper advertisements and comments indicated Charles had a paid crew. On the other hand according to Brian & Jan Chamberlin’s family history,…”the cutter ‘Midnight’ appeared on the scene (1853), having been built to Charles’s order by Henry Nicol, a noted North Shore builder.”

There are many newspaper references during the unsettled times around 1865-70, that Charles made the vessel available as an armed cutter, manned by naval volunteers to patrol the Hauraki Gulf and beyond. On one occasion she ‘rescued’ Governor Sir George Grey from potential capture from his Kawau Island home. Another records Midnight arriving in Auckland 4.3.1865 from Tauranga bringing first news of the murder of Volkner near Opotiki.

Other shipping news was more prosaic…”Midnight arriving Auckland from Ponui with 9 bales of wool.

In 1870, the NZ Herald reported Midnight had a 16 day “stormy passage’ to Tonga, and later the death by drowning of her Captain Courthoys at Levuka. I understand Midnight was lost on this voyage, refer below.

Briefly (& anyone interested can find the full account in the Daily Southern Cross newspaper of 12.6.1871)…”the Midnight sailed from Levuka on Saturday last, on a pleasure trip to Mologai (sic) (Malogai Island)…the vessel was hove to outside the reef for the night, but due light winds and strong currents, drifted onto a shoal about 2.30am. Every attempt was made to get her clear. All anchors being lost. In the morning  a schooner was sighted and a boat was sent over the reef. Mr North, mate of the Midnight asked for a loan of a kedge, or to take a line to a shoal a short distance to windward. The boat returned to the schooner (America) and to the astonishment of those on Midnight, the America made sail and left all hands to their fate. The crew built a raft and with some assistance from a vessel from the island Midnight was abandoned and they made for Passage Island, eight miles away. They were rescued on Tuesday by the schooner Mary sent from Levuka in search of Midnight. It was assumed Midnight slipped off into deep water sometime on the Sunday night that the crew left the stranded vessel. (Story from Fiji Times May 20 1871)

As far as sorting who built Midnight…either in England or by Henry Nicol in Auckland, I have not come across any definitive information. But trawling through the Daily Southern Cross, one is amazed at the large number of ships of all sizes that traded out of Auckland, many locally built.

Henry Nicol who apparently came to Auckland from Scotland aged 23 was an amazingly prolific shipbuilder, initially from a yard on what is now the corner of Vulcan Lane & Queen Street and soon after from his yard in Mechanics Bay, hard up against the slope of the rising land toward Parnell (well before the extensive reclamation extending out toward the current waters edge).

The Daily Southern Cross of 1853 when the 97ton ‘clipper schooner’ “Waitemata” was launched, reported Nicol had built since 1849…647 tons of shipping,…Moa 281 tons;Hawkhead, 22 tons; Eliza, 55 tons;Julia Ann, 28 tons; Rose Ann, 39 tons; Favourite, 28tons; Te Tere, 27 tons; & Waitemata, 97 tons. Not to mention 5 half-decked boats from 10-18 tons!

Possibly Nicol produced the Midnight shortly after the above as the family booklet “Ponui & Beyond” by Brian & Jan Chamberlin states…”In 1853 the cutter Midnight appeared on the scene, having been built to Charle’s (Chamberlin) order by Henry Nicol.

This whole story has a slight personal note as my Gt Gt Grandfather Joshua Robinson, with a team of his carpenters worked for Henry Nicol, although my family record indicates that Joshua was employed by the well known trader William Smellie Graham on his various construction projects, including Nicol’s building of trading vessels for Graham. My Robinson history states…that ” Nicol built 43 vessels in the first 10 years, all work done by hand until 1856 when machinery was installed for sawing timber.”

Just to give a glimpse of Nicol’s work ethic….The DSC of 24.2.1854 tells us…”launch schooner 40tons, Tamatenaua. Cutter 30tons nearing completion. About to lay keel for schooner 112-120 tons”….all with saw and adze…the chips must have been flying!”


Harold Kidd Input – MIDNIGHT was built by Henry Niccol in 1863 according to the Register of British Ships No 57810. She replaced Charles Chamberlin’s VICTORIA.

Imatra And Her Builders Story

Tamaki River, Auckland

IMATRA And Her Builders Story

A little while ago Mark Erskine wrote in regarding the 123 year old Stow & Sons gaff yawl racing yacht – ‘Imatra’ which was sailed to New Zealand in the late 1930’s or 40’s and purchased by the then Mayor of Auckland. Mark used to give her a passing glance on his travels, she is berthed in the Tamaki River,  but over the last few years he hasn’t checked but I can confirm that she is still barely afloat. The last time Mark saw her she was in poor condition, at the time owned by John Hayman, we are unsure who currently owns her. Can any of the river rats enlighten us on the status of Imatra?

Mark also supplied a link to a Youtube video on Stow & Son, master boat builders.  https://www.youtube.com/watch?v=VBBVcrmj9qE It gives wonderful insight into just how remarkable their productions were / are. Very humble boat sheds, humble tools, all yachts made by hand, but by craftsmen from the best quality seasoned timbers (oak frames seasoned for up to 16 years, mahogany, rosewood, walnut, pitch-pine, teak, etc) and the sheer quantity of huge, high quality racing yachts and boats made by this firm boggles the mind. The production numbers don’t seem possible for the size of the business, and clearly shows this company were at the very top of their game.

A few Stow & Sons yachts survive fully restored and are worth millions. 

If you Google:

  • “1904 Rosalind yacht”
  • “1913 Harbinger yacht”  Sadly, “Harbinger” was lost at sea a few years ago. 

Input From A WW Reader

The Imatra article today jogged my memory. Imatra was designed and built with a gaff yawl rig and was sailed to NZ in that configuration (see photo) below. Much later, she was modified to her current rig here in NZ. Current owner, John Hayman claims the modifications were carried out by a young Peter Blake, after Hayman damaged her magnificent timber main mast. The current alloy mast looks very much out of place and just adds to the current distressed condition of the yacht. Hayman was also responsible for the awful cabin addition. He claimed the construction was carried out at Baileys. The original rear (aft?) mast postion behind the rudder post was also removed and brought forward of the rudder post. Hayman claimed this was also by “Blakey”.

The yawl ‘Imatra’ under sail, 1913. (Photo by Kirk and Sons of Cowes/Getty Images)

Input From Harold Kidd – IMATRA left England for NZ in December 1948. Ernie Davis bought her in 1949. L.J.Fisher owned her later then A.M. Jenkinson (1964) then Jack Hayman. SOMEONE’S GOT TO DO SOMETHING!


Input From Russell Ward – I crewed on her Christmas 1964 when she was owned by seafarer and car dealer Arthur Jenkinson – He was a mate of Athol Rusden and is mentioned a lot in the latter’s autobiography “Rascal of the Pacific” It is a cracking good read and puts him in perspective. Athol had the 60’ woody Paulmarkson built by Percy Vos in 1970. She was renamed Dionysus RIP.
Jenkinson had pulled the masts out and was rebuilding them when I crewed. He said he was re-gluing parts so I guess there was rot.  She was substantially original below – lovely paneling etc etc. I think she had a piano aft end of the saloon. Wasn’t much for me to do since we motored everywhere.Arthur reckoned she had too much lead aft and that the engine (a Lees 100 hp Ford) ballasted her too much aft. I last saw her on one of the slips at St Marys Bay a year or so after and Arthur was gas axing and hacking a large piece of lead off the aft end of the keel by the rudder post –would have been a ton or more. I lost touch with her after that and she seemed to spend most of her time up the Tamaki. The boxy cabin aft was quite a fine piece of woodwork but the original doghouse was lovely.The picture below is of her at Cooks Lower Landing alongside Skip Lawler’s ex RNZN Fairmile – Ngaroma

27-11-2022 UPDATE – Have just been flipping thru some old ‘scrap books’ of NZ yachting press articles and came across the below – the 1st is dated 30-07-1974 ex the NZ Herald

The bottom two are ex Sea Spray magazine June 1978 edition

03-03-2025 INPUT FROM A CONCERNED BOATIE

Photo below of the vessel Imatra which is looking in a sad state in the Tamaki river.

It is lying on its side so when the tides in its half submerged in water.

Seems a sad end to a boat that’s probably one of the oldest in New Zealand.

Manaia – A Peek Down Below

MANAIA – A Peek Down Below


Manaia has made several appearance on WW, link below the backgrounds her early days . She was designed by Alex Collings and built in 1965 by Percy Vos. Now thanks to a nudge from Alan Sexton and tme – we get to see the results of some of the recent work on her. She is looking very smart for an ex Harbour Board Pilot boat 🙂

Currently offered for sale but you’ll need a 25m marina. Contact waitematawoodys@gmail.com

Previous WW story link below
https://waitematawoodys.com/2018/01/26/manaia/

Liberator

LIBERATOR

Bay of Islands woody – Marcus Petraska snapped the top photo of the Jorgensen built ex workboat – Liberator tied up last week at the Russel wharf, one of the smartest ex workboat conversions afloat. Possibly still owned by Grant and Semmens.

The second photo was taken by Dean Wright, also in the BOI’s over the 2019/20 summer cruising period.

Can anyone tell us more about Liberator?


A CALL FOR HELP – Where Can You Buy Pitch

I have been contacted by boat builder, Ron Hackett in regard to sourcing pitch, Ron used to get it from the Shell Co in Whangerei. He has tried Z, Marsden Refinery, and a company that re-uses old tarseal, but no joy. Does anyone know if you can still buy it and if so where. Also can tar be substituted for pitch? Ron wants to put some in the bottom of an older wooden boat. 

Koputai – Work Boat Conversion

KOPUTAI – WORK BOAT CONVERSION


Requests for info on boat on WW can be a lot like paying the pokie machines – you ‘feed’ the machine and pull the handle – sometimes it spins and nothing comes up, most of the time we get a small payout, just enough to keep us motivated to keep playing – then sometimes you hit the jackpot.

Today’s story is a jackpot pay out – starts like this – over the last 5>6 years the 1939, 56′, Miller & Tunnage built – Koputai has popped up on WW and we have been trying uncover more of her history. Back in May 2015 she was for sale and the then owner, the late, Louey Sandiant told us everything you would want to know about the photo + photos. Then in Sept 2020 Keith Foster, who purchased Koputai off Louey contacted WW and supplied some updated photos and a request for any further intel on the boat.

It took a few months but Matt Siddells made contact and advised that his grandfather – Russell Bramwell purchased Koputai as a retired pilot boat and did the conversion to pleasure boat. Matt has very kindly shared the gallery above of photos from the family album. You can see and read more about Koputai at the WW links below


2015    https://waitematawoodys.com/2015/05/03/koputai-sailing-sunday/
2020    https://waitematawoodys.com/2020/09/06/koputai/

Manu Moana

MANA MOANA


Built in 1975 at the Salthouse yard using 3 skin kauri. Powered by twin 425hp Detroit diesels, giving a max speed of 16knots and cruise of 10 knots. Mana Moana  at 59’ in length, has a 18’ beam and draws 4’9″ but what sets her apart from most other woodys of the that length is the volume – she is huge – as an example – 3 cabins, 3 heads and 4 showers.

Originally built for the German Consul and then skippered and bought by John Pulham from Tauranga. Ken Winter was the next owners from 1982 > 1992. 
(Tech & ownership details supplied by Allan Winter via K Ricketts) 

AUCTION OF VINTAGE NAUTICAL INSTRUMENTS

Chris McMullen gave me a heads up on a very special auction of vintage nautical instruments taking place tomorrow at the Cordys auction house.The items are from The Harvey Sheppard collection, a close friend of Chris’s – Link below to website / catalogue. https://www.cordys.co.nz/auctions/D002/catalogue

3 Classic Yacht Collisions In 2 Weeks…….

Library image ex Ingrid Abery

WHAT IS GOING ON WITH THE A-CLASS CLASSIC RACE FLEET – EGOTISM, ARROGANCE OR JUST INCOMPETENCE ?


You may have missed my comments at the bottom of Mondays WW story, and over the last 48 hours it has emerged that in the last two weeks we have had three serious incidents involving three different A-Class classic yachts, I have detailed descriptions of each incident, but I’ll stay out of the technicalities. Questions of the day – is there a review underway of these incidents? who takes responsibility for the circumstances surrounding the incidents i.e. race starts and finishes? Are there health and safety procedures in place for the ‘worst case scenario’?.

Even if you put any blame to one side, 3 incidents in 2 weeks………………… something is amiss. Me thinks it is time for a fire side skippers chat on rules and good manners.


INCIDENT ONE – Mahurangi Weekend – Sunday Morning – A Class yacht (under power) collides with classic launch – I understand no apology from yacht

INCIDENT TWO – CYA Race Mahurangi > Auckland – Sunday Morning – A Class gaff yacht T-bones another vessel at the start – Other vessel on starboard – near sinking

INCIDENT THREE – CYA Round Rangitoto Yacht Race – A Class gaff yacht collides with finish boat (classic launch) – Again no apology, just laughing


The CYA has its major annual sailing regatta coming up next week – if you’re out and about in your boat- might be a good idea to fender up 😉

22-02-2021 Input From Robin Kenyon

Re Racing at the MCC regatta:
I think safety at Mahurangi was greatly improved this year by having the A class racing the outer loop first, therefore greatly reducing the time spent racing in the confines of the estuary and other racers/spectators. My big plea to the organisers would be for the MCC to affiliate themselves to Yachting New Zealand. Then the racing could be held under the more familiar (to racing and coastal sailors) Racing Rules of Sailing. This would remove a large degree of uncertainty that exists when racing at Mahurangi and help prevent a future accident in waiting. Every other race that the A class does uses these rules, not the COLREGS (except on passage races outside the hours of daylight, I believe). I appreciate that this incurs a cost to the MCC but surely the levy to YNZ is just what has to be done. The vast majority of other clubs in the country pay it.
I have raced regattas in countries all over the world and this is the only one that I have been to that uses COLREGS for daytime racing.
Uncertainty could breed the attitude amongst some that might just blag their way through a fleet rather than abiding to the very clear and proven racing rules of sailing. Stating that their will be no protests must only add to these competitors feeling untouchable.
Whilst this is only one aspect covered by the comments above (and thankfully there were no serious accidents at this years regatta yacht race) I think it has some relevance to the bigger picture. I must have done about 10 Mahurangi regattas, all racing on the A class. The heated on the water interactions for this race are often worse than any other race in our calendar.
Which is a shame for a fun event and a true highlight of the season. It doesn’t need to be that way and using the Racing Rules of Sailing can go a long way to address this. The COLREGS were never written with sailboat racing in mind. That is what the Racing Rules of Sailing are for. When skippering an A class around the harbour the skippers have enough on their plate without having the rethink the rule book.

22-02-2021 Update ex the CYA Feb Newsletter – lets hope they read this, tucked away at the bottom of the newsletter 🙂

Big Boats In The Bay

ADVENTURE
MONOWAI III

BIG BOATS IN THE BAY

Dean Wright recently slipped the lines on Arethusa and has been mooching around the Bay of Islands. Today’s gallery of photos includes the very salty looking Adventure in Deep Water Cove, also there was the Auckland woody – Callisto. Also featured is Andy and Brenda Bell’s Monowai III and Jim Ashby’s Olga, Dean commented that Olga is a serious bit of kit. She sure is, looks like you could go anywhere in her. Would love to know move about Olga, can anyone give Jim Ashby a nudge and ask him to send WW some background on the boat.


Lastly we see the remains of the burnt out Fleming 55 being lifted from the bottom between Moturua and Motukiekie Islands on Saturday (13-02-21), post the lift Dean saw the barge heading out to sea – probably for a deep water burial, anyone able to confirm? Photos of the boat fire here https://waitematawoodys.com/2020/12/31/summer-woody-boating-in-the-bay-of-islands/


The only downside of Dean’s reporting is we never get to see photos of his stunning woody – Arethusa 🙂 see below

https://waitematawoodys.com/2020/09/07/arethusas-new-woody-wheelhouse/#jp-carousel-49128

ARETHUSA

Mahurangi Regatta – Woody Weekend – 196 photos

MAHURANGI 2021 REGATTA –  196 WOODEN BOATING PHOTOS & VIDEOS

WoW what a weekend – perfect weather, perfect location and as always stunning boats. We saw a record turn out for the classic wooden boat parade on Saturday morning – the crowd ashore at Sullivans was a little thin on the ground, but if we are honest, we do not do it for them – its all about us 🙂 , a little like going for a motorbike rumble. We need more events where we just ‘hang-out’ together.

The regatta’s main event – the yacht race appeared to be a big success, the A-Class Logan –  Rawhiti, in the hands of her new owner – Peter Brookes, cleaned up all the major trophies. As has become the norm at Mahurangi races, the results process was a total balls up, it was very dark and late into the night before the final, final results were announced – fingers crossed its all kosher, last year it took days and numerous oops lets try that again announcements 🙂


The big band beach BBQ, was a hit, perfect on all fronts – weather, tide, the band, bbq’s and the people. Given the number of boats in Bon Accord Harbour, Kawau Island, most people headed there on Sunday. The Kawau Boating Boat was bursting at the seams but handed it well. I have split the photos into 4 galleries – Classic Wooden Boat Parade – Yacht Race – Beach BBQ – More (includes Kawau). If I missed your boat, you were somewhere I wasn’t, or in the wrong light , or your’e boats ugly (joking – sort off).
Enjoy a peak at the weekend., click individual photos to enlarge. Next weekend I’m off to the Lake Rotoiti Classic and Wooden Boat Parade –  its a biggie – they have 70+ entries  

CLASSIC WOODEN BOAT PARADE

YACHT RACE

BEACH BBQ

MORE + KAWAU ISLAND

waitematawoodys@gmail.com

Te Rauparaha QO7 – Gets A Make-Over

TE RAUPARAHA QO7 – GETS A MAKE-OVER


Back in 2013 we ran a story on the 1938 Chas. Bailey Jnr. designed, Chas. Bailey & Sons Ltd built 55’ launch – Te Rauparaha. The focus then was what had happened to her and where was she. Good chat (link below) uncovered a lot – we discovered in 1979 she went to Noumea, New Caledonia under her own steam to start life as a charter vessel, and was renamed Samara. https://waitematawoodys.com/2013/05/22/te-rauparaha/


Fast forward 7 years and I get an email from her owner Valk Delevaux from Noumea, included with the email were the photos above. I think I could safely say that the Bailey family would struggle to recognise the boat they designed and built. But any owner has the right to do what they want and its only wood so someone else might one day convert her back closer to original. I understand she is for sale so if you’re looking for a old/new woody………………….

21-01-2021 Update – the engines are 2x300cv Cummins Bt06. Drive is the same but with a all new hydropique system.