A Spot of Koha – Seafood or Vension for Boatbuilding Guidance

Unknown

A Spot of Koha – Seafood or Vension for Boatbuilding Guidance

The owner of Cobweb, Matt Debono has sent me an unusal request, I get a lot of  WW emails but this one was a first. I have included it below, just as I received it.

“This is probably not a usual e-mail for you. I send you this because of the passion you have for wooden boats. In saying this my yacht Cobweb isn’t even a classic wooden boat. She is a 35ft Laurie Davidson design launched in 1975 with a 3 skin kauri construction under glass… modern classic?

I have recently purchased Cobweb as a bit of a project as I wanted to learn how these wooden boats were constructed and learn some skills myself as the craftsmanship that goes into them astonish me. I saw her potential as a good yacht and got her for a good price. What I am asking for is if you know anybody in the South Auckland region that may share the same passion who has some experience in boat building of this nature who may want to pass some of their skills and experience on to a younger guy like me.

As you can see I have Cobweb sitting on my front lawn, I have opened her up and I’m not too far away from scarfing the inner 2 skins after I let the timber dry a bit. I have all the tools and machinery required however a bit of guidance would go a long way. Whoever comes to help could obviously expect a reward, I can fill freezers up with Venison or seafood fairly easily… or pay cash.”

So woodys, if you have the skills & an empty freezer – drop Matta note mpdebono@hotmail.co.nz

Lots of photos (50) on Monday from the Lees Boatbuilders shed visit 😉

Mahana

Screen Shot 2018-05-10 at 9.35.43 am

Screen Shot 2018-05-10 at 9.37.27 am

MAHANA

Mahana being built in c.1975 by Atkinson falls into the ‘Spirit of Tradition’ category. She is a biggish girl – 46’ LOA & is pushed along by a 315hp Yanmar.

Ian McDonald commented that he was on board Mahana up Kawau Island some years ago. She was then powered by a big old 6 cyl Foden and was owned at the time by two brothers connected with Rinnai NZ. She is strip planked. Ian next saw her in Picton marina about 2008.

Home these days is the Marlborough Sounds & she is for sale on trademe.

Do we know any more about her past life?

16-01-2023 Update – new photos ex tme listing

 

 

 

 

Classic Woodys at Sandspit Marina

P1030047

P1030090

 

 

P1030025

Classic Woodys at Sandspit Marina

A couple of weeks ago I was up Sandspit way & spent an hour or so mooching around the new (ish) marina. Very impressive set up & with the yacht club’s haul-out facilities its a prefect spot to keep a woody. The real win win factor is the proximity of the ‘Greg Lees Boatbuilder’ yard, in recent years Greg & his talented team have rubbed the magic wand over some of our finest classic woodys. Just type Greg Lees in the WW search box to see the level of workmanship & perfection.

I have included a few photos of the motor camp where I stayed with my ex woodys boater – Chris Miller in this stunning motor home. 

A real bonus was the amazing meal & service we had at the Sandspit Yacht Club on Saturday night – I was expecting burgers & fries but no – everything – décor, service & the food was superb – check it out if you are up that way. The scallop entree was as good as anything you would get in Auckland City. Photos below.

IMG_2942

Update: I have been sent by Dean Wright the photo below of the dinghy ‘Tiki’ in happier times 🙂

Unknown

Very Cool Classic Sailing Clinker Dinghy 4 Sale

Unknown

 

Very Cool Classic Sailing Clinker Dinghy 4 Sale

I was contacted last week by CYA buddy Dan Renall who pointed me in the direction of a woody that was looking to off load one of his dinghys. Wise man, very few that get bitten by the bug are able to let them go.

Owner Drew Hayward has a classic launch that he keeps in the creek on the way out of Kawakawa Bay. He also has another clinker so has decided to part with this one. 

Details are – 14’, built by boat building tutor, Keith Aitkenson of Carrington Tech. Kauri planks with steam bent hardwood ribs. Her sails are by Boyd & McMaster. Mast is solid Oregon, as is the boom & gaff. Drew commented that as pictured above the hull needs a little clean up – mainly mould.

Anyone interested in this woodys should initially contact Drew Hayward via email  drew1949@icloud.com A very cool gift for a young woody, so come on dads & grandads – its the perfect way to start the kids off in woody boating. 

Below is a photo from Lew Redwoods FB page that is titled ‘Yacht Racing, Auckland Harbour, NZ – any of the woody yachties able to advise the class of boat & which part of the harbour?

IMG_1129

Kawau Island Boats & Baches

P1030272

Kawau Island Boats & Baches

Recently I had had enough of weekends in Auckland so with the wife out of town, I took the opportunity to escape & experience the 2nd to last stage that some of us go thru e.g. yacht > launch> motorhome > death.

An old neighbour & friend Chris Miller, owns a large motorhome, so we headed north to Sandspit – & booked into the camping ground for the weekend.

On Saturday we took the ferry to Kawau Island for what is known as the ‘Royal Mail Run’ – the boat mooches around the island dropping off / picking up passengers & freight for all the private jetties. While not a woody, the ferry trip is a must do, you get to visit most of the bays & can even enjoy a wine or two.

The photos above are a random gallery of the woodys I spotted on the trip & some of the waterfront holiday homes.

 

Classic Woody  Riverhead Hotel Cruise

P1020340

Nana

P1020354

_1020386

Mahanui

_1020370

 

_1020387

Volantis

_1020405

Unknown

_1020409

Korara

_1020431

 

_1020420

Classic Woody  Riverhead Hotel Cruise

Not wanting to sound like a parrot but the CYA has an amazing track record of aceing the weather for its launch cruises to the waterfront Riverhead Hotel. 

The forecast was average, but it just never eventuated & subsequently the boats that made the trip had a great day.  

So cool to have one of our yachties make the trip, that center-board helped 😉

Highlight of the day for me was seeing John Wright’s recently restored launch – Nana. Nana was designed by C. Bailey Jun. &  built by C. Bailey & Sons in 1934. You can view more on Nana’s amazing journey, from rescue to re-launch at this link https://waitematawoodys.com/2017/02/01/nana-resuced-restored/ 

John has one of the best eyes for how a woody should look, the final details on Nana make her look perfect, in my eyes. John, you should have finished the trip & come up to the hotel, I have a WW tee-shirt for you – email me your postal address – waitematawoodys@gmail.com

 Also had a peek at the publican’s – Paula & Stephen Pepperell’s 1967 Jorgensen launch -Volantis, that is nearing the end of an extensive re-fit, Stephan is another woody with a great eye for detail.

Below are a collection of photos from the camera of Simon Smith who was perched on the Greenhithe Bridge – they give us another perspective on some of our classics. Pity Simon wasn’t there for the return trip – Raindance & the motor-sailer Korara, were just passing under the bridge, being good woodys, traveling to starboard of a large plastic yacht (a Hanse) that was approaching the bridge – when all of a sudden the yachts bow shot up out of the water & the yacht shot backwards. The reason – you guessed it – mast hit the bridge (photo of dent to the bridge, below) luckily they were travelling slow, any faster & they might have lost the mast. I suspect there was a change of undies needed for the crew.

bty

Raindance & Nana

bty

Lucinda

bty

Lucille

bty

Mahanui

bty

Arohanui

bty

Korara

Upper Harbour ‘V’s’ Yacht Oops

_1020434

HDML – Kuparu – P3563 Looking Rather Smart

_1020439

Kupara

_1020441

_1020440

 

SS Kotare

Unknown

Unknown-1

 

Unknown-4

Unknown-5

SS KOTARE

Today’s photos of the steam boat Kotare come to us from John Wicks. I’ll let John tell the story.

“On my way back from our “walkies”, approaching the launching ramp (Hobsonville-nee-Westpark Marina), the dog’s ears pricked up, then I heard some hissing and farting. As the ramp came into view, I could see steam and smoke rising, and Lo! and behold – the little steam launch Kotare which been launched from her trailer.

By the time I got down onto the pontoon, she was full steam ahead and straining at her mooring ropes, smoke and steam everywhere. Glorious!

Her crew was fairly busy fiddling with valves, levers and suchlike, but I did learn that she was preparing for a steam meet at Greenhithe this Saturday, and a few other details;

  • She’s a woody, quite new, strip planked and glassed.
  • Her owner/skipper (that’s him inboard working on “stuff”) built the whole thing, boat, engine et al.
  • The engine is a 2-cylinder double-expansion one, plus she has an auxiliary electric motor tucked away aft.
  • Just now they’re using diesel to heat the boiler, but they’re turning vegetarian in the near future.

The other bloke in the grey shirt is part of the outfit, though I’m not sure just what part. The couple on the pontoon, I’m in the dark shirt and white cap, her in the orange T-shirt, just turned up purely by chance – in the neighborhood, came down to have a look at the marina. They’re from the West Coast and – would you believe – they have a small steamer on Lake Brunner! Spooky, possums!

Having been warned many years ago that steam is almost instantly addictive, I walked away before harm came to me, and took the broadside shot from behind the safety of a metal fence.”

Russell Ward Input – Famous wooden boat exponent Pete Culler said “Stay away from steam, it’s very addictive -one sniff and you’re hooked.” He was an oars and sail man though and he’s right.
The Auckland Steam Engine Society is meeting at Rame Road reserve Greenhithe Saturday 24 March 2018. High tide 1.30 or so. Fill yer lungs and feast yer ears and eyes.

EVENT UPDATE

Regrettably the steam event Saturday 24 March has been cancelled because of the adverse weather. We’ve never had a steamer melt in the rain and our fearless leader Alan will agree that damp days are often the best!

One of the best boating days ever 🙂 Alan

Input from Daniel Hicks – 

The boat was built by Paul Eaton, and is based on a Simpson Strickland launch of around 1900. Selway Fisher in the UK drew the plans, and it is listed in their catalogue as the 23′ Golden Bay design. Paul started by building the engine, a John York designed compound (3 + 5.25 * 3.75) from a castings kit from Elliott Bay Steam Launch Co in the US. Paul then built the hull and had a boiler designed (based on a steam car boiler) and the pressure vessel professionally made. The whole lot has come together over 17 years!

Kotare has a number of interesting features, as mentioned she is both a steam and electric vessel, being able to be propelled by either form of power, or propelled by steam with the electric motor charging the batteries. Another unusual innovation is the fact she is fitted with a Rice type propeller nozzle!

Yes Kotare is complicated, but Paul wanted to try lots of things out, and have lots of back up systems in place. The machinery may appear to take up a lot of the boat, but it always does in a steamboat, and Kotare is better than some, she just appears worse because of the location of the electric drive system directly behind the steam engine.

Wednesday was launch day, and I was there as I’d offered to help and provided the tow vehicle, my only claims to fame on this one. She floated very close to her marks, she steamed well and goes fairly well, despite a number of snagging issues being apparent. A pretty successful first day out, and superb effort from someone who hasn’t built a boat or a steam engine before!

Update 27-03-2018 photo ex Alan Good

Unknown-1

 

C’est Ia Vie

Unknown

Unknown-1

C’est Ia Vie*

The above clinker runabout is owned by Stuart Donaldson, who is keen to learn more about her past. Stuart has been told that it was designed and possibly built by John Spencer in the late 1960’s /early 1970’s.

Thanks to woody Baden Pascoe who spotted her at Okahu Bay boat ramp over the weekend & took the photos.

Baden commented that she appears to be a very professionally built boat.

So woodys – anyone able to supply more intel on this clinker runabout?

(*French translation = That’s Life)

Update 09-05-2018 ex John Wicks – after spending most of her life on the lakes, C’est La Vie has really got a a taste for salt. This time at West Harbour.

 

 

Awatea

Unknown-2

AWATEA

The above photos are ex Barbara Cooke’s & my camera. The launch Awatea is shown above at the Waikawa Bay Marina, Queen Charlotte Sound.

She appears to be a very well cared for classic. Any of the southern Woodys able to shed some light on her?

19-03-2018 Input from Steve Waring

Awatea is 11.5 meter and designed by Bruce Askew for me in 1993 .
She was built by Chris Morrison in Christchurch and launched in Lyttelton in 1995.
The hull is strip planed with Totara cabin sides , silver pine lined coach roof , kauri trim.
Power is from a Yanmar 4JH2UTBE 100 hp diesel.
She cruised comfortably at 8 knots
I cruised her round Banks Peninsula for a season then steamed her up to Havelock where we used her as a sounds commuter. She was sold in 2000 and relocated to Mana marina.

Woody Jet Boat

Screen Shot 2018-03-01 at 11.33.40 am

Screen Shot 2018-03-01 at 11.34.08 am

Screen Shot 2018-03-01 at 11.32.36 am

Screen Shot 2018-03-01 at 11.34.40 am

Screen Shot 2018-03-01 at 11.31.31 am

Woody Jet Boat

Including the words ‘jet boat’ in the story headline could be slightly off putting to some, but today’s boat just ticks so many boxes it was an automatic Monday story.

The hull design is inspired by a picture on the workshop manual for the Hamilton Jet Rainbow unit, and is typical of the period of the unit (1956).
The jet unit has been completely rebuilt, including all new gaskets and bearings, and a freshly rebuilt impellor.
The engine is a 1956 Ford 100E Prefect (which the Rainbow unit was designed for). It has been professionally re-conditioned, was re-sleeved, and has new pistons, valves, bearings, oil pump, gaskets etc. All major parts that were re-used (block, head and crank) were crack tested before being re-machined. I.e. No expensive was spared.
The engine is cooled by a modern savage heat exchanger and runs a modern sand filter.
The 12’ hull has an aluminum planning surface (to aid longevity) but is otherwise constructed mainly of recycled kahikatea, rimu, Southland beech and kauri. The sides are Fijian kauri marine ply.
The Art Deco style trailer is a work of art, it was custom built by Ted Sagar of Rivercraft Marine exclusively for this boat.

She was launched in 2007. Her owner has another project planned, shed space is required, so now is the chance for someone else to own this little beauty.

You can view / read more on the original build at the Jet Boating NZ website – link below
http://www.jbnz.co.nz/yabbse/index.php?topic=10897.0

And I want the truck – always had a soft spot for the Willys Wagons.