WOODEN CLASSICS TAKE CENTRE STAGE AT THE 2025 WHANGAREI MARITIME FESTIVAL
Early Saturday morning I pointed the car north and arrived in Whangārei just in time to catch the soft early light — perfect for photography and well before the dockside crowds arrived.
Whangārei’s Town Basin really is the ideal setting for a maritime festival — easy dock access, great viewing angles, and plenty of nearby cafés and attractions. Add in the buzz of the Saturday markets and you’ve got all the ingredients for a standout event.
Wooden boat numbers were a little down on last year, but a few visiting commercial vessels — including Customs, Pilot boats, fishing craft and a pair of Waka — helped round out the fleet. From a public point of view, it was still an impressive line-up. Given the number of classic boats that have migrated north in recent years, it would be great to see more of the region’s wooden heritage on display next time around.
It was great to catch up with so many familiar faces — clearly the new highway was busy with Aucklanders heading north for the weekend.
All up, a thoroughly enjoyable day. Hopefully today’s photo gallery will inspire a few more of you to make the trip in 2026.
And there is always a few foody pix – hands down the best two seafood fritters ever – one mussel and the star – one whitebait. And a free KOWHAI coffee because she liked my WW t-shirt.
FYI – when I’m at an event I point the camera at what catches my eye , sometimes I miss a few boats but I like to think the photos are more like someone strolling the docks rather than someone trying to capture the whole caboodle 🙂
Seems these days there is a fb page for just about anything and everything – John Burland sent me a link to the ‘Memories of Abel Tasman National Park’ page. There I came across a posting dating back to April 2023 where a Peter Campbell posted a copy of a Cody Engineering advertisement from November 1951 , featured in the ad was the 26’ launch – KAIPO. At the time owned by Henry Cotton. She had a 8’6” beam and draft of 2’6”. We ran a brief story on her back in 2023 but didnt learn about, so we try again 🙂
Then we learnt in the comments section(ex Steve Thomas 2024) thatDon Thomas and Boxer Fanslowe purchased KATIPO from Nelson Fisheries mid 1950’s and was then refurbished by Dick Stringer in Nelson.. In another comment in 2024 a Lynda Gould advised the Don Thomas was her father and him and Boxer owned the boat in the 1950”s > 1970’s.
She was originally built by the Juke yard, Wellington and launched 1929. The Petter 10hp engine was replaced around 1960 with a Ford Dexta 3 Cylinder, 32hp. KATIPO remained in the Thomas family until sold around 1998.
She’s now sitting in Picton Marina and I believe with the same Dexta engine still going strong after 63 years service. Photo below ex Steve Thomas, taken around 25 years ago.
Do we know what became of KATIPO.
03-02-2026 INPUT ex JOHN BURLAND – Now located in Picton Marina on a pole mooring. Powered by Ford Dexter diesel engine and 4sale on tme.
Yesterday in the post I received a package from Denis O’Callahan, past owner of MV TASMAN. Denis had recently been going thru his ’to good to throw out’ files and found a collection of old boating magazine from 1911, 1913,1938 and 1958 – after a quick glance I had to put them away before I wrote the whole day off 🙂
A couple of things did catch my eye –
1. The above advertisement for the Central Boating Company, promoting the Hyde Propeller and Regal engine – which CBC were agents for. I assume the motor boat in the advertisement is named REGAL as a result of its engine and that it ran a Hyde Propeller – caption reads 15.38 knots, very impressive for the size of boat. But, back then there were very little home comforts aboard, so significantly lighter. Further on in the issue we learn that REGAL did have a 32hp Regal engine and her specs were 32′ in length with a 6’10” beam, She was also for sale, no price mentioned.
Do we know what became of REGAL
2. A boats for sale listing from 1913, see below. One of my pet frustrations with boat dealers is they never show / list a boats name, in fact even go as far as removing the name from the photos if the name is visible . The vessels name is an integral part of its DNA, equal to designer / builder / specs etc.
One can only assume the boat dealer is too insecure to publish the name.
Well after reading the 1913 December issue of New Zealand Yachtsman seems the insecurity has been around 100+ years, after reading the listing I wasn’t able to put a name to any of the launch for sale descriptions. The reference to a race winner on the 3rd from top listing might make that one identifiable.
FATHERS DAY SORTED FOR ANYONE WITH SALT IN THEIR VEINS
Rarely these days do I pick up a book and can not put it down – well it happened recently. I received an advance copy of Davey Jones just published book – ‘Davey Jones of Wakatahuri’ and its both a cracker read and an amazing account of his boating life and his interaction with the Wakatahuri region. Now I’m sure some of you will be asking yourself ‘ where is that?’ – well its in the outer Pelorus Sound at the top of the South Island, the Marlborough District (refer chart below). The area has been many things to many people – a fish factory, a boatyard, a ship breaking base and a community hub.
Davey Jones arrived at Wakatahuri as a young fisherman in 1956 and still lives there today , on and off when he’s not lapping NZ in his boat.
It’s an additive read that with the help of over 200 photographs will have you hooked.
And as a bonus – included is a reprint of an equally wonderful read -’Sounds Wrecking Co.’ by Martin Burthold.
So woodys drop a hint to the family re what you want for Fathers Day (Sept 7th) or just order one for yourself – $60+ p&p – all enquiries to daveyjonesofwakatahuri@gmail.com
AND I HAVE A COPY TO GIVE AWAY – just answer correctly the name of the vessel Davey Jones has most recently been lapping NZ on. Enter ONLY via email to waitematawoodys@gmail.com all correct entries go in the draw. Closes 6pm 17-08-2023.
AND THERE ALWAYS HAS TO BE A BOAT PHOTO – this is from Davey’s book and shows the work boat MARLBOROUGH PN47, in Picton Harbour c.1929, built by E R Lane. In the background are VALMARIE, at left, and Ernie Lane’s boat shed, the Picton Rowing Club sheds at right. The vessel under repair at Lane’s yard is a lighter from Port Robinson (Gore Bay)
I’m a big fan of the Picton Clinker & Classic Boat Club, they seem to have the mix right when it comes the wooden boating community. Recently I was chatting to Roy Jones (Roysie) who among other things pulls together the clubs newsletter. Roysie mentioned a project he had been working on and promised a story – and today woodys we get the enjoy that story – I’ll hand over to Roysie to tell it.
“Fifteen years ago The Picton Clinker & Classic Boat Club was gifted a 14ft clinker hulk which came with a remarkable provenance. Built by Ernie Lane in 1920 for Mr John Brownlee, son of the timber tycoon, William Brownlee of Havelock, the boat was in a sorry state and owned by Club Member, Noel Johnson.
Noel’s initial attraction towards Ruru was that, when he lived in Havelock as a child in the mid 40’s, he can vividly remember Ruru resting in the creek near the present causeway, whilst owned by the Havelock butcher, Mr Johnny Buncombe. Playing in Ruru, he would often be chased off and Noel miraculously relocated the boat again in 2003 on the Holdaway farm near Blenheim.
The Holdaway’s had purchased Ruru in 1948, from Johnny Buncombe for 100 Pounds, and who himself, had bought her from the Brownlee’s in 1933.
Now in a very sorry state, Barry Holdaway gave the hulk to Noel who intended to restore her. Aged 80, he realised it was beyond him, and Noel wisely gifted the craft to the Picton Clinker & Classic Boat Club in an effort to preserve her, and it worked.
Ruru as restored in Jan 2010
Ruru is the Club’s flagship and is utilised on all the club runs as such. Roy had a little to do with the restoration and always admired her lines as created by Ernie, she was now available for all to view and admire. So last Christmas he borrowed Ruru for a week and after setting her up, took her lines off and drew them up on the computer. From these he created a table of offsets and after lofting out, began construction early in the New Year.
Ernie created a built-down style of deadwood almost a bustle, presumably to ensure the engine could be low as possible and with a fairly level prop-shaft, but this was difficult to recreate.
He must have steamed the kauri planks tightly to achieve the curvature around the stern deadwood rebate. Roy elected to use Meranti 9 mm marine ply rather than timber purely due to supply constraints. While gluing the lands removed the need for nailed and roved laps, it still required steamed American Oak ribs. This was the only job Roy required assistance with and co-opted a couple of retired members in the club to assist with the morning’s task. Peter Baker & Keith Henson willingly helped out and this is the norm amongst the Clinker Club members, advice and assistance is most often always freely available.
Propulsion System We originally installed a Stuart Turner P66 twin cyl. 10 hp engine in Ruru, but this was overpowered, so we swapped it for a P55 5 hp which proved more appropriate, however, the Stuart Turner became problematic for the numerous skippers in the Club. We have since settled upon a Lifan Chinese 6 hp and this has run well for 10 years, but is quite noisy. Roy considered this and, after speaking with new member, Tim Barton about his neat little electric 12ft’r, Billy O Tea, decided to also install an electric system in the Ruru clone.
With Tim’s advice on where to go for the Chinese supplier, Roy ordered a 4kw, 1000 rpm 48v dc motor and controller, which duly arrived about 4 weeks later without problem. At around $3,500 landed, he considered it reasonably economical.
Subsequent to that major decision, he continued construction, framing the deck and glassing same. Unlike Ruru, he made the top strake varnished with a sub belting along the bottom edge in a more traditional style. Lacking more traditional hardwoods for the beltings, standard Quila timber decking was utilised and machined to suit; merely because it is readily available and reasonably economical.
The dc motor is considerable, weighs about 30kg developing 39 N.M.
The universal is a CV joint from a wreckers, and the thrust bearing just aft. The motor output shaft is 35mm!
Having decided upon electric propulsion, Roy decided to throw the cat another goldfish and fitted hydraulic steering to enable comfortable curved seating in the stern without a the tiller interfering with guests seated there.
Once again, Roy went online and researched hydraulic steering systems. Having been quoted over $2000 locally, it cost less than $500 for a full set imported and landed at the door in 3 weeks.
The short S.S. rudder tiller penetrates the transom quite unobtrusively, to the ram below deck and can be disconnected from the rudder when removing for trailing.
The Electric system enabled a centre console with motor and battery installed beneath, leaving a huge area amidships, where an engine is usually placed. A forward curved seat fits neatly behind the curved foredeck coamings. The large 48v lithium battery required is situated under the front seat of the console, while the motor and drive train is beneath the foot level lid below the helm.
The 48v 100 amp hr lithium battery is the blue item & takes up the full width of the compartment. The silver item is the motor speed controller that came with the motor. The yellow lead is for connecting to the 48v HD charger.
Roy purchased the 48v 100 amp hour Lithium Ion Battery from Auckland along with the new trailer, driving up and back being cheaper than freighting both down to Marlborough.
He also installed a GPS Plotter & Sounder plus a Victron battery management system from Burnsco. This is a magic device providing a shunt in the neutral supply and thus determines the present battery voltage, the currently used amps & watts, plus provides a range in hours and minutes left in the battery. It is supplied with a 50mm gauge but the best method of readout is by Bluetooth to a cell phone enabling all the readings on one screen.
The greatest dilemma with electric boat propulsion systems is range anxiety, knowing how long you can actually cruise for, at the present power usage. Well, the Victron system diminishes this to a normal fuel level concern, if you run at full power then your fuel range will be minimal, but with sensible throttle use many hours are available. Roy intends to calibrate the range from GPS speed, Shaft rpm & amps drawn. These are shown further on.
Tim provided his figures, and for example at 3.3 knots Billy O Tea draws 5.2 amps, at 5 kts she draws 22 amps but at 5.4 kts, draws 50 amps indicating her best hull speed is just below 5 kts. i.e. 100 amp hour battery at 22 amps = 5 hrs motoring, and you can always slow down!
We used GPS speeds & digital tacho rpm figures with the Victron gauge providing the current drawn. Roy will do similar with Toroa EV, (her new name now she is completed.) Toroa means Salvins Mollymauk (and the EV is electric vessel!).
Ruru like most clinker hulls is a very seaworthy craft and it is on record that when Ernie Lane completed her, she was motored around from Picton to Havelock by a Mr Doug Pickering. This is a daunting trip for a 14ft Clinker, even today, and he is reported to have had fuel trouble near Cape Jackson, Doug simply tied Ruru to some kelp while he cleaned out the fuel line of shavings! Ruru was fitted with a Scottish Kelvin of about 5 hp from new and to have motored the 60 odd miles around the Cape was an impressive feat 105 years ago!
When one considers that she was built shortly after the First World War, it is remarkable that it was obviously intended she would have an engine from new. It wasn’t a retrofitted engine installation as is usually the case with this vintage. Perhaps this would indicate the wealth of the original purchaser, Mr John Brownlee?
With the helmsman and passenger sitting in the stern sheets. Toroa EV rides high in the bow but with passenger forward she sits nicely to the waterline.
Roy advised that Toroa EV took 5 months to construct at old farts pace… i.e. 5 hr per day knocking off at rum o’clock. He takes great delight in creating clinker craft, believing if the boat is pretty, it will become a 100 year boat. (only pretty boats last 100 years because their owners love them!)
The Picton Clinker Club members own many small clinker & classic style boats and are committed to salvaging and restoring these wonderful small craft, often saving them from various scrap heaps or bonfires.
Toroa EVPerformance
Revs Speed Amps
350 2.1kts 2.4
450 2.6kts 3.5
650 3.4kts 6.6
800 4.1kts 11.7
970 5.3 kts 16
1070 5.4 kts 21
1250 5.9 kts 39
As you can see, any attempt to exceed 5 knots hull speed causes the amps load to dramatically increase, up to about 4.5kt is very economical indeed but a little more and range diminishes dramatically. Exactly the same of a combustion engine I guess.”
The seven part series is viewable by the individual links below. The series was collated by Ken Ricketts and edited by Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys are encouraged to contribute via the WW comments section. ENJOY
AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Seven Todays WW story follows on from earlier stories – link below to Part One, Two, Three, Four, Five and Six As per pervious stories in the series the content has been pulled together by Ken Ricketts and ‘polished’ byPatrica and Ken’s daughter Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back in commenting.
THETIS with her twin Graymarine 4 stroke 6cyl diesel engines
These are a very rare model of the Graymarine range, that was originally produced in WWII for the US military. All Graymarine diesel engines for general and normal marine use worldwide, including NZ, are based on the GM Detroit two-stroke engine, marinized by Graymarine. I believe the THETIS engines were the only two that ever came to NZ and were specially imported by Jack Butland for his 1955 Lane Motorboat built launch, THETIS. Here is a copy of previous comments I made regarding these engines, on Woodys.
“Ken Ricketts reports that having recently spoken with Thetis’s owner that the 2 in line, 6 cyl, 4-cycle, 120hp Gray Marine engines, installed in 1960 (still there today) are a very rare model & type. They were manufactured during WWII for the American forces & could possibly be the only 2 in NZ. The owner believes her original owner Jack Butland in the later 1950’s probably reconditioned, & war surplus imported them.”
BELOW IS A REPRINT OF THE HERCULES SETION IN PART 2 WITH ADDED TEXT I HAVE TAKEN THE LIBERTY OF REPRINTING IN THE CIRCS.
HERCULES 6 CYL c100HP DIESEL ENGINE AS FITTED TO THE FAYE
HERCULES 275 HP DIESEL ENGINE, SIMIALAR TO THAT PREVIOUSLY IN THE RAKANOA
FAYE WITH HER 6 CYL HERCULES HOME MARINISED DIESEL ENGIINE
RAKANOA WITH HER 275 HP 6 CYL. MARINE/HOME MARINISED DIESEL ENGINE
Hercules was a manufacturer and supplier of a large number of basic engines to many marine engine companies for marinization by each company to its own specifications. This included names such as Kermath, Chrysler, Graymarine, Scripps, Chris Craft, and many more. However, engines sold under the Hercules name, based on my research, are comparatively very small compared to their total manufactured units.
There are two boats I know of in New Zealand that have engines both labelled under the Hercules name and are diesel engines. One is the FAYE, which is equipped with a home-marinized C100P 6-cylinder Hercules diesel engine. This engine replaced her original Willys Jeep petrol engine when she was about 4 or 5 years old. FAYE’s details are noted in her Willys Jeep listing in part 2 of this post.
The other is the beautiful 56-foot RAKANOA, built in 1946–47, which had a 6-cylinder 250HP Hercules diesel fitted after she had been in the water for one year. This engine replaced her original GM Detroit 165HP 6-71 diesel.
Her original owner, Stan Parker, was a brilliant engineer and owned a very large precision engineering business.
I am not sure if the Hercules engine was factory or home-marinized, as he would certainly have had the ability and equipment to do this. Stan, the original owner of RAKANOA, owned a large heavy engineering factory in Auckland. This business passed to Ross when his father passed away in 1961. RAKANOA retained this engine until 1981. Ross told me, after he inherited her many years ago, that they had always had trouble starting the Hercules engine, especially when hot. Many years after he inherited her, he eventually replaced the Hercules with a Gardner 6L3 diesel engine, which she still has to this day.
The Hercules engine was fitted because original owner Stan P., could not tolerate the very loud high pitched geartrain noise of the Rootes blower, combined with a loudish exhaust noise, she had with the G.M. Detroit
Unfortunately, I have not been able to find on research to date, any images of the 250 HP marinised version of the Hercules engine, however I have found what may be an unmarinised version, of RAKANOA’s engine.
RUSTON HORSNBY DIESEL ENGINES.
HAIMONA ex MANGA, WITH HER ORIGINAL TWIN 6 cyl, FODEN DIESEL ENGINES
RUSTON HORNSBY TWIN CYLINDER MARINE DIESEL ENGINE AS USED IN THE MANOWAI
HMNZS MANGA AS ORIGINAL.
HAIMONA IN HER PLEASSURE CRAFT GARB WITH HER 2 RUSTON HORNSBY DIESEL 200HP ENGINES, ON THE KAIPARA HARBOUR
MANOWAI IN HER RUSTON HORNSBY DIESEL ERA, AT HERALD ISLAND
There are only two of these I know of in New Zealand in pleasure boats. One was in the 32 ft MANOWAI, during the second part of Claude Atherton’s era, from 1949 until at least the 1960s; it was a twin-cylinder version of the engines.
The other boat was HAIMONA, formerly HDML MANGA, which was based in the Kaipara Harbour. Eventually, after a few years there, the only slip she was able to use for maintenance became unavailable, and she deteriorated badly before being destroyed by her last owners.
When they bought her, a massive coaming structure was added, and they also replaced her original Foden engines with twin 200 HP 6-cylinder Ruston Hornsby diesels, which they removed prior to dismantling her.
FORD FALCON 4.1 LTRE 6 CYL. PETROL ENGINES
FORD FALCON 4.1 LTRE 6 CYL. PETROL MARINE ENGINE
VALSAN CHRISTMAS 1948 IN HER PRE-FORD-FALCON, PETROL ENGINE ERA
The 1938 Roy Lidgard-built VALSAN was bought by Arnold Baldwin around 1947, complete with her original engines, which were 2 x 100 hp flathead Graymarine petrol engines. He owned her for many years, and the time eventually came, after many of those years, when they had to be replaced, around 1970.
I was amazed that he chose 2 x Ford Falcon 4.1 L petrol engines as replacements, as these were engines usually associated with small day boats or runabouts, often equipped with stern drives or jet units. There were a total number of such engines unknown to me, and she is still the only launch I have ever heard of with these engines.
Things have, of course, moved on since then, and the last I heard, she had 2 x 4-cylinder Mitsubishi diesel engines post 2000.
CHRYSLER-MITSUBISHI CN-55TI 200HP 6CYL. IN LINE MARINE DIESEL ENGINES
THE CHRYSLER-MITSUBISHI CN-55TI 6 CYL. DIESEL ENGINES PRODUCING 200hp @ 3150 RPM INSTALLED IN ALIBI
ALIBI’s 2 “STERN POWER” STERN DRIVE UNITS, & NOTE BOTH ENGINES EXHAUST OUT THE SAME SIDE AT THE TUCK
As readers of this series may recall, ALIBI made a cameo appearance in part 2 when I was seeking information related to her sistership, which I now know is or was called CRESCENDO, seen below on launching day, as I have seen the two V8 Chrysler-branded diesels CRESCENDO had when new.
Thanks to the input of others, I have now also discovered that these engines were manufactured by another company, and simply sold under the Chrysler label, which seems to me to be a continuation of Tony Mason’s apparent tendency to use engines with the Chrysler label, as in ALIBI.
However, since the previous cameo appearance of ALIBI, I now have full details of her engines, thanks to a lady named Juliet Hindman, who is very knowledgeable about the Mason Clipper range of boats.
Her family has owned one of the two only 33-foot versions of the Mason Clipper, and she has now contacted me.
As a result, and with the information she has provided, ALIBI now definitely falls into the “Unique” class of engines category, as specified above, as far as I’m concerned, and she now has her place in the group in her own right.
ALIBI’S two CHRYSLER-MITSUBISHI CN-55TI DIESEL ENGINES, producing 200 HP at 3150 RPM, are driven through Warner gearboxes to “Stern Power” make, cream-painted counter-rotating outdrives. While the engines and gearboxes are both left-handed with a 1-to-1 ratio, outward turning counter-rotation of the propellers has been achieved by the gearing system in the stern drive units, which are also acting as reduction gears with a 1.5-to-1 ratio, driving Volvo 16 x 17-inch propellers.
I feel the engine-to-stern-drive setup with these engines, is superior to many others, in that the engines are obviously primarily produced for conventional drives, having the gearboxes attached to and as part of the engines, but can still be used either way, for stern drive units, or conventional drives, with the stern drives simply providing the drive to the propellers.
Many manufacturers combine the gearbox and stern drive into one unit, which makes them much more complex and quite possibly much more expensive to maintain.
Additionally, the combination drive/gearbox units are often very “clunky” and jerky when selecting forward or reverse, whereas there would not be this clunk with the smoothness of hydraulic engine-attached gearboxes.
I have spent a great deal of time, trying to source a good clear image of these engines, but they seem to have disappeared from historical public databases, and the only image I have been able to source, is of ALIBI’S own engines installed in her.
It is, however, wonderful that she still has these original engines after all these years since she was built in the later 1970s. A great testimony to Mitsubishi. Here are her details as received from Juliet H.:
“Released in 1979, the Clipper 42 was 12.8m x 3.7m with a draft of 900mm and, fully laden, displaced around 9 tonnes. Alibi was the prototype, built with a sandwich construction of strip-planked cedar, fiberglass on both sides. A mould was taken off the prototype so that all future boats could be full GRP with a balsa core. However, Crescendo was the only boat ever pulled from the mould.”
I would recommend that readers revisit ALIBI’S cameo appearance in part 2 of the series to see some wonderful images of her exquisite finishing and interior.
A final note re CRESCENDO. – She has been seen reasonably recently, in the South Island, I have been told, so any further help with information about her in any way, would be much appreciated.
LISTER MARINE DIESEL ENGINES
I had considered including LISTER MARINE DIESEL ENGINES in the group, however, there are quite a good number of these engines that are or have been in use in NZ., in many work boats, fishing boats, tugs, & a few pleasure craft, & in the end I decided they fell just outside the scope of what I was about, so will just make a general mention of them, with a few images of the odd pleasure craft, all of which had these engines installed by Roy L.
Roy Lidgard used quite a number of them in various types of craft, the 1940s & 1950s, mostly 4 cylinder, & also had a 4cyl version of the Lister Diesel driving the Smeltinghouse Bay Kawau island sawmill, he set up & ran on his property, in the later 1940s & 50s, the remains of which are still there today.
As just a brief mention, he installed Lister diesels, in the ROSE, (2 CYL) (later LA ROSA) Clive Power’s WAINUNU, (4 CYL) & TAWHIRI, a lovely sedan topper R Lidgard built in the mid/later 1940s (4 cyl)
THE ROSE (NOW LA ROSA)
TAWHIRI BUILT BY R LIDGARD 1940s WITH 4 CYL LISTER MARINE DIESEL AS ORIGINAL
WAINUNU WITH CLIVE POWER AT THE HELM, WITH HER 4 CYL LISTER DIESEL, WITH THE EXHAUST OUT THE TOP OF THE MAST. c1940s
Screenshot
ROY LIDGARD’S SAWMILL, SMELTINGHOUSE, BAY KAWAU ISLAND c. LATER1940s
LISTER 1940s 3 CYL MARINE DIESEL ENGNE AS AN EXAMPLE OF THAT ERA
EPILOG:
Well, readers, we have come to the end of this seven-part journey, and I can only say that for me, it has been a wonderful ride, to share with all of you who have taken the time to share the ride with me, and to follow the seven parts of what I’ve learned throughout my lifetime.
So often, you know as much, if not more, than I do. While some may have learned a little from me, I have, in turn, learned much from many of you, as we have shared this journey together, & I thank you all, for the opportunity to gain this new knowledge from you.
I especially want to express my humility and gratitude, for the kind words of thanks and appreciation, in some of your comments directed towards me personally.
I have done this most of all, to encourage us all, to share and record publicly, what we know about our New Zealand-based boats, with each other, and most importantly, to provide a public record, for the benefit of the boaties of the future. Those who will come after we old wrinklies have all gone, & will become the stewards of tomorrow. As a result of what we all write now, they will hopefully have the chance to understand what has gone before in all or many aspects of what will become their boats, the majority of which will surely live on long after we are not here.
Back in Feb 2020 one of the WW spies spotted the launch – AVALON ‘parked’ on a lawn in Auckland’s north shore. From the subsequent WW story , linked below, we learnt that the 24’ AVALON was built be Sam Ford and launched in 1954 . AVALON has enjoyed one extended family ownership since new and at the time Tobias Forsyth (MV Callisto) was planning to give the launch a birthday. The top photo (launch day) above was sent in by Cameron Pollard Feb 2020https://waitematawoodys.com/2020/02/17/mystery-sam-ford-launch/
Fast forward to Nov 2021 and Tobias gave us an update, link below, which included a wonderful collection of historical AVALON photos over the years. He also shared a design sketch of the thinking re the ’new’ look (4th photo above). Nov 2021https://waitematawoodys.com/2021/11/29/resurrection-of-avalon/
Then last Friday the gallery of work-in-progress photos above landed in the WW inbox. The Forsyth family, including father Ian (MV MEOLA) are very talented chaps as you will see from the work underway. Tobias commented that it had “been a busy few weeks with some big milestones but plenty of work has gone on since she was installed outside my kitchen window. Getting onto the shiny bits new with new solid Honduran mahogany cabin sides with a slight more sleek take on Avalons original design, engine is in and things are progressing well. Hopefully she can be in the water for summer 2026 in a rough and ready mode.”
As always – click on photos to enlarge 😉
UPDATE ex TOBIAS FORSYTH – AVALON will be re-powered new Mercruiser 3.0 petrol engine with new hydraulic transmission.
The old engine (Morris Naviigator) was too far gone and finding parts made it uneconomical. Its still sitting in my garage if someone looking for parts as there’s all sorts there and spares too including the Paragon box with 2:1 reduction. Would make a good static museum piece as it’s quite neat with the hand crank start etc. it seems too good to take to the scrap dealers.
The new engine is half the weight, 8 x more HP , narrower and shorter, so gives me much more internal room. And it should be nice and quiet inside the cabin when running. Plus she may boogie a little faster now.
I intend to tow her around the country and visit a lot of the lakes and hard to reach spots right down south in the future so she will be a full trailer boat now. Plus the anniversary races etc.
Tobias also commented that he is the second owner of Avalon, his grandparents had her hull and cabin sides built by Sam Ford in early 50’s and grandfather transported her home on the truck and finished her outside their kitchen window over a period of about 6 months with what ever he could find that would do the job, tounge and groove and canvas cabin tops. They then kept her at their wharf in Helliers Creek that Avalon help build as she towed the logs to Riverhead to be pressure treated and milled before towing/carrying them back rather overloaded at times. Tobias’s Grandma used her regularly well into her 80’s before she ended up on the lawn . Tobias’s mum Carol is the baby in Granddads arms on launching day.
AVALON is a genuine one family owned vessel since new.
AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Six Todays WW story follows on from earlier stories – link below to Part One, Two, Three, Four and Five As per pervious stories in the series the content has been pulled together by Ken Ricketts and ‘polished’ byPatrica and Ken’s daughter Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back in commenting.
BENZ DIESEL ENGINE – BENZ OM59 55HP 4CYL DIESEL ENGINE PROBABLY SIMILAR TO THAT IN THE MANUNUI
MANUNUI WITH HER 55HP 6 CYL BENZ DIESEL ENGINE DURING WWII
MANUNUI AS BUILT AT SPEED WITH HER BENZ DIESEL ENGINE
The MANUNUI was built for Percy Colebrook in 1939 by Bill Couldrey and had a medium / slow revving 6 cylinder 55 hp Benz Diesel engine fitted when built, which she retained until 1963 when it was replaced by a 100 hp Perkins Diesel.
CRUSADER V8 MARINE PETROL ENGINES
TWIN CRUSADER ORIGINAL V8 PETROL ENGINES HAVING SERVICING, FROM THE RIVA TRITONE “LOLA,” WHICH ARE STILL IN HER TODAY.
Crusader engines, while major marine engine suppliers in America and other countries, have only made a cameo appearance in New Zealand, with only a handful of these lovely engines in use here, as far as I can ascertain.
Overview: The only craft I personally know of for certain is the stunning 1962 Italian-built Riva Tritone, LOLA.
However, WINSOME II may have had one, back around the 1950s when owned by Andy Donovan. I know her previous Chrysler 8-cylinder inline engine was replaced around that time by a V8, that was either a Crusader, Chris-Craft, or Flagship. However, the memory banks have failed me, making it impossible to determine which of the three it is, so come on, you WINSOME II experts, help me out here!
In the 1960s, Crusader Marine Engines was a prominent brand worldwide, providing inboard power for many boats, particularly cruisers and sport fishermen. They were known for their premium quality and reliability, used by leading boat manufacturers like Chris-Craft.
Crusader engines were based on standard automotive engines, but were marinized for marine use, with many of them based on Ford engines, and later with Hercules and Chrysler base units.
LOLA WITH HER 2 X CRUSADER 270HP PETROL ENGINES
LOLA, the 1962 Italian-built Riva Tritone Aperto, has a LOA of 27 ft and is one of only 15 in the world.
It is believed to be the only original Riva in New Zealand and a stunning example of boat restoration, all completed in NZ. Only 3,000 Rivas were built between 1950 and 1966, and she still has her original engines. She lives, or did live, in her own, purpose built, fully air conditioned boat shed, on the banks of the Marlborough Sounds.
WINSOME II – MAY HAVE HAD A CRUSADER V8 PETROL ENGINE IN THE 1950s /60s ERA – POSSIBLE ALTERNATIVES ARE FLAGSHIP & CHRIS CRAFT
CHRIS CRAFT PETROL ENGINES.
CHRIS CRAFT 1950s 6 CYL FLATHEAD PETROL 135hp ENGINE SIMILAR TO THAT IN THE GLENIFFER IN THE 1950s
These are another brand of engine that is sold in huge numbers worldwide, particularly in America, where all genuine Chris-Craft boats are built. However, they have only made a cameo appearance in New Zealand, with most of them coming here in imported Chris-Craft boats.
There are a few New Zealand-built boats that have or have had them. I have only ever seen a petrol version, although naturally, they do produce diesel engines in their lineup. All the engines they produce are based on other major engine manufacturers’ base engine blocks and are marinized by them. Hercules is a major engine block supplier to them.
GLENIFFER WITH HER CHRISCRAFT 6 CYL FLAT HEAD PETROL ENGINE RUNNING ON KEROSENE IN THE 1950s – OWNER PERCY JENNINGS IS AT THE HELM.
Input copied from previous post, ex Harold Kidd. – “Trevor Davis sold GLENIFER to P J Jennings of Paeroa in 1937 and he sold her to George Manktelow of Paeroa in about 1959. The Gleniffer was replaced by a 6-cyl Chris Craft (Hercules block) during the 50s, converted to run on power kerosene with a Model A Ford Zenith carb.”
FLAGSHIP MARINE ENGINES
FLAGSHIP 1958 250HP V8 PETROL MARINE ENGINE – BASED ON A CHEV BLOCK
There were a number of these engines that found their way to NZ in the 1950s/60s era and this is one of the possibilities for the V8 engine that was installed in the WINSOME II in that era by Andy Donovan who may also have had an agency for them, around that time.
AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Five Todays WW story follows on from earlier stories – link below to Part One, Two, Three and Four As per pervious stories in the series the content has been pulled together by Ken Ricketts and ‘polished’ by Patrica and Ken’s daughter Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back in commenting.
LINDA, AT CHRISTMAS 1948, TAKEN IN SCHOOLHOUSE BAY, KAWAU ISLAND, JUST AFTER HER LOEW-KNIGHT PETROL ENGINE HAD BEEN REPLACED, WITH HER GM DETROIT 165HP MARINE DIESEL.
COQUETTE, POST HER LOEW KNIGHT-ERA
I know of only two boats that have these very rare versions of the Knight sleeve valve engine. One is the 1928 Colin Wild-built LINDA, which was bought by Roy Swales just after WWII with her original Loew-Knight 6-cylinder petrol engine. I saw it running, and it was incredibly smooth, quiet, and looked very tiny in LINDA’s huge engine room. It was painted silver and had the name “Loew-Knight” in a scroll, cast into the inspection plates on the crankcase.
Roy W. replaced it in 1947 with a 6/71 GM Detroit 165 HP diesel engine.
The other boat was the delightful Logan-designed and built COQUETTE, with her sedan top, which was added many years later by Arnold Couldry. He kept her delightful lines perfectly with this addition. She had a 4-cylinder version of the Loew-Knight sleeve valve engine, also painted silver. I tend to think this may have been her second engine because of her age, having been built in the early 1990s.
FODEN 2 CYCLE DIESEL ENGINES.
FODEN 12 CYLINDER 2 STROKE, MARINE DIESEL 256HP ENGINE – 2 X 6 CYL ENGINES SIDE BY SIDE ON ONE CRANKCASE IN 1 ENGINE
FODEN 6 CYL 2 STROKE DIESEL ENGINE
FODEN 6 CYL 163HP, MARINE DIESEL ENGINE
ORIGINAL FODEN ENGINES IN THE HDML MANGA, AS SOLD BY THE NAVY
KUPARU NOW OWNED BY SCOTT PARRY BELIEVED TO STILL HAVE 2 FODEN DIESELS
HMNZS KUPARU
HMNZS MANGA
DEODAR IN PRIVATE OWNERSHIP AFTER HER DAYS AS THE POLICE LAUNCH
LADY MARGARET WITH HER 2 X 6 CYL FODEN DIESELS – (Built by Dick Lang)
MARNINE WITH HER 2 X 6 CYL 163HP FODEN MARINE DIESELS IN MARCH 1963
WHITE CLOUD LAUNCHING DAY WITH HER 4 CYL., HOME MARINISED FODEN DIESEL
There are only three pleasure launches that I know of that have these engines, and there are two with 6-cylinder versions. The LADY MARGARET (built by DICK LANG) replaced her original two Fairbanks Morse Diesels; the MARNINE, which had two of them from when she was built, had the same specifications and was installed at the same time as the LADY MARGARET. The third boat was the WHITE CLOUD, which had a 4-cylinder home-marinized version, fitted by or for, the managing director of Fodenway Motors, Penrose. They were the New Zealand agents for Foden engines at that time and had her built and baselined a generator set to convert the 4-cylinder Foden for marine use in his new boat. This installation took place at their Gt. South Rd premises after being built at 1A Summer St, Ponsonby, by McGeady (Supreme Craft).
In addition to these boats, all RNZN-owned HDMLs and the first of the Police Launches named DEODAR, (DEODAR I), had two of them installed. All were originally 6-cylinder versions; however, but with the HDMLs., some engines were later replaced with 12-cylinder versions in some boats, which were, in effect, two 6-cylinder engines side by side in one crankcase. These had one drive shaft and two crankshafts connected by a system of gearing. At least one twin x 6-cylinder installation is believed to still be in a boat & still surviving today. It is in the massively refurbished, now privately owned KUPARU, primarily located in Whangarei.
Foden engine manufacturing and parts supply were sold to Rolls Royce in the late 1970s, and production ceased when they took over the Foden manufacturing rights.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 