When I was coming onto the Slipway at Milford the other day, this very smart launch – Kotuku had just vacated the cradle I was heading for. Kotuku is a 26’ Pelin Mascot and has just had some serious TLC (9 weeks out).
Powered by a 25hp Isuzu 2ab1, she would be very frugal on the fuel.
She wasn’t going far – she’s a river rat e.g. calls Milford Creek home.
Message For The Skippers That Did The Woody Trip Last Easter To Paeroa
Check your prop/s – seems there was a few solid items hiding in all that mud – Raindance’s prop was in need of some love from Dr. Cam at the Slipway Milford workshop. All 3 blades were similar to the one below 😦
Todays woody is the Bailey & Lowe 1915 built launch – Lapwing. Her specs are 26’ x 6’6” and in the above b/w photo she was powered by a 17-25hp Sterling engine that gave her a very impressive speed of 12 knots. Her original owner was Capt. J Davies and the photo comes to us from a supplement to The NZ Yachtsman – May 22, 1915 via Lew Redwood’s fb.
Lapwood is my marina ’neibour’ and I took the bottom photo on Sunday, sadly she very rarely leaves her berth.
Below is a link to a WW story on her from March 2013.
INPUT EX PAUL DRAKE –LAPWING was a Taupo ‘hire’ boat for a number of years from1929. She was brought to the lake from Rotorua by Englishman Donald Hunt, who had arrived in Taupo in the early 1920’s. He was a mechanic who also had dinghies for hire, and who became the agent for Johnson outboards – he supplied a Johnson Sea Horse to our grandfather in 1928, an outboard which we still have and which is still operational. Later he was also the agent for Gray Marine and supplied the engines for PIRI PONO when she was returned to Taupo with a damaged engine after WW2, when she saw service with the RNZAF at Hobsonville, Auckland. LAPWING was renamed PANDORA after an incident which left her reputation a little tarnished. With bow pushed up on a beach in typical Taupo style, a number of passengers proceeded to move towards the bow on the same side, whereupon LAPWING took a severe list and deposited said passengers overboard. Reputation being everything, LAPWING was no more, but PANDORA went on to be a popular hire boat! Donald Hunt eventually progressed to SUNBEAM (now in Tauranga as SEA BREEZE). PANDORA continued at Taupo for some years as a private boat, before disappearing from view.
Todays story has 2 parts – the first being a link to a brilliant article that appeared in the UK Classic Boat magazine on Uffa Fox, from the pen of Barry Pickthall. Pickthall reflects on the legacy of the designer, sailor and the man himself. Its a good read, I enjoyed it, I hope you do as well. Click below to read.
AUSTRALIAN WOOD BOAT FESTIVAL – BOAT FOLK VIDEO SERIES – Terra Lina
Another short video from the team at the AWBF – this time focusing on Terra Linna, the oldest surviving yacht built in Tasmania, but there is degree of ‘granddads axe to that claim 😉
Haven’t offered up a prize in a while so today is a goodie. Thanks to a Mitchell Hutchings fb post we get to share the two brilliant photos above of the St Mary’s Bay area. Mitchell commented that the photos were dated 1980 but he was not sure of the date. Neil Gillard also commented that the date was more like the 1960’s, as at that time he was serving his time at Chas Bailey’s yard and he recalls the boats (probably the ferries) being moored there then.
This how the quiz will work – each launch you correctly ID, gives you one point – get all there right and you have 3 chances in the draw. ID only 1 = 1 chance. Launch (c) will be a challenge.
THE PRIZE: A copy of the Jenni Mence’s superb tome – ‘K-Class – The Hauraki Gulf’s Iconic Racer-Cruiser’ – 360 pages of photographs, illustrations and tales from the skippers and crew that sailed these stunning classic yachts.
Recently WW was contacted by Ron Hackett regarding a project that has had an incubation period of 64 years, its good read so I’ll let Ron tell the story. But to give you a heads up Ron is looking for a custodian to take on the project.
BOUNTY – 34’ sail boat in frame.
“In 1958, a Kauri log was purchased by a young apprentice joiner, named Maurice Fleming. His dream was finally coming true! He started a notebook, and carefully recorded his purchases. The log, from Waihou valley, near Kaikohe, cost 338 pounds. It was railed from there to Whau Valley, Whangarei, and that cost 24 pounds, 10 shillings. [The mill there was Parkers, and sawing the log cost 56 pounds, six shillings and sixpence, producing 5,268 super feet of first class heart kauri.
Maurice continued to work for his father as a joiner, and set up the vessel at his home, working on it as he could. The designer of the ‘Bounty’, Ken Low, was keen to help as well. Ken was a well known boat builder in Whangarei, and with his brother Ron, owned the Low Bros Boatyard in Ewing Rd. Ken had learned his trade with Bailey & Lowe in Auckland. Ron did mainly the engineering side of the business, and another brother, Norman (known as Nip), was a tug-master in New Plymouth and Auckland.
In Te Puna Inlet, Bay of Islands, there lives a vessel built by Bailey and Lowe, in 1911, ‘Waitemata’, a 55’ pilot launch for the Waitemata Harbour. The construction of the Bounty is the same as that used in Waitemata, so it’s clear that Ken designed the ‘Bounty’ to be built with the same methods he had learned at Bailey and Low – three skins on stringers, two diagonals and one fore and aft, plus a sawn bilge shelf. Ken was well known for designing well-balanced, sea-kindly boats. People who knew him had great respect for his skills in designing and building, and many considered him to be one of the best wooden boat builders this country has seen. Ken also designed the sail plan for the ‘Bounty’, as a fractional rig. He knew what would suit ‘Bounty’ best, and it has been said that the sail plan was ahead of it’s time. Ken was a perfectionist. Maurice was working under Ken’s guidance, who helped when he could. Maurice’s standards were also very high, anyone building their dream boat will understand! He wasn’t happy with the first pouring of the keel, and set about doing it a second time, and it came out perfect. The keel is about four and a half Ton. The backbone and floors are all fastened with bronze bolts, floors being 2” thick. There are two bulkheads, and a number of moulds, with the stringers let into the bulkheads, all being perfectly fair. Breast hook and quarter knees are grown pohutakawa, and the beams are fitted.
Unfortunately, Maurice had a major setback of a personal nature. He seemed to go into a depression which he never really recovered from. He hung up his tools, and all work on the ‘Bounty’ stopped. Eventually, when Maurice was ‘getting on’ and was in a retirement home, it was time to tidy up his affairs.
I bought the vessel and timber about 1997 for $27,000, fully intending to complete her, but I have had too many other projects on.
The ‘Bounty’ is a 34’ vessel, at present in frame. All of the Kauri planking milled in 1958 is available. The fore and aft planks are full length, all planking is machined, and the rabbits are all cut.There are a couple of teak planks for cabin coamings.
I feel this vessel is an important part of our history. Aspiring wooden boat builders, of whom there are currently very few, could be encouraged to study the construction and fine workmanship, and even to work on the vessel. Today it’s a rare thing to smell heart kauri in a steam box. Budding boat builders don’t have many opportunities to work on such a vessel.”
Todays a shout out to anyone that is this person or knows someone that is – looking for a work-life change. If you have a CV you’re probably not who we are looking for 🙂
In no particular order does this sound like you –
• Good practical hands on general skills
• Not afraid to roll your sleeves up and just get the job done
• Sense of humour
• Looking for full time / part time / flexible hours
• Age open – young > old, its all about attitude
We offer –
• Small passionate team
• Central Auckland location
• Working railway slip – one of few left in Auckland
Todays story comes to us from retired boat builder Allan Hooper, just back from an extended trip to visit family the USA (Carlsbad just north of San Diego). I’ll let Allan tell the story :-
Prior to leaving I made contact with Morgan Spriggs the current owner of Lola, an NZ37. Lola was built at Jim Young’s NZ Yachts in 1969-70 while I was the foreman.
I was very keen to see the boat after all these years. Morgan has spent a lot of time restoring Lola and she looks as good as the date she left the factory apart from a few alterations and replacements. Morgan was excited to meet me and be able to talk about the build of the boat.
The hull construction is 4 skins of 1/4’” Kauri cold moulded with all of the back bone, floors, transom and bulkhead boundarys set in the mould. The hull was sheathed in Epoxy and glass. After the hull was taken off the mould the bulkheads and the interior were put in place and gunwales fitted.
The cabin, cockpit and decks were built on a separate mould complete with paint work, glazing and hardware. Then in an operation taking only a couple of hours, was lifted and placed on the hull, located over the bulkheads, glued and fastened down.
The techniques developed to build these yachts enabled a NZ37 to be built from start to finish in 4 weeks.
Morgan‘s father Robert owns a beautiful picnic boat, Easterly (photos below), an ex Maine lobster boat on which we toured the San Diego bay.
It was used by Denis Connor is a chase boat when he was sailing in the Americas cup. Robert Spriggs has owns the boat for 22 years and it is in as new condition, you could have eaten your lunch of the engine or engine room floor.
The teak cockpit sole is the best laid teak I have ever seen, the timber selected is absolutely perfect, as was the whole boat.
The waterfront at downtown San Diego has a beautiful collection of maritime exhibits including a sailing immigrant ship the “Star of India” which was a regular visitor to New Zealand in the 1800s, once a year it is taken out for a sail.
Further along the waterfront is the USS Midway launched in 1945, she was finally laid up in the 1990s. If you’ve never been on an aircraft carrier it’s well worth a visit. 3.5 acres of 3 inch thick steel makes up the flight deck. It is an interesting harbour to visit and extremely busy as it is alongside the international airport, a military airport, a naval base, several marinas and the city. When you go out on the bay you see it and hear it all.
Our friends across the ditch in Tasmania that pull together the Australian Wooden Boat Festival, commission some wonderful short films that provide an insight into the people and vessels that help make the AWBF so special.
We have featured several in the past and todays one is just such a cool, warm, feel good story. We meet Matt and Iefke – a young couple that were drawn together by a shared passion for wooden boats and are now building the boat of their dreams – Tarkine.
Both Matt and Iefke take us on the journey of how they meet, and express in words the reason why we do what we do and why we love wooden boats.
If today is anything weather wise like yesterday – find that spot x in the house and sit back and enjoy this short film.
The 1926 Charles Robinson built, St Mary’s Bay, Auckland launch – Aloha has appeared twice on WW but we have never been up close. Yesterday she came into the Slipway Milford for some TLC. A resident of Bayswater Marina, her bottom would have to be the worst I’ve seen ex there.
Interesting point – as Aloha came up the Milford Creek , she slipped past the launch Aumoe, the two boats had been regular cruising buddies in the mid 1960’s > 1970’s – and were always rafted up together. They even had side-by-side boat sheds in the Whangarei Town Basin. Powered these days by a Yanmar 125hp engine. Hopefully we can get a few more details on her e.g. length etc
Woody Bruce Ryrie has taken on a project – a c.1960’s Couldrey classic launch that he acquired from the Firth of Thames. Unfortunately no name, so the first ask is does anyone know more about the boat?
The second ask is a little bigger, as you can see in the above photos there are a few planks that need replacing and Bruce would really appreciate a hand with the work, or even some guidance.
The launch is hauled out at Clevedon.
WE ARE LOSING OUR WATERFRONT – Okahu Bay Haul Out
It has recently been brought to my attention that our friends at Auckland Council are very anti boating – read below a summary of what’s been happening –
It’s not only the government that thinks it knows best. Auckland City has determined that the Haulout at Okahu bay, known as the Orakei Landing, will be shut down and the area will become a park reserve! The local board, despite overwhelming submissions against any change, decided in its woke way that the Landing haulout facilities, which have been a part of Auckland since the year dot, should be closed to provide another park. The haulout has and is being used by many owners of traditional wooden boats where owners as well as professionals work on them near to their homes. With the closure of this there will be no inner harbour haulouts on the Southern side of the harbour. There are also a number of professionals who will be out of a job or whose businesses will be reduced because of losing this facility. Auckland once touted itself as the city of sails. It seems it no longer thinks this is part of its makeup.In credibly the committee of the RAYC sent out an email to its members encouraging them to vote to close the Landing. That was done in a way which unless you read it carefully and understood what was happening would have led to many members completing the form supplied to submit for closure! It all smells a bit.
If you are even slightly motivated to voice your concern re the closure of the Okahu Bay haul out area – I suggest to use the channel I find works best with local politicians – they hate negative publicity – contact the chairman of the Orakei Local Board – Scott Milne direct via Facebook and leave a message – link here https://www.facebook.com/profile.php?id=100007006489029
AND TO MAKE IT EASIER FOR YOU TO VOICE YOUR CONCERNS SEE BELOW
Local Board members that voted in favour of closing the hardstand*:
The 1953 Lane built woody – Ngapuhi started life as a towing launch for Lane & Sons (Timber Millers) at their premises in Totara North, Whangaoa Harbour. Originally named Waihou. Purchased by Northland Port Corporation in 1963 her name was changed to Ngapuhi & she served as the pilot boat for the Whangarei Harbour Board for 35 years.
Brief over view – 45’5″ in length, 12’ beam and draws 3’6”. Kauri carvel planked. Powered by twin Gardner 6LXBM52- 127hp that has her governed at 11 knots max speed.
Given her ex commercial work and being in survey Ngapuhi is very well spec’ed.
Other than the occasional cruise to Auckland and the outer islands, home has been the Far North.
Fast forward to mid 2022, sees Ngapuhi residing in Auckland and getting a birthday – like a lot of ex work boats there was a degree of deferred maintenance that her new owners are addressing. The new paint job is rather swish. Looking forward to her joining in on some of the woody events coming up this summer.
Photos below per-purchase at Opua
UPDATE 18-08-2022 – Ex Ray Morey – Ngapuhi ex Waihoa was designed and built by Brian Lane himself at the old Lane property in Totara North. Original engines were a handed pair of GM 4-71 @ 115 hp. N.H.B replaced these with Detroit 4-71N series engines after several years of service.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 14+ million views 