PANDORA After all the shinny paint yesterday probably best to have a work-boat story today. The 48’ fishing boat – Pandora was built in the late 1960’s at the Alex Baxter Yard in Whangarei.. Her original owners were Brook and Winston Richards of Kaitaia, who had her built for commercial crawfishing. But she was set up so she could be converted to trawling within a few hours.The photo taken on launch day is dated Feb 1970 and is ex Photo News, and comes to us via Lew Redwood’s fb. A comment there stated that Pandora was the best looking fishing boat built- big call, but she is a looker.
The news paper headline read – ‘$40,000 Boat Launched’ so she must have been out there in her day.
Do we know what became of Pandora?
Remember the Riverhead Tavern Woodys cruise today – lots arriving by car, so if you are put off by the weather – take the car for a spin 🙂 details below
Around The Yards – Centaurus Angus Roger’s 42’ 1967 1968 Bailey & Sons built launch – Centaurus has been tucked away over winter in a shed up the Tamaki River getting a serious serving of TLC to her hull. I understand that there was an accumulation of old anti-fouling removed, back to bare wood, and the process started again. Looks very impressive and back in the water later this week, Just in time for the Woody Riverhead Tavern lunch cruise on the 20th June.
Since buying Centaurus in late 2019, Angus has undertaken numerous upgrades and enhancements to the vessel, that sees her in the best condition of her life. I will have to reserve him a ringside wharf berth at the Tavern wharf 😉
Todays photo is dated 1969 and shows a camping ground, tagged – ’Smiths Holiday Camp, Paihia ’. Not sure exactly where that was, but its a mirror of my summer holidays at Simpsons Beach Camp on the Coromandel. Even the dinghy in the foreground. My father built me one, it took 4 kids to just move it – built like a brick out-house 🙂
I love the fact that there are so many kids playing in the water and it appears no adult supervision – we have become so PC.
I Feel Like Kim Kardashian
Lots of body shaping, filling (botox) and make-up under way on my old girl – the rudder and surrounding area was a mess and in need of some TLC. New – rudder tube, shaft, arm and bearings have been crafted and installed, yet to sea trial but its just so smooth to operate, the previous setup was very rudimentary.At the same time lots of other work underway, its been a long 3 weeks.
Hine Moana II Todays woody is named – Hine Moana II. She is 35’, carvel planked kauri and built by Jorgensen & Sons, Picton in 1963. Powered by a 145hp Perkins T 6.354 engine. Her owners are Phil Hogg, Tony Bishop and Murray Cederman – who share the maintenance and upkeep. Her home berth is the MYCC, Port Motueka, where she has resided for the last 21 years.
Hine Moana was built originally as the Commodores launch at the Royal Port Nicholson Yacht Club.
ROYAL FALCON – FYI – Fantastic response to yesterdays story on Royal Falcon, the 3rd largest viewing day for the year – and almost no varnish 😉 For the petrol (diesel heads) below is a short clip of the Commer TS3 being fired up for the first time post re-build. Owner Steve commented that the puff of smoke is the residual lube oil from the new cylinder sleeve installation 🙂
The 35’ motorsailer Hinemoana II was launched in the late 1960’s (c.1965) who for is unclear but possibly for Mr. P. W. Anker of Wainuiomata Wellington.
Six months after she was launched in July 1966, she ended up on the beach at Eastbourne, just short of the seawall, during a severe Wellington storm, having broken her new mooring, refer top photo. Reports are that she sustained no serious damage.
Fast forward to 2018 and she pops up at Gulf Harbour, Auckland receiving some TLC. B/W photo comes to us ex Sea Spray magazine and the GH ones + details via Ken Ricketts. Do we know what became of her between 1966 and 2018?
Mystery Launch On The Tamaki River I spotted the above launch a couple of weeks ago while mooching up the Tamaki River onboard Angus Roger’s launch – Centaurus . She looks very well cared for and well rugged up for winter. Can one of the river rats tell us the name and any known background on the launch?
Input from Mark McLaughlin = The mystery boat is ORA-KIA, designed and built by Snow Waters in 1963.
Also Up The River
Unless you were traveling by boat, you wouldn’t normally see the dry stack (I think its called something like – Tamaki Boat Park) on the banks of the upper Tamaki River. Appears to be well populated and anything that gets people towing boat trailers off the road during weekends gets my tick 🙂 And if you are wondering what happens to all the trailers – some boats are ordered new without one, but for those with trailers, there is a smaller staking system on-site for empty trailers
Today’s tale comes to us from Bay of Islands woody – John Gander via Dean Wright and covers a wee oops that the 1967 Jorgensen built woody workboat had in Port Hardy, in the Marlborough Sounds in the mid to late 1970’s. As always,I’ll let John tell the story.
“Our phone rang in the early morning and there was a certain amount of urgency in the callers voice ‘Rutherford’, the ‘Matai’ is aground in Port Hardy, get your gear together, I have a chopper standing by at Omaka get here as quick as you can.
The caller was Bill Rutherford, marine assessor, I had done a lot of salvage work and repairs with Bill, and I knew the Matai and Gerry Fissenden her then owner-skipper.
Maitai is a carvel built launch designed and built by Peter ‘Pop’ Jorgensen at his Waikawa Bay boatyard for Ray Roach. Ray was a well known and very experienced commercial launch man in the Marlborough Sounds, and with a majority of properties in the Sounds having no road access at this time, tow boats with a punt astern or alongside were a common sight, often loaded with building materials and machinery, or farm stock.
Pop Jorgensen’s brief was to design and build a manoeuvrable, strong tow boat with a good towing post, to handle a sixty foot punt, she was powered by a 4-71. N series G.M. with a 3:1 reduction with a four blade Nalder propeller, and launched in 1967.
I arrived at Omaka airdrome as the helicopter was being made ready, a quick loading of my tools including dive gear, tanks and air lift bags. We didn’t know at this stage if Matai would be above or below water, there was one possible complication. It is very rare to see fog in Blenheim, but this day was one of those rare days, thick fog not ideal for flying in such restricted visibility. With a heavily loaded helicopter with three of us aboard the pilot’s option was to fly just above the main highway and follow it to Havelock, I was relieved to see the fog was clearing as we flew out over the water at Havelock, it was here that the pilot thrust a lands and survey map into my hand, saying you know the way guide me in the right direction.
I was a bit concerned at this low altitude flying it takes a bit of getting used to, but one thing we wouldn’t have far to go before a splash, and it was a bit of a relief for me, as we just cleared the hills at Port Ligar to fly across Admiralty Bay to Port Hardy, d’Urville island. As we flew over we could now see the predicament that Matai was in.
There was a gale of N.W. in Tasman Bay and the Cook Strait, and Gerry had left the punt anchored with a load of sheep aboard in Wells Arm, and was then making his way in East Arm towards Allman Bay when right on H.W. Matai went up on an off lying rocky point, it was about a 3.2 m.tide that was falling and we could see the urgency of the situation.
A great thing about a chopper is that a quick fly around gave us a good look and we could see that some props were needed and fast before she healed over much more, there were some sizeable Manuka trees further up the hill but nowhere to land nearby on the flat at hight tide. As the pilot brought one skid to rest on a rocky outcrop on the side of the hill, I was given instructions to keep my head down when I got out with sharp saw in hand, he didn’t have to emphasise these instructions. In quick time I was up the hill to cut three good size Manuka and then slide these down to the waiting dinghy, it was a wet job but we had these in place with not too much time to spare and Matai was made secure as she continued to dry out.
Bill put a call out and the Trawler ‘Marina May’ left Motueka to make her way to d’Urville Island in heavy seas, she had a rough passage but arrived before high water in the late afternoon and a tow line was made ready. Her skipper Robie Bloomfield positioned her just right and with a gentle hand on the power, eased ‘Marina May’ ahead quietly and with her own engine assisting Matai cleared the rocks and was afloat and away from the point.
It was three days before the sea subsided enough for us to leave and see Matai on her way, but she had comfortable accomodation and Bill and I were still on the payroll until we left Port Hardy. I think the Insurance company was well pleased with only a slipping and a small section of keel batten to be replaced”.
Following on from yesterdays teaser and results oops – I’m a launch person wont know an L Mullet boat from an H Mullet boat – no one died, its a new day, we move on.The winner of the actual Lipton Cup, hosted by the Ponsonby Cruising Club – L division (22’) was Orion, 2nd went to Limited Edition, with Tamerau 3rd.The H division winner was Corona. As of Sunday night there were no results posted on the PCC website – so at some stage soon 🙂 go there for details.
There are lots of tales around how the PCC obtained the magnificent trophy, which was crafted by the same jewellers as the Americas Cup – you can read more about the history of the cup here https://www.pcc.org.nz/history
I was land based, using a long lens so some are a little fuzzy, but you get the vibe of the day. Sorry if your boats missing – drop me an email and I’ll check the photos, took lots, but some had other boats in the background etc. As always click on photos to enlarge.
Good to see Geoff Bagnall floating around on his launch, must have escaped Gisborne for the weekend 😉 Photos below ex Don MacLeod
The Start Rounding The Second MarkFleet Leaders Second Mark – Tamatea > Orion > Tamerau > Limited Edition
Waiheke Island residents Tim & Michelle recently purchased the 1966 Brin Wilson designed, Fred Lidgard built launch – Buccaneer from Wellington and will / have relocated her to the Waitemata – we like that, far too many woodys disappear south and it takes years to get them home again. Buccaneer has spent the last 15 years in Wellington and its rumored she has crossed the Cook Strait more than 180 times. She measures approx. 34’8″ x 10’8″ v 4′ and is powered by a Ford diesel engine, HP unknown.
It has been noted that when launched she may have been Brin Wilson’s own personal boat. Keen to learn more about Buccaneer, ideally in the launch date > heading south period.
Input from Terry Gosden – In the 70s Buccaneer was berth in Milford Marina under the ownership of Graham Shaw(owner of Shaw Motors in Milford). The fly bridge was put on by John Gladden.I remember Graham been a first glass painter, the finish he got on the topcoat was like a spray finish.I also made and fitted the frd cabin top hatch for Graham. I also think she call back to the creek later under a new owner
MOBILE BOAT BUILDER
Recently I have had several people inquiring about the availability of a crafts person for small jobs e.g. repair cupboard doors, fix broken shelf, fix loose boarding platform etc.Someone that travels to the vessel and does the work on-site. Can anyone recommend someone (Auckland based), might be suited to a semi-retired person. Drop me an email if you can help waitematawoodys@gmail.com
Manaia has made several appearance on WW, link below the backgrounds her early days . She was designed by Alex Collings and built in 1965 by Percy Vos. Now thanks to a nudge from Alan Sexton and tme – we get to see the results of some of the recent work on her. She is looking very smart for an ex Harbour Board Pilot boat 🙂
Currently offered for sale but you’ll need a 25m marina. Contact waitematawoodys@gmail.com