Matai And A Matter Of Urgency 

Matai And A Matter Of Urgency 

Today’s tale comes to us from Bay of Islands woody – John Gander via Dean Wright and covers a wee oops that the 1967 Jorgensen built woody workboat had in Port Hardy, in the Marlborough Sounds in the mid to late 1970’s. As always,I’ll let John tell the story. 


“Our phone rang in the early morning and there was a certain amount of urgency in the callers voice ‘Rutherford’, the ‘Matai’ is aground in Port Hardy, get your gear together, I have a chopper standing by at Omaka get here as quick as you can. 

The caller was Bill Rutherford, marine assessor, I had done a lot of salvage work and repairs with Bill, and I knew the Matai and Gerry Fissenden her then owner-skipper. 

Maitai is a carvel built launch designed and built by Peter ‘Pop’ Jorgensen at his Waikawa Bay boatyard for Ray Roach. Ray was a well known and very experienced commercial launch man in the Marlborough Sounds, and with a majority of properties in the Sounds having no road access at this time, tow boats with a punt astern or alongside were a common sight, often loaded with building materials and machinery, or farm stock. 

Pop Jorgensen’s brief was to design and build a manoeuvrable, strong tow boat with a good towing post, to handle a sixty foot punt, she was powered by a 4-71. N series G.M. with a 3:1 reduction with a four blade Nalder propeller, and launched in 1967. 

I arrived at Omaka airdrome as the helicopter was being made ready, a quick loading of my tools including dive gear, tanks and air lift bags. We didn’t know at this stage if Matai would be above or below water, there was one possible complication. It is very rare to see fog in Blenheim, but this day was one of those rare days, thick fog not ideal for flying in such restricted visibility. With a heavily loaded helicopter with three of us aboard the pilot’s option was to fly just above the main highway and follow it to Havelock, I was relieved to see the fog was clearing as we flew out over the water at Havelock, it was here that the pilot thrust a lands and survey map into my hand, saying you know the way guide me in the right direction. 

I was a bit concerned at this low altitude flying it takes a bit of getting used to, but one thing we wouldn’t have far to go before a splash, and it was a bit of a relief for me, as we just cleared the hills at Port Ligar to fly across Admiralty Bay to Port Hardy, d’Urville island. As we flew over we could now see the predicament that Matai was in. 

There was a gale of N.W. in Tasman Bay and the Cook Strait, and Gerry had left the punt anchored with a load of sheep aboard in Wells Arm, and was then making his way in East Arm towards Allman Bay when right on H.W. Matai went up on an off lying rocky point, it was about a 3.2 m.tide that was falling and we could see the urgency of the situation. 

A great thing about a chopper is that a quick fly around gave us a good look and we could see that some props were needed and fast before she healed over much more, there were some sizeable Manuka trees further up the hill but nowhere to land nearby on the flat at hight tide. As the pilot brought one skid to rest on a rocky outcrop on the side of the hill, I was given instructions to keep my head down when I got out with sharp saw in hand, he didn’t have to emphasise these instructions. In quick time I was up the hill to cut three good size Manuka and then slide these down to the waiting dinghy, it was a wet job but we had these in place with not too much time to spare and Matai was made secure as she continued to dry out. 

Bill put a call out and the Trawler ‘Marina May’ left Motueka to make her way to d’Urville Island in heavy seas, she had a rough passage but arrived before high water in the late afternoon and a tow line was made ready. Her skipper Robie Bloomfield positioned her just right and with a gentle hand on the power, eased ‘Marina May’ ahead quietly and with her own engine assisting Matai cleared the rocks and was afloat and away from the point. 

It was three days before the sea subsided enough for us to leave and see Matai on her way, but she had comfortable accomodation and Bill and I were still on the payroll until we left Port Hardy. I think the Insurance company was well pleased with only a slipping and a small section of keel batten to be replaced”.

606 Rosebank Road, Avondale

3 thoughts on “Matai And A Matter Of Urgency 

  1. Nice to find out a bit more of Matai’s history.
    Very dramatic photos that show off her hull shape nicely; probably not pleasant viewing at the time.
    We purchased Matai from Allan Foote in 2018; and after a 50+ year working life she has “retired” to Port Chalmers.
    Sadly no logbooks or old photos came with her; though we got some pics of her on the Havelock slipway with her hull-sister Anna Dee on the cradle behind.
    Anna Dee fished out of Port Chalmers in the 1960s & 70s, then went north and was converted for charter work. I believe she is still operating, so you could say they’ve swapped places

    Like

  2. Great story and timely save of Matai
    Unfortunately Insurance co’s are not so forgiving these days.
    We have a Jorgensens build too
    ‘Liberator ‘
    Great boats….Jean & Grant Semmens

    Like

  3. I remember “Matai” being built; Ray worked on her himself as well.
    The 3rd pic shows off her distinctive Havelock-style hull form; deep forefoot, no drag to the keel, and a slight hollow in the run. The latter kept the draft shallow, as the channel to Havelock was very tidal (I hear it’s been dredged deeper now), while the horizontal keel and deep forefoot allowed the boat to “wriggle” clear if she touched the putty – rocky reefs not included 🙂 .For reasons that aren’t totally clear, boats with this hull form tended to run a tad faster than you’d expect for their length and horsepower.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s