A Woody On Tour + An SoS

DSC05406

SARAHS W 3

A Woody On Tour + An SoS
Woody Paul Drake has just returned from a trip to the UK & sent in the above 2 photos – the first showing a very smart inboard clinker on the beach at Beer, Lyme Bay (1/2 way between Brixham & Portland Bill).

The bottom photo is of the Navy MTB24 ‘resting’ at Bembridge, Isle of Wight. Paul commented that she no longer rises with the tide 😦

An Urgent SoS

Unknown-1
WW follower Scott Perry, has a small obsession with rather large woodys – he is currently rebuilding the HDML Kuparu, an ex naval patrol boat. He is nearly done with Kuparu & is now looking at saving HDML Black Watch, the 72 footer sitting out in front of Bayswater Marina for the last 10 plus years.
Scott is urgently looking for somewhere he could tidal slip her e.g. against poles, or a wharf, somewhere on the Waitemata. She has a bad temporary repair on her bottom that is failing & needs attention in the next couple of weeks. She has a swim prop, so can lean her on her side on the beach or deep creek. Any woodys know of anything about?
As an aside, she currently is ketch rigged & with Scott being a launch man, he would like to sell her 2 solid timber masts – so if someone would like to purchase them, you would make Scott a happy man. Scott can be contacted on 027 278 2542
Ps I’m sure Russell Ward will email be a photo of Black Watch, he had / has the ‘hots’ for her

Input from Russell Ward 

Jeez, Scott. Knocking yourself around a bit ain’tca? You can get pills or ect for that sort of problem I am sure.
Why not take on the Kahu? Lots of fun! I’ve attached a couple of pix of Ngaroma when she was a private ship owned by Capt James Lawler and kept at Cooks Lower Landing. The fair miles were built in NZ as part of the war effort and one should be saved.
Just a thought.
R
Unknown-3
UPDATE: Photo below ex Heather & Keith Nicholson of Kahu (taken last week)
20170716_104503

Input from Paul Drake – below are two pics of my more humble HDML effort. This is MAKO, 36 inches long (half inch to the foot). I started building her in 1964 aged 16. The following year I was at sea with the Union Company as a Cadet. As shown in the first photo, I took MAKO to sea with me and building continued. The second pic shows her under way and more or less finished on the Avalon duck pond (Wellington). She now resides on my piano here in Taupo – still only more or less finished.

Unknown

Unknown-1

Updated photo of HDML Kuparu – berthed at Bayswater 07-07-2018

_1030506

Tautane (>Centaurus)

Serenity

TAUTANE (>Centaurus)

The above photo of Tautane was sent to me by her owner Clare Robinson, Clare is hoping that we can uncover more on her past.

What we know is that she is a Miller & Tunnage, completed in 1945 or 1946, operated as fishing vessel for a time and then was purchased by the Napier Harbour Board as their pilot boat and renamed Tautane. Sometime during her tenure there, a Detroit 6-71 manufactured in 1963 was fitted to replace a lower power Gardner.

She was purchased by Colin Davenport in about 1993 and was used to ferry guests out to Endeavour Inlet in Queen Charlotte Sound and for day fishing and diving charters. Colin added the canopy.

Clare bought her in June 2017 and is in the process of converting her to a live-a-board.

The photo shows Tautane as she is currently, sitting at Picton wharf next to the ferry terminal in May 2017. Clare has advised the boat is now named – Serenity.

Do we have any more information on? Russell W you must be able to help?

Input from Russell Ward – below are two photos of the ship one as originally launched – Centaurus and the other being used as she should be. More details in the ww Comments Section.

Update 15-05-2020 Line drawings below sent in by Murray Wikinson. Brian Engliss ex Miller & Tunnage foreman sent them to Brian years ago. Andrew Miller of St Leonards designed the hull for Miller & Tunnage. Murray owns a near sistership “Golden Light”.

Serenity (ex Tautane)

Knoxie

knoxie old

KNOXIE
The above photo of Knoxie shows her when Fullers in the Bay of Islands owned her. Ray Morey who commented that she got her name from her engine at the time, a 4 cylinder ‘Knox’, sent the photo to me. I understand they also made trucks in the 1920’s.
Harold Kidd has given Ray her history but along the way he has lost it, so hopefully Harold will repeat it for us 🙂

Input from Harold Kidd

KNOXIE was built by Brown & Dalton in Mt Eden in late 1911 and sold to R.J. Acheson, Stipendiary Magistrate at Russell, in June 1912. She was shipped north on a scow. Fullers bought her from Acheson and converted her to a workboat. That work was probably done by Leon Warne who is sometimes credited as her builder, Her engine was a Knox twin cylinder two stroke of nominal 15hp., hence her name. Fullers had installed an Ailsa Craig by 1933.
Knox built cars and trucks at Springfield Massachusetts until about 1924.

Tamahere – A Peek Down Below

Screen Shot 2017-07-31 at 9.45.24 PM

Screen Shot 2017-07-31 at 10.02.56 PM

TAMAHERE – A Peek Down Below

Tamahere last appeared on WW back in 2014 (link below), now thanks to a trademe listing we get to see down below.
She is 40′ long & powered by a 85hp Isuzu diesel that pushes her along at 6>8 knots. Its claimed she was built in 1903.

Back in 2014 we were unable to uncover any details on her, there lots of thousands of more WW readers these days, so hopefully we can unearth more on her.
Thanks to Ian McDonald for the listing heads up.

See / read more here    https://waitematawoodys.com/2014/03/17/tamahere/

18-04-2018 ‘New’ Photos below ex trademe

 

Willie-O

Unknown-2

WILLIE-O

Another photo from Dean Wright, taken in the late 1980’s at Russell in the Bay of Islands. This time its of the classic wooden game launch – Willie-O.

Who can enlighten us more on this beauty?

03-07-2017 Update & photos below from Michael Best (owner)
Willie Oliver built the Willie O in Tauranga approx 1974. He used her as a charter boat for a couple of years out of Tutukaka. Robin Cutfield from Tutukaka then used her for charter work for many years in the Bay of Islands.
Michael has owned the Willie O for approx 11 years. The enclosed fly Bridge was on her when I bought her (can’t blame him for that – Alan H) Willie O is approx 41 feet long, 13ft beam and 4ft draft. Power is from a 3208 Cat 210 hp. Hull is ship plank kauri with mahogany cabins sides.

 

Lady Doreen – Win a WW T-Shirt

Lady Doreen @ Russell

Lady Doren a

Lady Doreen – Win a WW T-Shirt

As mentioned yesterday, Dean Wright also sent in the above two photos from the Snook Fullers collection. In the 1st photo we see Lady Doreen coming into weigh two marlin at Russell (the anglers left to right in the cockpit Ist guy unknown, WG Sherman, Bill Pocklington, Emmet Olsen, 5th guy is the deckie, name unknown).
In the 2nd photo with the 3 kingfish over the side – I’ll give a WW t-shirt to the first woody that can name the Maori gent standing on the left in the cockpit. Answers only via the WW comments section. (If you have won one already, you are out of luck)

31-07-2017 Update – In the comments section Lindsay suggested that the mystery person could have been Kura Beale, it wasn’t – the correct answer was Matt Rata. But Dean Wright sent me the photo below of Kura weighing in a thresher shark.

Kura Beale

 

 

PRESTO – Is She Or Isn’t She?

Screen Shot 2017-07-26 at 5.24.12 pm

PRESTO – Is She Or Isn’t She?

If you believe the trademe listing, this is a very old lady – it says Presto was born 1898. Built by Charles Bailey, 42’ in length, 3 skin kauri. Originally powered by a steam engine but now powered by a 1950 100hp, 471 Detroit diesel.

Our resident Bailey guru HDK should be able to confirm or destroy this woodys birth details. Builder aside – what more do we know about her?. Current home is Taurangi. Thanks to Ian McDonald for the listing heads-up 🙂

28-07-2017 Comments ex Russell Ward
Port Doctor’s Boat. General workboat around the place when I was a kid at school. Had a boxy wheelbase with control position atop. Always scuttling round Hobson Wharf. Eventually retired.
She lay at Barry Brickell’s Diving Creek property in Coromandel for many years and was sold to a man who did the honours and but put the rakish upper works on her. Painted her green which is what I always remembered her as. Her old wheelhouse may still be at Driving Creek.

presto

Comments below ex Ray Morey
1st an aft view of PRESTO under steam, that cut from the pic of Lady Vie and pan-am flying boat at mechanics bay
2nd is part of the blue boats dated 1973 from left is RANGI-SPRAY-unknown and just showing on the right is PRESTO after rebuild. This when Subritzky owned her.

Photo below from Dave Stanaway from when he knew her in the 1960’s when Bryce Subritzky was her master.

IMG_0693

Input from Harold Kidd – below is a clipping from the Auckland Star, 30 March 1898 – covering the launching.

Screen Shot 2017-07-28 at 9.30.36 PM

 

Read lots more on the Comments Section

Lady Clare

Lady Clare-3

Lady Clare -2

Lady Clare-1

LADY CLARE

The above photos of Lady Clare were sent to me by Dean Wright, they date from the 1980’s when Dean was game fishing.

Dean recalls that Lady Clare  was owned at the time by a chap named Peter Clarkson, but his memory may be clouded, it was the 80’s J

In the photos above she’s being skippered by John Batterton & they’re weighing in a Broadbill at Paihia c.1987.

What more do we know about Lady Clare & where is she today?

UPDATE Some historical photos ex Ken Ricketts below – not sure if the varnished coamings are as orginal – but the ones of her with a block of flats on top, show her at Mahurangi a couple of years ago. Read more about her past in the comments section of this post.

 

 

Ngaroma

Ngaroma

NGAROMA

The above photo of Ngaroma, with the #85 on her, was sent in by Lew Redwood & is ex the NZ Herald heritage image collection.

She was built in 1910 by Collings & Bell & when launched, called Hazel. You can view photos of her on this link, when she was rigged for big game fishing     https://waitematawoodys.com/2015/05/07/12500/

Anyone able to ID the other two woodys? & as a wild shot – what they were up to i.e. an event?

Photos below of Hazel ex Jason Prew – Okahu Bay 2003 – before her one way trip to NZTBS 😦

DSCF0016

DSCF0015

A Woody Trip Out West

P1250252

P1250253

Steve Cranch

A Woody Trip Out West – NZ Traditional Boat Building School Re-opens

I received an invite the other day in the mail (nice for once to not be via email) to the re-opening of New Zealand Traditional Boat Building School. Getting it made me very happy – firstly, because we all need the school to be a success & secondly because I personally have fond memories of the original school (read more below), I attended numerous CYA meetings there & also participated in two events – the Robert Brooke – Caulking / carvel planking workshop & a basic boat building techniques course that ran one night a week over winter. Learnt so much & meet some great people.

Today’s function was to share the vision for the future of the school & to meet some of the past & present stakeholders.

I’ll let Steve Cranch tell you the story:

“After nearly four years in recess the New Zealand Traditional Boat Building School has just re-opened its doors in new premises on the Te Atatu peninsula.

The school was founded in 2005 by trustees Robert Brooke, Harold Kidd, Bruce Tantrum and Ron Jamieson and successfully ran wooden boat building courses at Hobsonville for seven years before being forced to move to make way for the new housing development.

During that time hundreds of students attended classes on everything from traditional boat building to apprenticeship training and small boat building in which students built their own small boats to take home, often involving a son or daughter in the process.

Our new premises are much smaller than previous so we have been forced to restructure how we run our courses and a new program is being developed. It will kick off with a full day seminar on winter maintenance. Six specialist speakers will present on topics ranging from Diesel engine maintenance, Batteries and Electrical, Sails and Covers, Marine sealants, Paint systems and common splicing all common winter maintenance issues for the larger boat owner. Following on from this will be a course on re-ribbing clinker built boats and a laminated stand up paddleboard paddle course plus many more to come”.

In a few days when the dates are finalized, I’ll publish them on ww. I would encourage you to support the school; it’s a big step forward in bringing increased visibility & sureness to the wooden boating movement. There is a website, currently getting the final finishing touches, so I’ll let you know the link to that later as well.

Today was also a wee bit of a reunion with a lot of woodys catching up. The best chat was in the car park, where I got to view a very cool RC model of the Bailey designed ex Waitemata Fisheries trawler – ‘Waiwera’ (photos below). Built by Murray White. Stunning attention to detail.

P1250264

P1250260