HOW DO I STOP THE ROLL Well woodys you can’t – all boats roll but you can minimise it – read on.
I was recently included in an email exchange where a classic launch owner was asking Chris McMullen why they should replace the mast (rot issue) on their launch given that there was no plan to make use of a sail. Chris shared with us both a copy of a 1909 extract titled ‘Ballasting of Motor Boats’ from an article by Charles G Davis in the book – ‘Motor Boat Handbook vol. 1’. The article provides all the information required for displacement launches. If the above images are too hard to read – below are links to downloading the articles.
VICTORIA CLASSIC BOAT FESTIVAL – Vancouver – Dockside Tour
Last week we had a story about Peter Knowles and his travel to the Victoria Wooden Boat Festival vis his v-blog ‘Boat Life – Travels With Geordie’. Peter very briefly showed us some of the craft arriving – today we get a dock-side wander, complete with captions for the classic woodys.
I hope the people at Auckland’s maritime museum see this video – re their upcoming Auckland wooden boat festival next year. The stand out observation is the mix of yachts + launches + work boats + small craft – it is all mixed in together and thats what works all around the world – not rocket science……………..
INPUT ex Neil Chalmers – Great video , at 2 56 there is the NZ yacht ‘Two Sisters’ (was sail no. F3) . Has a Woollacott look about her. I often wondered where she got to .
A picture of her at Bon Accord Kawau appears in the ‘Cruising in NZ Waters’ by GR Paul (below). This was the go to book in the 1960’s before to the RAYC Cruising Guide was published.
REMEMBER BOAT BOAT SALE 11am SATURDAY @ MILFORD SLIPWAY – 5 OMANA ROAD, MILFORD $BRING CASH$WW MERCHANDISE FOR SALE
Todays photo is dated Feb 1965 and comes to us from Dean Wright ex the Tauranga Library collection. No mention of the location or builder.
Back in Sept 2022 Dean commented on WW that Norseman was run as a charter boat out of Tutukaka by Phil Bendle for an extend period, these days home is a mooring at Rangitane, up the Kerikeri River.
Photo below taken by Dean in Sept 2022 in the Bay of Islands.
THE REBIRTH OF CENTAURUS I often remark on WW that some boats get lucky in terms of owners and some sadly do not – Centaurus the 1969, 42’ Bailey & Sons bridge-decker is one of the lucky ones. A succession of owners have cared for her over the years, but even the best practices and intentions aren’t enough to ensure a 50+ year old wooden craft is 100% fit for purpose.
When Angus Rogers purchased Centaurus in late 2019, he had already compiled a ’To-Do’ list. Work started immediately on the projects that would make her more live able and comfortable for extended cruising. Fast forward to September 2020 and she was hauled out for an upgrade on systems and the installation of a bow and stern water thruster unit.
Fast forward to June 2021 and Centaurus was out again for a below the water-line back to bare wood refurbish.If you know Angus you will know that in-between all this there were dozens of other enhancements going on.
Fast forward to 2023 and the decision was made to undertake a refit that would see Centaurus live on for another 50 years. Initially most of the work was based around the decision to re-power with a new John Deere 175hp engine, this replaced the original Cummins V6 215hp that was the size and weight a small elephant. As anyone that has done a transplant knows, the to-do list just keeps growing…….
Below is a list of some of the work undertaken, I’m sure a few things got forgotten along the way, but its a tad scary. Well done Angus. WW has recorded a lot of the work over the last3 years, use the WW Search Box to view. Centaurus re-launched last week and looks stunning, ever the perfectionist Angus has another to-do list to finish her off, but he is under the pump to have her at the upcoming Woodys cruise to Clevedon on Sept 30th > .
Overview of recent work One new water tank, two new fuel tanks, all new plumbing and valves and fuel filter, fuel and water sight tubes and valves, new fuel breathers, new28x23 inch propellor, new and re-positioned motor water intake and toilet water intake and valves all Truedesign nylon and piping, new toilet outflow valve, new 175hp John Deere with ccv and a second alternator (Balmar 175 amp) engineered onto continuous belt, new 2.5:1 ZF gearbox, new fibreglass exhaust system, replaced exhaust on Webasto diesel heater with genuine Webasto parts, installed SaltAttack injection system for flushing motor, built dorade tubes for the 4 half funnels on the sides of the wheelhouse, created a soft closure hatch in the cabin top for the future when needed, new insulation for engine room hatches and around fuel tanks. Cleaned up all bilges under motor and painted white. Able to use existing shaft, dry seal and jack shaft which were all replaced two years ago. Anti-fouled hull and Propspeed to new prop.
WW was contacted yesterday by Sue Rivington who advised that she has been going through the family photos and albums and she came across the gems above.
The boat is – Leone that belonged to Sue’s Grandfather George Hyauiason many years ago – unfortunately Sue is not sure when. But she would love
any information on her or details on what became of Leone.
Sue also commented that her Grandfather also owned the ‘Ronaki’ – I have asked for some more intel so we can ID which particular Ronaki it was – there is a promise of photos so fingers crossed.
The Ponsonby Cruising Club + Collings & Bell yard / wharf / railway photo is a doozy – so many boats, so few names.
So woodys can we help Sue out in her quest for intel on Leone.
LOOKING FOR
One of the woody gang is on the hunt for 2 switches as per the photo below – (L) photo is a good one (R) photo has the knob broken off – anyone got two/one laying around?
Woody Angus Rogers has just return from a whri-wind trip to the USA, at the top of his to do list was a visit to the Herreshoff Marine Museum in Bristol, Rhode Island.
I exhibit that caught / captured Angus’s eye the most was the 1905 launch – Thania, designed / built by Nathanael G Herreshoff. Over view 59’8” in length, beam of 10’7” and draws 2’8’.
More details in the photos above, as always click on a photo to enlarge. ENJOY 🙂
Major (christian name, not a rank) Bailey built four launches that we are aware of – thanks to Ken Ricketts and Graeme Varcoe today we get to see them together, excluding the last built, those name is not recorded. The First built was – Florae / Floray (seems to have had an identity crisis over time) , later named Leilani and currently high and draw in a Thanes paddock.
Second was – Flolaine, now named Awatea
Third was – Christine
Fourth – unknown – anyone able to help with details. Amusing (in hindsight) launch day story below ex KR. The Launching And Near Sinking Of #4 Boat
KR commented that Major Bailey had some radical views on boat systems and fit out. With the fourth boat he developed a steering system which was or looked like half a petrol or oil drum encircling each propeller and turning right left which was supposed to direct the prop wash and steer the boat but when you turned the wheel absolutely nothing happened, as much of the prop thrust water just went out the back and the prop thrust was simply lost completely.
#4 had two 6 cyl. second hand Fords, very poorly home converted, and badly installed in the stern with detached vee drives, along other bits & pieces. All the underwater gear seemed to leak through the hull and added to almost sinking post launching, refer below.
KR commented that on launch day she almost sunk immediately on launching and would not steer. The yard would not lift her out again due to a dispute, so they steered her as best they could with the engines as quickly as they could downstream to Eastern Marina Services (Terry Burling). There they beached her on the ramp, to effect urgent matters to make her seaworthy and steerable.
The boat had all sorts of unique bits about her all of which mostly designed by Major Bailey and mostly just did not work.
KR also commented that #3, Christine was very ugly, with the hull, all rough and showing all the planks & seams, and the flare was horrible with a slanting forward deck line at the bow. He was putting more & more radical & impractical ideas in the succession of his boats as they went on.
So woodys it appears and KR agrees that Leilani was the pick of the bunch 🙂 I wonder what became of the fourth build ………….
One of our most passionate and talented woodys – Olaf Wiig is currently based in the UK but still owns back in NZ the stunning 48’ 1953 Lidgard built launch – Ngaro (photo below) which the family cruises on in the NZ summer (when we have one).
After returning this time to the UK Olaf quickly found a woody project to keep his hand in.
The photos above are of Olaf’s 1930’s Andrews slipper launch named – Vega. This is a style of launch which is unique to the upper Thames. The first of its type was a boat called “merc” it is part of the national Maritime museum’s collection https://nmmc.co.uk/object/boats/slipper-launch-merk-from-1912/
Olaf commented that the boat had been out of the water for some time so the main job was to address the dried out bottom planks and re caulk her seams. The more enjoyable bit was to re-varnish her. Some 14 odd coats of traditional yacht varnish and some 24ct gold leaf she was ready for the water. Just in time for the Thames traditional boat festival, and that will be tomorrows story 😉
Over the last 12 months there has been chat (off-line) about the Centaurus’s launch date. As always with events 50+ years ago, things get a little hazy. Last week we were contacted by Graeme and Flo Varcoe and Graeme wanted to clear up any confusion regarding the launch date.
The original owners of Centaurus were the Sibun family and Graeme’s mother was married to Sonny Sibun. Speaking with his sister Graeme was reminded that she was pregnant during the final stages of the build and her daughter, Graeme’s niece was born on March 19th. 1969 and was 3 weeks old at the time of the launching of Centaurus.
So woodys the dates are: Built – 1967/68 – Launched – April 1969
In the last photo above, a close up of her wheel – there is a plaque that states “Built By Baileys 1967” – this is correct, the build did start in 1967, a little unusual to record that rather than the actual splash date – but not for me to question.
During the brother ./ sister discussions a newspaper clipping came to light that Graeme believes was published by the Half Moon Bay Marina. That article appears above, it is a great read, I have also attached it as a downloadable PDF to make it easier to read.
We learn how Centaurus acquired her name – the boat was built in the 100th year of the Chas Bailey yard, so the ‘Cen’ reflects the century and ’taurus’ comes from owner Sonny Sibun’s zodiac sign – Taurus.
As an added bonus the article backgrounds how that lump of an engine – the Cummings V6 215hp diesel (photo below) ended up in the boat. As designed the intention was for a pair of Ford 100hp diesels. Regular WW readers will be aware that Centaurus’s current owner, Angus Rogers has just installed a 175 hp John Deere (photo below)
Centaurus is nearing the end of an extensive refit, and as with most things Angus Rogers rubs up against – Centaurus will be glorious.
UPDATE – Angus Rogers advised the gearbox (Borg Warner) mentioned in the article is incorrect – it was a Capitol.
The above photo shows the 38’ big game launch – Aquarius. Along side the wharf at Russell the Bay of Islands. The photo is dated 1961 and comes to us via Lew Redwoods fb.
Aquarius was built / launched in 1955 by Supreme Craft. She first appeared on WW back in 2018 as a SOS story and over the next 3 years we followed her resume and restoration – links to those stories below + 2018 photos of her leaving Waiheke Island and relaunched in 2021.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 