Earlier this week we featured a 16’ Carl Augustin designed run-about named Mare-Ee-An, today we have another craft by the same designer. A little bigger this time at 40’ and built in 1968.
Sonar Mia popped up back in February in Gisborne on a Turners Auction site after a grounding (their words) and was for sale as-is-where-is. The opening bid was $100. From the photos there was a lot of work needed, but someone may have got a bargain. The engine is a Ford Lees Marine 180hp diesel.
Do we know if she was saved or went to the land fill.
FYI – back in March 2019 a descendent of a previous owner was trying to track the boat down. I forwarded the 2023 Turners link but never heard back from them – that story here https://waitematawoodys.com/2019/03/23/edna/
Major (christian name, not a rank) Bailey built four launches that we are aware of – thanks to Ken Ricketts and Graeme Varcoe today we get to see them together, excluding the last built, those name is not recorded. The First built was – Florae / Floray (seems to have had an identity crisis over time) , later named Leilani and currently high and draw in a Thanes paddock.
Second was – Flolaine, now named Awatea
Third was – Christine
Fourth – unknown – anyone able to help with details. Amusing (in hindsight) launch day story below ex KR. The Launching And Near Sinking Of #4 Boat
KR commented that Major Bailey had some radical views on boat systems and fit out. With the fourth boat he developed a steering system which was or looked like half a petrol or oil drum encircling each propeller and turning right left which was supposed to direct the prop wash and steer the boat but when you turned the wheel absolutely nothing happened, as much of the prop thrust water just went out the back and the prop thrust was simply lost completely.
#4 had two 6 cyl. second hand Fords, very poorly home converted, and badly installed in the stern with detached vee drives, along other bits & pieces. All the underwater gear seemed to leak through the hull and added to almost sinking post launching, refer below.
KR commented that on launch day she almost sunk immediately on launching and would not steer. The yard would not lift her out again due to a dispute, so they steered her as best they could with the engines as quickly as they could downstream to Eastern Marina Services (Terry Burling). There they beached her on the ramp, to effect urgent matters to make her seaworthy and steerable.
The boat had all sorts of unique bits about her all of which mostly designed by Major Bailey and mostly just did not work.
KR also commented that #3, Christine was very ugly, with the hull, all rough and showing all the planks & seams, and the flare was horrible with a slanting forward deck line at the bow. He was putting more & more radical & impractical ideas in the succession of his boats as they went on.
So woodys it appears and KR agrees that Leilani was the pick of the bunch 🙂 I wonder what became of the fourth build ………….
Todays 19’ woody run-about just popped up on tme but isn’t for sale there, the craft is going to auction at Webbs auction house later this month. The price indication is $25>$35k and then on top of that there is 15% buyers premium + 15% gst to pay so it will be interesting to see what price it sells for, if it sells.
Interested in the WW brains trusts thoughts on the Arch Logan design and 1933 Lidgard build claim. Has to have been a name change at some stage, Creme Brûlée doesn’t sit well with the build date 🙂
The sales blurb says kauri carvel construction, pohutukawa trim and carbon fibre reinforced hull, again interesting.
The boat spent most of its early life on Lake Tawawera with one family, then she passed thru several owners before being uncovered in Rotorua. Her original engine, a 7hp marinised Austin 7 Thetis, was found near Okere Falls, Lake Rotoiti and then fully reconditioned.
From Rotorua she was taken to Kawhia for restoration which was completed in Whangarei by the current owner.
Can we confirm / add to any of the above. She is a honey and would fit what I’ll be looking for in a few years, with a heart transplant (the boat not me)
Todays woody comes to us from the Tauranga Library collection via Dean Wright. The photo is tagged – Raruhoa and dated April 1963.
Quite a distinctive craft being a double ender so fingers crossed we can learn more about her and whether she is still afloat.
I assume that the location is Tauranga but I’m not familiar with the area so hopefully someone can confirm the location as well.
UPDATE ex Nathan Herbert – seems the library got the name wrong – its named Renuhou and sadly ended up as a land based sleep-out/shed. Full details at the 2014 storylink below
WW Caps – low profile, 6 panel, canvas caps in the new camel colour topped with dark brown WW embroidered logo has a dash of understated style.
Just click the email link here and tell me your name, postal address and number of caps required. I’ll come back to you with payment details – $38 + $6 p&p. waitematawoodys@gmail.com
In the photo above the launch on the left is Leilani, she first appeared on WW back in March 2016, link here https://waitematawoodys.com/2016/08/13/leilani-floray/ At the time she was high and dry in a paddock in Thames, second photo.
Thanks to Harold Kidd and Ken Rickets we learnt a lot about her – probably designed and built (hull only) by Lidgards and Major George Bailey finished her off. Named Florae / Floray when launched, her original owner was Percy Coutts, more details on her owners in the link.
In her day she was a very fine looking woody, will be sad if she dies a slow death – anyone able to update us on the status of the Leilani.
In the photo the launch in the background is Jolly Roger, built in 1956 by Roy Parris in the mid to late 1960’s this boat was owned by Clive & Bernice Irvine. The Irvines eventually purchased the house besides the Panmure Bridge and berthed the Jolly Roger on the jetty at the bottom of their property. This was probably around late 1960/1970. She made an appearance on WW back in Oct 2015 link here https://waitematawoodys.com/2015/10/15/jolly-roger-2/
I spotted her berthed in the Whangarei Town Basin in March 2020, photo below
Last week WW was contacted by Tim Munro enquiring about a 16’ run-about that his father-in-law, Bryan McLeod, built early 1960’s. The vessel was to a design by Carl Augustin and built in his farm wool shed. Bryan used the run-about regularly into the 2000’s, particularly on the Kaipara Harbour which his farm backed onto but he also took it into a few events on the Waitemata Harbour, as seen in the photo above.
Bryan passed away last year in his mid 90s and the family are getting the boat refurbished.
The reason for Tim’s email to WW and todays question is – does anyone have a copy the Carl Augustin plans that Bryan will have used for the build. And /or is there anyone that has an interest in the designer that Tim could chat to.
UPDATE 10-08-2023 – WW Rocks – Cam Malcolm at The Slipway Milford has a set off full plans and build instructions- photos below just to show the detail included.
2023 Thames Traditional Boat Festival + Woody Kawau Long Weekend
Following on from Sundays story on Olaf Wiig’s slipper launch – Vega, todays photos comes to us from Olaf who attended the Thames traditional boat festival in his slipper launch.
There is an awful lot of varnish on display and the attention to detail is spot on. The festival is on my bucket list. Olaf commented that this years festival didn’t have the usual sparkling weather but there was still plenty of varnish on display. He focused the camera on some of the interesting smaller boats.
There are a few woody events coming up as we enter spring > summer, but I wanted to highlight the plan for Labour weekend (October 21>23). If your anything like me this year has been a non event in terms of over nighting on the boat, so lets all try and make Labour weekend special.
As a bonus the Kawau Boating Club will be re-opening that weekend after a refurbishment, if your not a member I encourage you to join, the club needs help to continue to operate as a haven in the gulf.
Ps you don’t have to be a KBC to enjoy the weekend.
More details closer and pre-xmas event dates below.
One of our most passionate and talented woodys – Olaf Wiig is currently based in the UK but still owns back in NZ the stunning 48’ 1953 Lidgard built launch – Ngaro (photo below) which the family cruises on in the NZ summer (when we have one).
After returning this time to the UK Olaf quickly found a woody project to keep his hand in.
The photos above are of Olaf’s 1930’s Andrews slipper launch named – Vega. This is a style of launch which is unique to the upper Thames. The first of its type was a boat called “merc” it is part of the national Maritime museum’s collection https://nmmc.co.uk/object/boats/slipper-launch-merk-from-1912/
Olaf commented that the boat had been out of the water for some time so the main job was to address the dried out bottom planks and re caulk her seams. The more enjoyable bit was to re-varnish her. Some 14 odd coats of traditional yacht varnish and some 24ct gold leaf she was ready for the water. Just in time for the Thames traditional boat festival, and that will be tomorrows story 😉
Back in March we sadly reported that the Jim Young designed launch – Lady Gazelle (formerly Gazelle) had been struck by another vessel and came free from her Coromandel Harbour mooring. Lady Gazelle ended up on the rocks and sustained enough damage for the insurance company to write the vessel off. Link below to that story.
We were heartened to learn that a new owner had stepped up and bought the boat and had started to repair her.
Today we can report that she was relaunched this week at Clevedon and looks as new. Well done to all those involved in her rebuild.
Over the last 12 months there has been chat (off-line) about the Centaurus’s launch date. As always with events 50+ years ago, things get a little hazy. Last week we were contacted by Graeme and Flo Varcoe and Graeme wanted to clear up any confusion regarding the launch date.
The original owners of Centaurus were the Sibun family and Graeme’s mother was married to Sonny Sibun. Speaking with his sister Graeme was reminded that she was pregnant during the final stages of the build and her daughter, Graeme’s niece was born on March 19th. 1969 and was 3 weeks old at the time of the launching of Centaurus.
So woodys the dates are: Built – 1967/68 – Launched – April 1969
In the last photo above, a close up of her wheel – there is a plaque that states “Built By Baileys 1967” – this is correct, the build did start in 1967, a little unusual to record that rather than the actual splash date – but not for me to question.
During the brother ./ sister discussions a newspaper clipping came to light that Graeme believes was published by the Half Moon Bay Marina. That article appears above, it is a great read, I have also attached it as a downloadable PDF to make it easier to read.
We learn how Centaurus acquired her name – the boat was built in the 100th year of the Chas Bailey yard, so the ‘Cen’ reflects the century and ’taurus’ comes from owner Sonny Sibun’s zodiac sign – Taurus.
As an added bonus the article backgrounds how that lump of an engine – the Cummings V6 215hp diesel (photo below) ended up in the boat. As designed the intention was for a pair of Ford 100hp diesels. Regular WW readers will be aware that Centaurus’s current owner, Angus Rogers has just installed a 175 hp John Deere (photo below)
Centaurus is nearing the end of an extensive refit, and as with most things Angus Rogers rubs up against – Centaurus will be glorious.
UPDATE – Angus Rogers advised the gearbox (Borg Warner) mentioned in the article is incorrect – it was a Capitol.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 14+ million views 