Lady Fair

LADY FAIR - GULF HARBOUR - 1

LADY FAIR IN EUROPE -- EX GOOGLE - 1

LADY  FAIR

Lady Fair was designed by William Garden and built in America in 1960 using cedar. Originally a 67’ ketch, Ken Ricketts was told she was sailed to NZ approx. 7>8 years ago, under her original ketch rig by a previous owner. Then her rigging was removed & she was converted to a motor boat (by the present owner). Her coamings are original & she still has a substantial amount of lead ballast in the bilges.

Her power comes from a 170hp Caterpillar diesel that pushes her along at 7-9.5Kts.  Home has been the Viaduct Basin for much of her time in NZ, her owners live aboard permanently.

In a previous life she spent time in Turkey, c.2013 where she was for sale, it appears her name then was – Haz.

(Note: details ex Ken Ricketts via trade people working on the boat – edited alot by Alan H – NZ photos ex KR, oversea ex google via KR))

30-10-2019 Update from Owner Dave Miller

“Just to put the record straight. No criticism intended.
Lady Fair was designed by William Garden(hull #407), built by Fellowes and Stewart on Terminal Island in LA California and launched in 1960. She was built for Donald Douglas of the Douglas Corporation aircraft company.
She is constructed with bent oak frames and single planked with 2 ½” Douglas Fir. Transom is double planked Mahogany. Stem is Gum and the keel shoe is Ironwood. Designed as a motor-sailer with Ketch rig. Displacement 65 tons.
Engine is a single Caterpillar D342C of 220 max flywheel Horsepower @1300 rpm. In-line 6, displacement 20.4 litres. Weighing 3 tons with transmission. 10.5kts. @1,000rpm. Cruising at ~800rpm, 7.5kts. we burn ~20ltrs per hour Including 2 hrs generator use per day.
Fuel capacity = 12 tons in three tanks. F.W. capacity = 2.4 tons in two tanks. 1 ton holding tank.
A later owner sailed her to Wellington NZ. arriving in 1993. We bought her in 2012 and brought her up to Hobson West in the Viaduct where we remained until a year ago when we sadly had to vacate because – America’s Cup! We are now in Bayswater Marina. To my knowledge she has never been to Europe and has never had a name change. She has been to the pacific Islands a few times.
We hauled out at Gulf Harbour in March and some of the pictures are from that time. Below the waterline was scraped back to bare wood. Small area of worm in the keel and bottom of rudder. Had iron fastener problems so quite a lot of plank work, some rot in lower transom and a LOT of fasteners. The repairs were carried out by ‘Nautical Experience’ (Cory Rademaekers and team) and was to his usual absolutely first-class standard.
Kind regards, Dave and Mary Miller.”

Anyone Looking For A One Off Art Installation

The ‘boat’ below is on trademe – would look great at a pub, cafe or in a serious Woodys front paddock. 
If the seller gets no interest, it will be cut up for firewood – its too cool for that 🙂
Wood appears to be oak, measures approx. 8mx3m. Currently located at Grahams Beach, Awhitu. Its very close to the road so moving her shouldn’t be a major.
Thanks to T Foh for the listing heads up.

Soul Survivor (Fairley)

Screen Shot 2019-03-23 at 6.19.38 PM

 

SOUL SURVIVOR (FAIRLEY)
Soul Survivor sold recently on trademe for $100 to someone from Thames. The listing stated she is 23’6”, double ended kauri carvel planked ex commercial fishing boat (named Fairley) and was built in 1927, by Miller & Tunnage (Port Chalmers, Sth Island) and She is pushed along by a ‘vintage’ Yanmar MX 8hp diesel.
She has spent the last 12 years on Lake Rotoiti, Rotorua, but the last 5 years on the hard. She made the journey from Dunedin by truck in 2006.
Anyone know who bought her and / or more on her past?

Corsair – Bridge Decker

Janet & Bruce Pullan, owners of the woody – Ann Michelle, came across an old bridge decker launch ‘resting’ in a paddock in the Waikato.
The boats name is Corsair, she is 34’ and the only information supplied by the owner was that she was built by a boatbuilder on the North Shore, started before WW2 and finished after the War. He believed the name was original.
I know its a big ask – but does anyone recall a launch that matches these specs?

John Salthouse Crosses The Bar

John Salthouse

John Salthouse Crosses The Bar
Sad to hear that John Salthouse, the founder of Salthouse Boatbuilders passed away on Sunday night. If you have any doubts as to the extent of the mans input to our classic woody fleet just type SALTHOUSE in the WW search box & you’ll be amazed by the craft that John either built or enhanced in his lifetime. Below is a gallery of just some of the craft that Salthouse Boatbuilders have built.
Our thoughts go out to the extended Salthouse family. While he has left us, his legacy will grace our waters for many many years to come.
TRINIDAD

SEA ROGUE – Why Is the Price So Low

 

Screen Shot 2019-03-20 at 7.40.56 AM

Screen Shot 2019-03-20 at 7.46.25 AM

Screen Shot 2019-03-20 at 7.46.06 AM

Screen Shot 2019-03-20 at 7.45.04 AM

Screen Shot 2019-03-20 at 7.46.15 AM

SEA ROGUE – Why Is the Price So Low
Question of the day – why are woodys so cheap in the USA compared to here? Is it a numbers game? Or is the cost of ownership (haulage, marina berth, insurance etc) make them unaffordable?
David Glen sent me a link to Sea Rogue a 54’ 1972 pilothouse, trawler style woody that was designed by naval architect Arthur Defever and built in 1972 by the Oriental Boat Company in Japan.
If you believe her 4sale listing she has been continuously upgraded by a meticulous owner. The zoom zoom is via twin Caterpillar diesels.
3 staterooms, each with head + captains berth in the pilothouse.
Currently located in San Diego – and the price? An unbelievable NZD$174,000.
Even if the motors didn’t go, that’s a very cheap waterfront apartment.

Lady Ellen Restoration Update – March 2019

Lady Ellen Restoration Update – March 2019

Owner Bruce Mitchinson sent in the photos above & report below:

“About half way through the interior fit out so far.
Galley joinery is complete and has been shifted back to the workshop ready for paint.
Built in electrical and navigators consoles, and the new helm station in the queue for paint too.
Down below the new cabin soles and cabin partitions are all in, apart from the partition for the head, which is made, but out of the way while the space is being made into a wet room.
Hull lining and bunk slats all prefinished, ready for fitting.
Plumbing, thru-hull fittings and holding tank all set out, in the next week or two we will have a session with the hole saws to fit all these.
New exhaust pipe fitting will go in at the same time.
We have the engine in bits and all the parts have been stripped back and primed. 
Final coat of paint goes on this week so it can be reassembled and tested before it goes back in.
Electrical and fresh water plumbing coming up soon”
To see/ read more on this restoration project – enter Lady Ellen in the WW search box.
Photos below to show you how far Bruce has come with the LE project – very impressive.

Edna

Screen Shot 2019-03-06 at 9.17.34 PM

EDNA

Today’s launch is Edna and comes to us via Lew Redwoods fb – the caption says ‘Edna aground on the rocks Wellington’.
Given the 44gallon drums strapped aft she must have joined the submariners club. We also see the classic bilge pump (man with a bucket) in action.
Anyone able to tell us more about Edna?
Input from Harold Kidd – EDNA (this one of many) was owned from 1933 in Wellington by A.C. Kellett and named after his daughter. This image is probably from 1950 when she went on rocks in the harbour. No details of builder; probably a rename; Gavin Pascoe may know more.
S0NAR MIA
I have been contacted by Matt Davidson who is trying to locate the whereabouts or information about his grandparents launch MV Sonar Mia. From what Matt understands she was a Carl Augustin Design built in New Plymouth around the mid 1960’s. His grandparents were Logan and Jean Laloli. Logan was one of the Laloli Brothers who founded and owned Laloli Brothers Furniture in Penrose Auckland for some 50 yrs. They sold Sonar Mia in Auckland in the late 1970’s and she may have located to the Bay of Islands. They owned her for some 10yrs and had her moored at Halfmoon Bay Mairina. Any information would be appreciated.

Rebecca

Waiheke Coro Iron Yacht

REBECCA 

This weekend is the last chance to experience ’Sculpture on the Gulf’ on Waiheke Island, I’ll be doing the 2km walk that features 26 new sculptures along the stunning Waiheke coastline including  Oneroa village and surrounds. Organisers say to allow around 2 hrs to enjoy the walk. 

Woody Angus Rogers snapped the above photos of Rebecca last weekend, built by legendary kiwi artist Jeff Thomson from corrugated iron and to quote Jeff “she references early NZ classic yacht designs and the long history of boats moored at Matiatia and elsewhere around Waiheke Island”.
She was inspired by her namesake Rebecca, a 1902 gaff-rigged yacht, now sailing under her original name – Dolphin (see link below for more info & photos) https://tinorawatrust.co.nz/dolphin
 
Note: no woodys library would be complete without a copy of the book ‘Rebecca – The restoration of an old yacht’ (cover below) by the late yachtsman, artist and educator – Peter Smith. I currently own 4 copies, whenever I see a copy for sale (on-line or in a secondhand book shop) I grab it. They make great gifts.
Rebecca book
 
Update 10-04-2019 – looks like the artwork has found a permanent home at Gulf Harbour marina, photo es Ken Ricketts
REBECCA -GULF HARBOUR

Florence Rose – Launch Day

My beautiful picture

FLORENCE ROSE – Launch Day
 
As part of a recent email exchange with Mark Powell, Mark sent me the above photos from the launching of Florence Rose launching at the Chas Bailey and Sons yard.
In a previous WW post Gil Littler confirmed that Florence Rose was designed by Billy Rogers and built at Bailey’s in the 1960’s while he was serving his apprenticeship there. Gil was given the job of lofting her out and making up the frames before Kenny Hitchens (and other tradesmen) became involved in her construction. The hull was built on the mezzanine floor before being brought down to the slipway level by a large forklift to be finished off. 
 
Gil believes she was built for Harry Rose, which we now know is correct, in the photo below we have Mark Powell’s mother, Joan Powell, with Mark in short pants and the gent on the helm is Harry Rose.
 
I took the 2nd photo below of Flo Ro in October 2013 in Station Bay, Motutapu Island. 
My beautiful picture
Screen Shot 2019-03-19 at 6.44.46 PM

Could This Be Zephyr

Screen Shot 2019-03-19 at 6.03.33 PM

Screen Shot 2019-03-19 at 5.46.40 PM

Screen Shot 2019-03-19 at 5.47.36 PM

Could This Be Zephyr

Woody Nathan Herbert spotted the launch above on trademe – the photo show her name as Belinda Lee and the list says she was built in 1940, is 36’ in length.
Current zoom zoom is via a 1952 Ford 120hp diesel. The photos look a little scary but there are the bones of a good woody here if you had the time and budget to attach the above the waterline issues.
Current home is Christchurch, so that may limit her appeal to woodys north of Cook Straight, but the price at <$5k is right, if the Ford is healthy 😉
(b/w photo c.1948 ex K Ricketts)
So Woodys – was Belinda Lee, Zephyr in an other life?
18-02-2020 Update ex Andrea Collings
Andrea has located a couple of photos, see below.  Reproduction is not the best but we roll with that.. The one on the skid, is from when Andrea’s grandfather first brought her.  Andrea commented it has her grandmother, uncle (and she thinks her aunt). Andrea  believes she was having her motor removed.  Her grandfather (Mac Kelly) thought she was to thirsty and put a smaller engine in. 
The 2nd photo is of her has Mac standing and one of his sons sunbathing on her roof.
Andrea is not sure of dates for these photos but believes it would have to be in the 1950’s.
Zephyr remained in their family until about 1985 when she was sold to a man from Auckland who Andrea was told was the gent who took her bridge off. After that Andrea didnt know what happened to Zephyr until she received an email WW and then read Logan’s post.
Andrea has promised to continue to track down any more information and photos, so it can be added to her story.
20191113_193507
20191113_193435
 

30-04-2020 The Continuing Story Of Zephyr

I have been recently contacted by Kevin Lyall who via his mother, Hope Lyall, has contributed more details and photos from the vessels past. Kevins grandfather was a previous owner names – Mac Kelly and mentioned also in Andrea Colling’s input above.
I’ll let Kevin & Hope tell their story.

“The completion of Zephyr was delayed until after WWII, as the government was going to commandeer her as a patrol boat. She was originally powered by a single 165Hp ChrisCraft marine petrol engine, taken from a twin engine WWII landing craft. Not sure if the HP is correct, had a look and could have been a K series or Hercules series engine?

Mum said the original engine was under the floor, but the new engine had an engine cover built which took up space in the cockpit. She was re-powered with a Lee’s marine diesel (Ford)

She sank at her mooring in Awaawaroa Bay late 1970’s or early 1980’s, due to an engine intake valve being left open. She may have sat floating at the mooring for several years after that  as I remember her being beached at Pipitewai Bay and sacks of mussels being removed from the hull,This may have been around the time she was sold on.

We used to visit the family farm at Awaawaroa Bay, board Zephyr at Maraetai Wharf and sit on the bow with our groceries for the trip over the Tamaki Strait, we did this a few times for school holidays and Christmas. Must have been pre 1981.

My mother and family did a lot of trips on Zephyr all around the Hauraki Gulf and out to Great Barrier Island in the 1950’s and 1960’s.
Many stories of fishing and visiting islands and meeting up with other boaties.”

Zephyr DEC1965

Dec’ 1965

Zephyr 1970's

1970’s

31-08-2020 Update ex Logan Bergs

Logan sent in the locker panel below from the launch Zephyr, during the weekend he by chance flipped the lid over and found a list of her previous names on the back of a panel Whilst doing a bit of work on the weekend on Zephyr or Belinda lee as she was called when I acquired her I found a list of her previous names on the back of a panel. When Logan bought the boat it was called Belinda Lee but he has reverted to the original name (Zephyr). Barry was unaware that there had been 2 other names – ‘Lady J’ and ‘True Love’.So woodys – does the addition of these names jog and memories?

Steam Tug Hipi

HIPImnb

hipimm

Steam Tug Hipi

Today’s story features the Chas Bailey built steam tug Hipi and comes to us from Mick Kelly via Harold Kidd. Mick was prompted to write by a recent article by HDK in Boating New Zealand.

Mick commented that Hipi ran aground just south of Whangamata in the mid 1970s.  He used to own the farm adjoining the beach where this occurred.  The previous owner of the farm was called in the middle of the night to rescue the crew.  For his efforts he was presented with the ship’s wheel, which he attached to the bar in his house.

The story as Mick remembers it was that she was towing a barge with a digger to pinch sand off the beaches in the area, and it all went a bit pear shaped.  A local bought the wreck, and bulldozed a track down onto the beach.  He cut off the metal superstructure and towed the hull up to where he could salvage the engine/s which Mick imagines had replaced the original steam engine.

Mick salvaged a few brass fittings, and some bits of Kauri decking which he incorporated into the first launch he built.  He also used the hardwood keel timber for a beam in the shed he built on the farm.

Update from John Bullivant – ‘newer’ photo below, she was built by Baileys in 1909 and was converted to twin Gardner 8L3s at some stage (apparently)

HIPI LATER

Input from Baden Pascoe – Hipi was built in 1909 for Nelson Bros who owned the Tomoana Freezing Works as a lighter tug. In these days Gisborne had no deep water port so the frozen sheep carcases were loaded into insulated lighters and towed out to the roadstead. Initially she had two Simpson Strickland triple expansion steam engines and later replaced with a set of compound engines. The photo above with a wheel house fitted was after a major refit at WG Lowe & Son in 1933. The steam engines were removed and two Petter Atomic T25/2m diesel engines of 50 hp each were fitted. She then returned to Gisborne to carry out the same duties. By this time Nelson Bros had bought into the Kaiti Freezing Works and formed Gisborne Lightering and Stevedoring Co Ltd and their tugs and lighters assets transferred over. During the WWII she came back to Auckland as she was loaned/sold to the NZ Navy to work the submarine nets protecting the Auckland Harbour and based at Islington Bay. After the war she was sold by tender to Parry Bros, a well-known local owner of scows and the tug Glyn Bird. They phased out their scow fleet and replaced them with tugs and barges. Their early tugs were, Glyn Bird, Lady Eva, Hipi, Sibyl (now owned by the Pollards). They removed the Petters and replace them with two Kelvin K4’s of 88 hp each. As the old wooden barges become too small or became too hard to maintain they replaced them with steel barges. Hipi’s barge was Onewaka with a capacity of about 500 ton. She was employed on the sand run to Parengarenga and sometimes carried superphosphate to Te Paki Station with a supply landing at Parengarenga Harbour. The Kelvins were replaced with twin 8L3 Gardners of 150 hp making her the fastest tug on that run and their flag ship. I first saw Hipi in about 1964 while she was delivering super from Tauranga. My father knew one of the crew and I can remember boarding her and stepping over the very high wheel house combing. While she was returning to Tauranga from unloading at Whitianga in March 1976 she went aground below the cliffs at Papakura Bay as mentioned by Mick. The boys had spent the afternoon in the pub, had too much to drink and after a few hours bunked down and put the youngest crew member on the wheel. He too eventually fell asleep and was woken when she drove her self between a rock ledge with the Onewaka trailing behind. At this stage she was not making any water and was basically uninjured. Before they could get her off the wind came up and she became a total loss. They went ashore phoned Buster (Norman) Parry to inform him of the grounding. The farmer looked after the crew until the next day when Buster and Keith Penney the operations manager arrived. I understand her skipper George Little was already in Buster &amp; Keith’s bad book and he was sacked on the spot. Ask any of the old school tug masters and crew and they will tell you about Hipi. She was the superstar wooden tug. Mick, have you a photo of her wheel?

The painting below artist is unknow and was gifted to Baden Pascoe by Keith Penney

Hipi Painting

Hipi on slip 72

24-03-2019 Update  –  via Mick Kelly – The wheel from Hipi resides  in Featherston, Wairarapa, with Teena Pettitt, the daughter of the farm owner (Dave Pettitt) at the time of the incident mentioned above. Photos below.

Mick also sent in the photo of a door in his house that features recycled skin fitting and nails from the wreck of Hipi.
20190323_095124
20190323_095157
IMG_0283