Deodar

deodar-mow-labour-weekend2016a

deodar-mow-labour-weekend2016c

deodar-mow-labour-weekend2016b

DEODAR

Mooching into Man o War Bay on Sunday I spied the 52′ Deodar at anchor, looking very smart. She was built by Millar & Tunnage in 1960 & is an ex Auckland Police launch.
In 1996 she was converted for pleasure use & recently underwent further work – more details & photos here https://waitematawoodys.com/2013/12/29/deodar/

A Lap of Waiheke


rd-oct2016c

jonquil-little-o-oct2016a

w1-mow-labour-weekend2016

rd-oct2016a

A Lap of Waiheke

Over Labour weekend we did a lap of Waiheke Island in Raindance – bumped into a few classic’s, some will appear on ww in the next few days.
As we approached Oneroa mid afternoon on Saturday the weather was doing exactly as predicated  & the southerly was starting to pick up, coming around the point & it was blowing dogs off chains. Headed over to Little Oneroa & it was almost a mill pond, dropped the pick between James Mobberley (Moon Engines)  & Dan Ranell’s stunning N. Herreshoff designed yacht – Jonquil, pictured above with George Ranell ‘on watch’. Potentially it could have been a disaster i.e. 3 kids under 5 between the 2 boats – but good parenting saved the day. A few late afternoon coldies on Jame’s launch ‘Cartel’ was the perfect lead in to dinner – a wood fired pizza on the beach from the resident pizza caravan. Saturday was a cracker of a day on all fronts. Nice weather, people & boats.

For the first time (that I can remember) we had a peaceful night in Little Oneroa & woke to a stunning day (Sunday), one out of the bag. A quick breakfast ashore at ‘Wai’ & a few provisions from the ‘new’  store on the roundabout, called ‘The Island Grocer’ – its where the old general store (fruit & veg focus was) used to be. Less hairy armpits on display these days & a great hole in the wall coffee operation. Perfect spot to people watch.

Headed down the north side to the bottom end, very pleasant trip & a lot of people both fishing & catching fish. Mooched around a few bays & anchored in Man ‘o’ War Bay. The vineyard operation was a zoo with Island day trippers, so held off going ashore until late afternoon for a drink. Quiet night in the bay, except for 2 sets of very young children doing laps of the bay in dinghies with 2hp outboards – I do not lie when I say it went from 6pm to 10pm, if I had had a gun – I would have popped the tubes.

Slow start in the morning, had to wait for the tide, appears I had discovered a wee mud bank, never went a ground but I draw 2’3″ & the depth sounder was showing 0.700m (27.5″) 😦 So it was a leisurely breakfast 🙂 Th day was overcast & forecast to rain later on, so we headed home at lunch time. As we were leaving MoW, W1 was coming in – first time I had seen her ‘live’ on the water – way more narrow than I expected given her length, but still an impressive sight & a credit to the owner, who under took a lengthy restoration in his driveway in Herne Bay.
Saw Deodar (#1) in MoW looking very smart – photos tomorrow on ww.

A fantastic weekend, only takes a few days of good weather & one quickly forgets all the cursing & swearing over winter about bloody old wooden boats.

Below are a couple of photos from Rod Marler of the classic’s –  Arohanui, Trinidad, Lady Crossley & Nereides (looking none the worse for her oops at the Whangateau boat yard) at Kawau over the weekend. I hear the Kawau Boating Club was going off on Saturday night for the All Blacks v Aust rugby test.

Photo below of Wairangi at West Bay, Rakino Island on Sunday, taken by her owner & emailed in by Ken Ricketts.

wairangi-rakino-23-10-16

Mahanui Refit

img_0830

October 2016

screen-shot-2016-10-24-at-10-05-43-pm

Before

img_0833

October 2016

Mahanui Refit

Over winter Angus Rogers (CYA Launch Captain) booked Mahanui into Greg Lees yard at Sandspit for a wee facelift. Mahanui has been a frequent visitor to the surgeons – she was built by Keith Atkinson in 1977 & originally launched as Jacinta II. Eight years ago her then owner changed the name to Mahanui & converted the portofino stern topsides to conventional topsides and added a new duckboard. He also shortened the flying bridge coamings.
Angus purchased Mahanui in February 2012 & in May 2012 she went into Lees Boatyard at Sandspit for a 9 months total refurbishment that included new engines – full details can be found here  https://waitematawoodys.com/2013/05/10/mahanui-jacinta-ii/

This winter saw the canopy over Mahanui’s cockpit replaced with a permanent structure & the finished article is a perfect fit. But as I have said before, we expect nothing less from the team at Lees Boat Builders. Compare the first two photos above & I think you will agree. Below is a ‘as launched’ photo.

screen-shot-2016-10-24-at-10-05-17-pm

As launched

Kaheno

screen-shot-2016-10-20-at-11-37-55-pm

screen-shot-2016-10-20-at-11-45-03-pm

Kaheno Looking For A Cheap Waterfront Bach

This 45’9” 1966 classic trawler styled Carey motorboat is built using stripped planked kauri & powered by a 135hp Gardner 6LS engine. She was converted to a live-aboard & ticks all the boxes for what I call a floating bach.

Asking price on trademe is $249k, I suspect it will sell for less but what ever the price – it’s a cheap holiday home or a city waterfront apartment. Again thanks to Ian McDonald for sniffing this one out 🙂

Update from Ian McDonald
It would appear that the vessel is ‘Kaheno’ – desined by Carey of Picton & built in 1966 by Sinclair & Melbourne. She was once owned by the Salvation Army to service Rotoroa Island. She tragically sank with the loss of 4 lives in the Tamaki Strait circa 1986 whilst carrying timber as deck cargo from memory.

M.V. Cygnet

screen-shot-2016-10-20-at-9-10-08-pm

screen-shot-2016-10-20-at-9-10-30-pm
M.V. Cygnet – Looking for a woody lifestyle?

Cygnet was purpose built in 1913, as the original Cream Boat of the Mokau River.
After being fully restored in 1994, the Cygnet returned to its rightful place on the Mokau River; this time as the 2nd oldest passenger vessel in New Zealand. She measures 35′ & is powered by a 2012 Yanmar 30h.p. diesel. Most recently SGS (Safe Ship Management) inspected and certified in 2014 and still current.
The M.V Cygnet is currently on it’s newly built custom trailer being stored in a shed near the Mokau River (As it’s current owners are enjoying the benefits of retirement). This is a rare opportunity to purchase a piece of New Zealand maritime history & even earn a living.
photos ex trademe via advice from Ian McDonald

Do we know any more about her – builder etc?

Harold Kidd Input

She was built in Auckland and shipped down to Waitara for Sjolund of Mokau in July 1913, She was described as “on the tunnel style” 34ft in length, 7ft 6in in beam with a draft of 12 ins unloaded and 18ins with a two ton load. No hint of builder in that report but Baden thinks she is by T.M. Lane and Sons and that seems entirely likely. She was meant for the then flourishing Mokau River trade. Sjolund had several launches.

Ma Cherie

2016-04-06-18-25-45

2016-04-06-18-30-31

Ma Cherie (Adi Cherie)

Ma Cherie was built by the Lane Motor Boat Co in 1962 for L.G. Foster of 4 Awatere Road, Hamilton. She measured 50’/14’6″/4′ and was powered with twin Ford 6 cylinder diesels. Her name was changed to Adi Kuila but owner Markham Thomson has done the right thing & gone back to the original.
You can find more details & photos on her past here   https://waitematawoodys.com/2014/08/22/adi-kuila/

Ma Cherie has just seen a major re-fit that included fiberglassed topsides, rot removed / rebuilt, rewired, starting/charging system upgraded, new interior, engines head jobs & new water tanks. She is looking very smart, in fact she even gets away with the hothouse up top, just the right height.
Details ex Harold Kidd.

Tide Song

screen-shot-2016-10-19-at-9-26-47-pm

screen-shot-2016-10-19-at-9-27-55-pm

Tide Song

Built by Oliver & Gilpin c.1970, Tide Song is 48’ long & built with single plank kauri. Powered by the original 2 x 70hp Perkins marine diesels.

Over the last year she has under gone an extensive refurbishment that included – engines, hull, cabin, most of the mechanical bits & all the safety fruit.
Her owner says the refurbishment is 95% complete but due to poor health Tide Song is on the market.
A pretty boat, just a shame about the patio doors 😉  still a good wooden boat builder could correct that.
Thanks to Ian McDonald for the trademe tip off, Ian wondered if Tide Song is her original name & suggested she may possibly be a re-modeled Lady Tana.

So woodys – what do we know about her?

Update – Brian Worthington has advised that Tide Song was in fact Lady Lynn, photo below of Lady Lynn on launching day. He says she was built at the Oliver & Gilpin shed in the Wairoa River & there would have been input from Willy & John Oliver. Ted Gilpin owned her for a while & renamed her Tide Song from being Lady Sophia.

lady-lynn

Update 12-10-2020 The photo below of Tide Song (Lady Lyn) steaming in from Cape Brett was sent to me back in 2018 – opps that on slipped between the cracks 🙂

Sounds Ranger

2016_08_31_img_2067

Sounds Ranger

The above photo of Sounds Ranger was emailed to me by Frits Schouten & was taken by Frits in the Bay of Islands, sorry but that all I know.
I suspect the name  & style are a hint to her past

What do we know about her & her past?

Update 10-02-2022 – Photos below of Sound Ranger on the slip at Dargaville. ex Dave Stanaway

29-05-2024 UPDATE ex NORM JUDD



The following description by Kerry Johnson of the “Sounds Ranger.” is from the unpublished NZ NATIONAL PARKS AND RESERVES RANGERS’ ARCHIVE – a collection of written and taped memoirs of Lands and Survey rangers between 1952 and 1987. Kerry was Chief Ranger of the Marlborough Sounds Maritime Park from the 1968 to the 80s.

“Reading my note to Norm Judd, Havelock based ranger, re starting the Sounds Ranger brought back memories about those early days when I took over, among other things, the care and operation of the vessel. I wasn’t impressed with its overall condition. There was need to bring the launch up to Marine Department standards as soon as possible.
The problems included batteries not set up properly to provide backup if one set went flat, the stern tube the tail shaft went through contained a heavy oil for lubrication but would not function properly and no matter how much advice and effort I could muster this thick oil would ooze into the bilge. A few months down the track while cleaning the accumulation of grime from a circulating pump it literally fell apart. Thank goodness the boat was safely in her berth in Picton then!
Many improvements were eventually made but there was one incident that occurred one night when I think I was away. Late one rough, wet evening my wife received a call from the Harbour Board patrol to say the Sounds Ranger’s engine was chugging away in her berth with no sign of anyone on board and the doors securely locked! Now there has to be a logical explanation as to how this happened but I was never able to clearly identify the cause and that’s probably why the battery leads had been removed as mentioned in my note to Norm.
I’m not superstitious and while I learned later the same thing had happened once before, you can’t help thinking that there must have been some free spirit lurking about that stormy night and was about to take the “old girl” for a cruise in the gloom! “Stranger things have happened at sea.”
Thank you Norm for holding on to a note many (including myself) would have discarded long ago. As a friend commented recently when talking about recording family history, “even the milking cow’s name is important”.
Here’s the note
“Now a few directions in case you should be asked to take out the Sounds Ranger.
Batteries have been disconnected – under seat on starboard side, crescent spanner in tool box near batteries.
Before starting engine remove bucket from top of funnel – open hatch to engine room, light switch is on a beam just inside the hatch opening, that is if you stand on the engine room floor looking forward, the switch is on your right hand side on the back of the beam that forms the front section of the hatch opening. Move under the exhaust pipe along to the front port side of the motor. If you look around the actual front of the engine you will see a small wheel with finger grips around the outside (about 3” or 4” diam.)
This is the wheel that engages the bilge pump by simply screwing or rotating the wheel clockwise or in towards the engine. It should be in this position now, so to disengage the pump, just screw the wheel very slowly out. Do not on any account force the wheel too far out, or for that matter too hard in, otherwise it will stick hard. The pump has to be primed before it will start, this done on the starboard side of the engine. There is another light there with the switch by the light bulb, you will find an old kettle with water in it. You will see towards the front, a tap with an opening for the water to be poured in on the top. With the engine at low idling speed, turn the wing tap to vertical – pour water in slowly. I hold my thumb near the hole and when the pump looks like starting I block the hole with my thumb then turn the wing tap to horizontal.
To start the engine use the starter button on a beam in front of the light on the Port side of the motor, but you should only have to use this one when the engine is cold. It also pays to use the overload button on the fuel pump (when the machine is cold only) the button is on the front of the fuel pump.”
(Here there was a small diagram that showed the location of the overload button on the fuel pump.)
“Button should be pushed up, at the same time pull back the rack. Push the starter button until the engine starts.
Be sure to turn both lights out, on leaving the engine room.
To stop the motor just pull a string that hangs on a nail beside the top of the steps that lead into the forward cabin. Normal starting can be done by using the starter button by the compass. (This for some reason has given trouble in which case I have used the engine room button.)
Push throttle lever up to 1100RPM after about 20 minutes. I doubt whether it will be necessary for you to use the boat, and if you do, I don’t think the bilge will have to be pumped out. There is a hand pump in the engine room, the valve is on the side is off. If you have to use this rather that the pump on the motor please be sure to turn the wheel mentioned earlier to off position.
Remember that the motor is only 60 HP and will not pull up as quickly as the PR (Pelorus Ranger – Havelock based vessel) in other words take her quietly and don’t get into shallow water or you will get into trouble.
Hope this makes sense?”
“P.S. Key to door lock is under bucket by gas cylinder rear of wheelhouse.”

(All of this made sense but just being up with the detail didn’t necessarily mean I was any less concerned with the implementation! – Norm. My recollection is that SR drew about 6 feet and was 45 feet at the waterline.)

Unfinished Project

screen-shot-2016-10-16-at-2-07-16-pm

Unfinished Project – Yeah right

The above 33′ launch is located in Kerikeri & the trademe listing states that the owner auto bid on two boats & won both auctions & now this ones surplus to needs 🙂
There is no reserve & the opening bid is $1 so it could be a good buy for someone looking for a project. The seller states that the previous owner could finish her, on behalf, if a buyer was interested – all very confusing. Thanks to Ian McDonald for pointing out the listing on trademe.

Anyone know more about the vessel?

Two Mystery Launches

mystery1382a

mystery2383a

Two Mystery Launches

The above two photos were sent to me by Harold Kidd and according to the photo album, the photos  were taken at the same place around 1925-7.
The launch with the strange steering position is named Tuhoe, all Harold knows about her is that she was in Taurangs in the early 1920’s owned by a P Best.. She’s not very big, about 20ft, 22ft at a pinch.
The launch in the second photo doesn’t carry a name.

So woodys the question of the day is where are the photos taken and what do you know about the launches?. Harold thinks the location is Waikaremoana but doesn’t know that lake well enough to be sure.