King Orry

KING ORRY

For a plastic boat to appear on WW it has to be a tad special – the f/glass replica Logan33 launch – King Orry falls into that special category. In the past I have featured several of these boats and commented that they we years ahead of the trend and if still made today, there would be a ready market for them. They just tick so many boxes and also cater to the old salts that need to move on from their yacht, but still want a degree of stick and rag in their boating life.

There are a lot of ‘woody’ features on King Orry e.g. bronze fittings, timber bow rail, crafted t&g kauri interior, kauri mast with steadying sail etc. Like most of these launches the forward motion comes from a 40hp Lombardini engine, mounted very far forward, the drive shaft is almost as long as the boat. She has a cruising speed of 6-7 knots and tops out at 9 knots.Big (for her size) tanks (both water and fuel are 250L) give her a serious cruising range, I believe she sips 2L an hour.

The Origin of Callisto

Original interior
Original galley
Launch day – Waipu River

The Origin Of Callisto

Today woodys we get to go on a virtual trip back in time – to the early 1970’s and finish off in 2022.The hero of todays story is Callisto, the 50’ sport cruiser that Jack Barrott built in Waipu, Northland over 3 years in the late 1960’s > early 1970’s.
Firstly some background on Barrott – his family owned a saw mill and native forests in Northland (back in the days when you were allowed to do that). During this time the Ministry of Works had a wee problem – a giant kauri tree – named ‘Packwood’ was about to fall over and block the main road north, on the Brynderwyn Hills, so the decision was made to fell it – Barrott’s mill was the obvious choice. So this giant kauri and other trees from their private native forests provided the timber for the construction of Callisto.

In the early 1960’s well visiting the USA, Barrott came across the latest motorboat designs in Florida – known as Sportfishing boats – he liked what he saw and made a half-model and drawings, which he showed Whangarei boat builder Alan Orams, who then drew full plans and would help Barrott during the building process. The backbone and frames were in fact constructed at the Orams yard, then transported to Waipu for assembly in Barrott’s shed. Construction is very traditional, with kauri used for most of the structural members and exotic timbers else where. The 42’ keelson came from one solid kauri log, as did the floors, ribs, hull and deck beams.

The design of Callisto with its flybridge, as compared to the traditional sedan top launches of the time, was years ahead of the market and even today, 50 yrs later, she is still a looker amongst a marina of white plastic boats. Post launching Callisto spent approx. 15 years moored in and around Whangarei Harbour – her next owner was a Bob Doughty, who changed her name to – Challenger’ in c.1987. Fast forward to 2002 and she changed hands again – this time to Steve and Elizabeth Cowie – who quickly changed her name back to Callisto (fyi – Callisto is the 3rd moon of Jupiter). The Cowe’s undertook an extensive refit that included modernising her interior. A bonus was that Steve Cowie was fully expecting to have to remove the 30 yearly twin Caterpillar 3160 – 10.5L, 210hp, non-turbocharged engines, that had never had the heads off. When inspected by Cat technicians they were found to be in top condition and given a clean bill of health. In fact they remain in the boat today. Being semi-displacement Callisto cruises at 10>12 knots and tops out at 14. 

Callisto passed thru several sets of hands – the trial looks something like this (if I have it wrong, let me know) – Jack Barrott > Bob Doughty > Ken Carter > Steve Cowie > Kurt Settle and in 2018 ownership went to the 3 Forsyth brothers (Kent, Rhys and Tobias) and their families who share the use, costs and maintenance but mainly the love of being out on the water in Callisto, She gets used extensively around the gulf and most summers to the Bay of Islands but with more farther afield adventures definitely in the long term plans.

Callisto has just completed a 3 1/2 week full hull repaint in the shed Pine Harbour Boat painters, The result of the finish achieved being simply magnificent with the quality of workmanship second to none. Whilst in the shed the brothers made the most of things with an additional kauri knee fitted to the duck-board, teak cockpit re-caulk and tidy up and some new bronze rudders cast at the Foundry in Silverdale.
As I say often – some boats are lucky in they owners – Callisto is one of them 🙂

Do People Still Tune Into waitematawoodys Over The Holidays ?


Short answer – YES, in fact these holidays more than ever. On Jan 4th we hit a record for the highest number of individuals ever logging on in a 24hr period. Other than Xmas day, every day was bigger than the average (normal) daily viewing. Thanks for the support, seeing the above skyscapers makes the effort of doing a daily story worthwhile. Best Regards Alan Houghton 

A Story For The Engine Heads + Must Read Book

A STORY FOR THE ENGINE HEADS
Over the break two diehard woodys sent in some photos of what a lot of woody boaties consider to be the holy-grail to marine propulsion – Gardner engines.The top 3 photos shows classic yachty – David Glen standing alongside the Gardner 6L3 in the ex workboat – Faith. Link below to uncover more on her.  https://waitematawoodys.com/2019/04/06/faith-the-milford-slipway-opens/
In the second group of photos (ex Angus Rogers – MV Centaurus ) we see the Gardner 4LW in Dean Wright’s woody – Arethusa, nice wheelhouse too – again WW link below for an insight into the repower. Also lots more to read / view on Arethusa by using the WW search box. https://waitematawoodys.com/2017/12/31/restoring-installing-a-gardner-in-arethusa-revisited/

BOATS OF THE LAKE –  REVIEW  As most of you know, I’m a big fan of the annual Lake Rotoiti Classic & Wooden Boat Parade on Lake Rotoiti, North Island. During the recent CV-19 lock-downs past commodore David Wilson, his wife Glenys and member Lois Palmer teamed up to pull together a book detailing some of the history surrounding the LRC&WB association. The hard cover, 4 colour printed book is full of beautiful photos taken at events spanning the 25 years, plus many stories about locals and their boats around the lake. I tucked a copy away for Xmas / NY reading and if you have any interest in classic wooden boats, I give it a big tick and encourage you to buy a copy, details below. Link For Ordering https://form.jotform.com/213318234322849

Make sure to check in to WW tomorrow (Monday) we have a brilliant story on the woody – Callisto 

FLORENCE (Florence M – Carla Maria)

FLORENCE (Florence M < > Carla Maria)

The name Florence would have to been of the most popular launch names on WW, and now another has popped up on tme, thanks Ian McDonald for the heads up. This started life as a work boat , actually a cream boat i.e. a vessel that took the milk from farms to a dairy factory. When launched she was named – Carla Maria – more on her at the WW link below. https://waitematawoodys.com/2015/04/28/12377/ She is built from kauri planks and is 29’6” x 8’10” x 3’3” and powered by a Isuzu 60hp diesel engine.
From the photos she appears to be a very well fitted out woody – if you invested a few thousand dollars with a classic sympathetic boat builder and ‘lost’ the three ‘TV monitor’ windows from the cabin sides she could be a very smart classic launch. Currently on the dark side e.g. berthed on the Kaipara Harbour. 

Update 09-02-22 From Dave Stanaway – Photos below dated 20 April 2019 during Northern Wairoa Boating Club race day. 
Dave also commented that he reckons that the boxy shape of her cabin suits her age bracket rather than some slanty looking modern version. 


HELP WANTED Can anyone make a recommendation on where / who to go to, to restore a marine compass – the one below is crying out for some TLC

At What Number Do You Stop Being A Collector & Become A Hoarder? – Maru

At What Number Do You Stop Being A Collector & Become A Hoarder? – Maru
The fleet of classic vessels under the wing of Jason Prew grew over the weekend after a trip to Cooks Beach to extract the 24’ Mullet boat – Maru. Built be Clare and Collings, her sail number was #12. The clip below from the Boating NZ archives records how Mr Prew acquired the vessel.


What more do we know about her? 
Below is a selection of photos from the Boating NZ archives – read and see more here https://boatingnz.co.nz/maru-and-aucklands-24ft-mullet-boats-match-racing-the-mulletties/

Rambler

RAMBLER

The 24’ Lake Rotoiti based woody – Rambler was built by Joseph Anderson in the Big Omaha Valley near Matakana and launched in 1913. It took 3 years to build the boat and she was one of the first boats to be built with a kauri strip plank construction.   Rambler was used to travel to Auckland as it was easier by boat than by road. After returning from World War 1, George Anderson, Joseph’s son, used Rambler to travel to Kawau Island for cray fishing, trapping possums and hunting deer. These trips also became the delivery for mail and provisions to those living on Kawau.

In the mid 1930’s, Rambler was sold to the local cobbler in Matakana and the boat was used for fishing trips but later was left in the mud in a sorry state. In the 1970’s Rambler was sold and given a major refit including having a top cabin added.

Rambler was discovered in Howick in 2000 and was brought to Lake Rotoiti, Rotorua by her current owners, where she was refitted with a revamped interior, hand made cedar mast, bronze and brass fittings and a number of other improvements. Approx. 1990 her engine was changed from a petrol Chev 4 to a two cylinder 20hp Chinese diesel. This still goes but needs to be replaced. Amazingly Rambler has had only four owners in her 108 year old life, and now is on the market, awaiting her next custodian. Thanks to Ian McDonald for the tme heads up.

Rehia – Finds A New Home

REHIA – FINDS A NEW HOME

Very chuffed to advise that the 1939 Colin Wild designed and built launch – Rehia has found new owners after an extend spell on tme. Bought by a young family that have the desire and commitment to return her to her former glory. Which she deserves, being woody royalty i.e. ex the Colin Wild stable. When a boat survives 80+ years in almost original configuration, it tells you that the designer got it right.

WW will follow this one closely, being ‘nice people’ the first project was fitting a holding tank – had to cash a few credits in at The Slipway Milford to get the work done at short notice – thank you Mr Prew 🙂 Lots of past Rehia stories on WW, search her name in the WW Search Panel – for lots of photos.

24-02-2022 Input ex Scott Taylor – Scott sent in the sketch and photo below of his fathers (Mac Taylor) time spent on Rehia on boom patrol during the WWII, Mac drew the pencil sketch of which Scott has the original.

Hauiti

HAUITI

During the week Hugh Gladwell gave me the heads up on a woody project that was nearing completion. The ex navy 3-in-1 whaler, Hauiti, also known as a motor sea-boat, was built at the Naval Dockyard in 1962 out of double diagonal kauri. She has been converted by Peter Thompson (who was the project manager on the Jane Gifford restoration) to a river boat to operate in survey on the Mahurangi River. Hauiti is powered by an Elco electric motor which will run for about 7 hours and is charged by a bank of solar panels on the cabin top with no shore charging. Peter Sewell has designed the propellor.
Hugh commented that the river is now dredged along 3 quarters of its length to a depth of 1.5 metres at low water and they have about a year to go to complete the project. Once complete, the upper basin area  will be a great overnight cruising destination for swallow(ish) vessels. Watch this space for a woodys weekend cruise.

Looking For Santa Sack Fillers

For what seems a very long time (25 years in fact), Rotorua woody – Ronald Wattam has been beavering away pulling together a book on the boat building dynasty  – C.J.and A.J. Collings. Ron is linked via marriage to the family. The book covers the period 1896 > 1967. Yesterday a package arrived with some advance copies –  I am so manic on the work front I haven’t had a chance to read, but at 153 pages its a very extensive collection of photos, data and insights into 70 years of New Zealand maritime history. I have two copies to give away – the question is – approximately how many boats did the Collings & Bell company build?. All close answers will go into the draw for one of two copies. Entry is by email only to waitematawoodys@gmail.com closes 9pm 17-12-2021 If you miss the draw – copies are available at $55+p&p, direct from Ronald Watttam at olivine@xtra.co.nz

Minocquia – 50′ Halvorsen Motor Cruiser + CYA Marina POLL Results

50’ HALVORSEN MOTOR CRUISER – MINOCQUA Todays story from the Australian Wooden Boat Festival – ‘Folk Boat’ video series features the stunning Minocqua and her custodian, Andrew Cannon AM. The 50ft vessel was built and designed by Lars Halvorsen and Sons in 1947. The luxury motor cruiser is a great example of an early post World War II boat. She has now been berthed in Hobart for nearly 20 years and Andrew loves escaping his busy life, to spend time cruising the D’Entrecasteaux Channel on Minocqua. Sit back and watch the story above.

THANKS FOR VOTING


If you missed the results from Tuesdays POLL on the NZ Classic Yacht Association’s new Heritage Basin marina – its was a clear winner for the marina to be open to all CYA vessels, with 85% voting for this option. In comparison only 15% voted from it being used by YACHTS alone, via invitation, and these yachts would be pre WWII, NZ designed and built, and preferably gaff rigged, A Class vessels. You don’t have to be a rocket scientist to see what people with sawdust in their veins want. Over 1,000 votes received and the second highest day in terms of individual visitors to the WW site. Thank you again for all those that took the time to connect with the story. We will keep you posted.

Aquarius Is Back

AQUARIUS IS BACK 

The 1955, 38’ Supreme Craft built, ex game fishing classic launch Aquarius first appeared on WW back in Sept 2018, at the time she was hauled out on Waiheke Island and in a very sad state and we were reaching out to find a passionate woody that would take her under their wing – see that story here https://waitematawoodys.com/2018/09/01/aquarius-sos/ In April 2019 we reported that someone had stepped up to the mark and Aquarius was being transported back to the mainland and hopefully restored – see that story here  https://waitematawoodys.com/2019/04/16/aquarius-saved/ Then in June 2020 we got to have a gander at the scope of the project, lots of photos here https://waitematawoodys.com/2020/06/10/aquarius-restoration-update/

Now thanks to a tme listing we get a peek at the almost finished job, the listing tells us the interior need finishing and a final coat of paint to the exterior. I understand a lot of work has gone into the project – could be an easy entry into woody boating for someone prepared to roll their sleeves up.Her forward motion is via twin Ford 85hp diesel engines.  Below is a peek at her journey 🙂

UPDATE 22-12-21 – photos below from the past sent in by Shamus

30-10-2022 UPDATE – Recently popped up for sale on tme. Still a work-in-progree but some bling being assembled to go on her 🙂

RESULTS OF YESTERDAYS CYA HERITAGE BASIN POLL – 85% BACKING FOR OPEN TO ALL CYA VESSELS – Over 1000 votes cast. Very high number of individual people visiting the site yesterday, 2nd only to a Mahurangi Regatta weekend story. Thanks also to all the emails and calls – I understand peoples hesitancy to comment ‘publicly’ on the site 😉

I had an email from a long term CYA launch owner “Greetings Alan, In my anger I voted thumb down when I wanted to vote for all wooden boats in the marina. Anyway to change it?”