Four Winds

Screen Shot 2018-10-18 at 9.27.12 PM

C1975

Below Photos c1977

Screen Shot 2018-10-18 at 9.28.18 PM

Screen Shot 2018-10-18 at 9.28.29 PM

Screen Shot 2018-10-18 at 9.28.43 PM

FOUR WINDS

I was recently contacted by Stuart Windross in regard to the 30′ launch Four Winds, built c.1936 by Dick Lang. At the time Stuart promised to send in a selection of photos from the 1970’s, when they  owned her. I have to say I was blown over when I received the email – what an amazing history of the woody. Its a great tale – I’ll let Stuart tell it. Enjoy 🙂

My Mum and Dad and I  (Shirley and Alistair – now both decesased- and Stuart Windross) owned Four Winds from 1975 to 1979. We bought it in close to sinking condition from the previous owner who we understand had a very rough trip back from Barrier and pretty much walked off her.  There were dirty dishes in the sink and a healthy dose of mould on all surfaces when we purchased her.  There was water up to our knees in the forward cabin.  She was very close to both sinking and having water through the engine.  Luckily we got to her just in time.  When we towed her off her pile moorings in Panmure she left a health dust trail from nearly a metre of trailing mussels etc.  
Once restored she was a lovely sea worthy vessel with its original Dick Lang – built dinghy that fitted the davits exactly.  The Mk3 Ford Zodiac petrol engine (shudder) was reliable and cruised at 2000rpm at 2.5 gallons per hour.  The rumble of her exhaust was fairly noisy though!.
Her layout was original except for the galley and a superb use of space (see pics) with: 
  • copper fuel tank across the stern
  • helm to  port aft at the front end of a seat/locker (with its excellent horizontal wheel well placed to rest feet on when sitting on the hatch edge). The steering worked via the vertical shaft, heavy duty rack and pinion, and two rods connected by a idler quadrant in the aft quarter.
  • Galley with fridge and cooker starboard aft.  Remarkable were the ‘Rovers Return’ style hand pumps that supplied water to both the sink and the handbasin forward. They delivered a pint at a time as the brass and porcelain handle was pulled to 45 degrees. 
  • Saloon with full length berths/seating ea side that could be converted to bunks (canvas and steel pole to support the back squab). Forward of each bunk was a cupboard/locker. The starboard one was for crockery, etc with captain’s locker underneath. The port one housed exhaust, header tank, tools, spares etc. Water tanks were under the bunks. The decorative panels around the port holes in the cabin sides were a burgundy style textured type of linoleum in a pebble motif. The squabs initially had their soft brown leather covers but need replacing due to water and mould damage.
  • Engine forward centre in the saloon with tilt-up sides creating a table. The engine was a Lees Marine conversion cooled by both keel tubes and a large brass heat exchanger fed by a Jabsco sea water pump. The pulley for this was corroded away to shaft level when we got her indicating the level of the bilge water. The gearbox activated by a hefty lever at the helm was a 2:1 reduction ‘Paragon’. 
  • The forward cabin was separated by a sliding door forward of the engine and had full headroom for the first metre or so. It housed a double berth to port and a beautiful kauri dresser and wardrobe to starboard. The chrome fiddle rail can be seen in the pics. Under the berth were batteries, switchboard, and massive storage. A chart rack was above between the deck beams with a fascinating range of charts showing the Four Winds had travelled far afield in her heyday.
  • In the bow were an anchor locker aft of which was the heads (copper funnel with outlet to starboard – no holding tanks then) and a handbasin tucked port side (again with porcelain pint pump). Flush (and deck washdown via the overhead hatch) was by a water puppy pump and hose, very effective. The windlass was powered by what I believe was a Spitfire starter motor and a massive reduction box. I recall lifting the stern well clear of the water when trying to free a stuck anchor off the Needles in Onetangi. The head/basin was closed off from the other cabins by yet another Dick Lang masterpiece, a three panel folding kauri panel door similar to that between the cockpit and saloon.
  • The four large chromed ventilators (supplemented by a sliding window in the front of the tram-top, gave the vessel both good airflow and a classy look. The dodger on the rear cabintop was both a fine back rest for those topsides and great shelter from spray for the helmsman in heavier conditions. The flair on the bow was such that Four Winds was a very dry boat.
  • The original mast (which took a steadying sail) and railings added to its balanced look.
For a 30 footer she offered more usable and functional space than many much larger vessels..
We sold her pending my marriage in November 1979; house purchase beckoning.
We re-discovered her in the Weiti River about five years ago. Sadly she was minus her original dodger and railings (replaced by unflattering stainless ones) and was sporting ugly square windows cut into her cabin sides in place of her aft (saloon) portholes. She then appeared on trademe for sale and last time we checked was not visible at Stillwater.
No doubt she is still around and hopefully receiving the care and use she deserves.
Incidentally my Aunt (Valmai Windross – nee Strongman and brother of Merv) took me as a child to visit the elderly Dick Lang in Palm Beach Waiheke. He also built a 12 foot dinghy for my Grandad c1956 which the family used for many years at Onetangi and Howick.
I am happy to be contacted should you have any further questions.  Somewhere I have a log that covers off some of Maughan’s use of her.  If that would be useful I can hunt it out.
Regards Stuart Windross
I love these old sale & purchase agreement 🙂
Four Winds Sale Jordan to Maughan
14-08-2019 Update ex Stuart Windross – Stuart advised her current location is Ngunguru and he uncovered the photo below on line,  the photo is credited to a Arty Green, not sure if he is the owner or just the photographer.
Four Winds Ngunguru Harbour ctsy Arty Green

Lucinda 4sale

Screen Shot 2018-09-30 at 11.31.28 AM

Screen Shot 2018-09-30 at 11.34.48 AM

Screen Shot 2018-09-30 at 11.39.33 AM

Screen Shot 2018-09-30 at 11.38.52 AM

LUCINDA – 4sale

I have had a long vicarious association with Lucinda, myself & friends used to sit in the Devonport Yacht Club & look out at her moored in what appeared to be the main channel of Waitemata Harbour. I think we even took bets of how long before she sank, then one day Nathan Herbert rocks up, tracks down the owner & buys her. Her extraction & removal of her beard was covered off on WW her at the link below:

https://waitematawoodys.com/2014/03/11/lucinda/

Then she was towed to Milford Marina & hauled out for a 2+ years restoration (some photos from then included above). Nathan is an engineer & very fastidious so all the work was 120%. You can view her relaunch at the WW link below:

Lucinda Re-Launched

I do not normally do ‘long’ 4sale features on WW but (a) Nathan is a mate (b) Lucinda would have to be the best presented, best looking, value for money classic woody on the market. For $30k, you will be boating this coming weekend. And for the record, given the extent of the work done on her – I think Nathan is a little low on the asking price, it should be closer to $40k in my eyes.

And the question you are all most likely thinking – “Why is he selling?” – simple answer, he had the opportunity to purchase a classic woody that has been in his family for 100+ years, you don’t pass on something like that, so Nathan is back in the restoration mode.

My advice to anyone interested in her – buy her & quick, unlike most classic woodys, she will not be on the market for long.

Below is her story & details on the restoration project.

Lucinda was built in 1930 in Auckland by LC Coulthard and has a beautifully sound single skin Kauri hull with solid kauri cabin. With the help of classic boating experts, I completed a 2.5 year restoration/rebuild of her that saw her stripped back to bare hull and cabin sides, fully checked over and all other components rebuilt/replaced. Lucinda has covered over 1000 miles since relaunch in 2016. 

She is a good looker from every angle, is extremely roomy for her 27ft and uses very little fuel with her relatively modern diesel engine.

Lucinda is very seaworthy and with her high bow and V-bottom hull shape she barely rolls and rides over waves well. She is easy to manoeuvre and with her 2ft 6” draft it is easy to find safe anchorage close to shore!

All of Lucinda’s gear is built to last and top quality. 

Hull

Stripped bare inside and out and repainted in Altex system.

Kauri carvel construction with copper fasteners. 

Large pohutukawa knees throughout with extra large kauri knees in the bow area. 

All sawn frames re-fastened. 

Both bulkheads replaced, with extra sawn hardwood frames added in these areas. 

New solid Jarrah engine beds fitted.

All keel bolts replaced with large custom-made copper bolts.

Keel is solid kauri with no hogging.

Decks

Foredeck (bow area) stripped back to original laid kauri deck. Some planks replaced, then whole deck ply covered and fibre glassed over.

Side decks excellent condition kauri planked with solid pohutukawa belting. Stripped bare and laid over with new fibre glass.

Cockpit roof completely replaced with treated plywood and fibre glassed over. Other cabin roofs are sound, and fibre glassed already.

Cabin sides

Solid Kauri sides stripped bare inside and out and repainted in Altex system. Windows all removed and resealed with sikaflex.

Drivetrain

c.1990 Perkins Prima 50hp diesel rebuilt (new pistons, rebuilt block, crank, valvegear, head) by Taylor Automotive in 2017.

Borg Warner velvet drive 2:1 hydraulic transmission.

Solid bronze shaft. New custom- made 4 blade propeller to match.

Steering gear

New marine grade stainless steel rudder. Teleflex cable steering.

Solid bronze shoe from keel to rudder pintle

Practical and unobtrusive Garmin GPS/fishfinder etc.

Interior

All upholstery replaced, with double V-berth in bow and two singles in saloon area.

Sink and solid kauri bench / seating in cockpit. I have always used a portable gas stove and a portable compressor fridge for simplicity, which are not included in the sale.

Full headroom in the cockpit and bridge (very tall interior in bridge) and about 5’5” in saloon area. 

Marine toilet located underneath a lifting section of the for’d berth to starboard. 

General fittings

Solid bronze cleats, bow roller, electric anchor capstan etc etc. 

Manson Boss anchor with 16m chain, spliced to rope, very safe system.

Full-height varnished hardwood Samson post for anchoring. 

Oregon mast on bronze tabernacle.

Varnished hardwood grab rails.

Top quality fitted cockpit covers.

Automatic deluge-resistant ventilators on foredeck.

Varnished hardwood folding duckboard.Teak cockpit doors.

Electrical

All wiring replaced

High capacity deep cycle house battery with separate starting battery.

BEP switches with VSR, plus earth isolating switch. New alternator.

Auto bilge pump with small secondary pump if required.

All LED lights. Stereo with Bluetooth.

Watch Her Underway

And I’ll Finish On Some Plastic Boat Humour (sort of) down By The Boat Show  – not sure what happened but looks expensive.

Screen Shot 2018-09-30 at 9.15.04 PM

Screen Shot 2018-09-30 at 9.15.22 PM

And the other side – ouch 

IMG_2292

And Now On Film

Wairuna

DSC05202

WAIRUNA

Anyone looking for a low entry cost woody project?
I have been contacted by Phil Gilbert concerning Wairuna a 28’, c.1938-40 Bailey and Lowe launch.
Wairuna has had one owner for the last 30 years, who sadly is now deceased, & the vessel has been sitting on a mooring at Tryphena for a bit.
She is now in Westhaven & will go on trademe next week with a reserve of $500 unless a keen woody wants a bargain.
She is powered by a 90hp Ford diesel, including hyd box.
The hull has been re ribbed, and appears in good nick, no visible electrolysis, top is glassed, original foredeck under the ply and glass. Hull extended
under boarding platform, bigger fuel tanks, no water tanks, and galley has been removed as it has only been used as a day boat for many years.
To quote Phil ‘her bones are great, but the makeup has run a bit’ – all offers considered.
Would be great if we could find a new home & return her to Auckland’s classic woody fleet – or even Lake Rotoiti 🙂
Contact Phil at.   phil@gilbertmarine.co.nz

Wooden Boating VIP On The Waitemata

Wooden Boating VIP On The Waitemata

Today I hosted Ben Mendlowitz on Raindance, Ben is the number one wooden boat photographer in the world & shoots for just about every boating magazine there is & produces the world famous “Calendar of WoodenBoats’ + has authored dozens of books on the subject.
While in New Zealand Ben was keen to photograph some of our classic fleet, so we headed out yesterday to catch the classic division of the RNZYS Winter Series race.
Ben will have some stunning photos, I was just the driver today so only took a few, very average photos – I did however capture 2 rare events:
1. Thelma going a ground off Stanley Point – some very red faces
2. Jason Prew venturing forward of the mast on Rawene – he didn’t look comfortable 🙂
Photos below – enjoy
THE NEW ZEALAND SAILING DINGHY EXHIBITION
In case you missed it – in 2 weeks (Oct 5>7th) is the annual Classic Yacht & Launch Exhibition at the Viaduct – this year the theme is ‘The New Zealand Sailing Dinghy’ – I’ll post more on the event during the week – but right now Tony Stevenson is doing a call out to anybody interested in displaying their classic NZ designed and built sailing dinghy, yacht class information or memorabilia.
Please contact Tony Stevenson tonys@nwv.co.nz  or 021 977 456
Screen Shot 2018-09-22 at 6.44.08 PM

Ark & Oi

41229922_2162714717384058_5747079344887431168_n

ARK and OI

Today’s photo ex Lew Redwood’s fb shows two woodys alongside the boat sheds at Wiahopo in the Far North. Wiahopo is situated at the upper reaches of the Houhora Harbour & was a big kauri gum field area.
The photo is tagged 1910-39 & attributes ownership as ‘Nortwood’s Ark & Harold Wagener’s Oi.
Harold Kidd Input – Don’t know about ARK but she’s obviously a small square bilge scow. OI is actually the cargo launch OEI, built for H.B. Wagener of Pukenui by T.M. Lane & Sons at Mechanics Bay (NOT Totara North) in 1910. She was fitted with a 7hp Standard engine (hardly zoom zoom). Dims were 36’6″x10’x2’8″. Arthur Subritzky delivered her north in November 1910 taking 25 hours Auckland-Mangonui.

PILAR – A Woody On Tour

DSC01763

DSC01761

DSC01774

PILAR – A Woody On Tour

A little while ago woody Rod Marler was in Cuba, while there he visited the Ernest Hemingway museum & photographed –  ‘Pilar’, Hemingway’s 38’ sport fisher. Built by the Wheeler Boatyard, Brooklyn New York and launched in 1934.

Below is a great read on the history of the boat, published courtesy of the Hemingway Home website, as are the b/w photos below.
“Returning to Key West from an African safari in 1934, Ernest Hemingway stopped off in New York to take a few meetings. At one with the editor of Esquire, Arnold Gingrich, Hemingway was given a $3300 advance for some short stories. He promptly took himself out to Coney Island to the Wheeler Shipyard and used the cash as down payment on a customized yacht.
Wheeler was known and rewarded for producing exceptional hand-crafted wooden boats. It had begun producing a pleasure yacht called the Playmate in 1920 and been very successful (the model would be produced until 1939.) Hemingway’s modifications to the 38-foot version he ordered included a live fish well and a wooden roller spanning the transom to aid in hauling fish aboard. He also requested extra large fuel tanks so he could stay at sea for longer periods of time. The boat had two motors – a 75hp for traveling and a 40hp for trolling. And he requested a flying bridge. The photo above shows Hemingway atop that flying bridge as Pilar pulls out of Havana harbor.
The finished yacht cost $7500 and was brought to Key West and christened Pilar. (Not only the name of the heroine in For Whom the Bell Tolls, Pilar is also the nickname for then-wife Pauline.) Through Key West friend and hardware store owner, Charles Thompson, Hemingway gained permission to dock her at the Navy Yard (the Navy was barely using it at the time.) This put the ship at dock only a few blocks from Hemingway’s home on Whitehead Street.
In 1940, when Ernest and Pauline divorced and he subsequently married Martha Gelhorn (whom he’d met at Sloppy Joe’s,) they relocated to Cuba and bought Finca Vigia (Lookout Farm) the home on a hilltop overlooking Havana. Pilar was docked at Cojimar, a small fishing village east of Havana, which was the inspiration for Ernest Hemingway’s The Old Man and the Sea.
When he left Cuba in 1960 with fourth wife, Mary he knew he’d be back. But the Bay of Pigs invasion in 1961 cut off his return and separated him from his beloved Pilar. After Hemingway’s death in July of that year, his widow gave the ship to Gregorio Fuentes who had served as her captain. Fuentes also served as the basis for the character Santiago, in The Old Man and The Sea and passed away in 2002 at the age of 104.
Today, Finca Vigia is a museum where Pilar is on display atop the tennis courts with a walkway encircling her so visitors can view the interior.”

Kaiurunga

Screen Shot 2018-08-28 at 4.58.16 pm

Screen Shot 2018-08-28 at 4.59.48 pm

KAIURUNGA – Workboat Wednesday

Kaiurunga is a double ender solid kauri planked launch at 41′ long & built in 1935 by Ernie Lane.

She is an ex-Westport Harbour Board pilot boat. The name Kaiurunga means ‘highest cloud’.  

Rumour has it she has done a lap of New Zealand and often crossed the Cook Straight.  

Zoom zoom is via a 95hp Perkin diesel motor that has her cruising at around 7 knots.  

Her trademe listing (thanks Ian McDonald) tells us her current owner has had her for a year and is unable to finish the project.  While looking a little ‘work-in-progress’ there has been a lot of time & money spent on her & she would make a good low cost live aboard / tiny house-boat.
Home port is Mana, Wellington.

Ti Point Wharf Waitangi Day 1934

18055856_1832098893778977_111186317362448805_o

IMG_2881

Ti Point Wharf Waitangi Day 1934 + Win A WW T-shirt

This is one of my favourite photos, it shows a great mix of launch styles & sizes, all coming together alongside the Ti Point Wharf, for a Waitangi Day celebration on 10-02-1934.
The photo comes to us ex Old North Auckland / Northland fb via Lew Redwood.
I included a recent photo I took of the same view, taken from the hilltop property of a woody, looking down on the wharf area.
I’ll give away a WW t-shirt (see below) to the woody that can ID the most launches in the photo – Nathan Herbert will be the judge of the winner.
All entries via email to waitematawoodys@gmail.com. Entries close at 8.00pm today (24-08-2018)
Input from Hugh Gladwell – “I don’t think that’s Ti Point. The tide goes in and out at 3 knots through the channel,the headland to the right is out of place and there is no sandy beach on the Ti Point side”
LR2016 ww shirts CM

 

Restoration of the 1936 X-Class dinghy Huia – X22

Screen Shot 2018-08-17 at 4.03.34 PM

Restoration of the 1936 X-Class dinghy Huia – X22

 
I have been contacted by Charles Pope who has begun work on the restoration of Huia. Charles is aiming to have the boat on the water in January at the Mahurangi regatta.
Huia has impeccable pedigree having won the Sanders Cup in 1939.
I have reproduced what Charles knows below. Charles is hoping to fill in the missing information between her Sanders Cup success in 1939 and the recent history I got from her previous owner, Rex, who sailed her at Mahurangi around 1998.That’s nearly 60 years missing
 

The photos above show her on the water in Torbay after Charles tightened up her planks and gave her a paint job. 

 
Any woodys able to help Charles out? I’m a little concerned use of the words – epoxy & glass fibre……………….
 
“Last year I spotted an old 1936 classic wooden boat for sale. Her name was Huia and she was one of the original X-Class dinghies that were sailed by very competitive teams vying for the Sanders Cup in the 1930’s. Huia and her Canterbury crew won the cup in 1939. 
 
Now she was on a rotting and rusting trailer, not under cover, damage from rain water and rotting leaves and badly in need of TLC. She needed someone with more passion than sense to save her from the landfill and that’s where I came in. I took her home, fixed her trailer and began the journey to get her back on the water. 
 
First I had to learn about clinker (or lapstrake) boat construction and I procured copper nails and roves and suitable pieces of kauri timber to match her original construction. After months of working every weekend I was ready to launch her on the local beach. It only took a couple of hours sailing her for me to see that Huia was a beautiful boat. Stable and forgiving, well balanced and stately in appearance – despite sails that had seen better days and gushing leaks between the planks that kept the bailing bucket busy, she was worth spending more time and money on to get her into top shape for a new life. 

I decided to bite the bullet and apply modern technology to give the old girl a new life. West Systems epoxy and glass fibre cloth will seal and protect the old kauri planks and some rigid framing will strengthen the structure so the epoxy won’t crack.”
And as a bonus, below, a mystery yacht, ex Ross Griffin’s post on Historic BOL photos page
32186506_10155649722040669_3757737256014577664_o
Input from Robin Elliott

“The Canterbury Huia was built by R. Tredennick in 1932, probably off moulds by Fred Dobby. She did little of note until Trdennick sold her around 1936 to R. Hendry and, with Fred Tissiman as skipper she won the 1939 Sander Cup at Bluff.

After 1939 she was sold to Bill Poole of Akaroa and he still owned her in 1947 racing with the Akaroa Sailing Club. My Canterbury contacts seem to recall that she was converted to a runabout.

However …. way up in Northland in 1952 an X-class boat named Huia owned by K. Bradley from Dargaville appeared at Paihia to race in the Northland Sanders Cup Trials. She was quite good and raced in Whangarei and at the northern regional regattas for the next 2-3 years. I have not seen any photos to see if she carried a sail number. Many regional yacht owners bought sails but never bothered registering.
Sea Spray Oct 1953, in mentioning the 1953 Northland trials, made a note that “Huia from Dargaville will be worth watching.”

At the Whangarei Cruising Club the X-class Huia won the Wilkinson Shield in 1953 and 1954.

Interestingly enough. The ex-Auckland yacht Tuoma (built for Bob Greenwell in 1946) in April 1952 was owned by R. Long of Taumarere, was racing at the Northland Inter-Port Yachting regatta up at Paihia.

Her sail number was X-22. She vanished soon after that 1952 regatta.

Perhaps Mr. Bradley of Dargaville got hold of Tuoma’s sails? OR… perhaps he bought Tuoma and renamed her Huia?”

Te Kowhai

Te Kowhai

TE KOWHAI

Todays story features the game boat Te Kowhai coming in to the wharf at Russell to weigh their catch.
The photo comes to use from Lew Redwood via ‘BOI Historical Photos’
Can anyone tell us more about the boat & what became of her – she is a very pretty launch.
09-04-2020 Input from Hylton Edmonds -Te Kowhai was one of the lessor known game boats operating in the Bay of Islands (based in Russell) around the time of the 60’s. As the advertisement below, from the 1963-64 BOISFC Yearbook, shows, Des Neal ran it for a partnership based in Hawera, a vague memory is that they were chartered accountants?

I have no idea what became of her, and compared to the other game boats, I do not think she was “on the scene” for that long.

Hopefully info will come to light on what was ostensibly a Bridge Decker (similar to Pirate) in survey, and put to work.

Screen Shot 2020-04-09 at 11.22.37 AM

Harold Kidd has previously commented that she was designed and built by J.G. Cox with a 6-95 Lycoming for Fred Reynolds in 1939. In NAPS in 1943 as Z42.

 

Regards,

Hylton