Lucinda 4sale

Screen Shot 2018-09-30 at 11.31.28 AM

Screen Shot 2018-09-30 at 11.34.48 AM

Screen Shot 2018-09-30 at 11.39.33 AM

Screen Shot 2018-09-30 at 11.38.52 AM

LUCINDA – 4sale

I have had a long vicarious association with Lucinda, myself & friends used to sit in the Devonport Yacht Club & look out at her moored in what appeared to be the main channel of Waitemata Harbour. I think we even took bets of how long before she sank, then one day Nathan Herbert rocks up, tracks down the owner & buys her. Her extraction & removal of her beard was covered off on WW her at the link below:

https://waitematawoodys.com/2014/03/11/lucinda/

Then she was towed to Milford Marina & hauled out for a 2+ years restoration (some photos from then included above). Nathan is an engineer & very fastidious so all the work was 120%. You can view her relaunch at the WW link below:

https://waitematawoodys.com/2016/08/29/lucinda-re-launched/

I do not normally do ‘long’ 4sale features on WW but (a) Nathan is a mate (b) Lucinda would have to be the best presented, best looking, value for money classic woody on the market. For $30k, you will be boating this coming weekend. And for the record, given the extent of the work done on her – I think Nathan is a little low on the asking price, it should be closer to $40k in my eyes.

And the question you are all most likely thinking – “Why is he selling?” – simple answer, he had the opportunity to purchase a classic woody that has been in his family for 100+ years, you don’t pass on something like that, so Nathan is back in the restoration mode.

My advice to anyone interested in her – buy her & quick, unlike most classic woodys, she will not be on the market for long.

Below is her story & details on the restoration project.

Lucinda was built in 1930 in Auckland by LC Coulthard and has a beautifully sound single skin Kauri hull with solid kauri cabin. With the help of classic boating experts, I completed a 2.5 year restoration/rebuild of her that saw her stripped back to bare hull and cabin sides, fully checked over and all other components rebuilt/replaced. Lucinda has covered over 1000 miles since relaunch in 2016. 

She is a good looker from every angle, is extremely roomy for her 27ft and uses very little fuel with her relatively modern diesel engine.

Lucinda is very seaworthy and with her high bow and V-bottom hull shape she barely rolls and rides over waves well. She is easy to manoeuvre and with her 2ft 6” draft it is easy to find safe anchorage close to shore!

All of Lucinda’s gear is built to last and top quality. 

Hull

Stripped bare inside and out and repainted in Altex system.

Kauri carvel construction with copper fasteners. 

Large pohutukawa knees throughout with extra large kauri knees in the bow area. 

All sawn frames re-fastened. 

Both bulkheads replaced, with extra sawn hardwood frames added in these areas. 

New solid Jarrah engine beds fitted.

All keel bolts replaced with large custom-made copper bolts.

Keel is solid kauri with no hogging.

Decks

Foredeck (bow area) stripped back to original laid kauri deck. Some planks replaced, then whole deck ply covered and fibre glassed over.

Side decks excellent condition kauri planked with solid pohutukawa belting. Stripped bare and laid over with new fibre glass.

Cockpit roof completely replaced with treated plywood and fibre glassed over. Other cabin roofs are sound, and fibre glassed already.

Cabin sides

Solid Kauri sides stripped bare inside and out and repainted in Altex system. Windows all removed and resealed with sikaflex.

Drivetrain

c.1990 Perkins Prima 50hp diesel rebuilt (new pistons, rebuilt block, crank, valvegear, head) by Taylor Automotive in 2017.

Borg Warner velvet drive 2:1 hydraulic transmission.

Solid bronze shaft. New custom- made 4 blade propeller to match.

Steering gear

New marine grade stainless steel rudder. Teleflex cable steering.

Solid bronze shoe from keel to rudder pintle

Practical and unobtrusive Garmin GPS/fishfinder etc.

Interior

All upholstery replaced, with double V-berth in bow and two singles in saloon area.

Sink and solid kauri bench / seating in cockpit. I have always used a portable gas stove and a portable compressor fridge for simplicity, which are not included in the sale.

Full headroom in the cockpit and bridge (very tall interior in bridge) and about 5’5” in saloon area. 

Marine toilet located underneath a lifting section of the for’d berth to starboard. 

General fittings

Solid bronze cleats, bow roller, electric anchor capstan etc etc. 

Manson Boss anchor with 16m chain, spliced to rope, very safe system.

Full-height varnished hardwood Samson post for anchoring. 

Oregon mast on bronze tabernacle.

Varnished hardwood grab rails.

Top quality fitted cockpit covers.

Automatic deluge-resistant ventilators on foredeck.

Varnished hardwood folding duckboard.Teak cockpit doors.

Electrical

All wiring replaced

High capacity deep cycle house battery with separate starting battery.

BEP switches with VSR, plus earth isolating switch. New alternator.

Auto bilge pump with small secondary pump if required.

All LED lights. Stereo with Bluetooth.

Watch Her Underway

And I’ll Finish On Some Plastic Boat Humour (sort of) down By The Boat Show  – not sure what happened but looks expensive.

Screen Shot 2018-09-30 at 9.15.04 PM

Screen Shot 2018-09-30 at 9.15.22 PM

And the other side – ouch 

IMG_2292

And Now On Film

6 thoughts on “Lucinda 4sale

  1. Pingback: Around The Yards – The Slipway Milford | waitematawoodys.com #1 for classic wooden boat stories, info, advice & news – updated daily

  2. Regarding the viaduct collision do Maritime NZ get involved or insurance companies apportion blame

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s