Todays story has 2 parts – the first being a link to a brilliant article that appeared in the UK Classic Boat magazine on Uffa Fox, from the pen of Barry Pickthall. Pickthall reflects on the legacy of the designer, sailor and the man himself. Its a good read, I enjoyed it, I hope you do as well. Click below to read.
AUSTRALIAN WOOD BOAT FESTIVAL – BOAT FOLK VIDEO SERIES – Terra Lina
Another short video from the team at the AWBF – this time focusing on Terra Linna, the oldest surviving yacht built in Tasmania, but there is degree of ‘granddads axe to that claim 😉
Recently WW was contacted by Ron Hackett regarding a project that has had an incubation period of 64 years, its good read so I’ll let Ron tell the story. But to give you a heads up Ron is looking for a custodian to take on the project.
BOUNTY – 34’ sail boat in frame.
“In 1958, a Kauri log was purchased by a young apprentice joiner, named Maurice Fleming. His dream was finally coming true! He started a notebook, and carefully recorded his purchases. The log, from Waihou valley, near Kaikohe, cost 338 pounds. It was railed from there to Whau Valley, Whangarei, and that cost 24 pounds, 10 shillings. [The mill there was Parkers, and sawing the log cost 56 pounds, six shillings and sixpence, producing 5,268 super feet of first class heart kauri.
Maurice continued to work for his father as a joiner, and set up the vessel at his home, working on it as he could. The designer of the ‘Bounty’, Ken Low, was keen to help as well. Ken was a well known boat builder in Whangarei, and with his brother Ron, owned the Low Bros Boatyard in Ewing Rd. Ken had learned his trade with Bailey & Lowe in Auckland. Ron did mainly the engineering side of the business, and another brother, Norman (known as Nip), was a tug-master in New Plymouth and Auckland.
In Te Puna Inlet, Bay of Islands, there lives a vessel built by Bailey and Lowe, in 1911, ‘Waitemata’, a 55’ pilot launch for the Waitemata Harbour. The construction of the Bounty is the same as that used in Waitemata, so it’s clear that Ken designed the ‘Bounty’ to be built with the same methods he had learned at Bailey and Low – three skins on stringers, two diagonals and one fore and aft, plus a sawn bilge shelf. Ken was well known for designing well-balanced, sea-kindly boats. People who knew him had great respect for his skills in designing and building, and many considered him to be one of the best wooden boat builders this country has seen. Ken also designed the sail plan for the ‘Bounty’, as a fractional rig. He knew what would suit ‘Bounty’ best, and it has been said that the sail plan was ahead of it’s time. Ken was a perfectionist. Maurice was working under Ken’s guidance, who helped when he could. Maurice’s standards were also very high, anyone building their dream boat will understand! He wasn’t happy with the first pouring of the keel, and set about doing it a second time, and it came out perfect. The keel is about four and a half Ton. The backbone and floors are all fastened with bronze bolts, floors being 2” thick. There are two bulkheads, and a number of moulds, with the stringers let into the bulkheads, all being perfectly fair. Breast hook and quarter knees are grown pohutakawa, and the beams are fitted.
Unfortunately, Maurice had a major setback of a personal nature. He seemed to go into a depression which he never really recovered from. He hung up his tools, and all work on the ‘Bounty’ stopped. Eventually, when Maurice was ‘getting on’ and was in a retirement home, it was time to tidy up his affairs.
I bought the vessel and timber about 1997 for $27,000, fully intending to complete her, but I have had too many other projects on.
The ‘Bounty’ is a 34’ vessel, at present in frame. All of the Kauri planking milled in 1958 is available. The fore and aft planks are full length, all planking is machined, and the rabbits are all cut.There are a couple of teak planks for cabin coamings.
I feel this vessel is an important part of our history. Aspiring wooden boat builders, of whom there are currently very few, could be encouraged to study the construction and fine workmanship, and even to work on the vessel. Today it’s a rare thing to smell heart kauri in a steam box. Budding boat builders don’t have many opportunities to work on such a vessel.”
Todays a shout out to anyone that is this person or knows someone that is – looking for a work-life change. If you have a CV you’re probably not who we are looking for 🙂
In no particular order does this sound like you –
• Good practical hands on general skills
• Not afraid to roll your sleeves up and just get the job done
• Sense of humour
• Looking for full time / part time / flexible hours
• Age open – young > old, its all about attitude
We offer –
• Small passionate team
• Central Auckland location
• Working railway slip – one of few left in Auckland
Todays story comes to us from retired boat builder Allan Hooper, just back from an extended trip to visit family the USA (Carlsbad just north of San Diego). I’ll let Allan tell the story :-
Prior to leaving I made contact with Morgan Spriggs the current owner of Lola, an NZ37. Lola was built at Jim Young’s NZ Yachts in 1969-70 while I was the foreman.
I was very keen to see the boat after all these years. Morgan has spent a lot of time restoring Lola and she looks as good as the date she left the factory apart from a few alterations and replacements. Morgan was excited to meet me and be able to talk about the build of the boat.
The hull construction is 4 skins of 1/4’” Kauri cold moulded with all of the back bone, floors, transom and bulkhead boundarys set in the mould. The hull was sheathed in Epoxy and glass. After the hull was taken off the mould the bulkheads and the interior were put in place and gunwales fitted.
The cabin, cockpit and decks were built on a separate mould complete with paint work, glazing and hardware. Then in an operation taking only a couple of hours, was lifted and placed on the hull, located over the bulkheads, glued and fastened down.
The techniques developed to build these yachts enabled a NZ37 to be built from start to finish in 4 weeks.
Morgan‘s father Robert owns a beautiful picnic boat, Easterly (photos below), an ex Maine lobster boat on which we toured the San Diego bay.
It was used by Denis Connor is a chase boat when he was sailing in the Americas cup. Robert Spriggs has owns the boat for 22 years and it is in as new condition, you could have eaten your lunch of the engine or engine room floor.
The teak cockpit sole is the best laid teak I have ever seen, the timber selected is absolutely perfect, as was the whole boat.
The waterfront at downtown San Diego has a beautiful collection of maritime exhibits including a sailing immigrant ship the “Star of India” which was a regular visitor to New Zealand in the 1800s, once a year it is taken out for a sail.
Further along the waterfront is the USS Midway launched in 1945, she was finally laid up in the 1990s. If you’ve never been on an aircraft carrier it’s well worth a visit. 3.5 acres of 3 inch thick steel makes up the flight deck. It is an interesting harbour to visit and extremely busy as it is alongside the international airport, a military airport, a naval base, several marinas and the city. When you go out on the bay you see it and hear it all.
Our friends across the ditch in Tasmania that pull together the Australian Wooden Boat Festival, commission some wonderful short films that provide an insight into the people and vessels that help make the AWBF so special.
We have featured several in the past and todays one is just such a cool, warm, feel good story. We meet Matt and Iefke – a young couple that were drawn together by a shared passion for wooden boats and are now building the boat of their dreams – Tarkine.
Both Matt and Iefke take us on the journey of how they meet, and express in words the reason why we do what we do and why we love wooden boats.
If today is anything weather wise like yesterday – find that spot x in the house and sit back and enjoy this short film.
Very sad photo above of the 1958, 34’ Brin Wilson built launch Parma that sunk today near / under the Auckland Harbour Bridge. Cause of sinking unknown, it was a beautiful flat day on the harbour, a witnesses said she just starting sinking before their eyes. At this stage unable to comment on the condition of those onboard or whether she can be salvaged.
08-08-2022 UPDATE – dockside chat reports that Parma was refloated and currently hauled out at Westpark (Hobsonville Marina). ‘Probable’ cause of the sinking – not using the center span under the Auckland Harbour bridge and taking the gap between last upright and Northcote Point – lots of man-made bricks there – refer photos below
The answer to the above question is – YACHTS ONLY IN HERITAGE BASIN
This was confirmed at last nights Classic Yacht Association AGM.
At the 2021 AGM Chad Thomson told the meeting in regard to the new Heritage Basin marina – “the intention was to have NZ designed yachts and launches that fitted the dimensional requirements included”
Well in the last 12 months that has now changed to yachts only, that fit a very tight brief – and we are told that this request came from Panuku and the Maritime Museum – yeah right.
So if you own a classic launch, classic cruising yacht, B Class classic yacht or a classic work boat – you are effectively a second class citizen i.e. not accorded a fair share of respect, recognition, or consideration.
Always an amazing collection of traditional craft on display at the Thames Traditional Boat Festival, from the electric Slipper launches to a fleet of Little Ships of Dunkirk.
Today we have David from the blog – Cruising the Cut, taking us on a tour of the festival at Henley-on-Thames. Enjoy Thanks to Colin Pawson for the link
THE NZ CLASSIC YACHT ASSOCIATION – IT’S NOT JUST ME – The WW comment below is from someone that should/ could have been one of the next generation of CYA leading lights – sub 50 in age and very talented and most importantly – a seriously good guy – BUT – LOST
“I started to write a long comment about this and gave up. I withdrew my 10+ year CYA membership in protest last year and my 2 other family members will be following as none of our boats qualify and because of the way applications (invites) have been handled.
Unfortunately this means I won’t have an opportunity to comment, listen or vote on something that has forced a large number away from the CYA.
The vessels at heritage landing have reaped benefit for many years – many hardly getting any use. When previous sub-committee members suggest a change or review of criteria – they end up giving up and resigning due to the way things are handled.
No transparency, nepotism and a committee that rolls over too easily despite nervously agreeing off record that it’s a farce.”
HEADS-UP CLASSIC LAUNCH, WORK BOAT & CRUISING YACHT OWNERS (shared with the entire WW community as it should be of interest to all)
Next Tuesday (2nd August) the Classic Yacht Association of NZ will hold its 2022 AGM – 7pm @ RNZYS
On the meeting agenda the only item under general business is ‘Report on the status of the expanded classic vessel marina / dock’, while on face value this might be seen as a positive sign – it will not be – let me give my view of the probable gist of the report.
1. Given the agenda item is after the election of a new committee – the previous committee will have already pushed flush on this e.g. ‘’it will be up to the incoming committee to…….”
2. The report should be dubbed the toffee apple report i.e. it will have layers of sugar coating on / around it
3. The report will be a test of the genuiness (I made that word up as I need to be careful what I say) of the situation i.e. what’s not said rather than what is.
4. There will be mention around everything still in negotiations etc etc but the reality is that a small group of CYA members have been working on a new waterfront marina for the exclusive, long term use of classic yachts i.e. primarily A Class, ideally gaff rigged. This goes against what has been ’shared’ with the other stake holders (Panuku and Maritime Museum) – fyi one of positives of living in an open society is that almost anything tabled in / around the Auckland Council can be viewed – below is taken from a report published in a late 2021.
5. The new Heritage Basin discussion will be verbally rolled into an umbrella waterfront discussion – that we will be told will cover all classic vessels – I’m only interested in the Heritage Basin area – what should be New Zealand’s waterfront home of our vibrant , traditional classic wooden boating movement. The real loser in all this is the New Zealand public who will miss the opportunity to experience our classic boating heritage. Instead they will see a classic yacht ‘car’ park.
IF THE FUTURE OF NZ’s TRADITIONAL MARITIME MOVEMENT / FLEET INTERESTS YOU (and you’re a CYA member) PLEASE COME ALONG NEXT TUESDAY AND WITNESS WHAT WE WILL BE TOLD.
SIDE ISSUE – I believe there won’t even be a need to vote on the election of a new committee – there are only enough people standing to fill the available positions. A little sad that the role/s have so little appeal. Personally I think it Is actually a strategy to keep the fiefdom functioning.
RELAX – There is always a woody story
Today’s woody is Delmar, that when I first got involved in the classic boating movement was very much on the scene and participated in some of launch events.
While mooching around East Tamaki last week I spotted Delmar fresh from a visit to the beauty parlour – looking very smart.
Not a woody and not a boat but after yesterdays weather it seems very fitting for a story 🙂 Amazingly the story of this Marton, Manawatu NZ Airbnb popped up in the Financial Times (FT) Weekend Magazine. Sleeps 4 and has a very nautical fit out.
Link below if your in the area and looking for somewhere to stay…….
WOODY CLASSIC BOATING 2022 – 2023 CALENDAR Time to get the pencil out and circle a few dates in the calendar. Our 2022 > 2023 classic woody events focus equally on the boats and the people – its all about getting off the marina and meeting up with like minded people. As always, some dates may change and the weather is always a factor – but as the dates approach we will be in touch with more details.
Please feel free to share the calendar with your classic friendly boating enthusiasts. Where tide and draft permits – woody cruising yachts are always welcome to join in, so also share with the stick and rag woodys 🙂
AND TO ENSURE YOU GET A WOODY FIX TODAY – CLICK THE LINK BELOW Video footage from the 2022 Moreton Bay Classic (thank you Andrew Christie)
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 