Wairuna

DSC05202

WAIRUNA

Anyone looking for a low entry cost woody project?
I have been contacted by Phil Gilbert concerning Wairuna a 28’, c.1938-40 Bailey and Lowe launch.
Wairuna has had one owner for the last 30 years, who sadly is now deceased, & the vessel has been sitting on a mooring at Tryphena for a bit.
She is now in Westhaven & will go on trademe next week with a reserve of $500 unless a keen woody wants a bargain.
She is powered by a 90hp Ford diesel, including hyd box.
The hull has been re ribbed, and appears in good nick, no visible electrolysis, top is glassed, original foredeck under the ply and glass. Hull extended
under boarding platform, bigger fuel tanks, no water tanks, and galley has been removed as it has only been used as a day boat for many years.
To quote Phil ‘her bones are great, but the makeup has run a bit’ – all offers considered.
Would be great if we could find a new home & return her to Auckland’s classic woody fleet – or even Lake Rotoiti 🙂
Contact Phil at.   phil@gilbertmarine.co.nz

Seaway – A Peek Down Below

Screen Shot 2018-09-20 at 8.11.47 am

Screen Shot 2018-09-20 at 8.12.05 am

SEAWAY – A Peek Down Below
Seaway was designed / built by Sam Ford & measures approx 31’, with a beam of 8’10” & drawing 5’6”. Zoom zoom is via a ^0hp Ford diesel.
She has appeared on WW before but now thanks to trademe & Ian McDonalds spotting, we get a better look at her interior.
There has been a lot of TLC applied in the last 2 years & she appears to be a good buy at $25k, a good entry into classic wooden boating 🙂
You can see & read more on Seaway on this WW link, check out the comments section – lots of chat there.

Wooden Boating VIP On The Waitemata

Wooden Boating VIP On The Waitemata

Today I hosted Ben Mendlowitz on Raindance, Ben is the number one wooden boat photographer in the world & shoots for just about every boating magazine there is & produces the world famous “Calendar of WoodenBoats’ + has authored dozens of books on the subject.
While in New Zealand Ben was keen to photograph some of our classic fleet, so we headed out yesterday to catch the classic division of the RNZYS Winter Series race.
Ben will have some stunning photos, I was just the driver today so only took a few, very average photos – I did however capture 2 rare events:
1. Thelma going a ground off Stanley Point – some very red faces
2. Jason Prew venturing forward of the mast on Rawene – he didn’t look comfortable 🙂
Photos below – enjoy
THE NEW ZEALAND SAILING DINGHY EXHIBITION
In case you missed it – in 2 weeks (Oct 5>7th) is the annual Classic Yacht & Launch Exhibition at the Viaduct – this year the theme is ‘The New Zealand Sailing Dinghy’ – I’ll post more on the event during the week – but right now Tony Stevenson is doing a call out to anybody interested in displaying their classic NZ designed and built sailing dinghy, yacht class information or memorabilia.
Please contact Tony Stevenson tonys@nwv.co.nz  or 021 977 456
Screen Shot 2018-09-22 at 6.44.08 PM

Maureen R >> Moana Roa

Launching

Original Bostaki Bay

Bostaquet Bay c.1962

Maureen R

Orams 2000

Mooring Stanmore Bay

Stanmore Bay

MAUREEN R  >> Moana Roa
I love stories like this, out of the blue my email inbox goes ping & I get sent the below – thats one of the cool things about WW, the huge group of followers who help me keep the site alive. And on that subject, don’t hold back sending in photos & intel on vessels – where I can I’ll use it. Sometimes it may not be enough to warrant a story, then out of the blue, someone else sends we stuff on the same boat & we have the makings of a WW story 🙂
Stuart Johnston sent me the above photos of the Owen Woolley built launch – Maureen R. As far as Stuart is aware it was one of Owen’s early builds in his Tamaki River shed.
Maureen R was built for Ross Reid of the earthmoving company of the same name and named after his wife. Stuart’s father purchased her in late 1962 from Ross who had a new Patiki built which Stuart recalls was named Maureen II.
In regards to her size, Stuart thinks she grew under his Dad’s tutelage but he recalls she was 28′ but maybe 30′ overall and was powered by a 40hp Parsons Pike which could be started by hand with a crank through the bulkhead if the batteries were low.
The family continued to keep her in the Tamaki opposite the yacht club but was also moored her at Stanmore Bay on Whangaparaoa for much of the time and they spent many hours in and around the Kawau area.
When purchased by the Johnston’s the coamings were all painted and one school holiday -Stuart, his brother and a mate spent hours sanding off the paint including red lead to wood and varnishing, the end result which is seen in the photos above, when she is moored at Stanmore Bay and also launching from the beach after another seasonal paint job. The side on shot at anchor with a number of people on board is in Bostaquet Bay probably the summer of 1962 or 1963. The coloured image taken at Orams around 2000.
The family sold her to a Mr Maltby who used her from Tindalls Bay for some years and its believed she later found her way to Samoa and word would have it that she was used for charter work.
A somewhat ugly aircon unit was fitted to her cabin top which Stuart spied at some point on her return, he was told that she had hit a reef whilst in Samoa and was returned to Auckland for repairs when salvaged.
Stuart commented that she was a very pretty little vessel but did not like a following or beam sea. The fiberglass dingy seen swinging off the davits in some photos is still owned by Stuart.
So woodys – the question/s of the day – where she is today? and can anyone correct Stuart’s memories and or fill in some gaps?
Input from Harold Kidd– APYMBA records of her start in 1957 when she was owned by R.C. Reid of 27 Tamaki Bay Drive, Pakuranga with dimensions of 29’x27’x9’x2’9″ and had a 40hp diesel. Later owner C. J. Johnstone. All of that squares with Stuart’s memories. I have nothing after Stuart’s father.
Photos below ex Paul Drake
DSC03469
DSC02928
DSC03476

Norman and Jocelyn Pointon, at Waihora Bay, Lake Taupo.

Input from owners – Norman & Jocelyn Pointonn –  Maureen R >> MoanaRoa is berthed at Lake Taupo. We purchased her from the Fransham family in 1999 and had Bernie Dale renew the teak decks plus raise the dodger for sun protection and headroom in the cockpit. The builders plate states that she was built by Owen Woolley at Panmure in 1957
We have found her to be a good boat on the Lake, she does not like a beam following sea very much but apart from that a very comfortable and safe boat. We have continued to maintain her, new teak and holly floors, squabs, toilet, holding tank, stove, GPS and servicing of the Ford four cylinder engine and Paragon gearbox. 
The best useage that we have had is 40 trips in a year, so she is  well used and loved.
The story about her going to the islands was told to me by the previous owners plus the grounding a  coral reef. It was suggested that she made her way to the islands under her own power but that seems unlikely considering the amount of fuel required for the trip
The photo below shows the addition of the dodger, moored in Mine Bay where she spends a lot of time.
Alan on Moana Roa
And more photos ex Bruce Pullan – Feb 2018

07-06-2022 UPDATE ex Jason Prew – Spotted at Motuoapa Marina, Lake Taupo

Mystery Whangarei Launch

Screen Shot 2018-08-21 at 2.47.00 pm

Screen Shot 2018-08-21 at 2.47.44 pm

MYSTERY WHANGAREI LAUNCH

The above launch is listed on trademe as a ‘Samsford’ – one would have to assume they mean Sam Ford.

What I can tell you about her is that is is 30’ in length, built of wood in 1965 & is powered by a 4 cyl. 72hp Ford diesel.

Home post is Whangarei. (thanks to Ian McDonald for the listing heads up)

Anyone able to ID the launch & tell us more about her?

 

RainDance Back In The Water

Version 2

RainDance Back In The Water

I have had RD hauled out at Geoff Bagnall’s Milford yard for some winter maintenance & TCL. I always rock up with a list, the content of which makes Geoff chuckle & say “are you serious?”.
This year there were a few jobs that to most people would seem frivolous e.g. can you reduce the height of the bow rail. It was completely out of proportion for the size of RD.

I come back the next day & Geoff has done a template of the height (less than I wanted) & new shape – as always he was spot on & the finished job, to me, is perfect (not to Jason Prew – who has been telling me for years to remove it).

Thats the thing with Geoff Bagnall, he has a great eye for what is appropriate & more importantly what looks right.
It will be a sad day when he closes the shed doors for the last time & heads North. The wooden boating scene will be the poorer, great wooden boat craftsman & railway haul outs are few & far between these days. So woodys – while he is still around – use him 09 486 1445
Lots of other stuff on the list, including re-caulking an area of the garboard seam to fix a persistent wee leak, but the #1 – happy wife = happy life project was a completely new toilet set up. These days the size of a 12v electric head has reduced greatly, so we ripped the (not that old) unit out along with way too much piping / fittings & installed a new electric number + a monster electric pump to empty the holding tank (used to be a manual pump).
Still needs some shiny paint in / around the new head area, but very happy, there will have to be a ribbon cutting ceremony 🙂
Slashed some paint & Uroxsys on & in my eyes – she’s looking very smart. Still got a long To-Do list but thats 1/2 the fun of owning a woody, if you don’t like the process, buy a plastic boat 😉
RD Aug2018
RD was in good company at Milford, Nathan Herbert’s new woody – Pacific, is getting some major love & Jason Prew’s – My Girl, is very close to splashing, even sitting on the trailer, she looks very quick.
Screen Shot 2018-08-15 at 6.34.32 PM
IMG_0052
18-08-2018 Update

As requested by Jason Prew – photos below of my latest piece of bling – a Cattroll Collapsible Pennant Mast, made 25+ years ago by an Auckland company named R. Geo Cattroll. They were based a 1114 New North Rd, Auckland. The box it came in stated “Can be fitted to cabin top or deck mounting. Precision engineered from solid brass, chrome plated. Unique locking devise. Height of mast 889mm

I found it for sale on trademe, bid & won the auction – now he’s the twist. The seller was woody Nick Voerman, who owns the classic launch – Maria (ww link below). Nick bought a ‘job lot’ of old marine accessories / fittings for someone contacted to the long closed Cottroll business.
Fast forward several months & I was having 2nd thoughts fitting it to Raindance when snap – I spy the exact same fitting gracing the foredeck of Jason Prew’s launch – My Girl. Chatting to Jason, seems several CYA launch owners have acquired one from Nick. In fact the trademe listing is still live so he must still have a few. Be quick 😉
Excuse the square-drive screw, I’m doing my best to convert Geoff B 🙂 they will be replace .
MARIA
IMG_0093
IMG_0094

You will note in the above photos the deck was a little worn so as part of the 90th birthday treat, the decks, toe-rails, tram-top & dog-house got a lick of paint.

IMG_0143

IMG_0148

Genevere

Screen Shot 2018-07-20 at 3.11.17 pm

Screen Shot 2018-07-20 at 3.11.27 pm

GENEVERE

Today’s story show cases the Lake Rotoiti launch Genevere. She was built in 1908, builder unknown, measures 30’. Her zoom zoom is via a 45hp Perkins diesel that pushes her along at 6>8 knotts.

According to her trademe listing (thanks Ian McDonald), she has had a reasonable amount of TCL & engineering work done on her, so presents well.

At an asking price of $15k, she would appear a good buy. Anyone able to tell us more about Genevere?

 

Waimata

Unknown-1

Unknown.jpeg

Unknown-5

WAIMATA

Resident Lake Rotoiti boat builder Alan Craig (Craig Marine), sent me the above photos of the 28’ launch Waimata. She has just been at Alan’s yard for a hull paint job.

Alan commented that while a resident on Lake Rotoit she is not always seen at the annual Wooden Boat Parade.

Her owners believe she is a Collings and Bell built in 1926 & bought buy the Corson family around 1939 to bring to the lake. They changed the name so we are not sure of her original name.

Her zoom zoom these days is via a Nanni diesel, prior to this she had a Grey Marine & previous to that, something much bigger that made her “really go” according to her owner.

Interested to know if the builders plate is original? – I have not seen one like that before.

Waimata is a very well maintained woody & with Alan’s input is looking very smart.

So woodys – what do we know about this boats past?

Input from Paul Drake –

The C & B builder’s plate in this morning’s WW post is of interest.
Below is a pic of SIR FRANCIS’s plate from 1916. Notice the slight difference in phone numbers.
Rather unusual to have a phone number on a builder’s plate, don’t you think?
These days one might include an email address!
Alan H Question – when did Auckland ph numbers change from 4 to 5 digits?
IMG_20180702_101219 (2)

 

 

Working Waterfront Boatbuilders Shed – 50 photos

 

P1030420

P1030438

 

P1030433

P1030491

 

P1030458

P1030417

 

P1030471

P1030428

Working Waterfront Boatbuilders Shed – 50 photos

As I’ve send many times before, if your want a stunning day weather wise, schedule a Classic Yacht Association event – the hit rate must be 9/10.

Over 100 CYA members & friends made the trip north to Lees Boatbuilders at Sandspit – our host for the day, Greg Lees, turned on a brilliant woody event – we had everything – woody projects underway, the best collection of 1/2 models I seen outside of the RNZYS walls, a photo montage recording the history of the yard & the vessels built over the years.

 Center stage was Jenny & Angus Rogers – Mahanui, in the shed for a new deck, alongside her was a very original Chris Craft that was getting a restoration. 

The varnish guru Dale has already applied 23 coats, with 6 more to come. Compared to our old girls, these American woodys are very lightly built, amazing that so many have survived.

Outside we had Anna & Nic Davidson’s – Juanita, on one slip & Barbara & David Cooke’s woody flagship – Trinidad, alongside the wharf. In midstream was Yvonne, waiting her turn in the shed.

On the hard was a selection of small craft built by either Greg, his father Tim or other local craftsman. Not woodys but certainly classic were Greg’s two English built, aluminium Albatross runabouts – the very rare 4 seater is next on Greg’s to-do list. Included are a few photos of other woodys in or out of the water.

Greg gave an articulate talk on his families boatbuilding history & how they came to be situated on the Sandspit foreshore. At the end he announced the official launch of the 2018 Rudder Cup launch race to be run on Friday 14th December to Sail Rock & back. See flyer below, I encourage all woody owners to consider participating. At this stage we (I’m on the race committee, along with Jason Prew, Nathan Herbert, Baden Pascoe & Barbara & David Cooke) are calling for expressions of interest in racing – entry to the race is by invitation, as per the original race format in 1908.

 Big ups to Greg & family + staff for turning on the day, including BBQ. Special thanks also to the CYA committee members that pulled it all together. 

Lastly a little something below for the petrol heads – Greg had on display his Jesser BSA 500cc twin, hill climb racer. Built in 1962 by Les Jesser, she is a 2 time Australian  class champion. 

P1030422

P1030423

CYA Rudder Cup 2018 flyer

A Woody Sounds Cruiser

Screen Shot 2018-06-01 at 9.27.55 am

Screen Shot 2018-06-01 at 9.29.24 am

Screen Shot 2018-06-01 at 9.28.08 am

A Woody Sounds Cruiser

The above launch was built in 1960 by Ship Builders & is just over 30’ in length, with a beam of 10’5”. Her zoom zoom comes via a 140hp Perkins diesel. Home port is Picton.

In true broker style there is no reference on the trade listing to the boats name 😦 thanks to Ian McDonald for the trademe heads up.

Can one of the southern woodys give us a name & hopefully more details on her past?