Yearly Archives: 2019

Woody Weekend Coming Up

Posted on by
2

Screen Shot 2019-04-10 at 8.42.35 AM

P1220871_2 copy

Screen Shot 2019-04-10 at 8.40.20 AM

P1250107 2 copy

WOODY WEEKEND – THIS SUNDAY
This Sunday (14th) sees the CYA’s last launch hurrah for the summer – a cruise to the Riverhead Tavern. Conditions and timing are perfect and very civilised for a Sunday – 3m High Water @ 2.30pm, so we will be sliding up the ‘creek’ at 12>12.30pm. Leaving the hotel around 3.30.
For those leaving from the city and further east – there will be a gathering in the vicinity of the harbour bridge around 11am , with a re-group off Lucus Creek at approx. 12pm.
The occasional person comments to me “what Riverhead again” – but these trips are a great boating day and we get to mix & mingle at a cool venue, it’s also perfect for inviting friends and family that normally wouldn’t attend events ‘at sea’. If you are boat-less, its only a 1/2 hr drive from the CBD, so no excuse for not making an appearance.
The food is very good – from a simple burger & fries to sometime a little more up market 🙂 all tastes and budgets are catered for, and you don’t even have to dine – just enjoy a fizzy beverage and chat on the deck.
Remember to bring your dinghy, and if your unsure as to the best spot to anchor, just follow someone who looks like they know what they are doing.
See you there.
If you’re reading this and you’re not a current Classic Yacht Association member, tag along and find out what you have been missing.
cya-logo-stamp-finalah.jpg

Woody Lake Boat Project

Posted on by
6

IMG_4477

IMG_4475

IMG_4574

IMG_4576

Woody Lake Boat Project

I’m pretty sure this woody was a trademe listing for a very long time, so when I received a note from Rachel Jamieson from the Lake Rotoiti Classic & Wooden Boat group telling me Micheal Booth had bought an old wooden kauri 4 seater, carvel construction speedboat for restoration and attached the above photos –  I was so rapped that she had a new owner and her restoration would be completed.
 
I’ll let Micheal Booth tell the story 

“She  belonged to Andrew Lang the previous Harbour Master who now skippers in the Med. Andrew bought the boat in Rotoru and tracked the motor down in Rotoiti which he then restored. He had started restoration but because of his circumstances has elected to sell.

 I believe the boat was used by the Rangiheuia sisters on Lake Tarawera in the early days. It is of kauri construction and has an oregon ply transom. It is powered by an Austin 7 Thetis motor. Apparently the local historian knew of the boat but has unfortunately passed away. Andrew thinks this boat was designed by the  Logans and built by Lidgard. The boat is thought to be around 1934-36.
The boat builders I have taken it to aren’t convinced and wonder if the boat was of an American design but built locally. It measures 4850mm long, 1600mm wide and 1250 wide at the stern.”
 
Michael is wondering if anyone may some more information on the boat.
 

Pilgrim

Posted on by
2

Screen Shot 2019-03-06 at 9.15.54 PM

PILGRIM

Today’s woody is Pilgrim and the photo caption tells us that the date of the photo is 1939 and the boat was owned by Robert Murrell.
The lady on the left is Leila Black. (Thanks to Lew Redwood’s fb for the photo)
The location is Lake Manapouri in the South Island.
With the above detail we must be able to uncover more on the launch – design / builder / year etc and hopefully what became of her.
Input from Harold Kidd – Murrell’s PILGRIM was, I think, a rename of the Wanaka launch TINAROA which was in turn a rename of the Dunedin launch RALACO. A&T Burt were the agents for Ralaco engines and the likely builder is Jas McPherson of Dunedin in March 1910.
Kiwi Classic Featured on OFF CENTER HARBOR Website
Screen Shot 2019-04-06 at 9.16.19 PM
If you you have been hanging out for a good reason to subscribe to the offcenterharbor.com website – well its arrived – our very own woody – Pacific, has just made a quest appearance. The link below should allow you to see a 1:30 minute preview for the 10 minute feature video , check it out then hit the subscribe button.

Happy Days Launched

Posted on by
4

20181221_160206_Richtone(HDR)_resized_1

20190215_165112_resized

20190302_104427_resized

WAY BACK PHOTOS

20171106_132530

HAPPY DAYS – LAUNCHED 

In early December 2018 Alan Craig, the Lake Rotoiti boat builder (Craig Marine) sent in a gallery of photos of Happy Days in the final stages of her restoration, I have been bugging Alan for some photos post launching and late last week he delivered. 
 
First some background – Happy Days had been in a barn on a farm in for the last ten odd years. Her build started in 1930 and she was launched in 1933, 24′ in length, to a USA Hacker Craft design.
She has been owned by Peter Davies and was his Fathers boat from near new. Her history looks like this – built in Picton by Vic & Clarrie Olson? (Scandinavian or Swiss?). Built for a Mr Stocker then brought by Tom Davies in 1937, it was sold a while later and brought back again by Mr Davies once the wool price lifted and in 1950 an old, but still new, 1938 Osco marine flathead V8 went in it and is still there now – but wow wait till you hear that motor today – check out the video below. 
 
The likes below share some of her recent history :
 
The restoration    https://waitematawoodys.com/2018/12/10/happy-days/
 
Enjoy  – turn up the volume when you play the video 🙂
Photo below – as ‘found’
Screen Shot 2019-04-05 at 10.23.17 AM

What Are You Doing This Winter

Posted on by
Reply

1

Screen Shot 2019-04-06 at 6.07.31 PM

BOAT CRAFTS

Today I’d like to intro boatcrafts.nz  the new initiative from the NZ Traditional Boatbuilding School – in my words its a very hands-on series of workshops where we can learn / brush-up on the basic fundamentals of maintaining, restoring or building a wooden boat. The trustees, sounds a bit posh 🙂 are just a bunch of passionate kiwi boaties that care about the future of the wooden boating movement and unlike most of us are actually doing something to help us all out.
I’ll let the NZTBBS guys tell the story, see below. Note: Links to the individual courses are at the bottom of the page. Or check out the website.
Have a read and decide what interests you the most – I’m sure the 1st – “ Marine Propulsion Systems” would appeal to all boat owners – but note – numbers are limited to 20, so get in quick. Shortly we will be running a survey asking for your help on what subjects appeal the most – more details soon.
2
3
LINKS
MARINE PROPULSION SYSTEMS 
BUILD A 1/2 MODEL                             
ESSENTIAL SKILLS COURSE
LOFTING
WORKING WITH COMPOSITES
STEAM BEDING AND FITTING RIBS

Faith + The Milford Slipway opens

Posted on by
8

Faith

FAITH

Woody Steve Horsley on a recent trip down south snapped the above photo of Faith on Lake Te Anau.
I recall seeing previous photos but can not find her in the WW library – can anyone tell us more about her?
Input from Cameron Pollard – Faith was built in Scotland in 1935. Sailed to New Zealand in 1980 after cruising the Med. Currently has a 6L3 Gardner.
I was told by one of her old skippers the late Bill Anderson that she was originally twin screw. Bill could certainly tell a good yarn so that info cant be held as gospel.
Input from Dick Fisher

“Faith was built for an English Lord I believe his name was Shalcroft ( I can be corrected on the spelling of this).. Faith was purchased in England by a Roy Ryan who was employed by me at the time of his arrival in NZ having motor sailed all the way from the UK with all their household furniture & belongings. The crew consisted of his wife & young daughter.
Engine power at that time was from twin screw P6 Perkins Diesel engines. Faith was next purchased by Peter McDonald & berthed in Whangarei, he then commenced a major refurbishment
wherein the 2 Perkins were taken out & a rebuilt 6L3 Gardner was installed. At the same time the wheelhouse was rebuilt along with much other woodwork most of which was done by Nick Rodokal
The Gardner engine was from an ex fishing vessel purchased from Happy Yovich in Hikurangi.
The teak single skin planking is fastened with bronze bolts.
I have seen Faith hard at work on Lake Te Anau where my step-son now lives .

Hope this fills in some gaps for you.”
Dick Fisher
MV Akarana
Whangarei

New (old) Railway Haul Out Boat Yard – The Milford Slipway
I’m very happy to be able to tell you that Geoff Bagnall’s Milford yard is now back in business and operating under the watchful eye of woody Jason Prew.
Its called The Milford Slipway and if your a regular reader of WW I do not have to tell you the benefits of hauling out on a railway slip + they offer just about every service marine to would need.
So whether you just want to haul out for a quick bottom scrub and anti-foul or you need a boatbuilder, electrical, or engineer – The Milford Slip can sort you out + there is a covered workshop for vessels up to 55’ – I will do a full feature on the yard soon, but in the mean time I would suggest you give Jason a call on 027 454 2490 to book a spot, I have already slotted Raindance in 😉
If you have been hauling out city-side you will be pleasantly surprised with the yards rates 😉
Ps If you are like Mark Edmonds on Monterey and a little apprehensive of coming into the marina via the creek, the boys will meet you and pilot you in.

Ladybird Splashes

Posted on by
6

IMG_1001

IMG_0993

LADYBIRD SPLASHES

There were a lot of smilie faces in Devonport on Wednesday, as Mike Strong got ready to re-launch the 1949 Bert Woollacott designed ketch LadyBird. 

Mike had hauled LB out and into Kevin Johnson’s Devonport shed with the intention of a 6 months re-fit, well as they do, the list of things to do grew a little – fast forward 2+years and LB is looking magnificent.
The team at Boat Haulage, as always, did a slick job of collecting LB and transporting her to Hobsonville Marina. In anticipation of LB being a little thirsty after 2 years in a shed, there was an impressive collection of pumps on stand by, I suspect Mike will be camping on LB for a few nights 🙂
We will show you LB’s interior once Mike has finished putting all the bits back on board, in the meantime you can get a glimpse below at this link.
Question of the day – who’s next in Kevin’s shed? Be quick if you are considering hauling out, it never empty for long :-
Screen Shot 2019-04-04 at 11.32.27 AM
CAN ANYONE HELP SEABIRD OUT
Steve Thomas  the owner of Seabird has a gearbox problem (Paragon RB20 model Serial No: 5D 3527) and is looking for a replacement. Details and photos below.
IMG_1923

Woody Waiheke BBQ

Posted on by
5

IMG_0971

IMG_0972

IMG_0967

IMG_0958

Not sure what these two were up too but the t-shirt gets the WW of approval

Woody Waiheke BBQ

Saturday (30/03/2019) saw a group of hardy, the barometer was not saying summer, CYA members gather in Putiki Bay, Waiheke Island for a post CYA yacht race BBQ. The photos have been enhanced, it wasn’t quite that sunny 🙂

The bay filled up with a good collection of woody yachts and launches. The CYA committee even put on a band – well done guys.
Special thanks to Chris Sadler for the use of his launch – Moeraki as the start boat for the yacht race. Moeraki is a very smart looking woody, I have always admired her – great to see her out on the Waitemata. You can read / see more on her here (lots in the comments section).  https://waitematawoodys.com/2014/03/26/mystery-launch-26032014/
Woody launches in the bay included – My Girl, Lucille, Waimea, Puawai, Lucinda, Matuku, Summer Wine, Wirihana and Mahanui – some I suspect were moored there.
Special thanks to Jason Prew and Mark Edmonds for the (phone) photos.
As a special treat for the skipper of Lucille – I have include the youtube video below 😉

Sterling

Posted on by
7

image1

 

image2-1

STERLING
I have been contacted by Murray Wilson the owner of the 40′ ex workboat – Sterling, he bought her a couple of years ago and is in the middle of a ‘rolling’ restoration. Murray has been told that she was built by Ernie Lane in Picton in 1926 to tow logs out of the Sounds.
 

It’s rumoured that Sterling was involved in an incident in Tasman Bay in the 1960s or 1970s that involved the boat being found with a scallop dredge in the water, engine running and no one on board. When the dredge was lifted the skipper came up with it. 

 
Murray is keen to confirm and learn more of Sterling’s history.

Input from Harold Kidd – This STERLING was built by Ernie Lane in Picton in 1925 for L.J. Steele as a passenger vessel to carry 60 pax and had a 1924-built 3 cylinder 27hp (rated) Sterling marine engine bore 4.5″ x stroke 5.5″, dimensions 34′ x 9′ x 3’9″. The engine was changed to 27hp Ruston-Lister diesel by 1940 when she was owned by N.A. Steele and converted to a fishing boat under No. PN29. There was a Marine Dept enquiry in 1946 when she ran on rocks in the Tory Channel with the loss of two lives.

That 34ft loa was the MOT Thames measurement length. She was a 40 footer really.
Historical notes below from recollections of Lex Wells, recorded by Mike Davidson
Preface
Lex Wells has lived all his life in the Marlborough Sounds and has worked on and owned
many working boats in the fishing, scalloping and mussel industries. Lex is now over 80 and
has extensive memories and knowledge of many of the working boats and launches in the
Sounds. Arguably there is nobody better informed about Sounds vessels than he is.
History of the Motor Launch “STERLING”
1. The “Sterling” was built by Ernie Lane in the late 1920s for Matt Steel and joined his small fleet of passenger launches.
2. Matt Steel sold his fleet to Queen Charlotte Launches in the late1940s. Lex is not sure if
“Sterling” went to Queen Charlotte Launches as part of that deal; she might have been sold earlier.
3. In the 1960s or 1970s, “Sterling” was sold again and used for fishing and scalloping out of Nelson. One day, in the 1970s, the “Sterling” was found drifting, unmanned, on the scallop beds. The skipper had been working by himself. His body was found in the dredge when it was lifted.
4. After this accident, “Sterling” was sold to a new owner and went fishing out of Taieri
Mouth and was based there for many years.
5. “Sterling” was then bought by Ronnie Wells (a cousin of Lex’s) in the late 1970s or early 1980s and he brought her back to the Sounds. He used her for quite a few years in the scalloping and fishing industry, operating out of Havelock.
6. “Sterling” had a Gardner engine in it when Ronnie Wells bought it. At some stage
afterwards that engine was destroyed when an oil filter failed. It was replaced with a Russel Newbury (RN) engine. That engine was too old and had been poorly maintained and it eventually died one day when “Sterling” was working at sea. Lex towed her with his vessel into Havelock where a four cylinder Ford engine was put in “Sterling”.
7. Ronnie Wells then sold “Sterling” to Sunny Sunbeam and his business partner (might have been his brother). She was taken to Picton where a lot of work was done on her, including new top planks on the hull and a new and much larger cabin on the deck. She was taken back to Havelock soon after.
8. Sunny Sunbeam later sold her and she was taken away from the Sounds by her new owner.

Raider

Posted on by
5

IMG_2611

IMG_2613

RAIDER

One of my roaming woodys sent in yesterday the above photos of the launch – Raider, on the hard at Okahu Bay. I imagine the Harbour Master has parked her there. Anyone know what happened to her?

She appears to be a Parris or once was before someone got creative with a few sheets of ply. Perhaps a sister to Cherokee / Mistral?

Ever Wanted To Have a Peek Down Below On One Of The Classic Yacht Association’s A-Class Gaff Yachts

This weekend and next, drop down to Auckland’s Viaduct harbour and you can check out the likes of – Thelma, Rawene, Rainbow, Waitangi, Rawhiti & Frances. Details below.
Screen Shot 2019-04-01 at 3.50.49 PM