Lady Dorothy & Valerie

Image

Lady Dorothy & Valerie

Two fine classics anchored off Milford Island in Whangaroa Harbour, Jan 2013. The one on the left is Robin Elliott’s Logan 33 replica. The other is the Lane designed launch Valerie, c1933. Valerie is kept at Whangaroa Marina and currently owned by John Briers and Jackie Te Hore of Cable Bay. Valerie was for many years owned by the Reynolds family, close friends of the Pickmeres, who owned her up until the late 1960’s. Apart from a short period in Auckland during the 1960’s she has spent almost all her life in Whangarei and the far North. It is believed Valerie was sometimes used by H. Pickmere when he was charting the far north. Info ex Robin Elliott.

Viveen

Image

Viveen was one of Colin Wild’s early landmark motor launches, built in 1924 for W.G. Rapley of Devonport. She was thoroughly up-to-date for the time, a vee-bottom bridgedecker, very much in the latest American style, her hull design obviously influenced by the square-bilge planning hulls of men like John L. Hacker & William Hand.
Her original  power plant was a 35hp Kermath but that was upgraded to an even more high-powered Winton. Her owners raced her consistently until launch racing died out during the Depression when feeding such monsters with benzine became impracticable.
Until recently, Viveen has always been a waitemata woody, berthed in the Milford Marina for years, but not lives in Thames.
The photos show her many & varied styles over the years.  The oldest one was taken at Mansion House Kawau Island in 1924 & Viveen is the launch with the black hull on the right.  The other b&w photo was taken in 1938 off the Devonport wharf, after she was made into a flush deck. There is one of her berthed alongside  other Colin Wild launches (2nd on right) in the Viaduct  for the 2012 classic launch & yacht show & one of her today cruising the gulf.
Viveen is currently undergoing a ‘rolling restoration’ in the hands of Mechaela and Andrew Dobbs.
03-10-2018   Update from owners Andrew & Mechaela Dobbs.

We thought you might be interested in an update on Viveen, our 1924 Colin Wild bridgedeck, 7 years ago we bought this lovely lady with every intention of doing right by her, but time, money and circumstances didn’t allow it, so after a few major repairs, a new engine and a slop slap paint job Andrew took her to the Colin Wild exhibition at the viaduct and we used her pretty regularly on the coromandel after that but she started to look pretty sad and we made the decision, it’s happening now, so we’ve done it, she’s been out of the water about 6 weeks now and has had all her many layers of exterior paint stripped off, has had new fibreglass put on her top decks, repairs done to a few leaky parts and is now in the process of getting her hull splined, after that she will be getting a new paint job including a different colour scheme, and a slightly larger duck board but no changes to her classic look, we hope she will look a million bucks when we are done, we will update you with a finished photo whenever that may be as there’s still a fair bit to do.
Viveen 2019

Mistral

Image

Mistral

MISTRAL

Motor sailer owned by Barney Bensky of Barnett Barnett major furniture retailers of the day, in Dominion Rd Mt Roskill, built late 1930s or early 40s. He had her in the later 1940s & 50s. She had a Graymarine 4 cyl petrol engine originally. Not sure of builder, or what has happened to her in recent years.
Ken Ricketts who took the photo is interested if someone could bring him up to date.

MISTRAL --  AS AT 1.11.13 -- 2 MISTRAL AS AT 1.11.13 -- 1

Mataroa

Image

Mataroa

MATAROA. Owned by Ted Ward in the 1940s & 50s, photo taken in Matiatia in 1948 by Ken Ricketts. Possibly a Baileys boat, had a 6 Cyl Graymarine petrol engine. Not been seen for many a year – anyone able to advise her current status, location?
She appeals to me, looks as if she was fast.

Harold Kidd Update

MATAROA was built by Joe Slattery as KENYA for Len Heard of Parnell in 1928 with a 40/60 Ailsa Craig. So this pic is probably taken during Heard’s ownership ie 1938 or earlier. He sold her to  Seagar and replaced her with KENYA II built for him by Lidgard Bros and delivered in early 1940.

The RNZAF took her to Fiji in1943 for towing at Lauthala Bay and put a 6 cylinder Chrysler Crown in her as the Ailsa Craig was thought to be on its last legs and for spares rationalisation.

08-01-2015 Updated Info from Kevin and Jan Price.

We owned her for a few years after purchasing her from Maurice Reynolds (of Auckland Coast Guard). I believe she is now in Wellington.
She was originally names Kenya. She was nearly named Kenya Mist after a book title that was popular during her build, but the name was considered too long so shortened.
She was designed to fit into Len’s boat shed and had a droopy sheer line forward to fit under the door lintel, but it looked horrible and false works were built to improve her forward end appearance.
When Len Heard (Heard’s Barley Sugar) sold her to the Seagers, Len kept the name for his new bigger launch and the Seagers named her Mataroa after a much enjoyed cruise on the liner Mataroa.

She saw war service in Fiji as RNZAF No W71 and was employed in the construction of the Lauthala Bay breakwater to shelter the flying boats and also the metalling of airfield hard standing for warbirds. To achieve this she towed three barges totaling 90 tons. I was told that some of her trips down the Suva river fully loaded was sometimes a finally tuned effort to keep her lined up and thru the bridge. I was told her engine was only a 30hp Ailsa Craig at that time. Her Cox was a young 18 year old with a Fijian boat boy. Somewhere at home I have a tape recording of his wartime exploits.
Under her paint forward are scribed roundel circles.
Under that paint on the transom is the imprint of a brass bowsprit star received when towing a string of yachts home following the Suva annual Pacific yacht race.
She was offered back to the Seagers after the war. When they went to look at her at Herald Is she was not in good order and considered not taking her back, but did.

I think the engine was replaced by a Crown then later by a 90hp Ford wet sleeve by the Reynolds. 8knots at 1900rpm. (One day in a fit of exuberance I pushed the throttle to the wall and the GPS recorded 14knts)

After a mishap when an accompanying launch lost her steering and rammed Mataroa broadside amidships and split her open from deck to waterline she was run up on a nearby beach. The hull was propped out with an array of timber posts and she was motored back for repairs by matching the waterline wave curve with the bottom of the broken planking
She underwent repairs and refit. During this refit her rear house top was raised 4” and her vertical shaft steering column and flat “ bus drivers” wheel was replaced with the current more conventional setup. The round ports in the saloon where changed to oval for improved interior lighting. The saloon was relined with oak paneling. The overhead was lined in white Seratone as trying to maintain any sort of finish on the underside of the cedar deck was not possible due to it’s continuous movement. This refit was during the Renold’s time.

Under the forward cabin sole is/was a large admiralty anchor, possibly an original. Under the cockpit sole is/was a spare five blade prop.

1” Carvel Kauri.
Spotted gum ribs.
Possibly Pohutakawa stem.
Cedar deck / cabin tops for light weight.
Cedar sole floor boards screwed one Kauri floors.
No frames.
Mid and aft bulkheads removable, to allow engine to be taken out aft.
Log is kauri boxed and pitch filled.
Her capstan motor was an aircraft starter motor and reduction box that finally gave up the ghost when we owned her.
300trl copper diesel tank at the transom. Copper water tanks under cockpit seating.
No ballast.

That’s all for now. When I eventually get home ( we haven’t been home for seven years) I will look for some old photos I have tucked away.

Regards,
Kevin and Jan Price.

NZ Traditional Boat Building School’s Picnic Boat

Image

NZ Traditional Boating Building School - Picnic Boat

Photo taken during the 2013 Mahurangi Regatta of the NZTBS’s picnic boat designed by Robert Brooke & built under his guidance at the school. Check school out here http://www.atbs.org.nz

P1010397_2

Margurita sunsets

Image

Screen Shot 2013-04-14 at 8.51.03 AM Screen Shot 2012-08-21 at 10.17.06 PMMargurita sunsets

Margurita
Some stunning sunset photos taken by Silvia Juretich on board partner Zach Matich’s ‘Margurita’, Easter 2012, up the Port Albert river, yes I know thats stretching the boundaries of the Waitemata 🙂

Monterey

Image

Boat Const. Photos 003 (2)

Monterey , middle centre, top photo, under construction in the Lidgard factory alongside sister ships

Monterey (33’6”x32’x10’6”x2’7”) was built by Lidgards in 1946 for R.T. (Alf) Postles, an accountant, she was one of 3 the same, the others were Almaray (owned by Stan Bell-Booth) & possiblily Tangaroa was the 3rd one, all had 30hp Listers when launched. Postles sold her to Alf E. Hayman of 22 Omana Ave Mt Eden in c.1950 and it went later to John A Hayman of 5 Riverlea Ave Panmure in 1958 (Alf’s son?).
The old photo above was taken by Ken Ricketts, Christmas 1948.
Monterey’s owners Sue & Mark Edmonds are active members of the Classic Yacht Association.

Margaret S

Image

Margaret S

P1110259

Margaret S was built as MARNE around 1918-9 by Collings & Bell for J. Goodwill who had owned Lizard before. She had a Fay & Bowen Reliable 40 marine engine for many years during her ownership by W J Parker who installed it in 1923. Guy Tattersfield owned her in 1932 but she appears to have had her name changed to Margaret S when bought by panelbeater Alex Stewart of Prospect Tce Mt Eden around 1938. The Johnson family bought her in 1967 and she still had the Fay & Bowen then. They must have been good engines. Coquette had one installed at the same time as Marne/Margaret S.
Ken Ricketts took the old photo in Schoolhouse Bay Kawau Island Christmas 1948 when owned by Alec Stewart
Recently she sank at her motoring in Bayswater & was resuscitated by her owner – new photo by Alan Houghton

How to – create that aged bronze look

Image

I have always had a hankering for an old style boat signal horn but could not find one that (a) was not chrome or plastic (b) did not look like it should be on QE2 (c) did not sound like a freight train.
So I bought a small chrome one on trademe & being a clever bugger talked to the people at Porters Paints http://www.porterspaints.co.nz about their speciality finishes range – in particular their ‘Liquid Copper ‘ & ‘Patina Green’ products, which if used together recreates copper with the green patination of age. Its used in/out doors on things like downpipes & garden ornaments.  So I think its worth a go, as they say
First step – give the chrome surface a good sanding to score the surface.
Next paint (2 coats) with a vinyl etch adhesion primer
Next step off to Porters Paints for the first coat of ‘Liquid Copper’, looked a little bright but I’m told by the experts to have faith. One more coat then we start applying the patina effect, after the 2nd coat it started to tone down (darken) a little.
We left the horn for a few days & the ‘copper’ darkened even more & will continue to age with exposure to the elements.
The ‘Patina Green’ was then applied & I’m very happy with the end result.
Note Porters Paints are about to launch a bronze finish so I’ll update later on that.