The Building & Launching of White Cloud + A Peep Inside 1A Summer Street

WHITE CLOUD AT PENROSE - EX PAM MARE - 1

The Building & Launching of White Cloud + A Peep Inside 1A Summer Street

1A Summer St, Ponsonby was an unlikely location for boatbuilding, particularly for large launches. The building was built on to the rear of a retail shop, on the corner of Ponsonby Rd & Summer St., Auckland. Summer St was & still is an incredibly narrow side street, dating back to the late 1800’s.
To date on ww we have never seen good photos of the interior of the yard/shed, now thanks to the generosity of Pam Mare, we have access to the above photos. Pam is  part of the Buckby family, that had White Cloud built at the yard by Ben Hipkins, to a McGeady design. Ben bought the Supreme Craft, off Mac Mcgeady. Other craftsman at the yard were boat builder Garry Wheeler & Tracey Nelson, a marine & refrigeration engineer, who did the vast majority of the engine & machinery installations, in the Supreme Craft vessels, — along with looking after all the Ponui Island mechanical work, from  all the farm tractors, power generators, to George Chamberlain’s Lane built, tram topper, Falcon.

Such was the shortage of space at the building, that every boat that emerged, meant ,the picket fence of the house opposite in Summer St, to have to be removed & later replaced, to facilitate the exit from the building on to the transporter.

White Cloud left the shed in June 1965, to go to Fodenway Motors, Penrose, for engine installation & finishing. The photos below show her leaving the shed & later, on route to launching. Sorry for the poor photo quality, stills photos taken from old ‘home’ movie footage,  recorded by Len Buckby or his wife & made available to us by his daughter Pam Mare.
Special thanks to Ken Ricketts for pulling the individual pieces together.

WHITE CLOUD -- LAUNCHING DAY -1965 - 6

Tamara – Sailing Sunday

IMG_0929

TAMARA – Sailing Sunday

I popped down to the marina to check on the boat last week & discovered I have a new neighbour – the yacht Tamara. I know almost nothing about her other than her owner has just finished an 18mth restoration, the standard of which made me think she was a new build, quite stunning & a wonderful mix of painted surfaces & varnished trim. Looks seriously set up for some offshore cruising.
Any woodys able to tell us more about Tamara?

Input from Neil Chalmers

A Dennis Brown design . A talented yachtsman/ boat builder/ designer . He lived in the BOI and designed wholesome wooden cruising yachts – Chantal, Freya , Harmonie , Solita

I’m not out boating this long weekend but I’m very close to the water, in fact there boats are tied up at the edge of the lawn. If you ever wondered what happens when Waikato dairy farmers get too old to tend their farms, the answer is they lease the farm > sharemilker & buy a waterfront pad + marina + big plastic boat. Must be nice to have your boat at the bottom of the garden, but it would limit the ability to sneak away for a wee snooze on the boat 🙂

Avanti – 23′ Woody Run-about

Screen Shot 2017-05-30 at 10.04.39 AM

Screen Shot 2017-05-30 at 10.09.03 AM

AVANTI
Avanti is an early 1960’s wooden hull boat, built in the Marlborough Sounds at Curious Cove by the Manning family. It was modeled on a Chris Craft boat the builder had seen in a book.
In the 1970’s the top was added by boat builder Bill Orchard in Picton,

She is fitted with an Iveco (fiat) 8014m marine engine 72hp @ 2900rpm or 86hp @ 3200rpm. The boat does about 11 knots with the current prop.

Given its location, a lot of people will have rubbed up against her, so can we find out some more about her?

RAIRA – A Peek Down Below

Screen Shot 2017-05-29 at 7.50.12 am

Screen Shot 2017-05-29 at 7.50.22 am

Screen Shot 2017-05-29 at 7.52.03 am

RAIRA – A Peek Down Below

Raira was launched in Devonport in February 1915. Built by the McLeod Brothers to a Collings and Bell design.  She has appeared on ww before but now thanks to her trademe listing we get to have a look inside 🙂
The great looking interior is the result of a full restoration completed in 2011. This included: new steamed ribs with copper fastenings, new bulkheads, new keel fastenings, all paint removed back to timber and her hull re-caulked + just about everything else on board was replaced or upgraded.

In late 2016 Raira was repowered with a 120hp Ford on an zero hour rebuild, that pushes her along at between 7.5>9 knots. At  the same time she was treated to exterior paint job.

Woody Ian McDonald commented that when he used to slip his boats at Omokoroa in the early 1980’s, Raira was on a swing mooring there & unless mistaken, the game poles are just as they were back then.

She is a pretty boat, but I’m not sure about the ‘poop’ deck 🙂

ps sorry about yesterdays story & the link not working, technology let me down 😦

Mt. Pleasant

Mt PLEASANT
The below video is of the 1916, 40’ newly –restored Sydney, Australia ferry – Mt Pleasant. Batemans Bay is home for Mt Pleasant.
The video was done to coincide with the 75th anniversary of the sinking of the HMAS Kuttabul in Sydney Harbour on May 31 1942 by Japanese mini-subs. Mt Pleasant was tied up alongside Kuttabul at the time.
Thanks to WoodenBoat & the Bay Post / Moruya Examiner for the heads up re the video.

Stunning restoration 🙂

https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fbaypost%2Fposts%2F10154426348671123&width=500

https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fbaypost%2Fposts%2F10154426348671123&width=500

Kahu

KAHU - O

KAHU 4 -- HMNZS KAHU AS SEAGOING WORKSHOP c1950s

KAHU - 3 -TOP CONSTRUCTION

KAHU - 5 c2000s

KAHU - 1

KAHU

Over the last 10 years every time I have motored past Kahu, when she was moored in the upper reaches of the Waitemata Harbour, just past the Greenhite upper harbour crossing, probably 50>60 times & each time was pleasantly surprised she was still a float. The old girl has had a very checkered past & unfortunately during numerous periods of ownership, all with big plans for her – nothing really came to fruition & she appeared destined for the knackers yard.

I can report that she is now in Whangarei undergoing a major refit. Fingers crossed that this time she returns to her former glory. Ken Ricketts sent me the above old trademe photos that record some of her WWII period, post WWII Navy service (c.1950s), her almost conversion to a passenger ferry (c.early 2000’s), a neglected moored hull.

If there are any woodys that can tell us more about her past & if there was a Northland woody out there that can give a use an update on the project, please do 🙂

01-06-2017 Update ex Geoff Brebner

Photo below of Kahu on her way to Whangarei c.2012

Kahu_in_tow

Interested in reading more on all things Motor Launch, be they serving in the Navy or in civvy hands. (over 250 photo’s and 50+ stories and tech data / links to other ML pages) Check out the link below
 

http://rednaz1958.blogspot.com/2016/03/composite-list-of-hdmls-still-active.html

Ngawini

Ngawini

Ngawini 4

Ngawini 6

Ngawini 5

NGAWINI

I headed out on Sunday afternoon for a few hours to give Raindance’s batteries a charge & when coming back into Bayswater I spotted what appeared to be classic wooden launch on the Mercury Mover barge. Closer inspection revealed a 26>28′ straight stem tram topper.

The name Ngawini was on her side & she had quite significant damage to her bow & underwater bow area. Looked as if she had ran into some submerged item. Aside from the damage she appears to be very original. Hopefully insured & repairable.

Any woodys know more about her past & what happened to her?

UPDATE – she has been on ww before – see below & also link to more details.

Ngawini

UPDATE 2 + photos

“Aaron here from The Recycle Shop at the Waitakere Transfer station. Hey we’ve seen the photos of the lovely boat Ngawini on your site. We’ve got the boat sitting here on our yard and wondered if you might be able to help us find it a new home?

We’ve had a couple of people offer advice on what some of the fittings are worth and we’d like to offer the whole boat for $2000 if the buyer takes it away, or $2300 if they want to strip parts and leave the rest here (leaving us to pay approx $300 to dump it).”

 08-06-2017 UPDATE

I have been contacted by Aaron at the Waitakere Refuse & Recycling Centre & told that they have listed Ngawini on trademe (link below) as a ‘parts’ listing. Bidding is set to start at $1,200, it will be interesting, some cool pieces but what the market is prepared to pay is any ones guess.

 

http://www.trademe.co.nz/Browse/Listing.aspx?id=1342362960&ed=true

Kawhiti – A Peek Down Below

Screen Shot 2017-05-12 at 9.08.33 AM

Kawhiti – A Peek Down Below

Kawhiti, the 42′, 1952 Collings & Bell bridgedecker has appeared on ww before – check out the link below for details on her past. Today’s post, thanks to her trademe listing, gives us a look down below.

Kawhiti

Kotiti – Sailing Sunday

FullSizeRender-4

FullSizeRender-2

FullSizeRender-3

KOTITI – Sailing Sunday
The above photos are of the schooner Kotiti & were sent in by Lesley Brennan, whose father, Dudley (Lex) Dowling, owned her from November 1963 until 1968. Lesley was a teenager at that time and their family and various crew spent their summers cruising the Hauraki Gulf and the Bay of Islands and Far North. It was then sold to John Wicks who took the yacht to the South Island. Lex, kept copies of everything and Lesley has inherited two files relating to Kotiti & to other boating matters (purchasers, receipts, logs, etc) at that time in the ’60’s.
The yacht had quite a history, having once been stolen before Lex bought it. Later, while under his ownership, a crew from the Navy in Auckland raced it in the Whangarei to Noumea race in April 1964 and in the same year, Lex sailed it with a crew to Fiji (a lifetime ambition).
For many years Lex taught navigation based on a system he devised himself specifically for sailors of small ocean going boats. He also self published a related textbook on navigation (long before the internet and the electronic age!) and this textbook was in much demand at the time and sold well in NZ and throughout the Pacific.
Lesley last spotted Kotiti up on the hard at Sumner in 1994 & she would love to know who the current owner is. They may be interested in having the two folders of information about their boat during the 1960’s.
So woodys – do we know who owns her today & what became of her post Lex selling her. I’m sure if the John Wicks mentioned above is the JW that comments on ww, we will find out a lot more.

Input below from John Wicks

I sold her in ’78 or ’79 to Jim Wood who I think still has her. There was a recent pic on WW of a boat in Havelock Marina with Kotiti in the background and looking well cared for.
As noted above, I bought her from Lex Dowling in ’68 and took her back to the South island; specifically to Waikawa, Picton . Cruised her extensively in the Sounds, D’Urville Island and across Tasman Bay to Nelson, Torrent Bay etc., and we did several Cook Strait races.  
Her genesis is interesting. She was built by Peter Lamb, a science(?) teacher at Christchurch Boys High School; I met his son at one stage, who was adamant his father designed her, but when I first owned Kotiti she had amongst her documents two pieces of blueprint, one of her body section and one of her backbone structure, both of them bearing Eric Cox’s name. I have already seen Cox’s “Dancing Feather” design, the interior layout of which was very similar to Kotiti’s, and years later came across Howard I> Chapelle’s “Corsair” designed for ‘Popular Mechanix’ magazine which closely resembled Kotiti in hull form. “Corsair” was designed for inside ballast; “Kotiti” had 2/3 of her ballast on the keel and 1/3 inside. (Quite a story there)
I have also been told that noted ChCh boat builder Cliff Mahan bought a set of “Corsair” plans with a view to building one for himself, but never did.
There is a photo in an old “SeaSpray” of Peter Lamb standing under the coutner of soon-to-be-launched “Kotiti” showing a model of her to Ian Treleaven. To my eye at least, the model looks more like “Corsair” than “Kotiti”. My conjecture (and it is only conjecture!) is that Peter Lamb looked at both designs, took what he wanted from both, made the model then went to Eric Cox to take off the lines and draw the actual plans.
At any rate, she was (still is, I hope) fast and weatherly for her type, comfortable and sea kindly. I have very fond memories of her.

A Wee Woody Double Ender

Screen Shot 2017-05-26 at 5.20.28 pm

Screen Shot 2017-05-26 at 5.18.25 pm

A Wee Woody Double Ender

Today’s boat is a double ender made with cold molded double diagonal Kauri planks. Built in 1960 by Hal Atkinson at York Bay Wellington. It is 4.5m long and 1.8m wide. She was treated to a new 3.5hp Petter diesel engine in 1980.

For sale on trademe – do we know any more about her?. Thanks to Ian McDonald for the Tme heads up J