KATOA
The photos above of the 37’7” launch Katoa , were sent in by Bay of Islands woodys – Dean Wright. Dean snapped Katoa in the Te Puna and Kerikeri Inlet area last week.
Designed and built by Geoff Bagnall in 1988, she may by ‘youngish’ for a woody but she is an oldie at heart 🙂 Powered by a 130hp Lees Ford diesel.
Katoa has appeared on WW before – link below for a peek-down-below. https://waitematawoodys.com/2019/06/19/katoa/
Classic Wooden Small Boats
In the days before remote controlled model yachts – the yachts were divided into two kinds – Free sailing – were boats were sailed in open water and ‘chased’ by their skippers in dinghies who ’touched’ the yachts during the course of the race to adjust their course.
The other kind was – Pond yachts, sailed on small lakes, basins or special ponds (in parks), the skipper would race around the pond to tack or gybe the model as it got close to shore. Refer b/w photos below for examples of the racing.
The top colour photos were sent to me by an ex work colleague – John Maxwell, we worked together over 30 years ago in the crazy world of advertising in the late 1980’s. Unknown to me, one of John’s passions is the building of old style pond yachts, but with a modern take, refer examples above of Ranger, Innismara, Infidel, Meter class (black hull) and one in the vein of an A class. Not exactly accurate, but instantly recognizable as the original. They are all hand painted, so as to faithful to the old style. John commented that the problem with making the models sail, is that the depth of the keel, mast position/ height etc, have to be altered slightly from the plans of the real boat, otherwise it just sails sideways or rounds up into the wind. John aims to capture the spirit of the original, but still maintaining the ‘Old school’ charm of the yesteryear pond yachts. They are all free sailing models and quite big ie 1.8 m long. Typically they have a lot of lead on the keels approx 15-20 lbs., most are balsa over wooden frames with glass over the top.
Stunning work – but it doesn’t surprise me, John was / is a very talented man, and rather good with a paint brush and canvas.
DOES ANYONE KNOW A ROSS DIXON (or Michael Adams) previous owners of the launch Menai – if so could you ask that they contact me on waitematawoodys@gmail.com
Ngapuhi was built by Brian Lane in 1952-3 as a towing launch for Lane & Sons (Timber Millers) at their premises in Totara North, Whangaoa Harbour. Originally named Waihou. Purchased by Northland Port Corporation in 1963 her name was changed to Ngapuhi & she served as the pilot boat for the Whangarei Harbour Board for 35 years.
During 1983-4 an extensive refit was carried out when a larger aluminium wheelhouse was added. The original 2x GM471 engines were replaced with new 6LXB Gardners, propshaft angles modified, and larger rudders made to suit the new engine installations.
Has been in current ownership since 1998 during which time was chartered back to Northland Port until 2000 & kept in SSM survey for 16 passengers until late 2013 when the SSM regulations were changed.
While based in Whangaroa her owners have completed numerous trips to the Three Kings, Waitemata, Gt Barrier, & also used to view the racing the last time Team NZ hosted the America’s Cup in Auckland.
Details below:
Length 13.84m Beam 3.70m. Draft 1.07m. Reg tons 22.
Engines 2x 6LXBM52 Gardner 1984. Diesel Engines governed to 1500RPM, 127 HP continuous rating.
Gear boxes Twin Disk 1.45-1
Fuel Capacity 1400 litres Water capacity 200 litres
Max speed 11 knots at governed rpm. . Cruising speed 8-11 knots. . Fuel consumption approx. 25 l/h @ 11 knots, approx. 18 l/h @ 8 knots.
Hull construction. Carvel plank Kauri over laminated frames of 70x40mm @ 250mm centres.
Other features. Icom VHF, Furuno GPS plotter/sounder, walk in engine room with fan forced ventilation. F’ward and aft cabins, galley, separate toilet with holding tank, wash down pump, 2x sets of fixed manual & electric bilge pumps & other safety equipment to meet previous survey requirements. Currently 3-4 berths, easily expandable to 6-8.
Thanks to Ian McDonald for bring the tme listing to the attention of WW.
FRUIN
I have been contacted by Neville Watkin in regard to his classic launch – Fruin. Neville knows very little about her early history, but believes she was probably built just after WW II (late 1940’s) and is kauri planked.
The above photo was taken in Cissy Bay near French Pass in the Marlborough Sounds in 2016. More recently her hull has been re-caulked and repainted and she currently doesn’t have a name.
Neville is keen to uncover any information on the vessel and suspects she was renamesd at some stage in her life.
Can anyone help Neville put the correct name on the launch.
OPUA MARINA / HARDSTAND MOOCHING
Woody Dean Wright snapped the above selection of woodys that he spotted at Opua at the weekend.I have supplied links to previous WW stories below. I know I’m a broken record, but Luana …………. 🙂
Luana https://waitematawoodys.com/2016/04/01/luana-4/
Ngapuhi – Ex pilot boat, more on this one later in the week
Florence. https://waitematawoodys.com/2017/12/28/florence-6/
Typee. No details known
Sea Mate (Birdsail 52 on the marina) – No details known
Dean didn’t catch the name of the ‘long’ keeled yacht in the last photo above – any one able to supply details?
Input from Neil Chalmers – Could be ‘Restless’ – Lou Tercel / John Alden April 1920.
Input from Simon Smith – The long keeled yacht is indeed the Tercel yacht Restless. 100 years old and owned by Russell resident Tim Beattie who being a master painter has her in beautiful condition. Always sails in the Tall Ships Race but with her ocean cruising rig needs a strong breeze to show her mettle.
Chantal – Sailing Sunday
Chantal was designed, and built in 1981, by Denis Brown, in the Bay of Islands. LOA 8.24m, DWL 7m, Beam 2.1m, Draft 0.9/1.9m Displ 2,450KG
A 3/4 rig, double ended, centreboard, sloop, that is easy to sail single handed, and very quick in light air. Great for cruising, as the shallow draft with the board up, gives you more options for exploring and anchoring. Fun to race as she is pretty efficient up wind, and has very low drag on a reach. Sailing photos taken during the 2017 Tall Ships Classic Invitation Race.
Constructed in Radiata Pine and Kahikatea, opposing diagonal 4.5mm laminated planking, outer sheathing 5mm lamination longitudinal. Everything well soaked in West System Epoxy. Centrecase fabricated in 6mm mild steel plate, which holds 1200KG of lead ballast. Centreboard is solid Kauri. Shaft tube and bearing setup for a small inboard motor, which we installed back in 2000 and removed again in 2001.
Sleeps 4 comfortably, and while space is fairly tight the arrangement feels generous. Single burner gas stove, storage space for a medium sized chilly bin and jerry cans for water. Torches and candles for lighting, and a chemical toilet. A very simple set up.
(details & photos ex owner – Bruce Mitchinson)
WIN AN OFF CENTER HARBOR CAP
All correct answers to the question below, go into the draw to win an OCH cap. Enter via email only at waitematawoodys@gmail.com Closes 8pm 13-12-2020
Q – Name Bruce Mitchinson’s classic launch
SCROLL DOWN TO YESTERDAYS STORY – STARTED OFF WITH ONE OLD PHOTO, MORPHED INTO AN AMAZING RESTORATION STORY 🙂
MARINUS – Where Is She
The launch – Marinus was built in 1938 (apparently by Barr-Browns in Wellington) for commercial work in Cook Strait and was Lloyd’s registered to carry 5 tons. It is believed that Barr-Browns were cabinet and furniture makers in that era, rather than boat builders and in later years, Barr-Browns were machinery merchants selling the likes of forklifts and other industrial machinery.
Unconfirmed, but she probably was originally powered by twin Gray Marine inline 6-cylinder engines, and was re-powered in about 1965 with two 1956-ish Rootes TS3 2-strokes, which were located directly under the bridge floor. The gearboxes she had in 2001 were 26 spline Borg-Warner Velvet Drives.
The photo above was taken in January 2001 at Pine Harbour. Post this date she may have been moored at Great Barrier Island for an extended time frame. Rumour has it that she experienced several semi sinkings due to bilge pump issues. Marinus was taken over by a new owner who towed her to Whitianga and on-sold her to another individual who either towed or motored her Whangamata, where her engines were removed.
Nothing is known about the boat post being kept on a swing mooring at Whangamata. So woodys can anyone tell us what became of this woody, did she survive?
Update – photos below of – Marinus, which were taken in January 2015 at Gibbs Landing on the Barrier. She had been towed over to the wharf from her swing mooring after being pumped out the last time. Click to enlarge photos
Update #2 – Below are the as-was interior photos before being towed away from the Barrier in 2015. Over looking the untidy appearance and the need for much TLC, you can see how well designed the interior was for such an old girl. Very spacious and well appointed for her age and with twin TS3 engines, the floor in the bridge was flat (no engine boxes).
Note the Lloyd’s Reg Number on the bulkhead, in what was then the bathroom / shower / toilet area.
According to the Gt Barrier is. owner, she was apparently built in 1938 to an American design (which might account for the sloping windscreens), but wasn’t launched until after W.W.II.
UPDATE # 3 – I received a call from boat builder Geoff Bagnall today and Geoff pointed me in the direction as to where I could find Marinus. Geoff has been working on her and while in my eyes some areas are a tad modern looking – what a difference from the above Great Barrier photos. Just goes to prove that old saying “every dog has its day”. An amazing rescue job, who ever the owner is, they deserve to take a bow – well done 🙂
14-12-2020 Harold Kidd Input – MARINUS was owned for many years by Keith Lackey of Wellington.She was built by Barr-Brown, Owen and Stewart and launched in 1947. Her first engines were twin 6 cyl Gray petrol. According to Lloyds she was designed by A.M. Deeming.(an Opua Deeming??).
Hokianga Mystery Wooden Boat – Seabird
WW was sent the above photo by Alistair Rowe, who took the photo earlier in the week from the deck of the Boathouse Cafe in Rawene. As we see her above, there is an interesting mix of lines and styles – and one would have to assume she started life as a work boat. Her colour scheme indicates that someone loves and cares for her.
Keen to learn more about this old girl.
Input & photos below from Cameron Pollard – SEABIRD. Been on Hokianga for eternity. Powered by a 100hp Hino noise maker.
11-12-2020 Harold Kidd Input – SEABIRD was built at Motukaraka by Kelsey Bros to their own design for their own use in April 1912 with a 6hp Automatic engine. Another clone of Chas. Bailey’s MILKMAID.
WAITEMATAWOODY CHRISTMAS PRESENTS
Just a heads up, we have almost sold out of WW merchandise, orders have been coming in think and fast over the last month, even without any promotion – on Monday we sold 16 t-shirts to a very big visiting yacht – seems all the crew are getting one in their Santa sack 🙂
The WW cupboard as of today looks like this:
Mens short sleeve dark blue – size 2XL – 8 in stock
Mens short sleeve dark blue – size 4XL – 1 in stock
Mens short sleeve dark blue – size 5XL – 2 in stock
Mens short sleeve orange – size 2XL – 1 in stock
Mens short sleeve dark brown – size L – 8 in stock
Mens short sleeve dark brown – size XL – 4 in stock
SOLD OUT of hats
T-shirts are $34.95 + $5 p&p. Email me the size / colour you are after and I’ll get back to you with availability and payment details. waitematawoodys@gmail.com
MANUIA
The c.1928 Joe Slattery built 32’ launch – Manuia has made a couple of appearances on WW, link here to intel and photos on her past https://waitematawoodys.com/2017/05/06/manuia-an-update/
Manuia recently popped up on tme (thanks Ian McDonald). At the hands of her present owner she has received an updated interior (but in keeping with her date of birth). Built from heart kauri, these days a 100hp Yanmar 4JH3-HT6 pushes her along at a good clip.
From the above photos Manuia appears to be very well appointed.
Lake Rotoiti Classic & Wooden Boat 2021 Calendar Winner = Murray Deeble
Seacraft Clinker Dinghy For Christmas
After yesterdays mammoth story on the Patio Bay weekend, today we come down to earth with a woody at the other end of the scale.I have been contacted by Jill & Laurie White looking for the next owner of their 10’6” Seacraft clinker dinghy. The White’s used to own the launch – Siesta, but have moved on and would now like to pair the dinghy up with a woody classic or maybe a lake based woody looking for a cool trout fishing boat. Laurie mentioned it tows and rows beautifully.
The build date is probably c.1960’s and a previous owner told the Whites it was built from Sumatran mahogany. Back in 2014 the dinghy was paired up with the road trailer seen in the photos, also available is a Yamaha 4hp.
So woodys – looking for a fun boat for the xmas holidays? Use it this summer and then pop it in the shed for a make-over next winter.
Interested buyers – contact initially via email – waitematawoodys@gmail.com
WIN A LAKE ROTOITI CLASSIC & WOODEN BOAT 2021 CALENDAR
All correct answers go into the draw for a copy of the LRCWB calendar. Drawn 8pm 08-12-20. Enter via email only – waitematawoodys@gmail.com
Q – Which classic yacht won line honours in last weekends CYA race to Patio Bay?
Hint – you might have to read yesterdays story to find the answer 😉
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 