If you searched the name – Maroro on WW you would uncover a lot of content, it was a popular name once. Todays Maroro is not one of the boats previously featured.
Her story has her as a Bailey design / build, year unknown, approx. 28’ in length and powered by a 50hp Isuzu diesel engine.
In the last 20+ years Maroro has been a resident of both Milford Marina and a swing mooring at Paremoremo Inlet / Creek.
Top photo shows her in her ‘prime’ – following photos taken last week at the Milford Slipway, her new adopted home. Plans are to return her closer to as launched – refer b/w photo below. Note the mast / sail is a yacht alongside, being rescued. The # 511 on her side was her Coastguard number at the time.
Are we able to confirm / add to what we know about Maroro.
WW was recently contacted by Eric Sanderson in regard to his uncles boat – Lady Fay. Best if Eric tells us the story –
“The hull was built by Orams and Davies Whangarei in the early 1950’s and finished off by my uncle Jack Sanderson with twin 3 cylinder Lister motors fitted. Orams also build the Irene around the same time, either a year later or year before. The owners were good friends of Uncle Jack.
Lady Fay fished commercially out of Whangarei till 1967 and was sold to a car salesman or someone in the trade, and went to Auckland. Not sure of their name, then 2-3 years later boat was put into Ship Builders for a complete make over, the Listers were removed and two Fords were put in and a bridge deck was added. This I was told by another Uncle who lived in Auckland at the time. Must be some one from Ship Builders in the 1970’s will remember Lady Fays make over.
Boat was then named – Arthur Daley, I have talked to a owner in late 1980’s early 1990’s and he did not want to know his boat was 20 years older than he thought, and was sure it was build in the 1970’s, which fits in with when it went to Ship Builders for it transformation to bridge-decker.
I believe the boat is now named Compass Rose and is still in Auckland and for sale.
So woodys can we help Eric fill in any gaps and and history on the vessel. (sorry about the photos – very poor quality)
06-05-2023 INPUT EX ASHLEY SIM – As previously mentioned by Alan Keane – the broker I bought Arthur Daley through – I purchased her in 1993 from Greg and did quite a bit of work on Her. The twin Fords had quite a vibration so I installed rubber engine mounts and it made a big difference. They were sweat running engines with lovely controls. I also fitted out the forward cabin with a double berth and extra head. I sold her in 1995 – through Alan – to her current owner.
NEW COLOUR WAY – limited run 1. One size fits all 2.100% canvas/cotton, 6 panel, adjustable brass clasp 3. Colour is camel with dark brown embroidered logo. 4. Tonal under peak lining.
WW was contacted by the Opua based boatbuilders – CMC Design with a heads up that the 1927 ex game boat Alma G II had arrived at their yard where Craig McInnes and his team will undertake the work. Projects of this magnitude are the norm for the team – the woodys Lady Crossley and Otehei being two examples.
Sian Steward at CMC Design supplied some wonderful insights into Alma G II’s provenance and the people that rubbed up against her – I’ll let Sian tell the story:
“The Alma G II was commissioned by E C Arlidge in 1927 to be built by Collings & Bell of St Marys Bay. Timed for Zane Grey’s second trip to New Zealand, Grey asked if the boat could be named after him. A familiar sight in the game fishing era alongside other classics such as the Alma G (another E C Arlidge boat, built in 1922), Manaaki (also owned by EC Arlidge for a period, later sold by the Arlidge Bros to Eric Sanderson of Whangaroa/ Totara North in 1932 for 172 pounds), Otehei and Lorna Doone. The sons of Ernest, Francis and Mervyn, known as ‘Arlidge Bros’ took to the family boating business around age 19 and were the original skippers of the Alma G and Alma G II respectively. Advertising them as the most ‘up-to-date boats in the Bay’ ‘being speedy and comfortable’ with all the latest fishing tackle and swivel chairs for deep sea fishing and available for ‘picnic parties’.
The boat was originally launched as the Zane Grey. Subsequently, rumour has it that Zane Grey and the Arlidges had a falling out, and the boat was renamed Alma G II around 1931.
The boat stayed in the Arlidge family for many decades until it was reluctantly let go around 1975. Dave Smith fully restored her, and she was relaunched in 1977as the Zane Grey. Most recently she was left to settle down the line in a paddock awaiting the moment where the new owner could tackle a large restoration project.
Tugging at the family history heartstrings, the Arlidge family had kept an eye on the happenings of the boat over the years and approached the recent owner to purchase her back into the family fold. They are now embarking on a restoration project with CMC Design to relive many childhood memories and get this family legacy ready to be enjoyed again by many more generations of the family.
The Arlidge family have kindly shared some of the classic photos of the Alma G II in the Bay of Islands. The Short Sunderland flying boat is dropping off some prestigious game fishing guests (many of whom were Arlidge Bros patrons over the years including Lady Ashley Dodd, the French flying ace Pierre Closterman, Zane Grey of course, his brother RC, and Carrie-Fin and Ham Guild as a few examples of the era).The story as far as we know for this photo is that it was the Admiral Earl and Lady Mountbatten on their visit in April 1956. In the photo with the black marlin is a young Mervyn Arlidge.”
We will follow this project and keep you updated.
Photos below are from previous WW stories where Alma G II has featured.
Today woodys we get an amzaing birds’-eye view of the recent x.The above 5min video both showcases the stunning scenery of the Queenstown,South Island area and the fleet of woodys that assembled for the inaugural Southern Lakes Classic & Historic Boating event.
Grab a coffee/tea and sit back and take it all in. Sadly the reproduction of the video is limited by file size (2GB+) – I just wish you could see it in HD. Click on this icon (shown below) in the bottom right hand corner of the screen to view in full screen 😉
(special thanks to Peter Williams for sharing the footage with us)
Back in July 2019 we ran a story about Moose Lodge and the lake boats operated by the lodge, one in particular was named Miami and the story mentioned that she was replaced in 1939 by a 28’ launch built by Collings & Bell, named Moose.
Now thanks to Greg Philpott we have a 1954 photo of the boat and a press clipping from the NZ Herald dated 7th February 1939 – see below.
Todays woody question is – what became of Moose.
INPUT ex ALAN CRAIG – She has a Perkins now, still on the V drive. And still sound but in need of some loving. photos below
Todays woody – Katipo, is a real mystery, the ‘photo’ above of her popped up on the Old Signs & Advertising fb. Featured was a full page advertisement (refer below) dated Nov 1951 for a company named – Clyde Engineering, head office Wellinton, NZ. They were the agents for the Petter Marine engines.
The ad featured the launch – Katipo, owned by Henry Cotton. Included was the following details – 26’ x 8’6” x 2’ 6” , powered by a 10 B.H.P. Petter marine diesel that gave her a speed of 7 1/2 knots.
Yesterday the A. Couldrey designed / Brin Wilson built launch – Endeavour, slipped back into the water at the Slipway Milford after some serious TLC, still a few jobs to complete on the list and maybe a topsides paint job – but she is looking so smart with her coamings varnished.
On Friday Chris McMullen dropped me a note to say the 34′ steam launch was now running and had just completed its first sea trial. Chris commented the boat is doing hull speed at about 150 PSI but the boiler should produce 250 PSI, but needs some adjustment as the smoke is as a result of the burner not working properly. The hull floats as per the design and the machinery is all working as it should.
I have included below links to past WW stories on the project. If you are time poor, the 2021 will give you an insight into the project.
The John Lidgard built launch – Kingfisher* was built c.1965, her owners Noel / Thora and son Gary Sparnon finished the boat off at the Lidgard shed in Glen Eden. With Noel being a cabinetmaker the fit out was to a very high standard. When launched she was 43’, with a beam of 13’6” and drew 3’6”. Her hull is 3 skins kauri with the 2 inner skins on opposite diagonals and the outer skin full length fore and aft + f/glass.
As launched she was named Avenger and kept at Te Atatu.The Sparnon family did not keep her long because by 1968, the family were living in Paihia, Bay of Islands.
Prior to Avenger there was Olympia II, also built to hull & decks stage by John Lidgard c.1962-63, with Noel S again fitting out the interior – link to previous WW story below. https://waitematawoodys.com/2014/10/15/olympia-ii-2/
Noel S also built the Avenger II after her, having bought a 42′ molded Cookson hull, onto which he added & completed all the varnished teak coamings & interior himself, at his daughter’s property in Avondale, Avenger II was later sold.
Noel S never actually kept any of his boats very long after they went in the water. Kingfisher was quite unique when launched having a fly-bridge styled in to her coamings making it visually part of the boat i.e. not appearing to be an add on or afterthought.
There are still some gaps in her ownership records, Ken Rickets has established that she was bought c.2015 off a policeman who had been living aboard her for an unknown length of time up to 2015, at Westpark Marina, by Richard & Bernadette Schofield. During their ownership they re-conditioned her Ford 120hp diesel engine and Borg Warner gearbox. She was sold c.2018 to her present owner, then Mangonui resident Brett Walford. Now retired Brett has moved to Great Barrier Island and has the boat for sale, still based at Mangonui.
Brett W also changed her name to Kingfisher*, he commented to KR he made the change because as she cruises around 8 knots and this is an ideal trolling speed to catch kingfish.
Both of the last 2 owners have spent collectively large sums on maintenance and upgrading of the interior and equipment, hence she is in very good condition and more or less just as KR remembers her when launched. Keen to fill in any ownership gaps, in particular Noel Sparnon’s son, Garry Sparnon, who may still be in NZ and hopefully he gets to view this story and might be able to embellish it more. (Update – have been in touch with Gary Sparnon , he is still in NZ, father Noel died 3 years ago aged 96. Gary was very happy to read todays story, but has nothing to add. He will however keep a look out for any old photos. AH)
(Thanks to Richard and Bernadette Schofield, and Brett Walford and wife for providing access to the data and images and Ken Ricketts for pulling this story together – edited a lot by Alan H)
The 1953 A Couldrey designed, Brin Wilson built launch – Endeavour , under tent, is coming to the end of her refresh – most impressed with the new name board on the stern – nice touch. The gent in the photo is Luca Beachman, the great grandson of her original owner, Borrie Beachman and has been beavering away on the project – no doubt securing his future path to ownership 😉 More on her here https://waitematawoodys.com/2023/01/27/endeavour-gets-a-birthday/
Just across the yard at the Milford Cruising Club slip – the launch Ngahi, photo below, was being relaunched after an extensive re- fit/refurbishment – hopefully we will see interior photos soon. More here https://waitematawoodys.com/2023/04/10/ngahi-gets-a-makeover/
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 