Category Archives: Designers & Builders

Chris McMullen’s Herreshoff Steam Launch

Posted on by
8

CHRIS MCMULLEN’S REPLICA HERRESHOFF STEAM LAUNCH 


Back in 2014 we did a great story on the 34’ replica Herreshoff steam launch that Chris McMullen is building in his spare time, back then it had been 30 years in the making and now its approx 37 years, but when I called in last week, there had been some significant progress. Have a read of the 2014 WW stories to take in the magnitude of the project – everything , including the steam engine built by hand. When Chris started the project he didn’t have the benefit of the internet or google to help but in recent years he has uncovered numerous old photos that have helped with the project.

Some Background: Herreshoff Manufacturing Co build # 263 was a steam launch called “Cassandra Junior” and Chris believes that is the steam launch shown astern of beautiful 287′ S.Y. “Cassandra” in the photo below, she was stowed on the port side launch of the yacht. The Herreshoff Manufacturing Co built approximately twenty of this type of steam launch in the 27f’ > 34′. The H.M.C build # 227 – Vapor, refer photo below, was 30′ and built for the Steam Yacht “Yacoma” but Chris understands she was never used on that ship. A model of “Yacoma” at Mystic Sea Port Museum shows a steam launch but Chris assumes the ship had a more convenient modern motor boat.  

The last b/w photo below is the tender for the steam yacht ‘Wanderer’  (photo below) called ‘Wanderer Junior’. She was Herreshoff build # 270, she is American and measures 27′ 11″. Built 1909. In the back ground of the photo is the ‘Ida Lewis Yacht Club’.

The engine on Chris’s launch has been run and currently getting a tidy up before being re-installed.
The main reason for the visit was to get an update on the restoration of Haunui, the 1948 Colin Wild launch – happening nearby – check in one Wednesday for that story. I took Jamie Hudson, skipper of Lady Crossley , an almost sister ship, built one year apart, fascinating to get Jamie’s view on the two boats.

WW LINKS TO PREVIOUS STORIES
https://waitematawoodys.com/2014/07/07/chris-mcmullens-herreshoff-steam-launch/
https://waitematawoodys.com/2014/07/11/chris-mcmullen-herreshoff-steam-launch-part-2-the-engine/

H.M.C work shop – unidentified steam launch. 
Cassandra, with Cassandra Junior astern
Vapor with her late owner Jon Martin. Taken late 1960’s
Wanderer
Wanderer Junior – built 1909

IT FLOATS – On 11-11-2021, on the upper reaches of the Tamaki River, Chris McMullen ticked off a rather large item on his to-do list. He launched his N G Herreshoff design Steam Launch. Chris commented that it was just a floatation trial, and that the design floated absolutely level. In the photos below we see her with all her machinery but with no fuel or water. Chris commented that for years he has had the greatest respect for the late Nathanial  Herreshoff and devoted over thirty years (on and off) of his life to the project and is as keen as ever to get it under steam power. You can see, at the link below, the only image Chris has found of the original “Cassandra Junior” see https://www.agefotostock.com/age/en/details-photo/the-steam-yacht-cassandra-1913-creator-kirk-and-sons-of-cowes/HEZ-2696001

UPDATE 04-01-2022 – The below photos were from a shed visit in early Dec 2021, post the above water line test 🙂 click to enlarge

Midnight – Sailing Sunday

Posted on by
1

MIDNIGHT – Sailing Sunday

Today’s story comes to us from Ross Dawson and dovetails with the story earlier in the week on the launch – Midnight II. Both sparked by Ross’s visit to see Peter Chamberlin in this retirement village. I will let Ross tell the story ‘

“The Yacht “Midnight” 34 tons according to press reports of the period, was brought out from the UK and generally under the command of Charles Chamberlin snr., with newspaper advertisements and comments indicated Charles had a paid crew. On the other hand according to Brian & Jan Chamberlin’s family history,…”the cutter ‘Midnight’ appeared on the scene (1853), having been built to Charles’s order by Henry Nicol, a noted North Shore builder.”

There are many newspaper references during the unsettled times around 1865-70, that Charles made the vessel available as an armed cutter, manned by naval volunteers to patrol the Hauraki Gulf and beyond. On one occasion she ‘rescued’ Governor Sir George Grey from potential capture from his Kawau Island home. Another records Midnight arriving in Auckland 4.3.1865 from Tauranga bringing first news of the murder of Volkner near Opotiki.

Other shipping news was more prosaic…”Midnight arriving Auckland from Ponui with 9 bales of wool.”

In 1870, the NZ Herald reported Midnight had a 16 day “stormy passage’ to Tonga, and later the death by drowning of her Captain Courthoys at Levuka. I understand Midnight was lost on this voyage, refer below.

Briefly (& anyone interested can find the full account in the Daily Southern Cross newspaper of 12.6.1871)…”the Midnight sailed from Levuka on Saturday last, on a pleasure trip to Mologai (sic) (Malogai Island)…the vessel was hove to outside the reef for the night, but due light winds and strong currents, drifted onto a shoal about 2.30am. Every attempt was made to get her clear. All anchors being lost. In the morning  a schooner was sighted and a boat was sent over the reef. Mr North, mate of the Midnight asked for a loan of a kedge, or to take a line to a shoal a short distance to windward. The boat returned to the schooner (America) and to the astonishment of those on Midnight, the America made sail and left all hands to their fate. The crew built a raft and with some assistance from a vessel from the island Midnight was abandoned and they made for Passage Island, eight miles away. They were rescued on Tuesday by the schooner Mary sent from Levuka in search of Midnight. It was assumed Midnight slipped off into deep water sometime on the Sunday night that the crew left the stranded vessel. (Story from Fiji Times May 20 1871)

As far as sorting who built Midnight…either in England or by Henry Nicol in Auckland, I have not come across any definitive information. But trawling through the Daily Southern Cross, one is amazed at the large number of ships of all sizes that traded out of Auckland, many locally built.

Henry Nicol who apparently came to Auckland from Scotland aged 23 was an amazingly prolific shipbuilder, initially from a yard on what is now the corner of Vulcan Lane & Queen Street and soon after from his yard in Mechanics Bay, hard up against the slope of the rising land toward Parnell (well before the extensive reclamation extending out toward the current waters edge).

The Daily Southern Cross of 1853 when the 97ton ‘clipper schooner’ “Waitemata” was launched, reported Nicol had built since 1849…647 tons of shipping,…Moa 281 tons;Hawkhead, 22 tons; Eliza, 55 tons;Julia Ann, 28 tons; Rose Ann, 39 tons; Favourite, 28tons; Te Tere, 27 tons; & Waitemata, 97 tons. Not to mention 5 half-decked boats from 10-18 tons!

Possibly Nicol produced the Midnight shortly after the above as the family booklet “Ponui & Beyond” by Brian & Jan Chamberlin states…”In 1853 the cutter Midnight appeared on the scene, having been built to Charle’s (Chamberlin) order by Henry Nicol.

This whole story has a slight personal note as my Gt Gt Grandfather Joshua Robinson, with a team of his carpenters worked for Henry Nicol, although my family record indicates that Joshua was employed by the well known trader William Smellie Graham on his various construction projects, including Nicol’s building of trading vessels for Graham. My Robinson history states…that ” Nicol built 43 vessels in the first 10 years, all work done by hand until 1856 when machinery was installed for sawing timber.”

Just to give a glimpse of Nicol’s work ethic….The DSC of 24.2.1854 tells us…”launch schooner 40tons, Tamatenaua. Cutter 30tons nearing completion. About to lay keel for schooner 112-120 tons”….all with saw and adze…the chips must have been flying!”


Harold Kidd Input – MIDNIGHT was built by Henry Niccol in 1863 according to the Register of British Ships No 57810. She replaced Charles Chamberlin’s VICTORIA.

Would It Float

Posted on by
6

WOULD IT FLOAT

Sometimes you have to ask yourself – is the photo for real or has it been ‘photo-shopped’, well woodys I can tell you this ones for real. But would it float?, does the builder ever intended taking her out to open water? I think we can assume that the owner was a serious DIY’er and not an actual boat builder. Kind of reminds me of a ‘boat’ at the Te Atatu Boating Club in West Auckland, but a whole lot un sea friendly.


MARINA WANTED – 12m+ Temp Only

One of our passionate woodys is looking for a 12meter+ marina in the Hobsonville / Bayswater / Westhaven area. Upwards of 6 weeks. Its a woody returning to Auckland and they need to park her while they sort out a more permanent home. Email me at  waitematawoodys@gmail.com  if you know of anyone hauled out for winter etc.

Imatra And Her Builders Story

Posted on by
26
Tamaki River, Auckland

IMATRA And Her Builders Story

A little while ago Mark Erskine wrote in regarding the 123 year old Stow & Sons gaff yawl racing yacht – ‘Imatra’ which was sailed to New Zealand in the late 1930’s or 40’s and purchased by the then Mayor of Auckland. Mark used to give her a passing glance on his travels, she is berthed in the Tamaki River,  but over the last few years he hasn’t checked but I can confirm that she is still barely afloat. The last time Mark saw her she was in poor condition, at the time owned by John Hayman, we are unsure who currently owns her. Can any of the river rats enlighten us on the status of Imatra?

Mark also supplied a link to a Youtube video on Stow & Son, master boat builders.  https://www.youtube.com/watch?v=VBBVcrmj9qE It gives wonderful insight into just how remarkable their productions were / are. Very humble boat sheds, humble tools, all yachts made by hand, but by craftsmen from the best quality seasoned timbers (oak frames seasoned for up to 16 years, mahogany, rosewood, walnut, pitch-pine, teak, etc) and the sheer quantity of huge, high quality racing yachts and boats made by this firm boggles the mind. The production numbers don’t seem possible for the size of the business, and clearly shows this company were at the very top of their game.

A few Stow & Sons yachts survive fully restored and are worth millions. 

If you Google:

  • “1904 Rosalind yacht”
  • “1913 Harbinger yacht”  Sadly, “Harbinger” was lost at sea a few years ago. 

Input From A WW Reader

The Imatra article today jogged my memory. Imatra was designed and built with a gaff yawl rig and was sailed to NZ in that configuration (see photo) below. Much later, she was modified to her current rig here in NZ. Current owner, John Hayman claims the modifications were carried out by a young Peter Blake, after Hayman damaged her magnificent timber main mast. The current alloy mast looks very much out of place and just adds to the current distressed condition of the yacht. Hayman was also responsible for the awful cabin addition. He claimed the construction was carried out at Baileys. The original rear (aft?) mast postion behind the rudder post was also removed and brought forward of the rudder post. Hayman claimed this was also by “Blakey”.

The yawl ‘Imatra’ under sail, 1913. (Photo by Kirk and Sons of Cowes/Getty Images)

Input From Harold Kidd – IMATRA left England for NZ in December 1948. Ernie Davis bought her in 1949. L.J.Fisher owned her later then A.M. Jenkinson (1964) then Jack Hayman. SOMEONE’S GOT TO DO SOMETHING!


Input From Russell Ward – I crewed on her Christmas 1964 when she was owned by seafarer and car dealer Arthur Jenkinson – He was a mate of Athol Rusden and is mentioned a lot in the latter’s autobiography “Rascal of the Pacific” It is a cracking good read and puts him in perspective. Athol had the 60’ woody Paulmarkson built by Percy Vos in 1970. She was renamed Dionysus RIP.
Jenkinson had pulled the masts out and was rebuilding them when I crewed. He said he was re-gluing parts so I guess there was rot.  She was substantially original below – lovely paneling etc etc. I think she had a piano aft end of the saloon. Wasn’t much for me to do since we motored everywhere.Arthur reckoned she had too much lead aft and that the engine (a Lees 100 hp Ford) ballasted her too much aft. I last saw her on one of the slips at St Marys Bay a year or so after and Arthur was gas axing and hacking a large piece of lead off the aft end of the keel by the rudder post –would have been a ton or more. I lost touch with her after that and she seemed to spend most of her time up the Tamaki. The boxy cabin aft was quite a fine piece of woodwork but the original doghouse was lovely.The picture below is of her at Cooks Lower Landing alongside Skip Lawler’s ex RNZN Fairmile – Ngaroma

27-11-2022 UPDATE – Have just been flipping thru some old ‘scrap books’ of NZ yachting press articles and came across the below – the 1st is dated 30-07-1974 ex the NZ Herald

The bottom two are ex Sea Spray magazine June 1978 edition

03-03-2025 INPUT FROM A CONCERNED BOATIE

Photo below of the vessel Imatra which is looking in a sad state in the Tamaki river.

It is lying on its side so when the tides in its half submerged in water.

Seems a sad end to a boat that’s probably one of the oldest in New Zealand.

Spirit – The Waitemata’s Newest Woody

Posted on by
5

Spirit – The Waitemata’s Newest Woody
Over the Easter break Olaf Wiig and family headed out to Great Barrier Island on the families classic launch – Margaret Anne, photo below. Margaret Anne is a very smart looking woody but this trip she was overshadowed by a new addition – Spirit a 2.4m dinghy that Olaf built at the NZ Traditional Boat Building School. Spirit is a rowing version of the 2.4. dinghy (prototype number 4) of the boats that the NZTBS are hoping to form the basis of a modern Wooden boat building course. Olaf is a trustee at the school and as you’ll see looking at the dinghy a very talented gent.
Olaf built this one as a first boat for my daughter and she chose to call it Spirit. 


On the subject of the New Zealand Traditional Boat Building School , I called in on Tuesday and was saddened to see the team packing up as they have to vacate the building due to funding issues – hopefully the school will reappear one day soon as part of the elusive waterfront Vos boatshed project, probably squeezed in between dragon boats and waka ………. I’ll leave the room now 🙂

Margaret Anne & Primadonna

NZ’s Finest 50′ Classic Motor Cruiser – 4Sale

Posted on by
3
Arohanui Interior Video Tour

NZ’s Finest 50’ Classic Motor Cruiser – 4sale

When you step aboard the 50‘ Arohanui you feel the warmth that comes from 50+ years of tender loving care and consideration.

Built using the finest materials available – NZ kauri and Burmese teak, her planks were later glassed over, this undertaking when combined with the varnished (uroxsys) cabin gives Arohanui the resilience of a modern f/glass vessel. Arohanui was designed by A. Donovan (with significant reference to the the Hacker Boat Company, USA designs of the same period) and built by the Lane Motor Boat Company and launched in 1965 – she featured on the cover and was the lead article of April 1966 issue of Sea Spray magazine, the magazine described her as a twin screw diesel gentlemen’s motor yacht. Arohanui was built to comply with Marine Department survey requirements. 


A brief overview – 50’ LOA – 13’6” beam – 3’5” draft, 3 double private cabins + 2 berths in saloon, 6’4” head-room. Powered by twin 300hp Iveco engines. Cruising speed – 15knts – Max – 20knts. And the most impressive Lithium battery power management system I have seen. Her inviting interior is aided by a central heating (diesel) system installed in 2017.


In 2015 she underwent an extensive refurbishment at Lees Boat Builders – view video below to experience the attention to detail and standard to work.A full list of her inventory and specifications is available to likely buyers. Private viewing by appointment only. Contact waitematawoodys@gmail.com 


If you have a serious interest in Arohanui, I suggest to go onto trademe and enter the following criteria – boats, fibre-glass, twin inboard, 14>16meter – and review what one would pay for a white plastic floating apartment of a similar size and spec, then come back and take in Arohanui again – then be quick with your reply 😉 

Royal Saxon – 1989>1994

Posted on by
1

Royal Saxon 1989 > 1994
The top photo made a brief appearance on Lew Redwood’s fb and Nathan Herbert correctly ID’ed the launch as the 33’ Colin Wild, 1930 built – Royal Saxon, anchored in Islington Bay, Rangitoto Island. At the time I would suspect she was owned by Rick McCay (MV Luana), so sometime between late 1980 and 1994, when he sold her. These days Royal Saxon resides at the top of the South Island, at Motueka. The WW link below and comments section will tell you all about the boat and how she ended up down south. 

The 2nd photo I took 2 years ago of her anchored at Kaiteriteri, when we were on-route to the Abel Tasman National Park. Fantastic to see her unchanged after 30 odd years, another example of how beautiful Colin Wild’s designs were and how most remain so today 🙂

Royal Saxon


There is a great WW Royal Saxon story of a 1939 big game fishing cruise at Mayor Island, Bay of Plenty – told by Harold C. Clark. Great reading

Royal Saxon 1939 Game Fishing Cruise 

15-03-2021 Input From Mark Newcomb – I am pretty sure I recall being a young boy on a trip from Tauranga to Mayor Island on the launch Royal Saxon. It must have been the mid 1950’s, and I had thought the launch belonged to Arthur Honeyfield, a well known farmer and businessman who had a lovely farm at Kauri Point(?) near Katikati. Honeyfield was a member of the Tauranga Harbor Board and had somehow managed to get a substantial wharf built near the farm for easy access to the inner Tauranga Harbor. We embarked on our journey from this wharf. I recall a lodge on the island at SE Bay, not sure if we stayed there or on board. I still have some obsidian that I found on the island.
It is entirely possible that Royal Saxon was owned by a friend of Arthur’s, or was on charter.
Sadly, the son John Honeyfield, died last week, so that avenue of follow up has gone.

CYA BUMPER BOATS – I hear that during race one of the Classic Regatta the other week, the A Division boys were playing silly buggers again. At the start 3 of of the ‘stars’ of the A Class fleet all got hooked up on the start line and ended up all doing an unplanned buffalo girl 🙂

Koputai – Work Boat Conversion

Posted on by
1

KOPUTAI – WORK BOAT CONVERSION


Requests for info on boat on WW can be a lot like paying the pokie machines – you ‘feed’ the machine and pull the handle – sometimes it spins and nothing comes up, most of the time we get a small payout, just enough to keep us motivated to keep playing – then sometimes you hit the jackpot.

Today’s story is a jackpot pay out – starts like this – over the last 5>6 years the 1939, 56′, Miller & Tunnage built – Koputai has popped up on WW and we have been trying uncover more of her history. Back in May 2015 she was for sale and the then owner, the late, Louey Sandiant told us everything you would want to know about the photo + photos. Then in Sept 2020 Keith Foster, who purchased Koputai off Louey contacted WW and supplied some updated photos and a request for any further intel on the boat.

It took a few months but Matt Siddells made contact and advised that his grandfather – Russell Bramwell purchased Koputai as a retired pilot boat and did the conversion to pleasure boat. Matt has very kindly shared the gallery above of photos from the family album. You can see and read more about Koputai at the WW links below


2015    https://waitematawoodys.com/2015/05/03/koputai-sailing-sunday/
2020    https://waitematawoodys.com/2020/09/06/koputai/

Lock-down Treat ~ Free Access To The Worldwide Classic Boat Show

Posted on by
3

A LOCK-DOWN TREAT – FREE ACCESS TO THE WORLDWIDE CLASSIC BOAT SHOW


Our friends over at Off Center Harbor have been orchestrating a new gig on the classic boat scene – a virtual worldwide classic boat show. Its been live now for 10 days and only available via purchasing a ticket (US$5) – now woodys to help us kiwis (and the WW overseas followers) during CV-19 lock-down – the show is now free.

See below instructions on how to visit the show. 

You can use the globe / map to see an amazing collection of vessel around the world + locations of museums & trade folks – but the real gem for me is the daily video presentations from some of the worlds leading lights on the classic boating scene – sailors, teachers, photographers, event promoters and boat builders. You will be addicted so I apologise in advance for ruining your day/s – but, you’re supposed to be in lock-down 🙂

If you only watch one presentation – make it the legendary Tom Cunliffe presentation – you’ll find it on Sat Feb20th under the heading ’Seas of Northern Europe’ – do not be put off by the boring title – its a cracker, the mans one of the best storytellers around, you’ll be glued to the screen for 2 hours. ENJOY THE SHOW 🙂

How To Get Your Free Ticket:

1. CLICK HERE to get your free ticket (here is the full link if you need it: https://classicboatshow.com/product/one-free-ticket-for-full-access-to-the-worldwide-classic-boat-show/ )

2. Checkout for free, and your username and password become your ticket

3. To login, go to ClassicBoatShow.com, click login in the top right corner to get full access, and enjoy the show!

If you have trouble getting your free ticket, you can always email the show’s crew for help at crew@classicboatshow.com.

If the show turns out to be an enjoyable and valuable experience for you, they have a voluntary “tips/donations” button on the top of the screen where you can contribute.

Gelyce

Posted on by
1

GELYCE

Totally Over The Top Restoration – But OMG – Stunning 
Today should have been a big sailing story, around the CYA Classic Regatta, but weather and CV-19 killed that. Race Day 1 (Saturday) was a bit of a fizzer with little wind, resulted in two shortened races and then Saturday nights announcement on CV-19 levels killed the remaining two days – so time to pull something out of the hat. Actually easy – when I was scrolling thru the guys at Off Centre Harbors latest virtual  gig – the Worldwide Classic Boat Show I came across – Gelyce, a 1930 50’ ex J-Class tender, designed and built by Camper & Nicholson, Gosport, UK. A quick google search told me a lot more about the launch and the amazing restoration – more here http://www.gelyce.co.uk
Its a great story and stunning commitment by her owners to bring her back for a near death to being one of the UK’s finest craft. I’ll let the owners tell the story – the gold plated fittings and Rolls Royce engine are OTT but perfect.

“The history of this famous vessel makes her possibly the most unique yacht tender and spectating boat in the World. She was built in 1930 by internationally celebrated 200 year old builder of world-class leisure and sports craft Camper & Nicholsons (C&N) of Gosport, UK and provided to Sir Thomas Lipton with the legendary J Class Racing Yacht Shamrock V. Upon Lipton’s death in 1931 both were taken on by Sir Thomas Sopwith, for whom C&N also built the America’s Cup challenger Endeavour. “Gelyce” was also used as Endeavour’s tender to transport guests to ‘the big boat.’
This sublime 50ft example of the Gelyce Class (official no 160934) is the only one of the series used as a J Class Yacht Tender. C&N built only nine of the 50ft Gelyce-class boats all in the period from 1912 to 1930, several of which were for the use of Nicholson family members. Indeed, “Gelyce” itself remained registered to C&N for seven years through the 1930’s. The Gelyce class of boat was thus always rare and exclusive and is now even more so with only three surviving.
“Gelyce” was the last built of the class, pre-eminent in terms of its provenance as the only one to be a J Class Tender. The name Gelyce is an amalgamation of the Nicholson brother’s wives names – Gertie, Lucy & Constance.
“Gelyce” has now completed a restoration of unprecedented quality and with her impeccable history is sought after in the growing classic yacht racing fraternity.
She has undergone a complete restoration of the hull, using three layers of structural mahogany veneers laid in double diagonal then carvel, fastened with modern epoxy and 75 thousand polymer staples.
The entire superstructure and interior has been retained and refurbished. The instrument panel, morse control, all deck, cabin and head fittings are Welsh gold plated for easy care.
Her engine is a concours condition aluminum mid-1960’s Rolls Royce, producing 175hp, which theoretically gives her the capability of 28knots at sea. The engine was restored and marinised by Brian Bax at Tim Walker Restorations.
Exquisite “Gelyce” has been lovingly restored by Classic Restoration for with her owner, Wint Taylor. “

photos below as found