Miami > Queen Victoria

Miami > Queen Victoria

I have a few questions re the above photos. To be honest, I’m a little confused so I have drafted the details below from info supplied ex her current owner and ask that those of you with more / better knowledge than me, give me feedback.

In 1915 Dr. Rayner of Moose Lodge, Lake Rotoiti, commissioned the Bailey Boatyard in Auckland to build a launch named ‘Miami’, when Rayner sold Moose Lodge to Sir Noel Coles Miami was replaced with the 28’ launch – ’The Moose’. The Moose was built in Feb 1939 by Collings & Bell. The Moose is shown in the top photo being transported to the Lake. The next two colour photos I believe to be the same launch at a later date.
The next three photos show the launch Miami, now named Queen Victoria, that Lake Rotoiti boatbuilder Alan Craig is about to start a re-furbishment on, during this work her Yanmar engine will be rebuilt. Her current owners in 1985 replaced her Redwing engine with the Yanmar, this being her 3rd engine – previous owners, the Armstrong family of Gisborne Point, fitted the Redwing during their ownership period. Bob Armstrong is on record as saying the launch was hard to moor and had a history breaking away which resulted in the Armstrong selling her to an unknown person, who kept her on Lake Rotorua for approx. a year.
Miami was then purchased by the Lewis family of Te Puke and kept at Otaramarae near the Harris boasted. Many years later it was sold to Bert Goulding a Tauranga surveyor, who kept her in a boatshed in Te What Bay next to his lake house (house now owned by ex MP Mr McLean)
Miami’s present owners had always admired her and regularly enquired if Bert Goulding wanted to sell the launch – his wife always replied “not ready yet”. Then in 1979 at the grand old age of 93, Bert Goulding decided it was time to sell. Her present owners jumped at the chance and purchased her. In 1985 she was sent to a Tauranga boatbuilder (Bill Visser) and altered to what we see today.
So woodys – is the above story factual and can anyone supply photos and more details on the past life of Miami > Queen Victoria ?
Input from Harold Kidd – The top left pic is OKATAINA built by Sam Ford in August 1938 for Beamish-White of Okataina. (oops – since moved to the bottom of this story. AH) The top right pic is MOOSE; same Ford truck though!
As for MIAMI, I just can’t find her being built by Chas Bailey for Dr. Rayner although 1915 had a lot more news going on than pleasure boating! Gallipoli, for example.
The first mention I have of a launch MIAMI is in 1924 when she was owned by G W & E L Best of Tennyson St., Northcote. She appears to have been sold to Whakatane in 1927, owners H West, F Prideaux and D McKenzie. In 1937 -1940 she was owned by H Dunton of Bowentown. Maybe she gravitated to Rotoiti from there or maybe there was another MIAMI at the same time?
The Bests had another MIAMI themselves in the 1950s.
I suppose Dr Rayner would have used the name MIAMI for a launch as, apart from being an enterprising dentist with his “American Dental Parlors” in Auckland, he was a developer of resorts like Turangi, Rotoiti etc obviously inspired by the contemporary conversion of Florida sandhills into the resort of Miami.
Just the same I’m eager to establish his connection with the launch MIAMI.
Screen Shot 2019-07-01 at 9.25.33 PM

Edith

IMG_0807

IMG_0806

EDITH

I was recently contacted by Vanessa Bailey in regard to her grandad parents displacement picnic boat Edith. Edith has been restored in a shed at Diary Flat by Arthur Nealy and Dominic Happe over the last 2+ years. Edith is a kauri clinker build and launched in 1925, 16’ in length.

During the restoration Edith her was paint stripped back to bare wood both internally and externally then coated with 5 coats of marine paint, a new Nanni diesel engine was fitted (est. speed 8 knots). In addition new fuel tank, new electrical, new propeller shaft and new propeller was fitted.

I have asked for some photos of the project, so hopefully we can see the work involved in bringing this beauty back to as launched (or better) condition. Congratulations to all involved.

Check out the very impressive trailer (below)

IMG_0428

 

Miss Sandra (Kokiri)

Screen Shot 2019-06-23 at 10.08.23 AM

Screen Shot 2019-06-23 at 10.08.12 AM

MISS SANDRA (Kokiri)

Today’s woody comes to us via Greg Philipott’s fb page. Greg commented that Miss Sandra was built c.1962, probably in Auckland (tbc).
She was named after Lola and Snooks Fuller’s daughter. Then renamed Kokiri after NZ Shipping / P&O purchased Fullers from George Wooller.
Chris Brittain commented on the fb post that Fullers repowered her with a GM 671.
Nathan Herbert also commented that her hull looked like an early Jim Young design.
Greg is keen to learn more about Miss Sandra. So woodys any details, stories, photos?
Input from Graham Clifford
“I was a full time skipper of Miss Sandra from 1967 – 71 when she was engaged in big game fishing, light tackle winter fishing and occasional runabout duties.  I continued my association with her on a piecemeal basis in the years after she retired from fishing in 1971 and took her new name “Kokiri.”  Under this name she was used variously as a scenic cruise boat,  a pilot boat to and from ships visiting Port Opua and a general roustabout.
Miss Sandra was a 36 foot Vindex hull built of kauri in Fullers new slipway shed at Russell in 1966.  I was present during her construction.  In late ‘66 I took over as her gamefishing skipper.  Together we captured a 547 pound blue marlin.  The following season, in March 1968,  we landed and weighed the biggest marlin caught in New Zealand waters, a blue marlin of over one thousand pounds (1017 lbs)
Miss Sandra was originally powered by a 6-cylinder Fordson diesel but was soon repowered with a Caterpillar turbo charged engine which gave her a top speed of 20 knots light. I used this engine for more than two years.  In 1967 I used Miss Sandra and her speed to assist Police in the transfer of a stabbing victim from a ship which arrived in Doubtless Bay. The victim (Wylie Hanby Roberts) needed hospital treatment and would have certainly died had the ship not diverted to Doubtless Bay.  Miss Sandra had the speed to get from the Bay of Islands to Doubtless Bay in time to meet the ship offshore.   The Caterpillar engine was replaced in 1969 with 6 cylinder Fordson and again with another Fordson.  Her final re-powering was with a noisy GM which coincided with her name change to “Kokiri.”  Her gamefishing days were over.  She became a part time scenic cruise boat fitted with airline-style seats and a small public address system.  This role did not suit Kokiri well and I personally shunned her other than to favour her for pilot duties.  The two principle maritime pilots liked her for her speed.”

PIKO – A peek down below

Screen Shot 2019-06-23 at 7.33.05 PM

Screen Shot 2019-06-23 at 7.40.25 PM

Screen Shot 2019-06-23 at 7.38.57 PM

PIKO – A peek down below
Piko was built in 1924 by Collings & Bell and is 28’ in length, with a 6’ beam and she draws 2’.
Power is from a 2002, 18hp Volvo diesel.
Her current home is on Lake Rotoiti (Nth Is.) She has made numerous appearances on WW before as part of the annual Lake Rotoiti Classic and Wooden Boat Parade.
She has just popped up on trademe with a very realistic price of $15k, needs some TLC to the interior but nothing most of us couldn’t do.
Interested in hearing more about her past life i.e. has she always been on the lake and if not where has she been over the years.
Harold Kidd Input – PIKO was built in Parnell in September 1927, designed by and built under the supervision of H.N. Burgess, formerly boatbuilding in Judges Bay. Her first owner was J Bates. She had a Briscoe heavy duty engine. Bates kept her at Judges Bay. Not Collings & Bell.

Murray Deeble Input – She was on a mooring off Akarana prior to being transported to Tauranga/Rotoiti in the early 90’s

Lady Ellen Restoration June ’19 Update

LADY ELLEN RESTORATION UPDATE – JUNE 2019

Just received the above photos and story below from Bruce Mitchinson, as before, I’ll let Bruce talk you thru the report.
“Over the weekend we cleared out the boatbuilders shed ready to lay out the plywood cores for the cabin coamings, which are to be clad in Iroko inside and out.

This is the last of the major woodworking, apart from the engine box and associated trim and accessories, and fitting the coamings back on the boat.
Galley is complete ready to go in after the interior paint job.
Below deck the cabin woodwork is done and ready for paint, which is all white, with varnish door frames and jambs.

Unfortunately our painter has a hand injury so we are on the lookout for a new painter at the moment. 

We also lost our engineer, Ken Jaspers, who looked after our engine through its recondition, sourced all the new parts and running gear, and had things primed ready for assembly and paint.
Ken battled bone marrow cancer for the last year and was still working on our job up to a week before he checked out.
There will be a plaque for Ken, ‘Engineer to Lady Ellen’ that will go on the bulkhead in the engine bay. 
The trailer and engine which became a feature in Ken and Eileen’s driveway for over a year, is now up in the boatyard, ready for Brian to finish the assembly.
All the finished parts are stacked in the shower cubicle in the shed, ready to bolt on.
 
Still a lot of work to do, but it looks like a boat now.”

Rangi Rua (Rangi II)

 

 

IMG_0155

RANGI RUA (Rangi II)
 
I was recently contacted by Terry Hall in regard to his ex yacht Ranginui Rua, Terry commented that when he bought her she was named Rangi II (as seen in the sailing photo above) but when he tried to register her with Lloyds – London the name was refused as there was a passenger  ship with that name,  Terry had a Maori friend, a chief in Northland who suggested trying Rangi Rua –  Rua being #2 in Maori, he sent this off and it was accepted. Thence the ‘different’ name on the hauled out photos.
 
Rangi Rua was built by Mark Anthony in Freeman’s Bay and is a Woollacott 42′, Terry believes it was extended with extra frames. Her and a gaff rigged boat called Marpu were probably the last kauri boats to be built in Freemans Bay. Bad luck followed both yachts – Rangi Rua was lost in the Trans Tasman race in 1948 and Marpu was lost in the Pacific on its way home from Japan.
 
Terry owned Rangi Rua for many years and had her moored in the Town Basin in Whangarei in front of the wharf shed. He still has the log book which he kept when he sold her. In the photos of her on the slip, Terry is in the white overalls with his boatbuilder son, Frank and crew.
SUNDAY QUIZ
Yesterday Angus Rogers was doing what most of us were doing i.e. nothing 🙂 so he took an old photo out of its frame to clean the glass. Do we think Angus has ID’ed the yachts correctly ?  Sail numbers starting with A17 Ngatoa on right working left are A11 Ida, A5 Rawene, A3? Ariki and A16? Little Jim. Some of the anoraks may be able to identify the last two from their sails and shape and the yacht on the right with no numbers showing.
IMG_1769
 

The Launching of Margaret A

Screen Shot 2019-05-11 at 7.20.05 PM

Screen Shot 2019-05-11 at 7.19.24 PM

Screen Shot 2019-05-11 at 7.19.10 PM

The Launching of Margaret A

The photos above show the motor boat Margaret A being launched at the Whangateau boat yard. The caption states that Rose Aitken is the one breaking the bottle over her bow.
The photos are ex L Sisson’s ‘Leigh historical photos’ via Lew redwood’s fb.
Can we expand more on MA in terms of year launched, her length etc and what became of her?

Felicitare

Screen Shot 2019-05-23 at 2.37.49 PM

20190516_135550

FELICITARE

The 40’ classic charter launch Felicitare has made a cameo appearance on WW and at the time John Wicks commented that Felicitaire was built on “spec” by Alec Baxter (in Whangarei) and intended to be a fishing boat. No buyer had appeared by the time she was planked up, so he finished her off as a pleasure boat for himself. John was aboard with him shortly after her launch, and he admired her immensely. After cancer claimed Alec, her second owner put in an even larger Gardner, a 6LX replacing the original 4LW.

These days she is in charter and very well cared for. I was sent the photos of her engine being extracted by Cameron Pollard (Sefton Diesel), who commented that the 6LX has been in the boat for exactly 21 years of faultless service and Cameron is fitting a refurbished 6LXC for her owner.

 

 

The Launching of Eileen Patricia – 1933 classic motor boat – 50+ photos

P1060140

 

P1060128

P1060195

P1060159

P1060163

 

P1060198

 

IMG_1255

IMG_1258

 

 

 

 

IMG_1262

THE LAUNCHING OF THE CLASSIC WOODEN MOTOR BOAT – EILEEN PATRICIA

It was an early (8.30am) start yesterday morning for the classic woodys that gathered to witness Jenni & Peter Mence re-launching Eileen Patricia at The Milford Slipway (ex Geoff Bagnall yard).
The 1933 Arnold Couldrey designed and built motor launch has just undergone a 4+ year restoration at Marco Scuderi’s – MCN Shipwrights yard.
WW has followed the restoration and the links below will take you back to her early days (as launched) and as ‘rescued / saved’ by Peter, thru to leaving Marco’s yard.
The weather forecast didn’t look good, but as always for classic woody events, the sun shone at the right moments and Eileen Patricia was launched in a style befitting a 86 year old lady – Jazz band + Champagne and scones.
Several guests arrived in period costume and the ‘Best In Show’ ribbon would have to go to Paul Powney who sported an original Auckland Motor Yacht Club blazer (photos below).
A special touch was the attendance of several descendants of Eileen Patricai’s builder A. Couldrey.
Links to older WW Stories on Eileen Patricia
The Big Event Launching Video (turn up the volume, nice music)

 

Two of our finest woodies My Girl and Pacific were on hand to escort Eileen Patricia out of the marina and home to her new marina.
Best In Show Ribbon Winner 

 

Update – video footage of Eileen Patricia underway just after launching. Ex Nathan Herbert.

Update2 – Link below to the restoration – amazing collection / essay of the total restoration – a must view

https://www.mcnshipwrights.com/eileen-patricia.html

Update3  – Video of Pacific, Eileen Patricia and My Girl leaving the Milford Marina / creek. Sent in by Paul Powney.

Restoration of Te Uira begins

FB_IMG_1539727408050

20181016_081930

 

FB_IMG_1539641729372

RESTORATION OF TE UIRA BEGINS 
 
Pleased to announce that the restoration of 45’ C & W Bailey built (1896) Te Uira has finally begun in Australia.
During the week I was contacted by Colin Grazules with the news – I’ll let Colin tell you the story.
 
“We have constructed a new wee shed to house the old girl and the steel and iron keel has been removed.
At this stage we are envisioning that the restoration back to her original condition should take 2 to 3 years all going well.
The owners wish is to return her to as close to her launch configuration as possible.

We will begin by removing the ribs that were added to stop her leaking in 1898.

But we need your help.

We need if possible a detailed plan of where the original stringers were installed and the triangular beam that sat on top of the floors?
A plan or photos of what the original keel would have looked like would be greatly appreciated.
I have a copy of Robert Brooke’s book ‘Beautiful Boats’ but unfortunately the plans in the book have little detail on this. 

A deck plan would also be of great assistance including including where the original mast step would have been installed etc.

Well this is just the start and I’m hoping this will become an ongoing conversation to ensure that we can do justice to Te Uira and her heritage!!

I intend to post the restoration on the NZ Classic Yacht Forum and on the Cygnet Wooden Boats FB page and will keep you appraised of the progress.”

 

Below are two videos of the keel removal.

Previous Input From Harold Kidd

TE UIRA (usually shortened in Oz to UIRA) was built by C.& W. Bailey and launched on 17th October 1896 for Gidgeon Palmer of Melbourne as a 5 rater.
She was taken across by the steamer TARAWERA with Chas. Bailey Jr going with her to settle her in.
She was quite successful in Melbourne but came up against SAYONARA, the bigger Fife-designed cutter.
She raced in Melbourne with the St. Kilda club for many years, converted to a Marconi rig in 1925.
 
You can also eat / see more here  https://wordpress.com/post/waitematawoodys.com/13298