Category Archives: Boat Sheds

Stargazer

Posted on by
Reply

20200208-_DHW9454

20200208-_DHW9457

IMG_0054

STARGAZER

Several woodys (Barbara Cook – Waitemata, and Dean Wright – Bay of Islands) have sent in photos of Stargazer mooching around our waters.
Stargazer is a tender to a sailing super yacht. For us Kiwis calling a 75’5’ vessel, powered by twin 925hp Scania engines a tender is a bit of a stretch 🙂 but with the upcoming Americas Cup regatta we will be seeing a lot more of these beasts in and around the Hauraki Gulf.
Stargazer was launched in 2019, built by Claasen Shipyard and their sister yard Vitters Shipyard working with the navel architects – Hoek Design.
Built from aluminium, she has a beam of and draws 4’9”. The twin Scania engines give her a top speed of 25 knots, but most Stargazer cruises at 15 knots. But Barbara reports she easily pulls two water skiers.
Link below for construction details and photos.
Screen Shot 2020-02-11 at 8.10.17 PM
WBB0003_Banner-980x160

Riwaka Woodys

Posted on by
2

IMG_4827

IMG_4829

IMG_4828

IMG_4830

RIWAKA WOODYS
 
My woody spotter in the Nelson area, John Burland, recently sent in the above photos from the Riwaka Inlet.
The top photo is of the 36’ Varlene, built by Supreme Craft c.1940’s. She has made several appearance on WW and I last saw her in Torrent Bay, Abel Tasman National Park in early March 2019 (photo below)
 
Can anyone ID the very smart launch alongside her in the 3rd photo?
 
The work-boat it Tina, built in Wellinton to service the Flying Boats, but never did. Spent a chunk of her life pushing logs around the Sounds. Has called Riwaka home for the last 8 years.
Screen Shot 2020-02-04 at 5.37.12 PM
 
 
WBB0003_Banner-980x160

Katherine

Posted on by
3

IMG-7260

P1080052

IMG_0920

KATHERINE
 
Today woodys you are looking at what the future of classic boating could look like. Allan Hooper’s Katherine was built / launched in 2013 by Conrad Robertson at the Robertson yard in Warkworth. Her hull is glass, with a wooden top (from the green section up). The mould was taken from an old hull that was found in a shed on a farm on the Hokianga Harbour. It is apparently an old tug that worked on the Hokianga a long time ago.
The original hull was refurbished at Robertson’s and a mould taken off and is now lying in the basin at Warkworth. It was fitted out with a steam engine and run as a charter boat until the boiler failed, unfortunately Allan reports it is looking a bit sad.
The designer is unknown but Conrad designed the rest of what is Katherine. Since purchasing her Allan has designed and added the rig and quite a few more mods and improvements.
 
I went aboard several years ago at Mahurangi and she is a very cool boat. Huge volume below, powered by a 60hp Lombardini and sound proofed like a Airbus 340. She measures 38’ loa, with a beam of 9’6” and draws 3’. The Lombardini pushes Katherine along at a comfortable cruising speed of 7.5kts. 
The construction of Katherine is several steps up from the earlier Logan 33 f/glass replicas.
 
In the hauled out photo, taken Dec 2019, she was getting a lick of paint. In the last few months I have spotted her at Patio Bay, Waiheke Island and at the Mahurangi Regatta. On my WW story re the Mahurangi Regatta, Kartherine received some very favourable reviews from the woodys on the WoodenBoat Forum in the USA. “Like that, vertical stem, raised deck, spoon stern. What else would you want.”
 
The very smart tender, is a Townson design, built by Allan at the NZ Traditional Wooden Boat Building School. More on the dinghy soon – you may be able to build one yourself at the School, fingers crossed 🙂
(photos ex Colin Pawson, Allan Hooper & myself)
 
THE WAITANGI DAY WOODY PICNIC IS SHAPING UP TO BE A GOODY – 18 BOATS CONFIRMED ALREADY
If you have not RSVP’ed – time to get off the couch and do it 🙂 email to address below. The venue is – Waikalabubu Bay, Motutapu Island.
waitematawoodys@gmail.com
Woody Waitangi Picnic
WBB0003_Banner-980x160

Mandingo

Posted on by
4

IMG_4988

MANDINGO
Chatting recently with Sam Douglas he mentioned he owned a Max Carter 18’ runabout that he was restoring, obviously I asked for details – below is Sam’s reply.
 
“Launched in 1959, Gerry Gowan commissioned Max Carter to design and build this 18 foot outboard runabout to his specification. As far as I can tell she is kauri framework, solid mahogany trim and mahogany ply. Sometime in the 1960’s she was fiber-glassed to the chine. She has had about 5 outboard changes in her life, starting with a 40hp Johnson and ending with her current 1970’s Mercury 800. It is believed she was the first one of her kind and possibly an extended version of some earlier, smaller Max Carter runabouts. There is believed to be one other boat later built to the same design but Mandingo is the original. She remained unnamed until sometime in the 1970’s when the OBC, where she was a member, required all boats to be named. At the time one of the family was reading the controversial novel ‘Mandingo’ and so somehow the name stuck. Used extensively for cruising and fishing the Hauraki gulf, often to Tiritiri and Rakino she later took up residence at the family bach at Rotoiti where she stayed until the late 1980’s when she was sold to a family friend in Turangi where she resided until early 2018 when I purchased her and brought her back to Auckland.  
 
She had been sitting unused in a shed for 15 years. Unfortunately at some point said shed sprung a leak, dripped down onto the deck and fresh water had left a tide line in her bilge. I bought her as a project site unseen and made the journey down to Turangi early one morning to collect her, not entirely sure whether she’d happily be coming back up with me. The trailer also hadn’t been moved in anger all this time but I was informed it had been driven a few hundred meters recently in order to have one tyre replaced (the other is still the original radial). Aside from the obvious downsides of fresh water and wood, what I did find on arrival was that the fresh water of the lakes where she’d resided for the latter part of her life had been very kind to the custom built trailer and the main outboard as well as the original 1950’s Seagull auxiliary looked in great condition and still turned over freely. The light board too plugged up and worked perfectly. So, with nothing to lose I nervously begun the journey home and with frequent stops to check such things as heat in the bearings and a lot of time spent looking in the mirrors to see if a wheel had yet fallen off, made it back to Auckland incredibly incident free that afternoon. (photo below)
 
She now resides less than a km from where she was originally built, in a shed in my backyard where I am trying to breath some new life into her (and learning a lot on the way!). I have now finished the hull and am working on the decks and interior. One of these days (a longer time after I had initially thought) I hope to re float her, use her extensively in the harbour again and reunite her with her 2 previous family custodians.”
IMG_3724
‘Old’ photos below of Mandingo ex the Gowan family, the 2 black and white water skiing ones are presumed early 1960’s when she had a 40hp Johnson and the colour one 1983, sporting her still current Mercury 800.  Sam believes all are from Lake Rotoiti (North Island).
Mandingo
Mandingo smallIMG_1560

Update ex Sam Douglas

Ana Maree

Posted on by
6

image11

ANA MAREE

Just before Christmas I was contacted by Mark Skinner the owner of the launch – Ana Maree.
Mark sent in the above photos detailing the refit he did on her. Her home is Pine Harbour. Nice to see she got a top-chop, in my eyes 100% better looking 🙂
I do not know anymore about her but assume she is the same Ana Maree that appeared on WW back in November 2013, WW link below. Making her built in 1965 by Oliver & Gilpin and originally named Joanne.
There was a lot of chat re re provenance in the Comments section 🙂

Maharatia (Anita Bay / Te Repo Repo Relaunched

Posted on by
2

image15AH

image0AH

image23

MAHARATIA RELAUNCHED
 
Last week in the WW inbox up popped a note from Troy and Dave Searle the owners of the 1947 Roy Lidgard built – Maharatia, the subject line said “Maharatia (Anita Bay) Update”. Well woodys that was an understatement, I can report that Maharatia has been relaunched 🙂
Firstly excuse me while I rewind – back in August 2015 Paul Drake sent me a single b/w photo (c.1960’s) of a rather large woody on the back of a truck in Taupo. Paul commented that the launch was Te Repo Repo as she was named while operating commercially on the lake.
That single photo (below) ignited one of the biggest chat sessions on WW, there have been over 64 comments posted around the boats provenance.
I attempted to summarize it into one read, which you will find along with a great photo gallery of her past at the WW link below. Make sure you read the comments, start at the bottom 😉 
 
 
Now back to the the Searle’s email – I have reproduced it below – rather a big project – well done guys, amazing effort – email me your T-shirt sizes and I will gift you a couple of WW t-shirts. Hopefully in person at this weekends Mahurangi Regatta.
 
“Well finally after a 4 1/2 years restoration we have relaunched Maharatia.
Last Wednesday (8th Jan 2020) Boat Haulage safely transported her up to Dockland 5 in Whangarei from the boat shed at Omaha. 
She is now berthed in Marsden Cove Marina
Colin Brown, Josh Hawke and owner Dave Searle have worked hard to help bring her back to a very solid representation of her former glory.
Just a brief overview of the restoration work
– Replaced 23 frames in hull
– Replaced garboard plank
– Replaced all keel bolts
– Replaced all through hull skin fittings
– Re-corked hull
– Replaced worm shoe
– Rebuilt shaft logs
– Rebuilt rudder logs
– New diesel tanks 
– Motors (2 x 6LX Gardner) rebuilt by Shaw diesels Ltd
– Replaced all fuel systems, lines and filters.
– Complete rehire and re-plumbed.
– All new toughened glass windows
– New dash panel, gauges and instruments
– New Interior, saloon and galley
– Raised and built new roof to increase headroom by 80mm
– New shower/head room built in.
– New capping on rail
– New exhaust system
– All porthole windows removed, new glass and seals fitted.
– 2 new hatches made. Fwd cabin and roof top.
– New anchor winch
– Aft deck, seating and storage compartments made and hatch to lazarette installed.
 …and Lastly a full repaint.
 
Looking forward to spending our summer on the water this year! 
We hope to be at the Mahurangi regatta In a few weeks time and catching up with other woody enthusiasts.”
Screen Shot 2020-01-19 at 7.42.09 PM

Marlin 17 Rescued

Posted on by
5

20180729_130117_resized

20181009_175443_resized

20190412_124113_resized

20190412_121233_resized

Marlin 17 Rescued

Have been contacted recently by Keith Bradley concerning a Marlin 17 that he rescued from the chainsaw. The previous owner was about to cut the hull in half and mount it on the wall of the fish and chip shop in Nelson……… 😦

In steps Keith and the woody run-a-about is now 1/2 way thru a re-fit.
When Keith acquired her she had a large crack in the bow, that with help (verbal) from a local boat builder Kieth has addressed.
The project is actually more of a custom re-build than a restoration to as built, but rest easy – she will look a picture when completed.
Keith has set himself a target to have her back in the water for the Lake Rotoiti (Nelson Lakes) classic boat show at St. Arnaud this year, so he better get a move on 🙂
Keith would love to hear from any other Marlin 17 owners to swap notes re his and their boats.
The photo below of Keith’s shed shows an impressive collection of deer antlers  – must be a very good shot 🙂
20190413_130731_resized

Zircon

Posted on by
3

dads pictures 4494

 

dads pictures 4491

dads pictures 4493

dads pictures 4492

ZIRCON
 
Zircon made her debut on WW back in November 2015, when she had been purchased by Kevin Peet. At the time Kevin knew very little about Zircon’s provenance, over the next 4 years with the help of several WW readers, mostly past owners, we have ‘unpeeled’ her past. You can read / view this at the WW link below, make sure you read the comments sections – lots of chat there. https://waitematawoodys.com/2015/11/04/zircon/
In a nut seal – she is 34’ in length, built by Phil Lange in 1964, carvel hull and is still powered by her original 130hp, Perkins 645 diesel engine.
 
Fast forward to last week (Jan. 2020) and I was contacted by Matt Fearnley whose 84 year old father, Don Fearnley, bought Zircon in the mid/late 1960’s and owner her until 1979. Matt lives in Perth and mentioned that he was catching up with his father and  would send in some details and photos from the Zircon’s past – I have reproduced Matt’s note to me below, enjoy the read 🙂
 
“Well I spent the afternoon reminiscing with Dad about the old boat – it almost brought a tear to his eye. Great stories that I’ve heard a million times before but never get tired of.
Anyway here’s what dad told me that may be of interest :
 
Dad bought the boat in 1965 from a bloke called Chamberlain from Chamberlains Island? (Probably Ponui from what I’ve read on your site). The boat was called ‘Bette’ after Chamberlain’s wife and had been used to pull the barge mentioned on your site, and also cart sheep to the island. According to Dad the boat had little use and was like new. He paid 4000 pound – and Mum didn’t know until a stranger knocked on her door to say Dad could have the boat! Those were the days. I’d be gelded if I tried that….
 
Dad renamed the boat Zircon for a simple reason – He was in the coast guard at the time and had a jet-boat he had built at night-school called ‘Zip’ (because it was fast! – photo below of Zip on the trailer behind the EH wagon). Dad had the only boat that started with ‘Z’ in the coast guard, and he liked that hence the new boat had to start with a ‘Z’ too. Hence the birth of Zircon. 
 
One of the photos shows ‘Bette’ at anchor on the Wade River just prior to purchase.
 
The boat was used for many search and rescues including one near Gt Barrier Island during a bad storm and some damage was sustained to the hull. The story goes that Dad and his mates secured Zircon to some trees at high tide and when the tide went out they were able to effect some running repairs – not bad considering it’s a 12 1/2 ton boat.
 
Dad had some mods done in Auckland (Milford) before we moved to the BOI where the boat became part of the family, used every weekend for family and the local dive club. More mods done around ’74- ’75 on Arthur Smith’s slip opposite Opua. Dad added the fore-deck and the faux flybridge (no steering or controls) plus some other general maintenance.
 
Mum and Dad bought a bach at Whangaruru in 1977 and after that the boat sat at the mooring in Opua to be used by seagulls only. It was a very sad day when it sold but we were glad to know it was being re-modeled at Ashby’s boatyard to be loved by a new family. 
 
Thanks for the site Alan. You’ve put a smile on Dads face and he loved looking at the new photos, and to know the new owners have kept the only ‘Z’ in the coast guard.
 
Hope the above answers some questions the new owners may have.”
 
The photo below of Te Kouma, is a cracker – lots of woodys there, have asked Matt to check to see if a higher res version of the photo exists. 
If Kevin Peet still owns Zircon – sends us some photos 😉 
dads pictures 4448
dads pictures 4487

Ariana

Posted on by
3

Screen Shot 2020-01-09 at 8.46.43 PM

Screen Shot 2020-01-09 at 8.47.28 PM

Screen Shot 2020-01-09 at 8.47.19 PM

ARIANA

The build / launch date of Ariana is unknown but she was formerly a Nelson fishing boat named ‘Glenrowan’. Her current owner purchased Ariana in Picton in 2005, after extensive re-building by McManaways of Picton. She was relocated to Napier, where she still is to this day.
Her zoom zoom is from a near new Perkins Sabre model M225Ti installed 2015, current engine hours are only 25hrs, the Perkins gives her a cruising speed of 9 knots. She is 37’9” in length, with a 10’ beam.
Her trademe listing (thanks Ian McDonald) lists a very extensive inventory.
Can anyone help us got with details on builder > year of launch etc?

Valerie – Gets A Birthday

Posted on by
6

P1070331

P1070330

VALERIE – Gets A Birthday
During my recent trip up north, aboard Lady Crossley I visited the Opua Marina to attend the launch of Lady Ellen. While mooching around the hard-stand I spotted the 1929, Lane Motor Boat Co. built, 35’ launch Valerie. I last saw her in early 2018 in Whangaroa.
Valerie has had a change of ownership and is getting a ‘make-over’. When I spotted her at Opua , boatbuilder Ian Wood was hard at work getting her ready for a pre-xmas re-launch. The work would be best described as a ‘rollin restoration’. Included in the work to date is a re-power – out with the 65hp Ford and in with the 115hp Yanmar, check out her new prop – me thinks his old lady will be able to lift her skirt and dance 🙂

Read / see more on Valerie here: