AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part One

NZ’S UNIQUE MARINE ENGINES – Part One

Todays WW story is a little (or maybe a lot) out of the normal WW story style i.e. we are focussing on marine propulsion > engines not craft.

The story has been pulled together by Ken Ricketts, who comments while he has endeavoured to be as factual as possible there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back in commenting.

There are many sections to the story and the intention is to publish one part a week. 

WW are very conscious that most readers have limited interest in engines, h.p., gearbox ratios, prop sizes etc – BUT a very high % of the WW site visitation is research based, so the thinking is this data needs to be recorded for future recall. HOWEVER if the viewing numbers show low interest, an option is to just load the data up in one go.

So woodys over to you have a review / look and lets see the interest factor.

As per any Ken Ricketts item it will be riddled with typos and mistakes, but as stated the primary intention is to get the data in a location for future access. Over time we will ‘fine tune’ it.

NAPIER LION PETROL W12 (3 BANKS OF 4 CYLINDERS) PETROL AIRCRAFT ENGINES – CONVERTED TO MARINE USE BY POWER MARINE UK

A NAPIER LION MARINSED 500HP W12 PETROL AICRAFT ENGINE BY POWER MARINE UK, as used in RNZAF PATROL VESSEL W1, DURING WWII

ENGINE ROOM AS ORIGINAL IN W1 DURING WWII with 3 x PETROL NAPIER LION 500 HP AIRCRAFT PETROL ENGINES, AS ORIGINAL. — NOTE THE 3 GEAR LEVERS & ENGINEERS CHAIR 

ABOVE 2 IMAGES ARE OF THE CENTRE ENGINE VEE DRIVE GEARBOX/REDUCTION GEAR FITTED AS ORIGINAL, TO THE FORWARD-FACING CENTRE NAPIER LION W12 ENGINE, IN W1

THE 3 ORIGINAL PROPELLERS DRIVEN BY THE 3 NAPIER LION 500HP MARINISED PETROL AIRCRAFT ENGINES, AS FITTED TO W1. 

REPLACING A W12 NAPIER LION MARINISED 500HP AIRCRAFT ENGINE IN W1 DURING WW II.  

NOW BELOW, W1 AS A FULLY AIR CONDITIONED LUXURY PLEASURE CRAFT, AS AT 2025

W1 – WITH HER BEATUTIFUL GENTLE FLAT WAKE AT 22 KNOTs c2020 

W1 – HER ENGINE STORY. 

All RNZAF craft, have a permanent identification number, allocated  to them upon entering RNZAF service, & whilst only the number is ever actually sign-written on the boat, in all paperwork, & in the spoken & written word, they are all prefixed with a letter, & in the case of this craft it is a “W,” thus the craft referred to herein, was IDed as “W1” when it arrived in NZ & was therefore known  as “W1”, which has now  been given this title, as the boats official name, along with the special marine RT call sign of ZMWI.

She was originally imported new from UK by the RNZAF c.1940, & after her RNZAF service ended in c.1951, her designation & name of W1, was changed to CARROMA in the 1950s, by the Alright family, of Panmure, who did the first & second pleasure craft conversions to her, to become a pleasure craft, & now it has been reverted back to W1 by Francis Uren, the present owner who has created a 3rd new super luxury set of coamings & fully airconditioned fitout. 

She had 3 of these 500hp W12 cyl engines which were in 3 banks of 4 cylinders, as per the above image, as original , with the 2 outer engines facing aft, with conventional mechanical gearboxes, & the centre engine facing forward, driving a vee drive/reduction gear unit, so all 3 propellers, where in a  perfect line across, at the stern, (refer above image), as original, when ordered by the RNZAF in early WWII.

During her WWII service, she had to have a fulltime engineer, sitting in a padded chair, with soundproof earmuffs, in the engineroom, when the engines were running, & when she was at sea, controlling the gearbox reverse leavers on instructions from the bridge, & supervising the engines. 

The original engines were replaced initially, in the early 1950s by twin 6/71 GM Detroit diesels, by the Alrights, & later by one 600HP 8V/92-TI Detroit by current owner Francis Uren. post 2010 which she still has today.

HUDSON HOME MARINISED 6 CYL PETROL CAR ENGINE.

HUDSON 6 CYL PETROL CAR ENGINE as used in the yacht SUNDOWNER. (image unavailable)

Only one yacht/motor sailer called SUNDOWNER had this 1930s vintage engine, which in the later 1940s, had an issue with one cylinder & piston, so in the typical NZ No. 8 wire fashion, the owner of the day, simply removed the offending piston, & made it into a 5 Cyl Hudson home marinised marine engine. —It ran well enough, it but sounded funny in the exhaust.  

STUDEBAKER 1930s HOME MARINISED FLAT HEAD 6CYL TRUCK ENGINE

This was a very quiet, smooth running, reliable, low revving engine, originally fitted to the ROYAL FALCON, in the 1930s, & was replaced in the later 1940s, with a factory built marine petrol engine, & the Studebaker was sold to  Bill Waters, who installed it as original, in the 34ft GAY DAWN, in the early 1950s,  as she was being built by him & his son Brian. 

Ralph Ricketts, bought GAY DAWN in 1956, with that engine, & replaced it in 1958, with twin diesels, – (refer later engine listing.) RR sold it.

ROYAL FALCON IN HER STUDEBAKER ERA

GAY DAWN ON LAUNCHING DAY SEPT 1953 WITH HER STUDEBAKER PETROL ENGINE

CROSSLEY MARINE DIESEL ENGINES 

A TYPICAL SMALLISH CROSSLEY ENGINE, PERHAPS SIMILAR TO THAT IN THE LADY CROSSLEY

LADY CROSSLEY POST 2020 

There is the only example known to me, of these engines, in NZ pleasure craft, & that was in her namesake boat, the beautiful LADY CROSSLEY, built for Seager Bros. Ltd Auckland, who were the agents at that time, as a demo boat for these engines. 

However, they were 2 cycle direct reversing, — (as are all or most direct reversing engines), — which meant that one had to stop the engine, & restart it, running the opposite direction to go in reverse, which of course had to be done in the engine room, on directions from the helmsman, up in the bridgedeck. this was highly unsatisfactory, & quite dangerous in this type of use, & after only a very short time, they were replaced by twin Gardner 6LW diesels which she had for many years & may still have.

FAIRBANKS MORSE MARINE DIESEL ENGINES    

FAIRBANKS MORSE 4 CYL 1930s DIESEL PERHAPS SIMILAR TO THAT IN LADY MARGARET 

LADY MARGARET BY DICK LANG. WITH FAIRBANKS MORSE DIESEL ENGINES – THEY HAD SIDE EXHAUSTS- SEE STEAM – WWII-  LATER ENGINES IN LADY MARGARET DID NOT HAVE THESE, – THEY WENT OUT THE COCKPIT CABIN TOP IN SHORT STACKS

FAIRBANKS MORSE DIRECT REVRSING 2 STROKE DIESEL ENGNES, AS USED IN AUCK. PASSENGER & VEHICULAR FERRIES PRE 1958 – 

AUCKLAND HARBOUR PASSENGER FERRY, WITH FAIRBANKS MORSE DIESEL ENGINE c1950s

THE LADY MARGARET ENGINE STORY 

Whilst these are mostly used in very large versions in ocean going ships, & large craft, they did or do make smaller engines & there was at least  one example of these in Auckland, I am aware of, & there may be others,  & that is in the 1939 Dick Lang built, LADY MARGARET, for Ted Clark, who installed 2 of them, when she was built, which were ultimately replaced by 2 x  6 cyl Fodens, in the mid/later 1950s. (no image available of  Fairbanks engine)

AUCKLAND HARBOUR PASSENGER & VEHICULAR FERRIES 

These engines were also used for many years, in Auckland Harbour vehicular & passenger ferries, in a very slow revving, 4 cylinder direct reversing, —  (must be stopped & restarted, to run the other way for reverse), — 2 cycle version, with 2 engines, with one engine facing a propeller at each  end of the boat, up until the Harbour Bridge opened in 1958, except for one or 2 passenger ferries, that had one single 8 cyl version, & I think a few passenger versions may have been  kept in use, for a year or 2 after 1958.

NORDBERG PETROL MARINE ENGINES 

NORDBERG 100+hp petrol engine, similar to those fitted as replacements for original engines, to LADY DIANA & MAKURA

LADY DIANA. AS SHE LOOKED. WITH HER NORDBERG PETROL ENGINE. – EX B WORTHINGTON.

MAKURA IN HER EALRY DAYS – THE NORDBERG ERA

NZ agents for these, were Seabrook Fowlds Ltd Auckland, in the 1950s, & the M.D. Phil Seabrook, had one fitted to his LADY DIANA, replacing her original Austin Skipper 100, in the later 1950s, for which his company also held the agency, at that time. 

A second engine was fitted to his brother-in-law, Cranston Leighton’s MAKURA, after he sold her to brother in law Phil Seabrook, in the later 1950s. 

Both of these engines have long since been replaced with diesels, & they are the only 2 examples that I am aware of, ever in pleasure craft, but of course, there may be well others, & look forward to any input from other boaties or engineers to confirm this, but these engines never became really popular & a big seller.   

RUSSELL NEWBERRY DIESEL ENGINES.

MOVARIE WTH HER 2 RUSSELL NEWBERY 40HP MARINE DIESEL ENGINES. c. LATER 1940s. 

These are made by the RN Diesel Engine Company Ltd., which was founded in UK in 1909, & is still manufacturing engines today in UK, & there is only one example in NZ, that is the 1938 built MOVARIE. 

These were 2 x slow revving 4 cyl., 4 cycle engines & were 40 H.P. Russell Newberys, as original, which were eventually replaced by 2 x Ford Diesels in 1960.

BMW MARINE DIESEL ENGINES & STERN LEGS.

BMW 6CYL MARINE DIESEL ENGINES WITH STERN DRIVES 

While made in fairly substantial numbers by BMW, only 1 pleasure craft in NZ  had them, which was a standard designed Formula 4000 Vindex & it had 3 of them with stern drives. 

LEYLAND MARINE & MARINISED DIESEL ENGINES.

LEYLAND BEAVER PRE MARINISED 6CYL DIESEL ENGINE.

LEYLAND PRE MARINISED 6CYL DIESEL TRAIN ENGINE SIMILAR TO THAT IN THE SHENANDOAH   

TWIN LEYLAND CUB  6CYL HOME MARINISED 95HP DIESEL ENGINES BEING INSTALLED IN THE GAY DAWN 1958-59

ISLE OF ARAN with LEYLAND COMET 6 CYL DIESEL 

BLITZEN WITH HER 2 X LEYLAND BEAVER DIESEL ENGINES

GAY DAWN WITH HER 2 NEWLY INSTAALLED LEYLAND CUB DIESELS AT THE B.O.I. 1960 

LEYLAND 4 CYL DIESEL ENGINE – ONE OF 2 AS FITTED TO THE LANAI 

LANAI WITH HER 2 X 4 CYL LEYLAND DIESELS 

JULIANA READY TO LEAVE HOME FOR THE WATER, WITH HER JUST FITTED LEYLAND CUB DIESEL 1947 

RAIONA POST LEYLND COMET ERA.

SHENANDOAH WITH HER LEYLAND TRAIN ENGINE

There are a very few Leyland engines that were ever fitted to pleasure craft, & are all 6 cyl., except for the LANAI. which has or had, 2 x 4 cyl. Leylands. 

Other craft included the RAIONA, with a Leyland Comet, fitted by the Alf Secombe, in place of a previous petrol engine. Also, there was the Guthrie’s Leyland Comet, the original engine, in the ISLE OF ARRAN. 

The SHENANDOAH also had a Leyland 6cyl. home marinised train engine which was fitted around the 1990s. 

Ralph Ricketts fitted 2 x Leyland Cub Diesels to the GAY DAWN in 1958-59 in place of its previous single Studebaker truck engine, later removed & replaced by a single Ford Diesel, by a later owner.

The only other pleasure craft was a Leyland Cub installed in the 30 foot SAGA, by owner/builder, Kings College master, Mr Val Maxwell. 

The beautiful big bridgedecker BLITZEN, is/was also powered by 2 x Leyland Beaver, locally marinised diesels.  

Ralph Ricketts fitted 1 Leyland Cub to the JULIANA in 1947, which he removed in 1956 & replaced with a 4 cyl Buda Diesel, he bought from John Warren who had removed it from his ARCTURUS, that had been built for him by McGeady a few years earlier, & he replaced the Buda with a 6 cyl diesel. This was replaced in the JULIANA, with a 6 cyl Ford Diesel, by the owners of the day, the Algie Brothers, of Algies Bay, Mahurangi, about 20 years later.

RR fitted the Buda to the JULIANA in place of the Leyland because he had another brand-new complete engine, & he fitted the 2 of them in the GAY DAWN in 1958-59

Two Leylands were fitted to the iconic passenger ferry BAROONA, replacing her previous single engine, around the later 1950s/60s.    

THORNYCROFT MARINE PETROL ENGINES.

THORNYCROFT 4 CYL TEE HEAD PETROL ENGINE, identical to that which was marinised & installed in the JULIANA, while she was being built in 1930 by Sam Ford. 

THORNYFROFT 6 CYL PETROL MARINE ENGINES WITH ONE SIDE VALVE & 1 OVERHEAD VALVE  (no images available) 

MANOWAI in her THORNYCROFT ERA

RAUTANGI with her THORNYCROFT 6 CYL petrol engine.

JULIANA on her relaunching day in 1946 after her THORNYCROFT TEE HEAD 4 CYL PETROL ENGINE, SEE ABOVE had just been totally rebuilt by owner Ralph Ricketts.

Thornycroft engines had always been produced in substantial numbers in UK, however only a tiny number, in pleasure craft in NZ.

The tram topper MANOWAI had one, in the Claude Atherton era of the 1930s & up to the later 40s, which had 1x overhead valve & 1side valve, as many Thornycrofts, did for many years. He replaced that engine with a twin cyl. Ruston Diesel for use, after that time, as a longline fishing boat. The second & third Thornycroft’s were in the RAUTANGI, & both fitted by or for, Les Sterriker, of Sterriker Engineering, in Kyber Pass Newmarket, one after the other, the last being larger with more HP., than the first one, it was eventually replaced by a Ford Diesel by a later owner. 

There is or was also, around the 1970s/80s era, a UK custom purpose-built rescue craft here, painted orange & blue, fitted with 2 x Thornycrofts, which was moored at Matiatia at one time. 

RQLPH RECKITTS  purchased the JULIANA in 1946, & she had a 1920s vintage Thornycroft Tee head 4 cyl petrol truck engine home marinised, running on salt water, which was her original engine, when she was built by Sam Ford, In 1930, which was absolutely identical, to that shown in the image attached, which was not in very good health, when RR bought her, so he  immediately totally rebuilt it in 1946 himself, not knowing at that time, he would be removing it in 1947, to fit a Leyland Cub diesel in its place, he had later acquired, & he fitted an additional distributor ignition system, as part of the rebuild, of the Thornycroft, as well as retaining the existing magneto, giving her dual ignition. 

MEADOWS 4 CYL PETROL ENGINE AS FITTED TO THE LEAH by Dick Daniels in 1946

MEADOWS 6 CYL PETROL ENGINE as fitted to TEAL & RNZAF flyingboat harbour patrol craft in the1940

LEAH with the newly installed MEADOWS 4 CYL, with her newly home marinised MEADOWS 4 CYL PETROL ENGINE – 

MEADOWS 2 x 6 CYL PETROL ENGINES fitted to TEAL flyingboat harbour patrol craft c1950s

Only 1 of these engines used in pleasure craft, it was a 4cyl version painted bottle green, as they all seemed to be, (as were all the Thornycrofts as well), in the 30ft bridgedecker LEAH, for Dick Daniels in the mid1940s. 

TEAL had 2 of them in some harbour patrol craft for flying boat patrols fitted with twin 6 cyl versions of the engines) the RNZAF.also used them in a number of their patrol craft, in the 1940s to around 1960. 

AEC DIESEL ENGINES

AEC 6CYL DIESEL ENGINE, home marinised, as fitted to the INEAWA

INEAWA WITH HER AEC  6 CYL home marinised, DIESEL ENGINE

Only a handful of these beautiful smooth quiet running UK built diesel engines, in pleasure craft in NZ, which are now no longer made. The AEC company was bought by Leyland many years ago, & production eventually ceased. They can be compared very favourably to an 8L3 Gardner, with their sound, & smooth quiet running. 

There is at least one large bridgedecker similar to the BLITZEN that has 2 of them & also at least 1 other single engine, smaller boat.

FAY & BOWEN PETROL ENGINES

FAY & BOWEN 6 CYL 1920s PETROL ENGINE as fitted to the MARGARET S

MAGARET S with her FAY & BOWEN 6 CYL MARINE ENGINE

There has only ever been one boat with one of these engines, & that is the MARGARET “S,” which had one from 1923, until after 1967, now almost certainly replaced by a diesel, as most boats are, these days.

LOEW VICTOR (KNIGHT’S PATENTS), 4 CYCLE PETROL ENGINES

LOEW VICTOR 4CYL PETROL 1913 MARINE ENGINE

LOEW VICTOR 4CYL PETROL 1913 MARINE ENGINE in the boat of the same name in c1913s

A 32ft launch was built by Bailey in 1913, with a 25H.P. engine of the same name, showing a good turn of speed in the images, however she appears to be one of just a small number of craft with these engines.

BUDA PETROL & DIESEL MARINE ENGINES. 

BUDA 1940s 6 CYL MARINE DIESEL ENGINE, SIMILAR TO THOSE IN AMAKURA IN THE 1940S, & THE MAHARATIA WHEN BUILT c1949

ARCTURUS – HER ORIGINAL ENGINE WAS A 4 CYL BUDA DIESEL  (no image)

JULIANA PASSING THROUGH PARNELL ON HER WAY TO THE WATER WTH HER NEWLY FITTED 4 CYL BUDA DIESEL EX ARCTURAS 

REHIA WTH HER c100HP BUDA FLAT HEAD 6 CYL. PETROL ENGINE, WHICH HAD DUAL IGNITION, WITH 12 SPARK PLUGS, FED FROM A SINGLE 12 POSITION DITSRIBUTOR CAP, & A BENDIX REVERSE CONTROL SYSTEM, & THROTTLE, WTH 2 LITTLE 6 INCH LEVERS, IN A DUAL SMALL CONTROL UNIT. – VERY RARE IN THOSE DAYS.THIS WAS HER ORIGINAL ENGINE FROM NEW, WHICH SHE HAD FOR A GREAT MANY YEARS, & OWNER, BILL RYAN, IS STANDING IN THE DOORWA.

MAHARATIA IN EARLY YEARS, WITH HER TWIN BUDA 6 CYL DIESELS.

Only a comparatively small number of these in NZ, because the company was bought by Allis Chalmers in 1953, & manufacturing finished that year.

There were however 5 in total, fitted with 2 to the AMAKURA, during WWII, by the navy, which were removed & replaced by 2 x Graymarine petrol engines, by the owner of the day, a Mr Widderspoon in1947-48, as they were belching huge amounts of black smoke out both sides, as she had side exhausts by then. She was moored at that time, at Hobson Bay, just by the Judges Bay bridge, under the other side. There was also the ARCTURUS, that had a 4cyl Buda Diesel installed during construction.  

The MAHARATIA also had 2 x 6 cyl Buda diesels as original, when built by Roy Lidgard, & at his Kawau Island property in 1947 & towed to his Auckland shed to have her engines fitted Auckland shed, which were a number of years later replaced by 2 x 6LW Gardner Diesels.

The 32 ft ARCTURUS was fitted with a 4 cyl Buda Diesel new, by boatbuilder Mac McGeady, (Supreme Craft Ltd) for John Warren, of Mission Bay, with installation by Tracy Nelson, which John W., later sold to Ralph Ricketts, & which was then installed in the JULIANA, for many years. Ultimately removed by the Algie Brothers of Algies Bay, Mahurangi, & replaced with a 6cyl Ford Diesel around the 1990s.   

DAIMLER BENZ V12 DIESEL ENGINES

DAIMLER BENZ 1350HP DIESEL ENGINE REMOVED FROM THE HYDROFOIL MANU-WAI FOR OVERHAUL

HYDROFOIL MANU – WAI, WITH HER V12 DAIMLER BENZ 1350HP DIESEL ENGINE

Only ever been one craft in NZ that had one of these engines. They ran at comparatively low revs (under 1500 RPM) & had to have hot engine oil pumped through the engine for 20 minutes before starting when cold.

This craft was the Auckland based passenger ferry MANU-WAI, which provided the first high speed passenger services to Matiatia Bay at Waiheke Island, & also to Pakatoa Island, in the Hauraki Gulf. The engine was based on a marinised aircraft engine of around 1400HP., with engine revs governed to around 900rpm

VM DIESEL MARINE ENGINES

TWIN VM DIESEL ENGINES 

LADY KIWI (EROS) WITH HER TWIN VM DIESEL ENGINES

These engines are still made by VM Motori Ltd in Italy which started life as a standalone company, in 1947, however it has had a checkered career, of various part owners, & has ended up today fully owned by Stellantis or Fiat. 

The only boat with these engines, is the first 40 ft Vindex to be built, designed by Jim Young, & built by Orams, of 2 skins of Kauri, in Whangarei, in 1972.

She is the EROS, built for Auckland bed manufacturer Alf Broadhead, sold when he died, & is now renamed LADY KIWI, & her original engines were replaced probably around 15 years ago now, by the above 330 HP versions of the VMs.

STEARNS MARINE PETROL ENGINES WITH ONE SIMILAR TO ONE OF THOSE ABOVE, FITTEDTO THE COLIN WILD BUILT LADY MARGARET, AS ORIGINAL  

STEARNS PETROL MARINE ENGINES c1926 

LADY MARGAARET (BUILT BY C. WILD) WITH HER STEARNS 165 HP PETROL MARINE ENGNE c1929 

F B Stearns was born into a wealthy family, & by his teen years, had developed a passion for cars & engines, so his father “indulged” him, with the creation of F B Stearns & Company, being established, in the late 1800s, & by 1907 the it was producing its first production run of vehicles, with a side valve engine he had built.

In 1911 he developed an association with the Willys (Overland) organisation, which had already developed a beautifully quiet smooth running “Sleave valve,” engine & his company from then on produced all sleave valve engines & their cars were from then on, known as “Stearns Knight.” 

They also manufactured marine engines. Steans retired from the company actively in 1919, & it was sold to Willys (Willys Overland), in 1925, & the company was wound up in 1929, so Stearns marine engines were only ever produced for a very few years.

Auckland businessman H. O. Wiles acquired the NZ agency for Stearns marine engines, sometime around the 1920s & fitted a 165HP Stearns engine to the beautiful 42 ft LADY MARGARET, that Coiln Wild built for him in 1927.

She was very fast for her day & he entered her in various competitive events successfully. 

She is one of our all time great classics of NZ, & these days, sports an artificially aspirated 6 Cyl Ford diesel.   

NOTE – MORE INFORMATION TO VIEW EX READERS IN THE REPLIES SECTION – click below

READ PART #2 OF THE SERIES HEREhttps://waitematawoodys.com/2025/04/12/an-insight-into-nzs-unique-marine-engines-part-two/

Tradition

Tradition @ Mahurangi Regatta 2016

Tradition at the Mahurangi Regatta 2017

Screen Shot 2020-05-16 at 9.18.55 PM

The 'Bar'

The Bar

TRADITION

The 44’ launch Tradition slips comfortably into the woody ’Spirit of Tradition’ (excuse the pun) category – designed by Bo Birdsail and built by Geoff Bagnall, she was launched in 1990 for Rhys & Dick Boyd. Today’s WW story is a first for WW in that the format is an interview by Keith Busch (a former owner) with Rhys and Dick. Make yourself a cup of something and find a comfortable chair – its a cracker read and really showcases what a talented boat builder Geoff Bagnall is. Special thanks to Keith for pulling this story together – simply brilliant.  Full specs and ownership summary on the vessel at the end.

Keith : What do ‘Tradition’ and the Auckland pilot boat – Akarana, (designed by A. J. Collings & built by W. G. Lowe in 1960) have in common?*

Dick : I went into the fishing industry in the seventies. By 1985 I had a quota of my own and a purpose built long-liner – Kerama. Then the new owners of the company I worked for (Polar Seafood Co.) wanted me to come ashore and be fleet manager for all their trawlers.

Rhys : Anyway, one day he had just unloaded a catch and we were on our way home to our place near the Tamaki Bridge and he told me just how much he’d got per kilo for the fish he’d landed, and it was astronomical! Then he slipped in that he wanted to build a launch.

 Keith : So what year was this?

Dick : I would say it was 1985.

Rhys: So I said, ‘We’re not building a launch!’, and he said, ‘But I’ve got everything for it’, and I said,  ‘I don’t care, we’re going to buy another fishing boat, with prices like that we’re going to be loaded!’ So next day I go to work and on the way home I thought, ‘Oh that was a bit mean’. So he comes home that night and I said, ‘We need to have a talk’, and he said, ‘I’m going first. I’m building a launch!’, and I said, ‘I was just going to say that!’ So that was the beginning, it was like, ‘Oh I can’t do that to him, he wants it too much’. So we didn’t get rich, but we did get Tradition.

Keith : So where did you start, did you go for a builder or a designer first?

Dick : Well the designer was Bo Birdsall. I went to see John Lidgard first and I asked him to draw me a boat, but after a few sketches I wasn’t getting what I wanted. Then somebody, oh Roy Rimmer, said to me try Birdsall. So we met with Bo and he drew it up. We were real happy with his hull, it was great. But I still had a few questions about his topsides. Anyway, when we got Geoff onboard we thought we could start from Bo’s drawings and go from there, so that was the beginning of it. Bo was a real nice guy and extremely clever. He was good to work with.

Keith : So you were happy with the hull, how’d you end up with that beautiful topside?

Dick : Well what happened was, Bo drew it up and he didn’t include the sedan roof on the fore deck, so it was just the main cabin sitting on the deck. But when Geoff was building the boat the radius that had to go into the forward area to give head room, well it just didn’t work. Anyway Geoff came up with the idea to put a sedan roof on the forward deck and just that small addition balanced out the main cabin nicely. It’s one of those things with a good builder, he just put up some false frames, then let us have a look at it and it worked. He’s got a great eye for those things you know, always looking as he goes.

Rhys : We didn’t get a drawing of it and say, ‘Yes that all works’. All of us looked at her as we went.

Dick : Of course Geoff would have put a little more sheer on it, because that’s just Geoff, but I liked Bo’s idea of the hull. It’s very hard during a build, a lot of the time you don’t know what you’re going to end up with. We had ladders all over the show. You’d be climbing up and down and looking along the boat and trying to imagine what it was going to look like in the water. Later we were down the side of Waiheke and this guy passes and yells out ‘Geez someone made a great job of that!’, so I think it in the end she works.

Keith : So going back a bit, how did you get Geoff Bagnall as your boat builder?

Dick : Well okay, first we started talking with Brin Wilson’s boys Richard and Bob Wilson, because Bo’s wife was related to the Wilson’s. Bo said ‘it would be good if you got the Wilson’s to build it. I’d had nothing to do with them so I got a price from them and I though ‘Well we’ve struck a bit of a wall here!’. So I talked to Bo and he said ‘Okay, then try young Bagnall’. So I contacted him and he was interested at a price we could manage and we went from there.

Keith : ‘Young’ Bagnall! He’s just retired! How old was Geoff at this time?

Dick : Just around forty or something about that, because he had built – Nazareth and the yacht. He’d already built several boats, oh and he’d built the one that hit the bricks going over to Barrier (Onetunga?), oh and Katoa. He would have built about 8 or 9 boats by then and he designed some as well, I think he designed Katoa. His boats are a little hard edged to my eye. More ‘solid’ compared to Bo’s lines I think.

Keith : So where was she built then. Was Geoff off on his own?

Dick :  When he did Tradition he built it in the old Harbour Board timber mill. The Harbour Board had just been privatised and they weren’t using their mill building at Westhaven, so Jack Fagan organised for us to use an area in the mill shed. That was real handy because all the woodworking equipment was in there so we could use it to deal with the timbers. All her timber work was done there in that mill building, except we sent the kauri out to a joker who did timber dressing in Rosedale Road and he did the whole lot. So it went out in flitches and it came back in nice dressed planks ready to go on the boat. The planks for the hull are inch and three-quarter by inch and a quarter heart kauri.

'Tradition' Construction-2

Work on Tradition commences in the Auckland Harbour Board Timber Mill building 1989

Keith : So where did the wood come from?

Dick : It came from Noel Mitchell who was the foreman at the Ports of Auckland slipway. When Akarana*, which was Auckland’s biggest pilot boat in those days, was being built, Noel had decided that a pilot boat could get smashed up real easy, so he bought enough kauri and teak for extensive repairs and put that aside to repair Akarana if she got crunched. There was talk of them selling this timber for houses but Noel said ‘No, it’s for boat building so we’re selling it for that. So that’s where we got the timber. We got all her heart kauri and the teak there.

Keith : So where exactly was the Harbour Board timber mill located?

Dick : Well, to the best of my memory, it was just past where ‘Sailors Corner’ is nowadays. On the left hand side of the road, well that was all Harbour Board land. Its where McMullen and Wing’s haul-out is now. The Harbour Board had three or four slipways there and they used to do all the work for us on the trawlers. They were close by so the company could keep the trawler crews employed by doing all the cleaning and paint-work and chip rust off the boats instead of spending all their time in the pub. So I knew Noel and it worked out pretty well.

Keith : So you got hold of Geoff and he was keen to take it on?

Dick : Oh yes. He had this old mate called Bert who used to sweep the floor and mix the glue and make the tea. Of course Bert has passed away now but he was a hell of a nice old guy and he worked on her as well.

Keith : Who else was involved in the build?

Dick : The wiring was Peter Galley, the painting was Mark Binney, plumbing was Alan Kemp, who was a Harbour Board guy. There was a lot of input from the slipway workers off and on and in their own time. Of course, I supplied them with fish non-stop so it was give and take, a bit of barter. The engineering was, oh well we did most of that stuff ourselves.

Keith : And the Ford engine was from Lees?

Dick : No, the engine was from Don Bernand,  Don is Mr Ford, he’s brilliant. I think we bought the engine in Tradition from Newlove in Whangarei and Don did the marinisation. He served his time with the Lane Motorboat Co. on the Tamaki River and when Lees got out of Ford he bought everything off them, all the patterns, moulds, that sort of stuff and set himself up at home. Don bought the new engine for me. It has a Newage Coventry 2:1 gearbox and the ‘get-home’ kit in it. At the time it was hard to find the gearbox we wanted but Don eventually found it and we fitted it. I can’t think who did the hydraulics, but it was all fitted by us.

Tradition Engine Room

Keith : So you gathered all her bits and pieces together. When did the build start?

Dick : It took me 6 years to put everything together before I got to the point where I could say, okay I’ve got enough to go and do it. During that time I had all the timber stored at home. At my son’s 21st we had the filches on sawhorses under the marquee so all the guests were sitting around on the kauri filches. They hung around for years reminding me to keep collecting stuff. The brass portholes in the cabin doors come from an old fish ‘n chip shop in Howick, while the ship’s bell is from the ill-fated ferro fishing vessel the – Trident.

Rhys : We’ll he’d been collecting things for a long time. He had some things ready to go. He’d probably told me he’d bought stuff for a boat but I hadn’t listened or realised it was enough to build a complete boat.

'Tradition' Construction-1

Boat builder Geoff Bagnall begins work, July 1989

Dick : The photo above is the laying out of the frames internally. You’ve got them all standing up there. That’s Geoff in his younger days. Geez he looks different there doesn’t he!

Keith : So the date on that photo is July 26th 1989, is that about the date she was started?

Dick : Would’ve been pretty close to it. Maybe a month before perhaps.

Rhys : Lucky the cameras had the dates on them in those days.

Keith : So tell us about all the effort of the construction.

Dick : Well we could lay 8 planks per day. So all the frames were stood up and we had the steam box ready for the planks there at the mill.

'Tradition' Construction-3

Original owner Dick Boyd sanding plugs on the hull, 1989

Keith : So you were coming down each day and helping Geoff?

Dick : I used to come in at night after work and do all the plugging. So Bert, cuppa tea maker and floor sweeper, he used to help Geoff during the day. They used to put the timber in the steamer and the following morning they’d come in and put those 8 planks up and then put another 8 in the steam box. So it was pretty slow going. I’d come in after work and do the plugs. But they were always in front of me because you couldn’t work on the planks that they had just put up that day because you’re driving the plugs in, so I was always a bit behind them plugging and sanding.

Rhys : Don’t forget you had to make all those plugs yourself too.

Keith : So how many were there? Did you count?

Rhys : He wouldn’t be brave enough to count, that would have been tear-jerking.

Dick : No, it was slow work. But the reason I plugged it was that sometimes you wake-up in the morning and you’re able to see every bit of bog that’s gone into a boat and you shouldn’t be able to see that with proper plugging.

'Tradition' Construction-4

Geoff Bagnall and assistant Bert working on the hull, 1989

Dick : Roy Rimmer used to pop in to make sure we were doing everything right. There was a lot of interest in the boat, because it was very handy to everybody in the harbour area.

Rhys : A lot of people would pop in after work and see how we were getting on.

Keith : So why did you choose to build her in wood?

Dick : Well you’re right, wooden boats were not being built at the beginning of the 90’s and a lot of people said ‘What are you bloody well building a launch that big in wood for?’ But, you know, it was what we both wanted. If I go back to the days of the old ‘Golden Kiwi’ tickets, my nom-de-plume was always 44’x14’, that’s because I was determined I was going to build a wooden launch that was 44’ long with a beam of 14’. Ha ha, I never won the Golden Kiwi did I! But even way back then I was thinking of her, I suppose it was my dream. And I’d always said I’d love a boat with proper teak coamings, teak decks and a hull of kauri.

Rhys : With a wife to varnish and look after it!

Dick : Yeah, I was lucky I had one of those!

'Tradition' Construction-5

Geoff Bagnall turns the hull, September 1989

Keith : What were some of the comments you got when you were building her.

Dick : Well it was the materials of the build that attracted people. It’s a kauri strip planked boat, but the availability of kauri was getting very tight, even in those days. You just couldn’t go out and buy it. If you did happen to find some stacked up somewhere, it was really expensive. But because we knew the blokes at the Harbour Board and had feed them a lot of fish over the years, we got lucky with the source of the kauri we used. They gave it to us at a reasonable cost and there was also teak there that was meant to repair the old pilot boats, but they were being retired and the new ones were steel.  Colin Clare might know how old the wood itself was. I can’t honestly say, but it was already old when we bought it. I think it was milled on Great Barrier. Anyway, they were happy to see it go to build a boat and not end up in a kitchen cupboard.

'Tradition' Construction-6

‘Bagnall’s work of art’.  Dick’s son Adam finishing the inside of the hull, October 1989

When I took Geoff in to have a look at the timber, there were stacks and stacks of 3’’x 2’’ kauri, but the sap wood was all full of borer. So we set those bits aside and all the stuff we bought were filches of heart kauri. The teak there was all 3’’, so Geoff split them and I think the cabin is inch and three-eights. Anyway, there’s a lot of teak in her topsides and a hell of a lot of kauri in the hull! What else? Well, there’s some totara in the keel, that came from the Salvation Army place down at Rotoroa Island. The guy who ran the ‘Kahino’ was a mate of Geoff’s and he provided that for us. Most of the keel and the engine bearers are Australian brushbox which is quite a hard, heavy, red coloured wood, but you have to watch it because it will get worm, that’s why it’s glassed over.

'Tradition' Construction-8

Topsides taking shape, March 1990

'Tradition' Construction-9

Dick Boyd checking proportions.

Keith : So how long was the build time.

Dick : Well what did we say, from mid1989 and it was launched at the end of 1990.

Keith : So all your mates and friends came and gave you a hand at some stage?

Rhys : Only Mary Smith came to help, the others came to drink! But Jack Fagan did some work on it, he was good.

Dick : It’s amazing how hard helpers are to find. The minute you mention sandpaper, they’re off, outta here! But Jack was one of the supporters of the whole project, he helped make things happen sometimes when we hit a wall.

Rhys : By the time we had the launching we were so exhausted from months and months of work we didn’t want her! We launched it and then everybody got so full of wine and drink that the next morning we had a shocking hang-over. We dragged ourselves out of bed and went round for breakfast at Westhaven and I said to Tich, ‘Do you want the boat’ and he said ‘Na’. Of course we didn’t really mean that, but oh it had just been such a big job and she wasn’t finished by a long shot. We didn’t have a stove or a fridge. We didn’t have squabs. We had a toilet and a shower, that was it! To top it all off we’d run out of money!

Dick : We had to follow Chris and Mary Smith around, because they had a launch called ‘Hukarere’ and they had a nice cooker onboard, so we used to follow them.

'Tradition' Construction-10

‘Looking for the Smiths’ – maiden voyage to Rangitoto, November 1990. Dick and Rhys Boyd on the flybridge.

Rhys : They also had a fridge so we kept our cold stuff in there.

Dick : Paul Nolan had a big Salthouse 53’ ‘Blitzen’ and he had a whole lot of squabs because he was replacing his so I said ‘don’t throw them out, we’ll be round to pick them up’.

Rhys : So we slept on those squabs and wherever Chris and Mary were, we were there. We couldn’t even make a cup of coffee! So they spent their time trying to lose us and we spent our time trying to find them. ‘Would you two like to come over?’ they would say, and we’d already be in the dingy heading towards them. And then after a while it was like, ‘gosh, can we even afford to finish her?’.

Dick : Anyway, over a few years we slowly pieced the rest of her together.

Rhys : Yes, there was still a lot to do. All the sanding inside is mine, every single inch!! You know I was a kindergarten teacher, so every school holidays, for two weeks in May and three weeks in August, and most weekends, we were on the boat doing something. I’d row out, hop on the boat outside our place in the Tamaki River and I’d get going on something. Lots of sanding, lots of varnishing.

Keith : So where did you take her on the first trips.

Dick : Well I liked the bottom end of Waiheke and over at Coromandel, Te Kuma.

Rhys : And we never managed to get to the Bay of Islands because we were working too much.

Dick : Also Waiheke. Oneroa was always popular because the Smiths were there. They still tell us when Tradition is in the bay. We have our spies! And she’s a notable boat anywhere you go, people respond to her and row over to have a yarn. Yeah, Geoff did a great job on her. One of his best.

Rhys & Dick Boyd on Tradition

Original owners – Dick & Rhys Boyd, Mahurangi Regatta, January 2017.

Owners of M.V. Tradition since Dick and Rhys Boyd 

1990-1996 > Dick and Rhys Boyd  – Moored in Tamaki River

1996-?        > Dave ? [clue – owned a pub in Mangere?]

19?? – 1998  > ?? Two guys bought it from Dave via a broker [information from Rod Middleton (Sailors Corner) They wished to take her south by truck to Mana Marina but after talking with Geoff they sailed her down the coast.

1998-2006 > Sold to Peter and Jenny Standish from Wellington and berthed at Mana. Cruised in the Marlborough Sounds.

2006-2007 > Sold to a Picton local. Moved to Waikawa Marina, Picton

2007-2011 > Sold back to Peter and Jenny Standish. Berthed in Waikawa Marina. Had a major refit at Frankins Boat Yard, Waikawa in 2009.

• Varnish stripped inside and two pot urethane used.

• New navigation electronics, TVs, sound system, stove, leather upholstery, carpets, covers and bow thrusters added.

• Bunks in forward V-berth removed, double bed built in.

2011-2019 > Sold to Keith Busch & Wiesje Geldof of Wellington. 3 years berthed at Waikawa Marina. Vessel trucked north to Tauranga from Mana Marina 2013. 3 years berthed at Bridge Marina, Tauranga. Hutchinson’s Boat Yard, Tauranga work :

• Stripped outside varnish and replaced with 16 coats of ‘All-wood’ urethane

• New teak plank deck installed. Boot topping strip repainted in light green.

• Fly-bridge helm station repainted. Holding tank and generator added.

3 years berthed at Hobsonville Marina, Auckland

Accepted into Classic Yacht Association in 2016 as ‘modern classic’.

2020 > Sold to Chris and Rae Collins of the RNZYS

Lower Helm Station

Lower helm station

'Tradition'. BOI 2016

Bay of Islands 2014

Specifications of M.V. Tradition

Type : Saloon Launch

Designer : Bowden ‘Bo’ Birdsall

Builder :Geoff Bagnall, built at Auckland Harbour Board mill building, Westhaven

Launched : November 1990

Commissioned : Dick and Rhys Boyd of Tamaki, Auckland

Dimensions : LOA 44 feet, beam 14’ 3”, draft 4’6”, displacement 11.5 t

Engine : 1990 Ford 145hp ‘Marko’, cruises at 9 kts, max speed 11kts

Gearbox : Newage Coventry 2:1 gearbox

Construction : Kauri planked hull (inch and three-quarter by one inch, glassed-over), strip-teak deck, teak topsides, white hull with light green boot-topping, polished wooden topsides, white fly-deck.

Mechanical : Side-Power bow thrusters, Pugaro diesel generator, anchor winch

Electrical : 12V and 240V systems, auto-helm, radar, Garmin gps chart plotter, TV, stereo system, VHF (x2), 3 x house batteries, 2x start batteries, inverter

Accommodation : 2 cabins, Master (double) and Guest (2 single)

Galley : 4 burner gas stove, microwave, gas hot water system, fridge, freezer

Tanks : Diesel – 1 x 650 litres; water 2x 350 litres (700 litres) both stainless steel. Black water holding tank 300 litres in welded plastic

NOTE: Boat builder Geoff Bagnall is not retired, just no longer has the shed in Milford Creek.

 

 

Blitzen

BLITZEN
photos ex Ken Ricketts. details anonymous (not KR)

The above photos of Blitzen were taken while hauled out at Gulf Harbour recently. There is a lot of dockside ‘stories’ about Blitzen’s past & ww would love to find of more about this vessel.
Said to be a Salthouse design.
Many moon’s ago a new owner was heading away on a xmas cruise & an engine blow off Northhead so they aborted the trip & returned to the marina. Vessel hauled out & then spent the next 5+ years in a shed during which time she underwent the most amazing restoration, its said that her interior is like a piano. The craftsman working on her would send one day on one floorboard.

Fast forward to relaunch day & someone commented to the owner that with that new cabin superstructure that had been added she would trip over. So Blitzen was parked on a marina at Orakai & never left the marina. Dates are lazy, but the fact that she is now at Gulf Harbour provens the merchant of gloom was wrong.

So woodys – what do we know about Blitzen & is the above true?

Summary of info from the comments section

John Salthouse’s much used note book states that 53ft Blitzen was launched Dec ’73 and was Salthouse Bros 89th build. She was built right way up, two diagonals and a fore and aft, red lead and rivots, no glue for Rex & Ian Heavens, of Heavens Farms Maramarua.

Blitzen was owned for years by the Velas, and Brian McCurrah did the big refurb, on their property, situated where Westgate is now.. He was/is very good. A kauri boardroom table he did for Lion Nathan head office, is now in the Kauri museum, next to Robert Brookes sailing dinghy.
She spent much time in Westhaven, then Westpark.
Blitzen is presently owned by Ian Midgley who lives at the Hibiscus Coast

Photo below Whangaroa 1977, ex Nathan Herbert