Category Archives: Working Boats

MV Friendship + The Solution To Boating Withdrawal

Posted on by
10

IMG_7312

IMG_7309

MV Friendship

 
Friendship was built on 1936 by Ernie Lane in Picton, South Island, for Tracy Gough, founder of Gough Gough and Hamer.
She is 50’ in length from kauri. Has been re-powered with a 471 Detroit. As built had an unknown 40 hp engine. 
We are told that once she had masts and sails and plainly, obviously before all the ‘fruit’ was added on the top of the wheel house.
Current home port is Napier. Thanks to woody Andrew Christie for the heads up and researching the item and photos.
 
AMAZING OFFER TO HELP KEEP YOU SANE 
 
I have purposely have given the CV-19 situation a wide berth on WW, every news channel is saturated with it and I figured you needed somewhere to get a break from the doom and gloom each day.
But as we head into week 2 of a minimum of 4 weeks isolation I have something that will help you thru these boat-less days. 
Every time I’m asked a question that starts with “How do I……..” Or “Who should I talk to about…..” I point them in the direction of the world’s premier classic boat video website. It’s called ‘Off Center Harbor’ and is the coolest source of intel on how to build, paint, or restore a boat, they also take you aboard some of the best boats in the world (including in NZ) and hang out with the owners. There are over 1,000 videos and articles full of inspiration and know-how.
 
WW Top Banner
 

Chatting with the guys at OCH Off Center Harbor they have come up with a special deal for Waitemata Woodys readers during this period of isolation and uncertainty.

They’ve created an 8-WEEK MEMBERSHIP with full access to the entire website at Off Center Harbor for just NZD$5.

So woodys if you haven’t already joined now’s definitely the time to jump aboard. You can CLICK HERE to get this membership now and enjoy full membership privileges for 8 weeks.

If you don’t enjoy it, you’re not serious about classic wooden boats, some videos I have watched 20+ times 🙂
WW Bottom Banner

Ngaire – South Island

Posted on by
6

Ngaio Nelson

Ngaire
The above photo was sent in by Lake Rotoiti (Rotorua) boat builder Alan Craig. Alan spotted the photo of Ngaire on a recent trip to the Maritime Museum in Mapua, Nelson. At the time Ngaire was owned by Jack Marusich and he is waiting for a load of sheep to be rowed out to the boat. I have to saw the sheep look remarkably relaxed given the trip. The photo caption commented that they were most likely used to it and were probably being relocated to fresher pasture.  Given the load it must have been a great dinghy.
Anyone able to tell us more about this launch?
And speaking of great dinghies – check out Martin Howson’s new clinker below, built late 2019 by Dave Jackson. She measures 8’ x 4’6” and It is built out of ply and ribbed and riveted, there is no glue. Her ribs are  North American white oak, the breast hook and the quarter knees are oak, the thwarts are kauri and knees for the thwarts are oak as well
The oars at 7 ft and Martin commented that you can really put your back into rowing or just tack it easy.  The floor boards are scribed and are easily removed
for cleaning and again they are made from kauri.
DSCN1926

Manunui

Posted on by
1

Screen Shot 2020-03-28 at 12.05.11 PM

Screen Shot 2020-03-28 at 12.05.28 PM

Screen Shot 2020-03-28 at 12.05.48 PM

MANUNUI

Todays’ story on Manunui comes to us from the ‘desk’ of Paul Drake – as always, well written so I’ll pass over to Paul.

 “Arriving at Taupo for our annual holiday one January in the late 1950’s, my brothers and I were intrigued to see a very unusual looking new commercial boat on the scene.   Before we knew her name, we kids called her ‘The Ugly Boat’.  She turned out to have a proper name – MANUNUI – after the saw milling town just out of Taumarunui.   It was there that she was built by the manager of said sawmill, Basil Maude.

Basil’s hobby was building boats, but he rarely got more than about three-quarters of the way through before losing interest.  MANUNUI was the exception.  He wished to see how big a boat he could build out of plywood.  He had the plywood made at his mill from selected timber.   Her bottom had two sheets of ply each twenty feet long , six feet wide, and one and a quarter inches thick. She measured 36 feet by 12 feet.

She had to be chunky and strong because Basil had two Allison Kittyhawk 12-cylinder aeroplane engines which he wanted to fit.   He designed and built the double gearbox himself.  It measured eight feet by three feet by two feet deep.   At the last minute the plan changed and the two gallons per minute Allisons were wisely ditched in favour of Ford V8s. But the gear box remained – larger than the two engines.   This most fascinating gearbox was mounted forward of the engines with the propeller shafts running back under the engines.   Chains were involved, and each propeller was operated independently of the other in the normal way.  MANUNUI was the first diesel powered launch on the lake (so it is said) and also the first commercial plywood boat to operate on the lake.

In the good old days when fishermen would club together and charter a launch for five day expeditions to Taupo’s Western Bay, MANUNUI was a very successful and busy charter launch under her very capable skipper Ron Houghton.

The original canvas arrangement over the aft end was eventually replaced with the rather functional effort shown in the second photo. In about 1970 a whole new cabin appeared.   Shortly afterwards MANUNUI was sold to New Plymouth.   I wonder if she survives?   Somehow I doubt it.

Much of this information is contained in ’Boats of Taupo’ by Charles Cox.

 

Lady Shirley

Posted on by
9

IMG_4935

IMG_4936

LADY SHIRLEY (Catherine S)

The above b/w photos show the then police launch Lady Shirley, the ’ship’ in the background is the Rangitata. The photo is dated 1940-49 and most likely taken by D. Marsh. The 36’ bridge-decker, Lady Shirley was built by C. Bailey & Son in 1938.
The first photo below I took at the 2020 CYA Classic Yacht Regatta. In the second photo she is her moored  in Opito Bay, BOI – summer 2019/20.
You can read / view more at the WW links below
IMG_4486 copy
Lady Shirley BOI Jan2019
02-04-2020 Update ex Greg Lees – Greg recently acquired this very cool ‘ship-in-a-bottle’ model of Rangitira
IMG_1691
Nigel Drake sent me the funny below – pretty well sums things up in our house.
image0
ISOLATION – Such stunning weather and no boating 😦
For a long time I have been ‘collecting’ old boat hooks, you can pick one up for $20>30. Normally the hook end is bronze and in good condition, a good polish and they look like new – to buy the head at Fosters would cost around $150. So today I started to give a few a make-cover. I have to say, what ever the old boys used to ‘varnish’ them with, is bloody hard to get off, lots of 80 grit did the trick.
I suspect this will be the last project before I get transferred to domestic duties e.g. working on the house 🙂

Moata

Posted on by
1

IMG_2437

MOATA
The above photo of Moata crossing the Grey River bar on Sunday (28-03-2020) was sent in by Dave Stanaways, Dave commented that they were luckily that both Grey and Westport are a lot shorter crossings than the likes of the Manukau or Kaipara bars.
The photo below ex Lew Redwoods fb is dated c.1940-1959 and shows Moata alongside the wharf in Auckland – Moata was built in 1937 by WG Lowe.
Screen Shot 2020-03-24 at 6.24.48 AM
For a work boat she has stunning lines 😉
See / read more on Moata at the WW links below
https://waitematawoodys.com/2018/04/04/moata/
https://waitematawoodys.com/2018/07/25/workboat-wednesday-moata/
WBB0003_Banner-980x160

Choptank

Posted on by
3

IMG_7308

IMG_7319

IMG_7320

CHOPTANK

Todays WW story falls into the eye candy category and will spin the wheels of the workboat group.
The 62’ Choptank was brought to my attention by Australian woody – Andrew Christie, who spotted her on the WoodenBoat Forum.
Built in 1938 in Virginia, USA by O.W. Payne Palmer and named – Julian.
Later name changes were – Callis Brothers, then – Crow Bros II.
She has just had a complete rebuild at the Eastern Shore of Maryland, where her name was changed to – Choptank.
Choptank is what they call a ‘Chesapeake Bay Buy-Boat’.
Make sure you check in tomorrow (Sunday) – great story coming u 😉
WBB0003_Banner-980x160

Wooden Boats @ Whangarei Town Basin

Posted on by
6

IMG_4671

IMG_4670

IMG_4681

IMG_4667

IMG_4688

IMG_4689

Wooden Boats @ Whangarei Town Basin

Two weeks ago David Cooke and myself pointed the car north and did a day trip to Whangarei to view a few candidates for listing with the Wooden Boat Bureau. We were blessed with a stunning day, which made the quay side area at the Town Basin very pleasing to the eye. As we mooched around I snapped the above photos. With the boats shed owners taste in decorating you cant miss them 😉
A nice mix of sail and power, with a lot of live aboards.
I was pleased to see James Mobberley’s old classic – Falcon on a pile mooring, one day she will come back to her home – the Waitemata 🙂
WBB0003_Banner-980x160

Marlin

Posted on by
9

Marlin a

Marlin c

Marlin b

MARLIN
Woody Baden Pascoe recently sent in the above photos of Marlin seen here in the top photo at Whitianga c.1968 after being re-powered with a Caterpillar 320. 
At this time she was owned by Alf Clow (photos are courtesy of the Clow family). Alf bought Marlin off Rolly Smith who used her for game fishing. It is believed that prior to Rolly Smith she was owned by the Thames Harbour Board (who went bust).
 
The thinking is Marlin was build by Sam Ford, but there is know knowledge as to the launching date.
The second photo shows the new Cat 320 being lowered into Marlin, seems a rather large donk for the size of the boat. Thence the last photo of her flying along with Clow family on board.
The dinghy on the stern is from the hands of Howard Pascoe 🙂
Any woodys able to shed more light on the history of Marlin?
Input from Barbara Cooke – Rolly Smith was my uncle. He purchased Marlin during the early years of WW11 for the purpose of deep sea fishing but due to government fuel restrictions this wasn’t permitted. He and his young family farmed at Fletchers Bay, top of Coromandel. After the war they returned to Whitianga where Rolly operated Marlin for chartering and game fishing. In later years his son Bruce skippered Tuatea, another game fishing vessel in Whitianga.

 
Input from Ross Dawson – Papers Past, Thames Star 11.3.1926 tells us…”the Harbour Board’s new launch Marlin, was brought down from Auckland on Tuesday by the Dredgemaster,..Mr Roche” and in the same newspaper 31 March 1926 says…”…the launch passed government inspection on 10.3.1926….fit to ply with 8 passengers within extended river limits when not towing and with suitable canvas over the cockpit, or with 16 passengers within river limits proper….length 31.75 feet, breadth 8.25 feet, depth 2.87 feet, horsepower 30-35, crew 2. Registered as “Marlin” …” So, no builder but it shouldn’t be too hard to find a reference to the launching about Jan – Feb 1926, in the Auckland newspapers.

The Thames newspaper notes Marlin being in Whitianga in 1933.

 
Input from Harold Kidd – Can’t say I was confident about my last posting. Did some more digging and found that the Thames Harbour Board commissioned this launch from Sam Ford as a towboat, largely used for their dredge. She was unnamed but was completed in early 1926. Her dimensions were 31’6″ loa, 8’3″ beam and 2’6″ draft and 2.87tons displ. Things can’t have worked out as she was up for tender in August 1928 (again unnamed). The Secretary of the Harbour Board was later charged with embezzling a large sum from the Board and it folded shortly afterwards.
So the memories of all concerned were absolutely spot on!
Now we have to sort out what her name was before it was changed to MARLIN. Lovely boat! How nice it’s Sam Ford. 
I’m just in the process of preparing a series of Boating NZ articles on him. This boat just shows the breadth of his skills at much the same time as WHAKAARI and before his Art Deco cruisers.
WBB0003_Banner-980x160

See Bee – Part 1

Posted on by
11

IMG_4663

IMG_4661

IMG_4662

SEA BEE – Part 1

On my trip up North this week I spotted Sea Bee berthed in the Whangarei Basin. Looks to be a very recent recipient of a conversion from work boat to cruiser.

Lovely lines and great use of colour.
Anyone able to tell us about her past?
Update ex Linda Holdaway – this is the same Sea Bee owned for many years by Ian Boyce.  She was designed and built by Harold Saunders, we’ve been told. Brett Stanaway bought her in 2014 from Steve Greasley up in the Kerikeri inlet and we worked solidly on her every spare hour we could find, and launched her unfinished in 2016. I went and talked with Ian Boyce while he was still alive. He said she was originally built in 1965 for a partnership between Dave Baker and George Cornwall and was called CB when launched. They bought 4 kauri trees in the Coromandel and had them railed to Saunders’ boatyard in Mana Harbour. 
09-04-2020 Input from Brett Stanaway
Below are a few photos of Seabee the day she was launched, a couple of her when she was still working and a couple of her the day we bought her. 
received_10153956404928603
FB_IMG_1475220053054
I know I’m A Nutter
Anyone else got all 8 editions of the CYA Classic Register? fyi – there is actually 9,
one was reprinted due to an embarrassing oops – and yes I have that one as well 🙂
IMG_4706

 

WBB0003_Banner-980x160