2018 Classic Yacht & Launch Exhibition – The New Zealand Sailing Dinghy

P1030700

P1030660

P1030690 2

P1030732

2018 Classic Yacht & Launch Exhibition – The New Zealand Sailing Dinghy

This years Classic Yacht & Launch Exhibition, hosted by Tino Rawa Trust, at Karanga Plaza in Auckland’s Wynyard Quarter, was a 3 day celebration of the New Zealand Sailing Dinghy.
The event showcased many of the successful designs that created our world class sailors & formed the backbone of your sailing clubs.
I went along on Friday morning to the opening morning tea 🙂 & rubbed shoulders with some of our wooden boating legends, these morning teas are always a special treat. We were entertained by another of Robert Brookes talks – always beautiful delivered & an entertaining insight into Auckland’s sailing past. If you have not seen Robert’s & the Brooke families latest book ‘Memories – Roads of Destiny’ (WW link below) grab a copy at Boat Books in Westhaven – its a must have / read.
I’ll let the photos tell the story of the show – enjoy.
Brooke Book Link

HMNZS Kuparu HDML

20160812_151538

HMNZS KUPARU HDML
I received an email the other day from Ken Ricketts which served to remind me I was overdue on a wee story on the ex ex Naval 22m patrol boat HDML Kuparu P3565. Her owner Scott Perry has been keeping me updated on the refit of this icon NZ Navy vessel. A fitting project as Scott is ex Navy.
Scott was at a T intersection in this life having recently lost his wife to cancer & thankfully a combination of Kuparu & his young family were the glue he needed to get thru a very traumatic period.
  
In Scott’s own words “Kuparu was a very big ugly mess of a job” but he rolled up the sleeves & with the help of some good friends (old & new) he re-launched her late last year.
Now the navy purists may not all agree on some of the mods but Scott is now the proud owner of a very large, comfortable woody cruiser. The ideal platform for the family to get out & about on the Waitemata Harbour & Outer Gulf & believe me they do, I have spotted them everywhere.
 
If you see Kuparu, give them a wave or if in a bay, row over for a chat & to admire the scale of the project Scott took on. Like all woodys, it never ends, so occasionally Scott posts on facebook looking for anyone keen on helping out with some maintenance – she is a rather large craft to do anything to e.g. clean, sand, paint etc.
 
Kuparu was very lucky to find an owner like Scott but the flip side is Scott was equally lucky with Kupara. Well done Scott.
 
(note below is a gallery of images that Ken Ricketts uplifted from a video on Lew Redwood’s fb page, I apologise for the quality – most often video > still photos = out of focus, I have tried to digitally enhance them but they are low quality, but from them you get a peek into the project  
 
 
As I was writing this story I received an email from a gent named Zaps Zander, who for the past 3 years has been running, compiling and administering a blog on  anything ML related i.e. from day 1 in 1943 to this month (the recent Black Watch sinking). Check out his weblog below – there are over 150 photos

Details below from the RNZN Communicators Association via Ken Ricketts.

LOA:  76′ Beam: 16′, LWL: 72′, Draft: 5′
Design or Class: W J Holt Admiralty World War II anti-submarine patrol craft
Former Name: HMNZS Pegasus P3563 > HMNZS Kuparu P3563  Q1348 WW2 number
Home Port: Auckland
Designer: W J Holt Admiralty
Boat Type: HDML, Gross Displacement: 54-ton
Number of Engines: 2, Engine Model: Mark 6 two-stroke Fodens, Total Engine Horsepower:  180-hp (each)
Builder Name: Ackerman Boat Company, Location Built: Lido Island, California, Year Built: 1943
Hull or Design No.: Q1348
Owner Name: Scott Perry, Owner Country: New Zealand
07-10-2018 Input from John Bullivant – just dug out a photo (below) of Kuparu I took probably about 15yrs ago when she was out the back of the Devonport navy base, by the Ngataringa Bay sports field. I was being watched closely as I was taking the photo by a couple of WRENS who probably thought I was after secret HDML information.
HDML P2563 KUPARU NAVY BASE

Lucinda 4sale

Screen Shot 2018-09-30 at 11.31.28 AM

Screen Shot 2018-09-30 at 11.34.48 AM

Screen Shot 2018-09-30 at 11.39.33 AM

Screen Shot 2018-09-30 at 11.38.52 AM

LUCINDA – 4sale

I have had a long vicarious association with Lucinda, myself & friends used to sit in the Devonport Yacht Club & look out at her moored in what appeared to be the main channel of Waitemata Harbour. I think we even took bets of how long before she sank, then one day Nathan Herbert rocks up, tracks down the owner & buys her. Her extraction & removal of her beard was covered off on WW her at the link below:

https://waitematawoodys.com/2014/03/11/lucinda/

Then she was towed to Milford Marina & hauled out for a 2+ years restoration (some photos from then included above). Nathan is an engineer & very fastidious so all the work was 120%. You can view her relaunch at the WW link below:

Lucinda Re-Launched

I do not normally do ‘long’ 4sale features on WW but (a) Nathan is a mate (b) Lucinda would have to be the best presented, best looking, value for money classic woody on the market. For $30k, you will be boating this coming weekend. And for the record, given the extent of the work done on her – I think Nathan is a little low on the asking price, it should be closer to $40k in my eyes.

And the question you are all most likely thinking – “Why is he selling?” – simple answer, he had the opportunity to purchase a classic woody that has been in his family for 100+ years, you don’t pass on something like that, so Nathan is back in the restoration mode.

My advice to anyone interested in her – buy her & quick, unlike most classic woodys, she will not be on the market for long.

Below is her story & details on the restoration project.

Lucinda was built in 1930 in Auckland by LC Coulthard and has a beautifully sound single skin Kauri hull with solid kauri cabin. With the help of classic boating experts, I completed a 2.5 year restoration/rebuild of her that saw her stripped back to bare hull and cabin sides, fully checked over and all other components rebuilt/replaced. Lucinda has covered over 1000 miles since relaunch in 2016. 

She is a good looker from every angle, is extremely roomy for her 27ft and uses very little fuel with her relatively modern diesel engine.

Lucinda is very seaworthy and with her high bow and V-bottom hull shape she barely rolls and rides over waves well. She is easy to manoeuvre and with her 2ft 6” draft it is easy to find safe anchorage close to shore!

All of Lucinda’s gear is built to last and top quality. 

Hull

Stripped bare inside and out and repainted in Altex system.

Kauri carvel construction with copper fasteners. 

Large pohutukawa knees throughout with extra large kauri knees in the bow area. 

All sawn frames re-fastened. 

Both bulkheads replaced, with extra sawn hardwood frames added in these areas. 

New solid Jarrah engine beds fitted.

All keel bolts replaced with large custom-made copper bolts.

Keel is solid kauri with no hogging.

Decks

Foredeck (bow area) stripped back to original laid kauri deck. Some planks replaced, then whole deck ply covered and fibre glassed over.

Side decks excellent condition kauri planked with solid pohutukawa belting. Stripped bare and laid over with new fibre glass.

Cockpit roof completely replaced with treated plywood and fibre glassed over. Other cabin roofs are sound, and fibre glassed already.

Cabin sides

Solid Kauri sides stripped bare inside and out and repainted in Altex system. Windows all removed and resealed with sikaflex.

Drivetrain

c.1990 Perkins Prima 50hp diesel rebuilt (new pistons, rebuilt block, crank, valvegear, head) by Taylor Automotive in 2017.

Borg Warner velvet drive 2:1 hydraulic transmission.

Solid bronze shaft. New custom- made 4 blade propeller to match.

Steering gear

New marine grade stainless steel rudder. Teleflex cable steering.

Solid bronze shoe from keel to rudder pintle

Practical and unobtrusive Garmin GPS/fishfinder etc.

Interior

All upholstery replaced, with double V-berth in bow and two singles in saloon area.

Sink and solid kauri bench / seating in cockpit. I have always used a portable gas stove and a portable compressor fridge for simplicity, which are not included in the sale.

Full headroom in the cockpit and bridge (very tall interior in bridge) and about 5’5” in saloon area. 

Marine toilet located underneath a lifting section of the for’d berth to starboard. 

General fittings

Solid bronze cleats, bow roller, electric anchor capstan etc etc. 

Manson Boss anchor with 16m chain, spliced to rope, very safe system.

Full-height varnished hardwood Samson post for anchoring. 

Oregon mast on bronze tabernacle.

Varnished hardwood grab rails.

Top quality fitted cockpit covers.

Automatic deluge-resistant ventilators on foredeck.

Varnished hardwood folding duckboard.Teak cockpit doors.

Electrical

All wiring replaced

High capacity deep cycle house battery with separate starting battery.

BEP switches with VSR, plus earth isolating switch. New alternator.

Auto bilge pump with small secondary pump if required.

All LED lights. Stereo with Bluetooth.

Watch Her Underway

And I’ll Finish On Some Plastic Boat Humour (sort of) down By The Boat Show  – not sure what happened but looks expensive.

Screen Shot 2018-09-30 at 9.15.04 PM

Screen Shot 2018-09-30 at 9.15.22 PM

And the other side – ouch 

IMG_2292

And Now On Film

Whitianga Mystery Launch + Akarana Launch Day ‘Home’ Movie

Whitianga 1950

Whitianga Mystery Launch + Akarana Launch Day ‘Home’ Movie
Great photo above dated December 1950 of a lot of pleasure craft at Whitianga – the question is can we ID the white launch in the middle of the photo? Baden Pascoe will chip in, I’m sure 🙂
The Launching of Akarana
I was sent the above 2 minute ‘home’ movie by Ngairene Rogers of the launching of the 1960 Auckland pilot boat Akarana, designed by A.J. Collings & built by W.G. Lowe. Ngairene promised me the a copy of the movie approx. 8 months ago & I was pleasantly surprised when it arrived in the post. I’m sure Dick & Colleen Fisher, owners of Akarana, will be rapt to view it. So thank you Ngarene for sharing it with us.
(sorry about the ‘tattoo’s the middle off the screen – the price you pay for free hosting)
Ngairene’s brother Wade worked on Akarana when he was an apprentice in the early 1960s. He also did all the interior and detail work on Deodar (the harbour police launch), Ngairene commented that Wade was such a good boatbuilder that all the wealthy “yachties” used to ask that he be the one to work on their precious yachts, even though he was an apprentice.
The movie is in two parts, one section in black and white and the other in colour. There are also a few of bits of the boatbuilders clowning around (or working?), such as putting a plank of wood into a steamer.
Ngairene occasionally is in contact with one of the apprentices (Ross MacIntosh) featured in the movie, Ross lives in the Auckland suburb of Mt Roskill. In the movie Ross is the one wearing a pale short sleeved shirt and (short) brown shorts with a hammer sticking out of the belt on the left side – he walks away from the camera at one point then looks back over his shoulder and bends his left arm backwards as if waving.
You can view/read more on Dick Fisher’s restoration of Akarana here

Rotorua Woodys + Goodsons Trucking

Boat_TruckRoad

Boat_TruckHotel

Boat_Truck_Goodsons

Rotorua Woodys + Goodsons Trucking

I have been contacted by Lesley Parker who is researching the Rotorua trucking firm of Goodsons Ltd. In the process of her research Lesley came across the above photos, & she is keen to learn more about them – dates, location, name of the launches etc.
The photos come from Lesley’s grandparents, who are Gregorys & coincidentally- her godfather was actually surnamed Goodson. He ran a tobacconists in Rotorua and was a friend of her uncle and her father.
There are two launches pictured above, one with a tram top & dog-house, and the other with a sedan cabin configuration, this one is named ‘Moose’. Given the location of the trucking firm (Rotorua) & the name Moose, I suspect the boat was connected to Moose Lodge?
Lesley also sent in the photos below of Goodsons logging trucks (same truck, different load), this photo may like jog some memories re dates

Harold Kidd Input – 

The 28 footer MOOSE was built by Collings & Bell for Noel Cole of Moose Lodge, Rotoiti in February 1939. It looks like she was railed to Rotorua and taken by Goodsons’ Ford V8 truck to Rotoiti. Her engine (unknown but probably a Gray, like BETTY’s) was right aft and used a Vee drive, then a novelty in NZ, the layout designed by H. C. Meikle.The Queen and Duke of Edinburgh used her when they stayed with (Sir) Noel at Moose Lodge.

Stunning Marlborough Sounds Location & Classic Woodys

39087723_2142733192715544_7482786370637791232_o

Stunning Marlborough Sounds Location & Classic Woodys

Todays photo comes to us via Lew Redwoods fb & is of Te Mahia Bay in the Marlborough Sounds. Its tagged C.M. Bay, so possibly they were the photographer.
Captured in the bay is an impressive collection of woodys, hopefully one of our followers with southern roots will be able to ID the craft for us.
The photo was used in a newspaper article (see below) promoting the Te Mahia Bay  holiday resort.
Screen Shot 2018-09-12 at 10.17.30 PM

Te Whara

P1180055

P1180042

P1010394

TE WHARA
 
Each year for the last 5 years in February I have attended the Lake Rotoiti Classic and Wooden Boat Parade, each year there are always several boats that ‘ring my bell’, one in particular is – Te Whara, the 32’, 1916 Bailey & Lowe built launch. Te Whara is not your typical lake boat, in my eyes she needs to be on the Waitemata & she could be – she is for sale. Firstly some details.
 
Te Whara was built by Bailey & Lowe at their yard at Sulphur Beach, Northcote in January 1916 for the Drummond brothers of Whangarei. Her first engine was a 10hp and probably a Sterling for which Bailey & Lowe were the agents. In February 1916 she was sailed up to Whangarei where she was based (always kept under cover). Originally flush-decked, Te Whara was taken back to Bailey & Lowe in the 1920’s where the wheelhouse area and companionway to the top deck was altered. She has the first rack-and-pinion steering ever fitted in Auckland. In 1972 she was refitted with the current 6 cylinder 106hp diesel which pushes her to around 10 knots. Owners Bruce Stewart and Andy Coupe purchased this launch (sporting a very rough paint job) in March 2005 for $40,000 and, after sailing her down from Whangarei harbour, spent a month sanding and repainting her at Orams in Auckland. After a short few months interlude in Auckland, Te Whara was launched at Lake Rotoiti in June 2005 and is now moored at Gisborne Pt. When searching for a launch, Bruce and Andy wanted a rear wheelhouse so that the helmsman and fisherman could be together. Of particular appeal was the elegant saloon, which runs from the engine bay to the bow. Te Whara still has the original interior fit out, including the porcelain ‘head’.
 
In 2013 Te Whara was lifted out of the lake and taken for a $25,000 re-paint and re-fit. The original canvas waterproofing on the decks was removed and the decks glassed. All other hull and deck timbers are original and in good condition. Unfortunately, being on a mooring and exposed to the weather takes it’s toll on Te Whara. In addition, Bruce and Andy are getting older and are beginning to find it more difficult to manage, and it is for these reasons that Te Whara is offered for sale for $35,000, or swap for a smaller classic launch.
 
I took the above photos of Te Whara at the 2015 & 2018 Parades. Come on woodys, lets bring her back to the Waitemata or alternatively she is a very cheap floating bach at the lake 🙂
 
Interested parties can contact Andy at.    andy@coupe.co.nz
 
 
 

15-09-2021 UPDATE – photos below sent in by Bill Upfold, whose client Grant Faber has one of Bill’s launches – Te Whara V, named after his grandfather, the original owner of Te Whara. Grant has named all of his boats Te Whara.
The b/w photos show Te Whara with Cape Te Whara (Whangarei Head) in the background. The photos are mounted on Grants saloon bulkhead.

Kotimana

117

116

IMG_1632

IMG_1633

KOTIMANA
On my last visit to the NZ Traditional Boatbuilding School I got chatting to one of the trustees – Kere Kemp & he casually dropped in that he was building a Dark Harbor 17 1/2’. Thats cool I thought & then I discover its being built in Port Hadlock out on the Olympic peninsula oppposite Seattle, Washington USA.
The yachts name is Kotimana – Maori for scotch thistle in recognition of Kere’s mother – Scottish, and his dad – Maori.
Kere commissioned her in September 2016 at the end of a post-retirement year at the North West School of Wooden Boatbuilding in Port Hadlock.
She was built by the classes of 2017 and 2018, & was launched at Point Hudson Marina, Port Townsend on August 29th. She is heading down under but with a few stops on the way – firstly Kotimana will be on display at the 42nd Port Townsend Wooden Boat Festival, second weekend of September and will then head via container to the 2019 Australian Wooden Boat Festival in early 2019 before finally making it home to Auckland in mid February 2019.
For those of you scratching your head thinking “what is a Dark Harbour 17-1/2 below is a description excerpted from a pre-launch write up that the NWSWB wrote when announcing the launch.
Dark Harbour 17-1/2

Originally designed for the Manchester Yacht Club in Massachusetts USA and called the Manchester 17, the first boats were built by the Rice Bros in 1908. As the design’s popularity spread it acquired a number of different names including the Bar Harbor 17 and eventually the Dark Harbor 17-1/2. The plans for this yacht are credited to BB Crowninshield and were completed by R. N. Burbank, an employee of the firm at the time.

 
The Dark Harbor 17-1/2 is a pure sailing machine of great beauty, but large enough to offer considerably more comfort through a larger cockpit well and a small cuddy cabin. Low freeboard combined with a wide, self-bailing cockpit well that seats you “down in” the boat puts you very close to the water. The lovely, slender hull lines, long ends, deep draft and large rig provide wonderfully sweet feel in this powerful, fast, wet, responsive and handy boat.

BB Crowninsheild was a US Naval Architect from the late 1800’s / early 1900’s who designed a number of boats including an America’s Cup contender and the largest ever steel hulled sailing boat (just prior to the introduction of the steam engine to sail boats).
Kerry commented that he fell in love with the lines of a Dark Harbor back in 2010 and decided that he would ultimately build one for himself.  Sanity eventually crept in and he commissioned her instead – Kerry was able to do some work on her prior to his move to New Zealand in mid 2017.
I’ll get a sneak preview of her at the Australian Wooden Boat Festival in Feb 2019 so will update this story with more photos.
Kotimana will be a magnificent additional to Auckland’s classic fleet.

The Restoration of Kate

The Restoration of Kate

I have been recently contacted by Bernard Rhodes in regard to the yacht Kate – I’ll let Bernard tell the story –

“From the 1860s onwards, sailing cutters, schooners and ketches gradually replaced Maori canoes as the principal means of transport around our coasts, till steamers in turn replaced them for passengers, and scows for bulk cargoes.

The Kate is a rare part of our nautical heritage, being one of only 3 of this once common type still in existence as far as we know. (Her near sister Rewa is displayed indoors in the Auckland Maritime museum, and the Undine is still sailing in the Bay od Islands).

When the Waiheke Working Sail Charitable Trust took over the Kate in 2013 she had a recently added cabin with full headroom and an 8” deep false keel. These made her suitable for conversion into a small sail training ship, giving today’s youth an opportunity to experience travel much as it was 150 years ago.

The restoration and re-purposing are now well under way – the work about 60% complete and the funding 50% with the big ticket items such as engine, sails and compliance to come.

We need another $60,000 to get her sailing.

The Kate’s history and an account of our progress can be found on our website, http://www.waihekeworkingsail.org, click on the brochure at the top. Much of her history was lost the last time she sank, but a surprising number of people have contacted us with stories of her, and we welcome any more.

Earlier this year we hauled her out a second time and fitted a lead ballast keel and new rudder, among  many other tasks. The addition of the cabin has raised the centre of gravity, and the boom needs to be above head height for safety, so the 1 tonne external lead keel will compensate, giving her adequate stability and near-original performance.

The accommodation has been designed for 6 trainees, a master and mate. We anticipate running 5-day Youth Development voyages for 13- to 15- year olds, based on the wonderful programme developed by the Spirit of Adventure Trust. With her relatively small size and simplicity, by the end of the voyage the trainees will be handling the ship themselves, under supervision. The sense of achievement and satisfaction they gain from this will stay with them for the rest of their lives.

Recently I re-connected with an old friend, marine artist David Barker, as he visited Waiheke on his launch “Feather”.

I talked of the vision of “Kate” as she will be, outward bound under full sail with a bunch of trainees aboard, and he agreed to do a painting encapsulating the dream.

I have long admired his talent for depicting boats and the sea, for giving an almost magical touch to a beautiful seascape, and I’m excited to be able to share this with you.

You are invited to subscribe to a strictly limited edition of 100 numbered, signed prints suitable for framing. $225.00 each.

When all subscriptions are sold, a draw of one number will win the original framed oil painting, generously donated by David.

This fund is to be spent exclusively on the restoration of the ‘Kate’ for youth sail training on Waiheke Island.”

For an informative card with bank details for payment, a ticket for the draw and for delivery of the print, please email your postal address to info@waihekeworkingsail.org.

Screen Shot 2018-09-06 at 12.06.22 pm

Harold Kidd Input – She was built in 1896 by Thompson & Sons as a sailing fishing boat, and owned successively by J.F. Smith, J Moros (1900) then as a launch by Morgan Bros at Helensville from 1913, Bill and Archie Curel from about 1920. They fitted a K2 Kelvin in 1932 and owned her until WW2 at least at Helensville. To say she’s a near sister of REWA and (by implication) UNDINE is pretty far-fetched (to be polite).

13-10-2021 Update – looking very smart, back under sail

Roamer

Scan0002

Scan0005

ROAMER
I was recently contacted by Anita Friedman in regard to the launch Roamer, which was owned by one of her father-in-law’s uncles, Frederick Louis Pierce Friedman, possibly from 1919 and to late in WW2.
In the photos above, the top one shows Roamer moored at Diamond Harbour, Lyttelton Harbour.
The hauled out photo, dated Labour Day 1940, was taken on the slipway at Lyttelton. At the time Roamer was still owned by Fred Friedman.
Anita’s understanding is that Fred Friedman entered ocean races, probably to Akaroa, in Roamer. (Refer the April 28, 1930 press clipping above).  He also was a member of the New Brighton Powerboat Club and moored the Roamer there.  He lived on Roamer.
When Fred died Roamer was passed to his nephew, Maurice Friedman. After Maurice was killed in WW2 the Roamer was sold.
Can any of the woodys enlighten us more on Roamer & what became of  her?
Input ex Harold Kidd – George Andrews of Redcliffs built the 40 footer ROAMER in 1911-2, possibly at Millers in Corsair Bay. Andrews ran her commercially as a passenger launch until he went off on the Hospital Ship MAHENO in 1915 in charge of the two donated motorboats aboard. Lawrence Joyce took her over and passed her to F. L. Friedman by 1927. By 2003 she was still in Lyttelton owned by Noel Norris and in 2011was for sale on Trade Me. So she still soldiers on it seems..
10-09-2018 Update from Dennis Rule  – Dennis was in Lyttleton on Sunday (09-09-2018) and spotted Roamer, a live & well & looking very sharp.
DSC01200