Kotimana

117

116

IMG_1632

IMG_1633

KOTIMANA
On my last visit to the NZ Traditional Boatbuilding School I got chatting to one of the trustees – Kere Kemp & he casually dropped in that he was building a Dark Harbor 17 1/2’. Thats cool I thought & then I discover its being built in Port Hadlock out on the Olympic peninsula oppposite Seattle, Washington USA.
The yachts name is Kotimana – Maori for scotch thistle in recognition of Kere’s mother – Scottish, and his dad – Maori.
Kere commissioned her in September 2016 at the end of a post-retirement year at the North West School of Wooden Boatbuilding in Port Hadlock.
She was built by the classes of 2017 and 2018, & was launched at Point Hudson Marina, Port Townsend on August 29th. She is heading down under but with a few stops on the way – firstly Kotimana will be on display at the 42nd Port Townsend Wooden Boat Festival, second weekend of September and will then head via container to the 2019 Australian Wooden Boat Festival in early 2019 before finally making it home to Auckland in mid February 2019.
For those of you scratching your head thinking “what is a Dark Harbour 17-1/2 below is a description excerpted from a pre-launch write up that the NWSWB wrote when announcing the launch.
Dark Harbour 17-1/2

Originally designed for the Manchester Yacht Club in Massachusetts USA and called the Manchester 17, the first boats were built by the Rice Bros in 1908. As the design’s popularity spread it acquired a number of different names including the Bar Harbor 17 and eventually the Dark Harbor 17-1/2. The plans for this yacht are credited to BB Crowninshield and were completed by R. N. Burbank, an employee of the firm at the time.

 
The Dark Harbor 17-1/2 is a pure sailing machine of great beauty, but large enough to offer considerably more comfort through a larger cockpit well and a small cuddy cabin. Low freeboard combined with a wide, self-bailing cockpit well that seats you “down in” the boat puts you very close to the water. The lovely, slender hull lines, long ends, deep draft and large rig provide wonderfully sweet feel in this powerful, fast, wet, responsive and handy boat.

BB Crowninsheild was a US Naval Architect from the late 1800’s / early 1900’s who designed a number of boats including an America’s Cup contender and the largest ever steel hulled sailing boat (just prior to the introduction of the steam engine to sail boats).
Kerry commented that he fell in love with the lines of a Dark Harbor back in 2010 and decided that he would ultimately build one for himself.  Sanity eventually crept in and he commissioned her instead – Kerry was able to do some work on her prior to his move to New Zealand in mid 2017.
I’ll get a sneak preview of her at the Australian Wooden Boat Festival in Feb 2019 so will update this story with more photos.
Kotimana will be a magnificent additional to Auckland’s classic fleet.

A Woody Workshop

Screen Shot 2018-07-25 at 10.19.00 AM

Now Here Is A Very Cool Idea – A Woody Workshop
There are a few woody hidden treasures in & around Auckland – some we keep under the radar & some deserve to be hauled up the mast so everyone knows. One of the coolest is the New Zealand Traditional Boatbuilding School. A lot of you will have rubbed up against the NZTBS when it was housed at the old Hobsonville Air Base, but with the redevelopment of the base, NZTBS was moved to a new home & these days has a tighter focus on its reason for being.
 
Now to some of you the word School breaks you out in a cold sweat, if I ran the place I’d change the name to NZ Wooden Boat Workshop, because these days thats what it is – a workshop where you can get hands-on experience in some of the skills that a true woody needs to know. I encourage you to visit their weblog to check out the new courses (see below) that have just been announced  http://nztbs.org.nz 
  • Veneering, Inlay & Marquetry
  • Ribbing, Steam bending and replacing Ribs.
  • Clinker planking. fitting new or replacing old planks.
  • Tuesday Workshop days
But woodys, what I really wanted to draw your attention to was what the NZTBS call the ‘Tuesday Workshop’. 
Not all of us are blessed with a workshop or the tools to undertake simple maintenance on our craft – the NZTBS have a solution – they have opened the workshop up on Tuesdays (from 10am > 2pm) & will have a couple of serious woodys on-site – Allan Hooper and Kere Kemp. So come along and either help them with the latest project they are working on or if you have a little job of your own or perhaps need a piece of timber sized or just some advice, pop along for a chat.
 
I dropped in on Tuesday, with a project under my arm & walked away a happy chappie. While there I spoke with the Allan Hooper & Colin Pawson about Allan’s latest project. Some of you may be aware that in a past life Allan created a male mould of the Townson 2.4 dinghy, & from this approx. 10 cold moulded / laminated dinghies were built. On top of this an additional approx. 250 fibreglass dinghies were built – so without a doubt Allan holds the record for the most Townson’s built 🙂
A little while ago, Allan crawled under the house & dragged out the original mould, pictured below being repaired at the NZTBS.
The next step is that Allan will be using the mould to build himself a light-weight (frame less) clinker (ply) dinghy, I’m sure his arm could be twisted to allow a woody or woodys to build another or several, maybe there are enough people interested in a forming a class.  
P1030529
P1030532
Heads Up On A New Book From Robert Brooke
Talking with Robert mid-week & I’m stoked to be able to announce on WW that Robert is days away from the release of his new book on the memoirs and drawings of his late father Jack (John) Brooke. More details soon.
 
Now I couldn’t let the day go by without a woody photo – the photo below has appeared b4 on WW but in a much poorer reproduction. Dated c1930s, it shows Colin Wild’s yard at Stanley Point, Devonport – a very impressive line up of woodys. (photo ex Keith Humphrey)
1930s approx. Stanley Point Devonport Colin Wild Boat Yard