CLASSIC LAUNCH TAINUI – RELAUNCH DAY DRAWS NEAR

CLASSIC LAUNCH TAINUI – RELAUNCH DAY DRAWS NEAR

WW has been following the restoration of the 38’ 1967 built classic launch – TAINUI for several years and as we can see from todays photos from Blair Boats, the big day is not too far off. Wonderful work being done and owner John Sloane must be over the moon.

Lots of previous WW stories covering her past, but looking at todays photos its hard to believe she was once a Harbour Board workboat. 

Check out the previous updates at this linkhttps://waitematawoodys.com/2025/02/17/restoration-of-classic-launch-tainui-update/

Photo below from ‘way back’ 🙂

A QUESTION FOR WOODY BOATERS – Why have a mast on a classic motor boat

A QUESTION FOR WOODY BOATERS – Why have a mast on a classic motor boat*

Can You Spot The Difference Between The Two Photos Above Of SKIPJACK ?

*It is something I get asked a lot, mainly when someone is restoring a classic wooden launch and trying to decide if they should reinstate the wooden mast that they have seen in older b/w photos. My answer is always yes and this based on the belief the mast was never about sailing power — it served practical, traditional, and aesthetic purposes. It was used to hoist navigation and signal flags, support lights or an awning, and sometimes rig a small boom for lifting dinghies or stores. A few launches even set a steadying sail to ease rolling in a swell. 

But most importantly, to me, reinstalling a mast preserves originality and gives a launch a proper profile and balances her shape — and adds character. So in short: not for sailing power, but for utility, stability, and looks.

Still on the topic and focussing on the area of stability, during the week Greg Billington the owner of the 1918 Chas Bailey built launch – SKIPJACK contacted me following up on the story we did on SKIPJACK. Greg had two things he wanted to share – 1. SKIPJACK was no longer for sale, he had seen the light and decided to keep her ✔️ – we liked that.

And 2. Share a recent experience around masts on old classic launches – I’ll hand over to Greg to tell the story:

“I thought I would share something that may be of interest to readers. Along the lines of ‘a little knowledge is a dangerous thing…’

I was offshore on one occasion when a beam sea knocked the boat over such that I had this thought – ‘that heavy wooden mast must go.’ I had this thought because it appeared that bringing the mast back up was an issue. It wasn’t, obviously. Nevertheless, I thought I would lower the centre of gravity and improve the righting moment with a shorter, lighter mast. So, I installed an alloy mast, which did make the boat significantly stiffer, but sometimes more than I wanted. 

After much thought and further reading, I decided that the original wooden mast must have made the boat more tender i.e. slowing and dampening roll and therefore making for a more comfortable ride. Guess what? It did. So, I am attaching a couple of pics showing the alloy mast, and then the old wooden mast back where it belongs and I can say that the motion in any sea is considerably improved. Which goes to show, and I don’t mind admitting, that the boat builder knew far more than me.”

And woodys for the record the 2nd photo above is the wooden mast 😉

RSVP – boat name to waitematawoodys@gmail.com

CLASSIC LAUNCH FEATHER GETS SOME TLC

Happy Owner

CLASSIC LAUNCH FEATHER GETS SOME TLC

Todays story is stepping over the self imposed Berlin Wall of classic craft – you see FEATHER has DNA dating back to 1912 when the Arch Logan designed 33’ DOREEN and then fast forwarding to the early 2000’s when Eric Knight started making the L33 fibre-glass replicas off a mould of DOREEN.

The concept appealed to FEATHER’s owner but he commissioned some tweaks – like forward motion from a 4-stroke outboard and an awful lot of at the time wonder material – think carbon fibre. End result was the very special craft we see today.

In the USA there is a new word appearing at some of the classic regattas – its ‘GLASSIC’, and is used to describe craft that appear to be old, wooden, classic craft but are made from f/glass. In my eyes a classic is wooden and always will be.

 I’m sure the fisheads that sit on the classic yacht association steering group will one day soon, in their hunger for dollars to fund their yacht races, tweak the membership criteria and allow GLASSICS to join up. Rest assured WW will stay pure 🙂

Back to FEATHER – after several weeks hauled out at the Slipway Milford getting some serious TLC that included a JPPJ* – she slipped down the railway slipway back into the Milford Creek on Thursday looking better than new. (*Jason Prew Paint Job) Photos & videos – Cam Malcolm, Jason Prew and Alan H)

CLASSIC WOODEN LAUNCH – MOOSE – RESTORATION UPDATE #2

CLASSIC WOODEN LAUNCH – MOOSE – RESTORATION UPDATE #2

Last Wednesday we did an story on the TCL work boatbuilder Alan Craig had done on the classic wooden launch – ALPHEUS. During the chat with Alan I nudged him for an update on the 28’, 1938, Collings & Bell built – MOOSE restoration, and today woodys we get to share what’s been happening in the Craig Marine shed.

Links below to the previous stories, including the extraction of MOOSE from her lake front boat shed.

WW May 8th https://waitematawoodys.com/2025/05/08/classic-launch-moose-a-sneak-peek/

WW May 26th https://waitematawoodys.com/2025/05/26/classic-launch-moose-on-the-move/ As seen in the gallery of photos Moose is well under way. Plenty of rib and rot repairs done and as Alan commented ‘undoing the sins from years of repairs’. 

With the likelihood of a new Yanmar engine, the old unit has come out. The plan is to try and use the existing V drive. 

As MOOSE will end up out on a Jetty most of the time, the cabin roof will be getting a protective layer of f/glass. Alan remarked that while it seems a shame to cover the nice tongue & groove roof, they want MOOSE to live on many more years yet.

Now that she is in a cradle the boatyard team can attack the underside and are starting work on an interior layout. 

DAVEY JONES NEW BOOK QUIZ WINNER – JAMES HUTCHINSON. Congratulations to James, for all those that missed out – copies available at daveyjonesofwakatahuri@gmail.com

FATHERS DAY SORTED FOR ANYONE WITH SALT IN THEIR VEINS

FATHERS DAY SORTED FOR ANYONE WITH SALT IN THEIR VEINS

Rarely these days do I pick up a book and can not put it down – well it happened recently. I received an advance copy of Davey Jones just published book – ‘Davey Jones of Wakatahuri’ and its both a cracker read and an amazing account of his boating life and his interaction with the Wakatahuri region. Now I’m sure some of you will be asking yourself ‘ where is that?’ – well its in the outer Pelorus Sound at the top of the South Island, the Marlborough District (refer chart below). The area has been many things to many people – a fish factory, a boatyard, a ship breaking base and a community hub.

Davey Jones arrived at Wakatahuri as a young fisherman in 1956 and still lives there today , on and off when he’s not lapping NZ in his boat.

It’s an additive read that with the help of over 200 photographs will have you hooked. 

And as a bonus – included is a reprint of an equally wonderful read -’Sounds Wrecking Co.’ by Martin Burthold.

So woodys drop a hint to the family re what you want for Fathers Day (Sept 7th) or just order one for yourself – $60+ p&p – all enquiries to daveyjonesofwakatahuri@gmail.com

AND I HAVE A COPY TO GIVE AWAY – just answer correctly the name of the vessel Davey Jones has most recently been lapping NZ on. Enter ONLY via email to waitematawoodys@gmail.com all correct entries go in the draw. Closes 6pm 17-08-2023.

AND THERE ALWAYS HAS TO BE A BOAT PHOTO – this is from Davey’s book and shows the work boat MARLBOROUGH PN47, in Picton Harbour c.1929, built by E R Lane. In the background are VALMARIE, at left, and Ernie Lane’s boat shed, the Picton Rowing Club sheds at right. The vessel under repair at Lane’s yard is a lighter from Port Robinson (Gore Bay)

FAMOUS UK SAILOR TOURS NEW ENGLAND – USA

FAMOUS UK SAILOR TOURS NEW ENGLAND – USA

One of the many classic boating channels I follow is the very popular small dinghy cruising guru Roger Barnes, star of his own highly popular YouTube channel (link below). Roger recently visited the USA, primarily to promote small dinghy cruising at the recent wooden boat show at the Mystic Seaport Museum.

In the 20 minute video Roger gets to sail on numerous cruising dinghies, visits boatyards and mooches around many port towns . The journey started in Maryland, Washington DC.  and finished in Maine. 

Sit back and enjoy a tour of the wooden boating scene in North America, and woodys it’s not all about dinghies 🙂

LINK TO ROGER BARNES YOUTUBE CHANNEL  https://www.youtube.com/channel/UCtzWwFEMaEVXejzRKgPjPNA

CLASSIC WOODEN LAUNCH ALPHEUS FINDS A NEW LAKE HOME – AND SOME WELL EARNED TLC

CLASSIC WOODEN LAUNCH ALPHEUS FINDS A NEW LAKE HOME – AND SOME WELL EARNED TLC

How’s this for a spot of serendipity, or maybe just Siri listening in 🙂 

Yesterday I was chatting online with Alan Craig at Craig Marine, the central north island master boatbuilder / restorer about the 42′ classic wooden launch – ALPHEUS. Craig mentioned that they had recently completed some work on her a few months ago. Mainly TLC, tidying up some of the bright work and a few repairs. 

These days home for ALPHEUS is Taupo, at the marina down in Turangi. Craig commented that the location was definitely not the place to be doing that kind of work in autumn but they were lucky with the weather.

Then bingo today on WW in the comments section a gent named Brian Murphy mentioned he owned ALPHEUS from 1992/3 until he sold her to Ian and Rosalind about 2015. Brain’s family has huge memories of a superb ownership and many enjoyable summers.We used to moor her on D52 at Gulf Harbour. Last I heard of her she was on Lake Taupo as a live aboard (edited) 

Back in the early days before the demise of the classic yacht association motor launch division, Ian Rosalind and ALPHEUS were regular attendees at the multitude of events we hosted. Very happy to see she has a new life on the lake.

View more photos here from a June 2020 WW story https://waitematawoodys.com/2020/06/04/alpheus-a-peek-down-below-lady-ava-sinks/

Photo below showing the TLC was overdue 😉

CLASSIC BOATERS GATHER FOR A SUNNY DAY OF SWAPS AND STORIES

CLASSIC BOATERS GATHER FOR A SUNNY DAY OF SWAPS AND STORIES

Saturday delivered a cracker of a day in Auckland – crisp early on, but soon warming into blue skies and sunshine. Ideal conditions for a classic wooden boat gathering, even if this time we stayed firmly on dry land.

The occasion was the (almost annual) Woody Boat Boot Sale held at The Slipway, Milford – and frankly, you’d struggle to find a better venue. A special thanks to Cam Malcolm and Jason Prew for hosting us and for hauling out a few beautiful craft for close-up inspection. It added a real bonus for those who came for more than just shopping.

We had over 18 vendors on site, offering up a treasure trove of marine goods – everything from tiny cleats and chain plates to sails, bronze winches, stoves, and more. From what we saw, plenty of deals were done and everyone left with something – if not in hand, at least with a smile on their face.

It was also great to see so many familiar faces from the classic boating community. Events like this are about more than gear swapping – they’re about connection, community, and strengthening the bonds that keep the wooden boat movement alive and thriving. (photos yours truely & Geoff Fiebig)

Next Up: Mark Your Calendar – September 20th > 21st

Our next gathering is set for September 20th, and this time we’re heading back on the water – cruising up the Wairoa River to the Clevedon Cruising Club for an overnight dockside shindig. Expect a BBQ, live music, and the usual top-notch company. It’s always a highlight – more details to come soon, but lock the date in now.

TAREE – OWEN WOOLLEY CLASSIC LAUNCH RECEIVES SOME TLC

TAREE – OWEN WOOLLEY CLASSIC LAUNCH RECEIVES SOME TLC

While walking the docks at the recent Classic Woody Boat Show at the OBC I bumped into boatbuilder Colin Brown, who mentioned the recent work his son-in-law Josh Hawke (Kauri Classics ) had undertaken on the 1966 36’ Owen Woolley built classic launch – TAREE.

TAREE was in the Kauri Classic shed for work to her running gear e.g. new shaft log and floors + some planking work.

Check out the fb video at the link below.

https://www.facebook.com/share/r/1BB1XuaWUU

BOAT BOOT SALE TOMORROW (Saturday) AT THE MILFORD SLIPWAY BOAT YARD

We have an impressive number of woodys turning up to off load their excess goods, and given what I know about them, I suspect there will be some real bargains on offer. Remember to bring cash, but I’m sure bank transfers will be fine for larger ($) items.

DATE: SATURDAY 02 AUGUST

TIME: 10am > 12pm

VENUE: 5 Omana Road, Milford

ONE MAN, ONE CRAFT – IS THIS SPAIN’S LAST REAL SHIPWRIGHT

ONE MAN, ONE CRAFT – IS THIS SPAIN’S LAST REAL SHIPWRIGHT

Good friends Pauline and Tim Evill escaped the rain and cold of NZ and have been mooching around Europe. Tim dropped me a note about a famous old boat builder known as Pepe de Pacho, in Castropol in Asturias, northern Spain who was the oldest member of a family of wooden boat builders that had been working on the Rio EO from the same tiny boatyard for almost one hundred years. 

After a visit to the boatyard, where no one was home, he headed to the marina and managed to track down the old man after much detective work. It was a wonderful experience. A asked Tim to pull a story together – which today we great to share. 

In Tim’s words – “As we travelled along the magnificent coast of Asturias, passing one beautiful seaside town after the other, I decided to go looking for a legendary character whom I had read was revered as the last traditional shipwright in the area—Pepe de Pacho. After numerous false forays and clumsy attempts with Google Translate, we finally fell upon a group of salty sea dogs who got on the case for me, called around, found Pepe at home having lunch and wrangled an invitation to the great man’s house. 

Now retired from building full-size boats, Pepe de Pacho or Pepe as he is known, turned his talents to the most intricately detailed model boat building. The exquisite samples of his work are now displayed in part of his home in a small museum. There, he continues to build his intricate wooden models and keeps the tradition alive in miniature. 

When a couple of curious Kiwis suddenly turned up armed with nothing more than eagerness and spanglish he was extraordinarily magnanimous and generous with his time—even though he spoke barely a word of English. With a permanent smile,he took his time to show us around whilst describing the history of the original of each model whilst I smiled and nodded and sadly caught only about a tenth of what he regaled me with.

After about an hour of awe struck admiration of his entire collection of over 90 boats, we shook hands, posed for photos and bid a fond farewell to Pepe and his lovely wife. A modest man of immense talent and irreplaceable knowledge and craftsmanship. 

As we left Pepe advised us to go and learn Spanish and come back again! Every boat has its own story, he said, and without the language, we’re missing too much history.”

Below we have the story of Pepe’s very salty life – its a great tale, I hope you enjoy the read. (as always you can enlarge the photos by clicking on them)

Pepe de Pacho: The Soul of the Asturias Boatbuilding

Tucked along the estuarial shores of the Río Eo in Asturias lies a living relic of Spain’s maritime past—not in a grand museum, but in the humble home of Pepe de Pacho, one of the last true carpinteros de ribera, or traditional boatbuilders, in the region. Born José Félix González Vijande in 1946 in the coastal town of Piñera (Castropol), Pepe inherited more than a family name—he inherited a calling.

Roots in the Ría del Eo

Pepe’s journey into the world of boats began not in a classroom but at the workbench. His father, Marcelino “Pacho” González, established Astilleros Pacho in 1944—a modest shipyard that would become the heart of a multi-generational tradition. By the age of 14, Pepe was apprenticing alongside his brother Carlos, shaping timber and learning the rhythms of the tides and the wood grain under his hands. The workshop, later relocated to Berbesa on the Eo estuary, became a vital node in a once-bustling network of small boatyards lining the Asturian coast.

Throughout the mid-20th century, the Pacho yard built robust wooden vessels for fishing fleets from Galicia to the Basque Country. The craft they were most famous for were the handbuilt, Lateen sailed ‘Pacho’ boats. 6 metres long traditional Cantabrian sailing boats with a rounded hull and folding centreboard that have become the favourite class racing boat of the region. These weren’t just pleasure boats—they were lifelines for coastal communities and the main form of local transport carrying salt, wine and produce for centuries.

Reputation for Mastery

Pepe earned a quiet but steadfast reputation as a craftsman of integrity. Among those in the know his boats were prized and desired for being incredibly seaworthy and superbly built. He possessed an intuitive understanding of how wood moved with water. Colleagues often noted how he could “read” the timber—knowing by touch alone if a beam would flex too much under pressure or hold fast in a swell.

But it wasn’t just skill with tools that defined him. It was his dedication to keeping the traditions of Asturian boatbuilding alive in an era increasingly dominated by fiberglass and mechanization.

A Shift to Miniature, Not to Retirement

When Pepe finally retired from full-size boatbuilding in the 1990s, many assumed he would quietly fade from the maritime scene. Instead, he pivoted into an entirely new phase of artistry: the construction of model boats, each one a precise and poetic tribute to the vessels he once launched into the Cantabrian Sea as well as noteworthy craft from all over the world.

“I retired many years ago, and these are the only boats I build. All my life I worked in the shipyard founded by my father, Marcelino, known as ‘Pacho’. Now it’s my nephew Martín, who’s in charge of it,” explains Pepe as he shows us each of these scale replicas of ships that once left his shipyard, some of which can still be seen sailing the Eo estuary. 

Using the same materials—local chestnut, pine, iroko—and the same techniques, Pepe began to produce handcrafted miniatures that mirrored real historical ships down to the finest plank and rivet. His first model, built in 1977, was merely a curiosity. But in retirement, he dove into the practice in earnest, creating over 90 unique pieces, many of them now on display in a personal museum in his home. The construction process is exactly the same as that followed in the construction of a real boat: it begins with the keel, placing the frames, fixing the stem and sternpost and nailing the sheathing planks, continuing with all the elements that go in the interior and from the deck upwards, especially the rigging and sails, made by the no less skilled hands than those of his wife Mirita

These models aren’t toys—they are scaled time capsules. From traditional fishing boats and rowboats to, English Tugboats and legendary schooners like El Industrial, Pepe’s work captures an exact scale model of history in each perfect centimeter of wood and rigging. Every curve tells a story, and every example is the result of countless hours of painstaking labor. 

What a pleasure it was to meet Pepe who is understandably proud of his incredible body of work, and sustifiably so. But he was also so delightfully humble when I praised his astounding craftsmanship and meticulous work. Pepe is always eager to share his passion for boats big and small and anyone who wants to see his ‘museum’ here, at his home, just has to let him know before coming. Visits are free. Good luck.

A Legacy Beyond the Eo

Though he remains modest, Pepe has quietly become internationally respected in maritime heritage circles. His models have been featured in exhibitions, publications, and even cataloged in a book authored by his brother-in-law, Ignacio Vares. His daughter Aida created a website to showcase the collection, ensuring these vessels—both large and small—remain accessible to future generations.

Local efforts to preserve his legacy continue. The town of Castropol is preparing a new edition of the book chronicling his work, recognizing not just Pepe’s craftsmanship but his cultural importance as a living link to an endangered maritime tradition that fortunatley still lives on, in the capable hands of Pacho’s nephew at the same little shipyard on the banks of the Rio Eo where little has changed for one hundred years. 

For more details, see: https://astillerospacho.com/inicio/ https://www.guiarepsol.com/es/viajar/nos-gusta/carpinteria-nautica-artesanal-visita-al-taller-de-castropol-asturias/ https://pepedepacho.wixsite.com/maquetas/maquetas