Rosemary M

P1190145

Screen Shot 2019-09-06 at 9.38.27 AM

Rosemary M – 4 Sale

Rosemary M is a 1915 Lanes built launch, constructed of carval planked kauri hull and top sides. Powered by a 1986 Yanmar, 80 horse power, 4-cylinder, diesel inboard engine, that gets her along at a top speed of 14 knots.
She was appeared numerous times on WW and has just come on the market after being overhauled / repaired by the Pollard Brothers after a wee marina oops, where a piece of floating plastic mistook his throttles for his gearshift and clipped the side of Rosemary M with his duckboard.
Like most Pollard boats 🙂 she is structurally and mechanically very good, just needs a steady hand with a paint brush to get her ready for summer.
Rosemary M would make a great entry level woody for someone wanting to join the wooden boat movement + the Yanmar is a bonus i.e. 14 knots !!
MAYBE WE MIGHT SEE HER MAKING AN APPEARANCE AT TOMORROWS WOODY CLASSICS WEEKEND – RIVERHEAD TAVERN CRUISE ????????
Links below to view her previous story on WW + recent video of her underway

WOW

Screen Shot 2019-09-06 at 8.11.47 PM

Aurora

Screen Shot 2019-09-05 at 9.19.53 AM

Screen Shot 2019-09-05 at 9.18.36 AM

AURORA

Aurora was built in Johnsons Boat Shed Nelson in approx. 1935, measures 20’ in length and clinker built. For several years Aurora was used to tender explosives from the magazine on the Boulder Bank to the construction crew building Rocks Road. Subsequently she was then used a pleasure boat for fishing and family excursions.

The history from then on is unknown until her owner discovered Aurora in a barn in rural Nelson in February 2011. Aurora was purchased and transported to Redwood Valley where the restoration began. Aurora remained upside down for quite a few years whilst numerous planks were repaired using mainly recycled Kauri, a new keel was laminated out of Macrocarpa, the transom rebuilt and many of the copper fastenings replaced. The hull was then faired/sanded and repainted. Eventually Aurora was turned upright and the interior work began. Many hours were spent scrapping away years of old paint before several coats of primer and top coat paint were applied. The floor frames were shaped and fitted, a new Bronze shaft log and engine mounts fitted. A new rudder and duck board floors were constructed. Whilst the deck appeared to be in reasonable condition it was decided to remove the entire decking back to the frames. Three layers of 4mm Plywood were laminated together as the base and 6mm Kauri strips steamed [where needed]and glued onto the base. An overhauled c.1950, Stewart Turner P55M 8hp petrol motor was fitted.

When Aurora was purchased the trailer was simply a beach launching trailer, i.e. no suspension.The trailer was extensively modified and galv. coated to suit the refurbished Aurora, was the 2019 winner of the Jens Hansen Cup at the Antique and Classic Boat show, Lake Rotoiti, Nelson. I was there and can vouch for the standard of workmanship that has gone into her, simply stunning. Home is Nelson in the South Island and she is currently for sale on trademe (thanks Ian McDonald).

Aurora would be the perfect day boat for this Sundays Woody Classics Weekend cruise to the Riverhead Tavern 🙂
 
Sundays Woody Classics Weekend – Riverhead Tavern Cruise
Later today I’m emailing details to the people that have rsvp’ed for Sunday’s cruise, if you forgot to reply or are just one of those people that like to turn up on the day – no problem click on the email link below & I’ll send you the plan for the day. Remember if your boatless, come by car, its only 30mins from downtown Auckland.
waitematawoodys@gmail.com
WCW WW Poster

Caroma / W1

MVC-018S

MVC-016S

Caroma / W1
 

Recently I was contacted by Peter Grant who had just discovered the story of W1 on waitematawoodys and remembered he was involved in a pre-purchase inspection of her in November 2000 for a client. The client did not purchase the vessel as it was deemed not suitable, but Peter dug out the old report which included the photos of her above, as she was then lying alongside the Panmure River.

 

Below is a photo of the 70′ vessel as she is today, post a wonderful restoration to return her to a style that while not matching her early day war time look, certainly turns a few heads on the Waitemata when she zips past at 22 knots. WW links to the restoration below:
 
Screen Shot 2019-09-03 at 8.54.04 AM

Irene – A Peek Down Below – 4sale

Screen Shot 2019-09-01 at 4.26.00 PM

Screen Shot 2019-09-01 at 4.27.27 PM

Screen Shot 2019-09-01 at 4.27.14 PM

IRENE – A Peek Down Below

Back in Feb 2016 I did a brief story on the 39’ Orams launch – Irene, based on a photo that Pam Cundy from the Whangateau boat yard snapped while cruising at Great Barrier Island. WW link to story below

Irene was built in 1955, is 39’4” long with a beam of 10’9” and draws 3’3”. Powered by twin Ford (Lees Marine) 75hp diesels she has a top speed of 10 knots.
At the time of the last story I ‘commented’ about Irene’s penthouse.
Below are a couple of penthouse interior photos, I have always wondered what goes on up there on these boats………. And a very crude photo of her with a top chop 🙂

Kotuku

Screen Shot 2019-08-28 at 5.29.51 PM

Screen Shot 2019-08-28 at 5.29.29 PM

Screen Shot 2019-08-28 at 5.29.16 PM

Screen Shot 2019-08-28 at 5.30.28 PM

Screen Shot 2019-08-28 at 5.30.39 PM

Screen Shot 2019-08-28 at 5.30.18 PM

Screen Shot 2019-08-28 at 5.31.13 PM

Screen Shot 2019-08-28 at 5.29.02 PM

KOTUKU

Kotuku was designed and built by Milford boat builder Alan Williams in 1960. She measures 32’ with a 9’ beam. Power is from a BMC Commodore diesel that was new when launched.
The bridge decker is kauri carvel built and has recently changed hands after a lengthy period on trademe. New owner’s Todd and Catherine sent in the photos above of her recent TLC.
Can anyone tell us more about Kotuku’s history.

Input from Mark Erskine‘Reviewing the above photos, in particular the ‘work in progress’ one, I see a note on the engine photo that the owner has used 5W 30 synthetic oil in the engine and gearbox.

Generally, older diesel engines have larger internal clearances than modern engines and (generally), a 5W 30 synthetic engine oil is used in a modern, close tolerance, high revving petrol engine. 

Older diesel engines have piston ring, cylinder liner and bearing materials that require a basic, heavier viscosity, mineral oil, such as a heavy duty, high detergent / dispersant / SAE30, SAE40, 15W 40 or 20W 50 grade.

I recommend the owner contacts either Castrol or Shell technical services for their lubricant recommendation for that particular engine and the gearbox.Tthere are a lot of old diesel and petrol engines in older boats and using the wrong oil can damage the engine.’

 

 

 

Blue Seas

IMG_2204

IMG_2198

IMG_2199

IMG_2196

BLUE SEAS

Blue Seas was built in 1965 by Ship Builders. LOA is 30’ and get up and go is via a very impressive Yanmar 90hp turbo diesel engine.
Can we expand more on her past?
Woodys attending the Woodys Classic Weekend pub cruise to the Riverhead Tavern on Sept 8th will get to see her up close because owner Ollie Olaf Askham is a confirmed attendee 🙂
27-01-2022 Update ex David Cooke – spotted off Motuihe Island
WCW Riverhead2019

Miss Rose

IMG_6588

IMG_6589

IMG_6584

IMG_6594

MISS ROSE
Today’s woody lives a long way from the Waitemata, but her owner Andrew Christie from Queensland, Australia is a man of immaculate taste in woodys. Recently Andrew, owner of the 32’ woody – St.Helena, WW link below, recently contacted me and told me he had, had a rush of blood to the head and had swooped up the stunning woody Miss Rose.
Built approx. 10 years ago to a c.1930’s Zimmer design, Zimmer was a good friend (shared a desk) of the Hacker  boatbuilding dynasty in the USA. She was built in Australia by a very cool, OTT woody – looks like its brand new.
Andrew commented that the design specs were done  to run on 1930’s horse power not the modern V8 sitting in her today, that is good for 100kph…………….
Andrew has a great eye for detail and already is tweaking a few things to please the eye.
Now I just need to convince him to pop Miss Rose in a sea container and ship her over to NZ for the two (North & South Island) Lake Rotoiti Wooden Boat Festivals…………. 🙂
Screen Shot 2019-08-25 at 8.58.58 PM

Fiddlers Green

Screen Shot 2019-08-24 at 2.02.13 PM

Screen Shot 2019-08-24 at 2.01.41 PM

Screen Shot 2019-08-24 at 2.03.57 PM

Screen Shot 2019-08-24 at 2.04.08 PM

FIDDLERS GREEN

It is believed that Fiddlers Green was built c.1930/40’s and probably started life as a motor launch used for fishing and accessing the holiday homes in the Abel Tasman area. In 1976 she was rescued and converted to a sailing ketch and given the name Fiddlers Green

She measures 14’ in length, has a 5’8” beam and draws 2’6”. Her hull is kauri and the deck, cabin-top and framing timbers were replaced in 1990. She is a regular attendee at the Antique Classic Boat Show at Lake Rotoiti (Nelson Lakes) and in 2018 won the award for best sail boat.

She is for sale on trademe and comes with a custom built (2012) galvanised trailer.

Looking For A Clinker Dinghy?

Chatting with boat builder Greg Lee he told Dale, the yard foreman is currently building a clinker dinghy to a Roy Pariss pattern. So far, Dale has glued all the lands  and just put in the surfboard clear epoxy risen because it is UV stable (photos below)Another coat or two and he will start on the ribs. When finished the intention is to sell her. Knowing Dale and his work she will be a stunner.

IMG_2171

BOAT PORN

Adrian Pawson is mid-way thru a re-fit on his Frostbite – Kiteroa, 1st coat of gloss went on yesterday – looking very smart 🙂

Kiteroa 1

 

Arline

Screen Shot 2019-08-22 at 4.21.00 PM

Screen Shot 2019-08-22 at 4.20.16 PM

Screen Shot 2019-08-22 at 4.20.26 PM

ARLINE
The trade listing (thanks Ian McDonald) for Arline is a little loose eg under design it states ‘Classic’, and no mention of builder. We do know she was built in 1950, is kauri planked, 40’ in length, with a 12’ beam. The engine is a 1950 120hp Leyland, so suspect its been there from new.
Obviously an ex work boat, she appears to have good bones and if the price was right would be make a great base for conversion to pleasure use. But before that happened the asking price ($50k) would need to head south a bit.
The b/w photos below show Arline in Opua, Northland in her original configuration – they come to use ex Ross Griffen, via the BOI Historic Photos fb.
Gisborne is her home port, any woodys able to tell us more about Arline in the years between the old photos and as we see her today?
Screen Shot 2019-08-22 at 4.43.11 PM
Screen Shot 2019-08-22 at 4.44.08 PM
Screen Shot 2019-08-22 at 4.44.16 PM
24-08-2019 Input ex Greg Phlpott – The b/w photo below of Arline is dated 1971 and the location is Whangaroa. The newspaper clipping talks about Arline being for sale as a charter boat in the Bay of Islands.
Arline 04 - Whangaroa - Riethmaier - 1971
News

Barbarella – A Riva Reborn

IMG_2083

IMG_2093

P1060361

Screen Shot 2019-08-17 at 1.28.43 PM

BARBARELLA – A Riva Reborn 
 
As promised Iast week, I visited Marco Scuderi’s Helensville boat yard – MCN Shipwrights with the sole purpose of catching up with the re-build / restoration of Barbarella, the 1969 Riva Superaquarama .
Barbarella is a visitor from Australia, and has been in the country for 7 years for a total re-build. She started life (built) in Sarnic, then was delivered to her 1st owner in Monaco, from there she was sold to an American and moved to Lake Tahoe. Then sold to a Norwegian and kept at his summer house on a fjord in Norway. Then in 2005 her current Australian owner bought her and kept her in Hong Kong till 2011, when thankfully a very rundown Barbarella was rescued and shipped to NZ for Marco to restore.
 
The journey to return this beautiful speed boat to better than as launched condition has been long and challenging – these Riva’s are handmade thoroughbreds and obtaining parts is near impossible + she has a history of repairs that were not always true to her heritage.
 
As she sits today in the MCN Shipwrights shed, all that is required to complete the restoration is mainly reassembling the interior and commissioning the engines – twin 454 cubic inch, 350 hp Chev V8’s. 
 
I jumped at the opportunity to photograph her hull, but the situation – light, location (plastic ceiling etc) made for less than perfect photography conditions, but you will see from the photo gallery above that Marco and this team have done an amazing job. You could shave in the reflection of the 20+ coats of varnish. You can view more on the restoration journey at this link https://www.mcnshipwrights.com/barbarella—hull.html   make sure you check out the other links to see the total work.
 
Also in the shed are two very lucky K-class yachts, Sapphire and Jenanne, photo below. Sapphire is getting new oak ribs and Jeananne an interior and deck refresh. The two yachts are owned by the Mence Brothers. Check out the work to Peter’s Jenanne in more detail at the link below.
P1060365
21-01-2020 Update – The Riva Is Finished

I can report that the Riva project is finished and is days away from being shipped across the Tasman to her owner.
To say Marco was happy, would be a very big understatement 🙂 The question now is – what will replace her in the MCN Shipwrights shed?
For more details and photos on the project see link below.
Screen Shot 2020-01-21 at 7.47.33 PM
Screen Shot 2020-01-21 at 7.47.45 PM
Screen Shot 2020-01-21 at 7.46.29 PM