Siesta – Part 1

SIESTA - WAITANGI WEEKEND 2017

SIESTA - 1

SIESTA

Siesta was launched in 1949, built by the owner A.H.L. (Harry) Maddaford (a saw miller) with the help of a professional boat builder & his staff (see below for detail), at his Penrose factory. She measured 40’.

Below is an account from Maddaford’s daughter Valerie Holbrook, on the building & launch of Siesta.

“Dad had always wanted a good-sized new launch so he had Kitson (one of his staff at his sawmill) pull two kauris out of Ness Valley bush, one green one and one old and dry with the sap rotted off but the solid heart left and the other one was forty-five feet long, there was at least fifteen feet hanging out behind the GMC trailer.  The idea being the planks, at least up to the waterline would be in one length.  The logs were milled and stacked out to air dry for 12 to eighteen months with dad hosing the timber most nights to wash the sap out.

Charlie Hardman laid the boat out as he had been a boat builder and Reg, my brother-in-law who worked for him assisted   Charlie soon went back to his house building but Reg stayed on to work for Jack Taylor, a boat builder. We all assisted at times including Rex.

Dad put the engine in and other mechanical bits and pieces.   A friend of Bill Blacklock did some French polishing, and a builder friend of dad’s made the helmsman’s seat, with a liquor cabinet in the back.

It was eventually finished and loaded on a low solid-tyred trailer that dad had borrowed.   At five o’clock one morning I slowly towed it to Panmure wharf with the GMC, and dad followed close in his car to see that nothing moved. We put it beside the wharf to float off as the tide came in.

That was the forty-foot Siesta, launched close to Christmas 1949″.

Input from Ken Ricketts below (edited by Alan H)

By 1960 she belonged to Ewen Marmont. Ken was aboard over the Christmas 1960 period; she had painted coamings & had acquired a dodger by then & Ken recalls she had the Perkins diesel at that time. Marmont had her for a number of years.

Subsequent history is hard to unravel because of the existence of two/three boats with the same name, but it’s possible that her owner in 1973 was H.V. Woodcock of Murray’s Bay, Auckland.

The present owners have been in contact with a Brian Sinclair of Whangarei, who advised that he owned her for a number of years in the c.1970s & he most likely bought her off the Woodcocks.

Stephen Smith a boat broker of Whangarei & Grant Cardno owned her for several years from c.1991 > 1994, they bought from Eric Burger, a friend of Kens. It is believed the Burger only owned her for a short period, during which he upgraded the interior.

Smith & Cardo kept her at Gulf Harbour. They sold her c.1994/95 to Barry Galbraith in Kerikeri & he kept her at Dove Bay, B.O.I. for the next 20 years.

Galbraith told Ken that when he was away cruising on one occasion, a gentleman in another boat came up alongside, & told him he used to own Siesta & his name was Brian Sinclair, (as referred to above,) & he told Galbraith that she had had a trip to Fiji, to act as mark boat, for the Auckland to Fiji race, on one occasion (this is not corroborated at his stage, so can only be anecdotal)

She is presently moored at Kissing Point in Whangarei, owned by Laurie & Jill White. She was still moored at Doves Bay B.O.I. when they bought her approx. 2 ½ years ago.

Ken understands that she is in quite good condition & still looking very original. Her original engine was a 6 cyl. Hercules petrol WWII war surplus tank engine & fairly shortly after, this was replaced with a slanting 6-354 Perkins diesel, (so it would go under the floor), which she still has today.

(photos ex Valerie Holbrook, Dean Wright, Laurie & Jill White & Brian Galbraith)

 

 

San- Al- Pa 45′ Gladden Displacement Sedan Launch

Screen Shot 2017-07-09 at 9.00.52 PM

Screen Shot 2017-07-09 at 9.05.38 PM

Screen Shot 2017-07-09 at 9.05.06 PM

45′ Gladden Displacement Sedan Launch

I have had several woodys alert me to the trademe listing for the above vessel – to date we know that she was designed and built in 1968 to survey by John Gladden. 45′ in length, with a beam of 13’1″ & draft of 5’6″, she is kauri strip plank construction and powered with a 110 h.p. Gardner 6LXA diesel.

Looking at the photos she would a great launch for long distance all weather, economical cruising.
Anyone know more about her ? a name would be good, but we know how insecure the brokers are 🙂
And Something For The Woody Petrol Heads
The Red Wing engine below is on trademe – Built by the Thorobred Motor Company, USA. Thanks Peter Thorpy for the listing heads-up.
Screen Shot 2017-08-14 at 7.36.55 am
And Speaking Of Motors – Gardner Wanted
Woody Russell Ward, has asked if I could spread the word around that he needs a Gardner 5LW that is in reasonable running order.
Russel has a new project & it does not involve steam or sails, more on this later.
The engine  that came with the boat is beyond saving so he is looking for a replacement.
I suggested that a sensible person would treat the boat to a six cylinder Ford but Russell likes old engines especially the way they sound 😉

Tasman Star – A Peek Down Below

Screen Shot 2017-08-11 at 4.53.47 pm

Screen Shot 2017-08-11 at 4.54.06 pm

Tasman Star – A Peek Down Below

Built in 1935 by Dick Lang, she started life as a commercial fishing boat – Danish seine netting. She measures 42’6” & is powered by a 150hp LXW Gardner. Thanks to Ian McDonald for the trademe listing heads up.

You can read about her colour-full life on this WW link    https://waitematawoodys.com/2014/11/19/tasman-star/

Update photo from Greg Fenwick – Easter 2018 @ Whangaparapara

Unknown

 

Matareka II

Unknown-8

Unknown-7

MATAREKA II

Recently I was contacted by Chris Laird on behalf of Mavis and Louis Fenelon who own the Logan launch Matareka II (46 years) The Fenelon’s rescued and rebuilt the cabin and interior some years ago.

Due to advancing years & the requirement for some structural repairs beyond their capabilities, they have reluctantly decided to find a good home for Matareka.

Matareka is an iconic classic vessel, I have looked over her personally while hauled out in 2014 & I can vouch for her build quality & presentation. She is an absolutely superb launch, built with safety in mind. A Logan, so say no more.

The Fenelon’s are passionate woody owners & do not want to see Matareka II lost.

Any buyer needs to demonstrate that they have the resources / ability to undertake the work and return Matareka II to the lovely vessel that the Fenelons created.

They are very negotiable on price and want the boat to go to a good home. Anyone interested can contact Chris in the first instance (email address below) & he will put them in touch with Mavis and Louis.  chrislaird@xtra.co.nz

NOTE: there is an estimate of $20K for the commercial repair of the hull issues, given the overall condition of the vessel & her provenance, this is not an excess figure. Someone with the skills could reduce this figure substantially

Further reading:

During 2014 we began a major refurbishment of Matareka, which cost $25,000.  She had a complete and thorough repainting – antifouling, and all surfaces above the water-line. Complete interior painting and varnishing. Re-sealing of windows etc. where required. New water piping (input and distribution pipes) for the two 55 gal stainless steel water tanks. Servicing of water taps. Replacement of old winch with fully automatic anchor winch. New  Supreme anchor. Replacement of anchor rope with 60 metres of 3/8ths anchor chain. New teak bowsprit and bow roller. Cleaning and re-painting of underside of engine gear box. Four x 6 volt new engine batteries (arranged in two banks).

After all this work, on her third run in January 2015, we had the incident at the Ngapipi Road Bridge and she was repaired under Insurance during 2015.  We also decided, at our expense, to completely repaint the hull again – both white and anti-fouling.

Her inventory also includes the following:

• A 371 Detroit diesel 90HP engine complete with a hydraulic 3:1 Allison forward/reverse gear box  (replacement cost $25,000-00, though Detroit agent has said our engine will go forever).

• Large (original) bronze rudder.

• 1 ¾ inch dia. bronze prop shaft driving a 26 inch X 32 inch bronze propeller

• Hydraulically operated steering from a (unique) five spoke ship’s steering wheel

• Auxiliary emergency steel hand tiller

• Heavy duty towing bollard (so far used only for towing dinghy)

• 12 volt high capacity bilge pump

• 2 x 75 gal black steel diesel tanks

• All main cabin glazing is ¼ inch toughened glass

• Canvas double-zipped cock-pit cover

• Head with s.s. basin and chemical toilet

• 6 bunk x Dunlop sponge rubber Dralon-covered squabs in very good condition.

 

 

I Want the Compass ;-)

Screen Shot 2017-08-07 at 5.27.53 pm

I Want the Compass

The rest of you can fight over the what’s left. We could all chip in & buy her 😉 I can see the shower on My Girl?,  Lucinda needs a home-home-theater set up, the sink would look good in Trinidad’s cockpit, the alloy floors for Waimiga’s cockpit?.

Now those outboards?, might be the only way I can get more speed out of Raindance 🙂

I suppose at a $18k buy-now, it could be a cheap floating man pad but…………………………. really how do people come up with a value for their pride & joy?. Some recent trademe examples are so far off the mark, its embarrassing & just paints the wrong picture for the wooden boating scene.

 

 

 

 

Slainte

Snapchat-1668096968

SLAINTE – 1947 Chris Craft Restoration

I mentioned last Monday that while chatting to Alan Craig about the new restoration project for his yard – Craig Marine at Lake Rotoiti he just casually mentioned t “Speaking of projects, should probably show you the Chris Craft we just finished” – & then sends me a selection of photos of a simply stunning classic woody.

Slainte is a a 1947 27′ super delux enclosed Chris Craft. It was imported into NZ by the owner as a project that was walked away from in the states. The outside was 90% done but the inside was a shell. No motor, shaft or strut etc. A 5.7L v8 Crusader was imported too and Alan lifted the cockpit sole to suit.
Pretty much every single piece has been pulled apart fixed/painted/varnished and put back again. Some ‘ before’ photos below.
The idea has been to keep it looking original but turn key functionality!

WoW, what an additional to the Lake Rotoiti classic wooden boat fleet, can not wait to see her in person at next years Classic & Wooden Boat Parade weekend.

Tamahere – A Peek Down Below

Screen Shot 2017-07-31 at 9.45.24 PM

Screen Shot 2017-07-31 at 10.02.56 PM

TAMAHERE – A Peek Down Below

Tamahere last appeared on WW back in 2014 (link below), now thanks to a trademe listing we get to see down below.
She is 40′ long & powered by a 85hp Isuzu diesel that pushes her along at 6>8 knots. Its claimed she was built in 1903.

Back in 2014 we were unable to uncover any details on her, there lots of thousands of more WW readers these days, so hopefully we can unearth more on her.
Thanks to Ian McDonald for the listing heads up.

See / read more here    https://waitematawoodys.com/2014/03/17/tamahere/

18-04-2018 ‘New’ Photos below ex trademe

 

Lake Rotoiti Barn Find Restoration

20170723_130731_resized

20170723_132404_resized

20170726_100204_resized

Lake Rotoiti Barn Find Restoration

Alan Craig the Lake Rotoiti boat builder (Craig Marine) dropped me a note the other day to say that he was restoring the about boat. She would have to win the WW barn find prize 🙂 Her story goes like this – has be in a shed on a farm in Rotoma for the last ten odd years. Built in 1928, 24′ in length, appears to be to a USA Hacker Craft design or most likely copied, she is in fact not to dissimilar to Malolo.
It has been owned by Peter Davies and was his Fathers boat from near new. Details Alan has been told about her history: Built in Picton by Vic & Clarrie Olson? (Scandinavian or Swiss?). Built for a Mr Stocker then brought by Mr Davies in 1930, it was sold a while later and brought back again by Mr Davies once the wool price lifted and in 1950 an old, but still new, 1938 Osco marine flathead V8 went in it and is still there now. Alan thinks it was sold once again then found by Peter and brought back to Rotoma.

There is a Hacker Craft step pad fitted to her (the only reference to Hacker Craft) but this could easily have been a later addition. The plans are to rebuild the engine and try get a bit more than the supposed 90hp out of it. Apparently they didn’t get much speed out of it but looks like pretty small prop set up.

This will be a great project to follow – Alan is keen confirm / learn more about her past so if any woodys can help, please comment.

Now Alan’s not a man to run things up the flag pole, chatting on-line he says ” speaking of projects, should probably show you the Chris Craft we just finished” – totally blew we away – amazing project. I’ll run a story on her soon.

Update ex Alan Craig – Alan found the below under the fore-deck – D Jennings?

Unknown-3

WAIATA II – Sailing Sunday II

Screen Shot 2017-07-29 at 5.58.10 PM

Screen Shot 2017-07-29 at 6.01.07 PM

Screen Shot 2017-07-29 at 6.02.16 PM

WAIATA II – Sailing Sunday
Waiata II was Snow Waters personal yacht, designed by Alan Mummery, and launched in 1971 /2 – Alan Sexton gave me the heads up on the trademe listing & Alan commented that remembers seeing her around Waiheke Island on their first summer on Tarata.

She was featured in Sea Spray August 1971 whilst under construction. The feature noted that Snow was looking for waterline length, in the Innismarra (or even further back William Garden’s Oceanus) style, ie long (55′) and narrow.

She is single skin strip planked kauri glued with steam bent ribs. No doubt with the 6 cyl. Ford she motors at a good pace too.

Waiata II has been owned by current owner for 41 years in NZ, with the last 3 years being based in the Australian East Coast, where she is 4sale. The current location making her perfect for someone wanting to cruise the Queensland Coast, Whitsundays or further north.

05-01-2025 – INPUT ex RICHARD LOCK  – It was brought to my attention that the grandson of the long term owner of Waiata II was trying to locate her.This image might assist. New years day 2026.

Yesterdays Quiz Winner – WW T-Shirt

Mr M Deeble – proof that the early bird does catch the worm, with his 6.00ish entry 🙂

PRESTO – Is She Or Isn’t She?

Screen Shot 2017-07-26 at 5.24.12 pm

PRESTO – Is She Or Isn’t She?

If you believe the trademe listing, this is a very old lady – it says Presto was born 1898. Built by Charles Bailey, 42’ in length, 3 skin kauri. Originally powered by a steam engine but now powered by a 1950 100hp, 471 Detroit diesel.

Our resident Bailey guru HDK should be able to confirm or destroy this woodys birth details. Builder aside – what more do we know about her?. Current home is Taurangi. Thanks to Ian McDonald for the listing heads-up 🙂

28-07-2017 Comments ex Russell Ward
Port Doctor’s Boat. General workboat around the place when I was a kid at school. Had a boxy wheelbase with control position atop. Always scuttling round Hobson Wharf. Eventually retired.
She lay at Barry Brickell’s Diving Creek property in Coromandel for many years and was sold to a man who did the honours and but put the rakish upper works on her. Painted her green which is what I always remembered her as. Her old wheelhouse may still be at Driving Creek.

presto

Comments below ex Ray Morey
1st an aft view of PRESTO under steam, that cut from the pic of Lady Vie and pan-am flying boat at mechanics bay
2nd is part of the blue boats dated 1973 from left is RANGI-SPRAY-unknown and just showing on the right is PRESTO after rebuild. This when Subritzky owned her.

Photo below from Dave Stanaway from when he knew her in the 1960’s when Bryce Subritzky was her master.

IMG_0693

Input from Harold Kidd – below is a clipping from the Auckland Star, 30 March 1898 – covering the launching.

Screen Shot 2017-07-28 at 9.30.36 PM

 

Read lots more on the Comments Section