CLASSIC WOODEN LAUNCH MARISTELLA – A Peek Down Below
At the recent Classic Woodys Boat Show at the OBC Marina one of the stand out craft was the 40’ classic wooden launch MARISTELLA, built in 1936 by Sam Ford. The WW camera got to have a gander down below and today we get a peek at the rolling restoration that is underway.
We have commented many times on WW about lucky boats and lucky owners – well MARISTELLA is a double winner. She has in past lives – sunk, caught fire and been on the rocks, and not all at the same time. A succession of good people have put their hand up to bail the vessel out and what we see today is a reflection of everyones vision and commitment.
In particular her current owner gets the big ups from WW having undertaken significant work to the cabin to get her closer to what Sam Ford sent down the slipway in 1936.
A SNAPSHOT OF THE CLASSIC WOODEN LAUNCH – MARISTELLA
As a result of the photo (see below) of the classic 40’ wooden launch – MARISTELLA, built in 1936 by Sam Ford, appearing at the recent Classic Woodys Boat Show at OBC – WW was contacted by Katherine Armstrong. Katherine’s parents Roy and Daphine Bridge were previous owners of MARISTELLA.
Katherine commented that she had a collection of photos taken during their ownership. Of course I asked for copies, which today we all get to share.
In the 4th photo above the other launch is AWANUI, which at the time was owned by Bob Goldie. Can we learn more about AWANUI.
In the last photo above we see Roy and Daphine on the ‘flying bridge’ of MARISTELLA.
One photo is tagged APR 64, so we can safely assume the photos are c.1960’s
All Alone & Very Cold – (overnighting due to mast height)
CLASSIC WOODYS BOAT SHOW AT OBC
On Sunday we held the inaugural classic woodys boat show – hosted by the OBC Marina.
WW was holding hands with Auckland’s – Outdoor Boating Club on Tamaki Drive as they celebrated their annual open day. Magic location and set up – check out the club here https://www.obc.co.nz
As it seems to always happen at woodys events, the weather was 10/10, a perfect winners day. Check out the photo gallery above.
The day had all the ingredients for a fun family day out – Nice boats + Nice people, topped off with classic trailer boats, classic cars, food/coffee trucks, kids activities and a bonus – the team from LEGASEA , the kiwi hero’s that are dedicated to restoring the abundance, biodiversity and health of NZ’s marine environment – check out the website https://legasea.co.nz
Enjoy the photos, it was a great day and everyone left with a smile on their face.
LOOKING FOR INFORMATION ON THE CLASSIC WOODEN LAUNCH – TAUMANGI WW was contacted during the week by Peter Langley in regard to the classic wooden launch – TAUMANGI, once owned by his father.
Some history -TAUMANGI is a 36’ carvel planked bridge-decker. Originally in Auckland in the 1950- 1960’s then went to Tauranga and re-decked / modernised by boat builder Bill Visser. Peter’s father owned her from around 1960-1972 then the boat came back to Auckland and was moored up the Panmure basin for years.
Peter saw her for sale around 2013 through Busfield marine but he has not seen her since. Peter commented that she had a lot of varnish woodwork originally when his dad owned her but when last seen the cabins tops were painted light blue .
Can anyone help with what became of TAUMANGI, Peter’s thoughts were she is probably moored up a river somewhere. REMEMBER – GREAT FAMILY DAY OUT TOMORROW AT THE OBC OPEN DAY
THE RESTORATION OF THE CLASSIC WOODEN EX WORKBOAT – ARIANA (TE KAWAU) – PART TWO
Following on from last Mondays story on Sven Wiig’s classic wooden vessel – ARIANA, previously named GLENROWAN and TE KAWAU. Sven has just sent in Part Two.
Todays story takes us up to last week and we will run Part Three on Wednesday and then woodys we will have to wait for the final part for a little while, but rest assured there will be one 😉
And as highlighted in Part One Sven is looking for any intel on her past , and is very grateful for those that commented last week.
“Once the decks were fibreglassed the next mission was to get the coamings and cabin tops rebuilt. Cabin tops were given two layers of ply and clashed in solid.
The little doghouse extension got the same treatment.
I had hoped to find bronze portholes for the coamings but couldn’t find any in the right sizes and quantity. I decided to copy the detailing that existed in the wheelhouse windows.
Next were the doors which I repaired and modified.
The wheelhouse sides were repaired with new tongue and groove.
Once all this had been sanded and given a couple of coats of paint the cover could be removed and I could finally stand back and check out my work. I was a bit nervous that I wouldn’t like my design choices once I could view them from a distance, but overall I was pretty happy with her.
Cover off after three years.
It had been more than three years now since she had come out of the water. Progress was frustratingly slow but with the cover now off it finally felt like I was getting there. Next up was to rebuild the Bulwarks. These had been cut away to gain access to the deck. I started cleaning off the old plywood getting ready to rebuild them. When I got around to the stern post I made a horrific discovery. I had always thought her stern wasn’t quite right I now discovered why. I dug out a large chunk of sikaflex and could see that her stem was cracked almost in two. All the screws holding her planks went straight into the crack. It appears that at some time in her past she suffered a trauma. Maybe she was crushed between another boat and a wharf, or hit from behind? Crikey what to do? All the others in the yard came and checked it out. There was lots of tut tuts and sucking through the teeth. A local boatbuilder suggested I cut the whole back off and put a transom on her. Humm… maybe not. It was not going to be an easy fix hence why it had never been fixed properly. Over the years more and more cotton had been jammed it there, more screws added then the sikaflex. This was why all the seams back there were large and the planks uneven, There was nothing for it in my mind I had to pull it all apart and repair it properly. I spent a good day just looking and trying to work out if I was biting off more than I could chew. Was there an easier way. Nope just had to go for it.
Dug out the putty and sikaflex to reveal the crack…
I cut off the outer stem which appeared to be a grown hardwood. Maybe pohutukawa? This revealed the full horror of the situation. Yep I was committed now.
I then carefully removed all the old screws from the planks, removed a knee on the inside and pulled the inner stem out. All that makes it sound easy. In reality it was several painful days where I questioned my life choices.
The inner stem removed from the boat. The crack when right though all the screws going into the cracked timber. To be continued in Part Three – on Wednesday.
Todays woody photo comes to us from the Far North District Library collection via Dean Wright. The photographer being Gary Strongman (Northern Advocate).
The location is Kerikeri and is dated March 1981 and is tagged ‘post Kerikeri Flood’.
In the photo we see ‘modernist’ launch coming to the aid of what appears to be a partially submerged boat. Both craft have reg numbers visible so probably workboats – the launch # could be ND 2524 and the submerged at a guess AK ?756 0r ?758.
Can we ID the boats.
INPUT EX GARY MATHESON– Hi, the vessels in the photo of the Keri Keri flood are the Chante and the Zita. Both were commercial fishing at the time. The Zita was a 28ft mullety and the Chante was owned by the Strongmans.
LOOKING FOR SOMETHING TO DO NEXT SUNDAY (20-07-2025)
Come along to the OPEN DAY at OBC marina – details below.
Things to see, do, eat and drink:
Classic Boats – On berths and trailers, including visiting vessels from Waitemata Woodys.
During the week I was visiting the OBC marine centre on Auckland’s Tamaki Drive scoping out an upcoming woody event and spotted the launch – MAJEIKA on a mooring in Whakatakata Bay. A quick WW search popped up that she appeared on WW back in May 2022, link below https://waitematawoodys.com/2022/05/07/majeika/
As sometimes happens way to often at the same time Ian McDonald pointed out that she was also on tme.
So a quick summary of what we know – MAJEIKA is a 28’ Shipbuilders design, most likely a ‘kit’ boat, built c.1960, builder unknown. Triple skin kauri which will make for a very robust woody.
Forward motion is via a 100hp Nissan diesel engine. In the 2022 WW story the engine was said to be a LD28 rated at 88hp, and a top speed of 12 knots. Also the length was 26’ then – so it seems she has been eating a few pies.
With an asking price of $10k, we see another example of it being a buyers market at the moment.
WW was contacted yesterday by Lindsay McMorran (MV POPPET – Logan 33) in regard to a woody that has just appeared on his pier at the OBC (Outdoor Boating Club, Orakei) the boats name is KAIPAPA.
At first glance I might be a little to quick to use the term woody….. looks a relatively new hull shape and someone made good use of some plywood sheets on the cabin 🙂
Seems PACIFIC isn’t the only boat that used the ‘WARNING BOW THRUSTER decals that came in the packaging 😉
The launch – Jo Marli made an appearance on WW back in Feb 2019, thanks to some photos taken by Nathan Herbert, of Jo Marli moored at/in Mahurangi, during the 2019 regatta. Link here to that story.https://waitematawoodys.com/2019/02/05/jo-marli-robert-brooke-mnzm/ She was looking a little un-loved at the time. Harold Kidd told us at that time, that the launch first appears in his records back in 1962 owned by R.R. Miller of 346 Dominion Road and he continues as owner for many years after that. She’s been on the Mahurangi for 10 years or so (in 2019).
Fast forward to mid week and I was at OBC and spotted Jo Marli on a marina berth looking very smart, maybe a change of owner? Snapped a photo thru the glass of her interior – equally smart. Well done to her current custodians. Do we know anymore about her?
17-05-2025 UPDATE – Spotted hauled out at the Milford Cruising Club yard, mid May. Photo ex Jason Prew.
Earlier in the week I was watching Centaurus slide back into the water at Te Atatu Boating Club after her extensive refit and owner Angus Rogers mentioned he was on the hunt for a small winch for the dinghy davit. I dropped into The Slipway Milford* shed the next day and jackpot – hiding in a pile of sawdust were a few ‘old’ boat bits – thanks to the guys generosity I left with the winch below in my bag. A quick clean with WD40 and some steel wool and it was perfect. Mr Rogers was very happy. Beer can below for size comparison 🙂
*Now if any of you are wondering why I dropped into The Slipway Milford……….. I was driving down the northern motorway at 11.55am and the nostrils picked up a whiff of BBQ bacon, a quick exit at Northcote off ramp and bingo – Mr Prew was preparing his lunch – in the interests of healthy eating, I had to help out and lighten the load 🙂
WW has been contacted by the owner of the launch – Mahere, seen above. They are very light on information and history, so today we are asking for help in regard to design / builder / when built / past owners etc.
Mahere is powered by a 120hp Ford Trader diesel, see photo – very impressive exhaust ‘plumbing’.
Current home is Whakatakataka Bay, Auckland – otherwise known as the OBC basin 🙂
Yesterdays Quiz Winner – The lucky winner of a WW cap was Dave Stanaway – lots of entries in the draw but few got three tickets in the draw i.e. three correct answers – being Frangipani / Zane Grey / Off to Tahiti via Rarotonga
The skippers that had RSVP’ed have been contacted but FYI – the weekends Woody Cruise to Clevedon has been postponed – slightly evil forecast – new date tba
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 14+ million views 