Arethusa – New Wheelhouse Project

Screen Shot 2019-07-26 at 4.02.42 PM copy

arethusa2 copy

Arethusa – New Wheelhouse Project
 
Back in October as part of another story I mentioned that Arethusa was inline for a treat – her Bay of Islands owner, Dean Wright has decided to a build / install a new wheelhouse. Arethusa is almost 100 year old (99) so a perfect centennial present for the 33’ Bob Brown built ex gaff rigged cutter. Arethusa these days is configured in work-boat / launch style.
 
The new wheelhouse is being made from Iroko by John Gander – John is a shipwright extraordinaire, served his apprenticeship and worked for Careys for many years. 
Included above are the design drawings for the wheelhouse and an existing photo for comparison. 
We will be following this project on WW with much interest – love a good project.
 
To see / read more on Arethusa, including restoring & installing a Gardner 4LW – more links there  https://waitematawoodys.com/2017/12/31/restoring-installing-a-gardner-in-arethusa-revisited/

Highlander

DW-160115_D862355

DW-160115_D862358

20191008-_DHW7278

HIGHLANDER

I have been having ongoing chat with Bay of Islands woody and photographer Dean Wright, he is about to undertake a build / installation of a new wheelhouse for his almost 100 year old (99) 33’ Bob Brown built ex gaff rigged cutter – Arethusa, these days presented in work-boat / launch style.  The wheelhouse will be made from Iroko and the big question is yellow or red Uroxsys (Allwood) primer.
Dean sent me a sample of the timber and I have done a 1/2 and 1/2 varnishing job – the result? Not much between it, slight golden tinge to the yellow section. I think the natural colour of the Iroko is just so strong that the primer tint makes little difference.
I have attached at the bottom of the story a photo comparison of the existing wheel house and the plan for the new one – very smart.
Anyone back to todays story – Dean email me mid-week and said “check out what’s parked in our bay tonight” and sent the above photos of the 49’ Highlander. Designed by Roger Carey but not built by Careys. Wheelhouse designed by Don and Peter McManaway.
Dean mentioned Highlander was featured (page 127) in the 1988 book ‘By Boats We Live”, written by Joan Clark. The book records the history of the boats built by Roger Carey. I have reproduced the page below, have a read – its very good
Screen Shot 2019-10-11 at 10.46.30 AM
Arethusa – New Wheelhouse

Not Everyone Had A Good Holiday Boating Experience

Unknown-4

Unknown-5

Unknown-3

Not Everyone Had A Good Holiday Boating Experience

I’ll keep the names of the photographers that sent me the above photos anonymous 😉

• Moana, the 23’ Max Carter built clinker day boat must have been in a hurry to get back into Milford Marina & cut the corner, not the first to suffer the embarrassment of waiting for the tide in a very public spot & they won’t be the last. It appears very little damage was done, other than a bruised ego.

At the other end of the scale – a very large Azimut ‘kissed’ some rocks in the Bay of Islands at speed – the photos above of her hauled out only show a fraction of the damage – one prop was bent out of shape & the other almost non-existent. The gearboxes ‘exploded’ – a rather large insurance claim me thinks. And some marine engineer will be starting the new year with a big fat repair job.

And another oops below from early evening yesterday, the photo was snapped in the next bay along from Chamberlains Bay, Ponui Island. Low water was 2 hours away from this photo so it was only going to get uglier.  

Seems someone didn’t allow for the downside of the current high tides i.e. very low low tides.

As they say folks – be careful out there.

IMG_1552

Arethusa In The B.O.I.

I posted yesterday a selection of photos taken by Dean Wright. Just like me, Dean’s normally behind the camera & we do not see this woody – the Bob Brown built, 100-year-old, 33’ classic Arethusa. The photo below was taken by Grant Anson, skipper of Marie-J.

You can see / read more on this amazing classic’s life at this link    http://deanwright.co.nz/history.html

Unknown

Restoring & Installing a Gardner in Arethusa – Revisited

Restoring & Installing a Gardner in Arethusa

story & photos ex Dean Wright

It not often I get sent info on a boat & it jumps the queue & appears on ww the next day. If you have been following on ww the rolling restoration Dean has been doing on Arethusa over the last few years you would know two things, Arethusa is in very good hands & Deans a very talented commercial photographer. So the links below to Deans latest project – the restoration of a Gardner 4LW & subsequent installation in Arethusa are well worth check out.

Restoration     http://deanwright.co.nz/arethusa/log-arethusa/152-gardner-4lw-diesel-restoration.html

Installation      http://deanwright.co.nz/arethusa/log-arethusa/154-installing-the-gardner.html

Some history below

Arethusa ticked over 96 this year. She started life as a gaff rigged cutter, built by Bob Brown (designer of the Z class) at Sulphur Beach, Northcote. She’s carvel planked kauri, 33′ 4″ LOA with a 12′ Beam. With the aid of a fair bit of ballast she weighs 10 tonnes. She’s had an interesting life, more details here http://deanwright.co.nz/history.html