Sterling

image1

 

image2-1

STERLING
I have been contacted by Murray Wilson the owner of the 40′ ex workboat – Sterling, he bought her a couple of years ago and is in the middle of a ‘rolling’ restoration. Murray has been told that she was built by Ernie Lane in Picton in 1926 to tow logs out of the Sounds.
 

It’s rumoured that Sterling was involved in an incident in Tasman Bay in the 1960s or 1970s that involved the boat being found with a scallop dredge in the water, engine running and no one on board. When the dredge was lifted the skipper came up with it. 

 
Murray is keen to confirm and learn more of Sterling’s history.

Input from Harold Kidd – This STERLING was built by Ernie Lane in Picton in 1925 for L.J. Steele as a passenger vessel to carry 60 pax and had a 1924-built 3 cylinder 27hp (rated) Sterling marine engine bore 4.5″ x stroke 5.5″, dimensions 34′ x 9′ x 3’9″. The engine was changed to 27hp Ruston-Lister diesel by 1940 when she was owned by N.A. Steele and converted to a fishing boat under No. PN29. There was a Marine Dept enquiry in 1946 when she ran on rocks in the Tory Channel with the loss of two lives.

That 34ft loa was the MOT Thames measurement length. She was a 40 footer really.
Historical notes below from recollections of Lex Wells, recorded by Mike Davidson
Preface
Lex Wells has lived all his life in the Marlborough Sounds and has worked on and owned
many working boats in the fishing, scalloping and mussel industries. Lex is now over 80 and
has extensive memories and knowledge of many of the working boats and launches in the
Sounds. Arguably there is nobody better informed about Sounds vessels than he is.
History of the Motor Launch “STERLING”
1. The “Sterling” was built by Ernie Lane in the late 1920s for Matt Steel and joined his small fleet of passenger launches.
2. Matt Steel sold his fleet to Queen Charlotte Launches in the late1940s. Lex is not sure if
“Sterling” went to Queen Charlotte Launches as part of that deal; she might have been sold earlier.
3. In the 1960s or 1970s, “Sterling” was sold again and used for fishing and scalloping out of Nelson. One day, in the 1970s, the “Sterling” was found drifting, unmanned, on the scallop beds. The skipper had been working by himself. His body was found in the dredge when it was lifted.
4. After this accident, “Sterling” was sold to a new owner and went fishing out of Taieri
Mouth and was based there for many years.
5. “Sterling” was then bought by Ronnie Wells (a cousin of Lex’s) in the late 1970s or early 1980s and he brought her back to the Sounds. He used her for quite a few years in the scalloping and fishing industry, operating out of Havelock.
6. “Sterling” had a Gardner engine in it when Ronnie Wells bought it. At some stage
afterwards that engine was destroyed when an oil filter failed. It was replaced with a Russel Newbury (RN) engine. That engine was too old and had been poorly maintained and it eventually died one day when “Sterling” was working at sea. Lex towed her with his vessel into Havelock where a four cylinder Ford engine was put in “Sterling”.
7. Ronnie Wells then sold “Sterling” to Sunny Sunbeam and his business partner (might have been his brother). She was taken to Picton where a lot of work was done on her, including new top planks on the hull and a new and much larger cabin on the deck. She was taken back to Havelock soon after.
8. Sunny Sunbeam later sold her and she was taken away from the Sounds by her new owner.

Soul Survivor (Fairley)

Screen Shot 2019-03-23 at 6.19.38 PM

 

SOUL SURVIVOR (FAIRLEY)
Soul Survivor sold recently on trademe for $100 to someone from Thames. The listing stated she is 23’6”, double ended kauri carvel planked ex commercial fishing boat (named Fairley) and was built in 1927, by Miller & Tunnage (Port Chalmers, Sth Island) and She is pushed along by a ‘vintage’ Yanmar MX 8hp diesel.
She has spent the last 12 years on Lake Rotoiti, Rotorua, but the last 5 years on the hard. She made the journey from Dunedin by truck in 2006.
Anyone know who bought her and / or more on her past?

Corsair – Bridge Decker

Janet & Bruce Pullan, owners of the woody – Ann Michelle, came across an old bridge decker launch ‘resting’ in a paddock in the Waikato.
The boats name is Corsair, she is 34’ and the only information supplied by the owner was that she was built by a boatbuilder on the North Shore, started before WW2 and finished after the War. He believed the name was original.
I know its a big ask – but does anyone recall a launch that matches these specs?

Steam Tug Hipi

HIPImnb

hipimm

Steam Tug Hipi

Today’s story features the Chas Bailey built steam tug Hipi and comes to us from Mick Kelly via Harold Kidd. Mick was prompted to write by a recent article by HDK in Boating New Zealand.

Mick commented that Hipi ran aground just south of Whangamata in the mid 1970s.  He used to own the farm adjoining the beach where this occurred.  The previous owner of the farm was called in the middle of the night to rescue the crew.  For his efforts he was presented with the ship’s wheel, which he attached to the bar in his house.

The story as Mick remembers it was that she was towing a barge with a digger to pinch sand off the beaches in the area, and it all went a bit pear shaped.  A local bought the wreck, and bulldozed a track down onto the beach.  He cut off the metal superstructure and towed the hull up to where he could salvage the engine/s which Mick imagines had replaced the original steam engine.

Mick salvaged a few brass fittings, and some bits of Kauri decking which he incorporated into the first launch he built.  He also used the hardwood keel timber for a beam in the shed he built on the farm.

Update from John Bullivant – ‘newer’ photo below, she was built by Baileys in 1909 and was converted to twin Gardner 8L3s at some stage (apparently)

HIPI LATER

Input from Baden Pascoe – Hipi was built in 1909 for Nelson Bros who owned the Tomoana Freezing Works as a lighter tug. In these days Gisborne had no deep water port so the frozen sheep carcases were loaded into insulated lighters and towed out to the roadstead. Initially she had two Simpson Strickland triple expansion steam engines and later replaced with a set of compound engines. The photo above with a wheel house fitted was after a major refit at WG Lowe & Son in 1933. The steam engines were removed and two Petter Atomic T25/2m diesel engines of 50 hp each were fitted. She then returned to Gisborne to carry out the same duties. By this time Nelson Bros had bought into the Kaiti Freezing Works and formed Gisborne Lightering and Stevedoring Co Ltd and their tugs and lighters assets transferred over. During the WWII she came back to Auckland as she was loaned/sold to the NZ Navy to work the submarine nets protecting the Auckland Harbour and based at Islington Bay. After the war she was sold by tender to Parry Bros, a well-known local owner of scows and the tug Glyn Bird. They phased out their scow fleet and replaced them with tugs and barges. Their early tugs were, Glyn Bird, Lady Eva, Hipi, Sibyl (now owned by the Pollards). They removed the Petters and replace them with two Kelvin K4’s of 88 hp each. As the old wooden barges become too small or became too hard to maintain they replaced them with steel barges. Hipi’s barge was Onewaka with a capacity of about 500 ton. She was employed on the sand run to Parengarenga and sometimes carried superphosphate to Te Paki Station with a supply landing at Parengarenga Harbour. The Kelvins were replaced with twin 8L3 Gardners of 150 hp making her the fastest tug on that run and their flag ship. I first saw Hipi in about 1964 while she was delivering super from Tauranga. My father knew one of the crew and I can remember boarding her and stepping over the very high wheel house combing. While she was returning to Tauranga from unloading at Whitianga in March 1976 she went aground below the cliffs at Papakura Bay as mentioned by Mick. The boys had spent the afternoon in the pub, had too much to drink and after a few hours bunked down and put the youngest crew member on the wheel. He too eventually fell asleep and was woken when she drove her self between a rock ledge with the Onewaka trailing behind. At this stage she was not making any water and was basically uninjured. Before they could get her off the wind came up and she became a total loss. They went ashore phoned Buster (Norman) Parry to inform him of the grounding. The farmer looked after the crew until the next day when Buster and Keith Penney the operations manager arrived. I understand her skipper George Little was already in Buster & Keith’s bad book and he was sacked on the spot. Ask any of the old school tug masters and crew and they will tell you about Hipi. She was the superstar wooden tug. Mick, have you a photo of her wheel?

The painting below artist is unknow and was gifted to Baden Pascoe by Keith Penney

Hipi Painting

Hipi on slip 72

24-03-2019 Update  –  via Mick Kelly – The wheel from Hipi resides  in Featherston, Wairarapa, with Teena Pettitt, the daughter of the farm owner (Dave Pettitt) at the time of the incident mentioned above. Photos below.

Mick also sent in the photo of a door in his house that features recycled skin fitting and nails from the wreck of Hipi.
20190323_095124
20190323_095157
IMG_0283

A Woody Tour Of Helensville / Upper Kaipara

OLYMPUS DIGITAL CAMERA

Florance M

A Woody Tour Of Helensville / Upper Kaipara  

Following on from last Mondays stunning story on the boats resting in the Tamaki River (link below if you missed it), woody John Bullivant has been out & about again – this time his focus has been the Helensville & Kaipara Cruising Club. I have ID / tagged the photos where known, just scroll over to view the name). Again I’ll let John tell the story 🙂

“I did another boat hunting tour to Helensville on 6 Feb and found a few more wooden working boats and others parked on the mud at the fishing wharf and Kaipara Cruising Club . They are a friendly bunch at the club and allowed me to go onto the private jetties to take some photos, even unlocking a gate for me which was much appreciated. The couple I spoke to have a converted ex fishing boat (Waimiko I think ) with a 185HP Nissan and all the gear, which they say makes a perfect solid pleasure boat. 

The big Miller & Tunnage canoe stern La Vega ? also is Nissan powered but U/S at the moment and may be for sale ( hull looks in good nick and built like the proverbial BSH) and would make a great pleasure convert and sea boat. There are a number of interesting boats there including the nice looking bridge decker further up. Couldn’t get a good pic but looks like she’s having some work done? Also found Florence M (now with M painted over) on the hard there, back to the side she started on ? 

One thing that was of particular nostalgic interest (sort of ) was the little plastic ‘Scuppers tug’ (think that’s what the called them) tucked in the corner. If I’m not mistaken, this little boat resided at Half Moon Bay Marina way back in the early 80s when new, and I have an idea it was their little marina work boat, (I’m pretty sure it’s not from the other Half Moon Bay but would be a weird coincidence if it was). I even contemplated buying one when they came out (under $12,000 from memory) Stange place to find it.

The interesting little boat on the drums and the old planked Mullet boat? are on the Northern end of Helensville over the rail lines. All in all a great day out and finished of with great local fish and chips (found out the shop owner lived not far from me at Whangaparaoa before moving to Helensville,)  NZ is small,- once stayed overnight in the Hunterville motel, and the people who had recently bought it had lived not far from me in Bucklands beach, we Kiwis certainly move around along with our boats.”

SS Alice

Screen Shot 2019-02-27 at 8.56.50 AM

Steamboat Alice

If we believe her trade listing (thanks Ian McDonald) the 26’ steamboat Alice was built in 1879.  Between 1991 and 2000 she underwent a total rebuild in Taupo, where she still resides.

In private use now, she once was in survey, doing tours of Lake Taupo.

Her current zoom zoom is via ‘hybrid’ set-up i.e. a combination of steam (25hp) and electric. The boiler is wood fired and I can just imagine the wonderful smell of ti tree burning as you cruised the lake – in my eyes a low cost floating bach at the lake 🙂

 

 

 

 

Doris

Doris Boat Refit 2014 Oct Nov 050

DORIS
Baden Pascoe sent in the above photo of the Collings & Bell designed / built launch – Doris. Once owned by Jack Allan (Allen?).
Baden commented that she was one of several motor boats was taken over by the RNZAF and used at Lauthala Bay, Fiji during WW2.
Can any of the woodys tell us more about Dorris?
TAMAKI BOATS UPDATE:
Yesterdays story on the boats ‘resting’ up the Tamaki River blew me away in terms of viewing numbers e.g. 25% more than the coverage of the Mahurangi Regatta and almost neck-‘n-neck with the recent Hobart Wooden Boat Festival. Again many thanks John Bullivant 🙂

A Woody Tour of the Tamaki River – 70 photos

A Woody Tour of the Tamaki River – 70 photos

Todays story so needed to be done, and woodys, John Bullivant is a legend for grabbing his camera and heading out on our behalf. I’ll let John tell his story 🙂

“Thought it was about time I got a few photos on the Tamaki River boats before they disappear, (and they are going fast by the look of some). There are only a fraction of the numbers of wooden boats that were moored there in the 1960s and 1970s and as I previously mentioned, living on the waterfront at Bucklands Beach for around 25yrs I had seen most of them go by (was like Queen St on Friday nights most summer weekends) I did 2 trips down from Orewa and took pics from Panmure Boat Club and up to and under the new Panmure Bridge, end of Gabadore Pl (off Carbine Rd), the old Panmure Marina, (going with many houses from Panmure to Pakuranga Town centre, to make way for new highway widening), along the Tamaki River walkway for about 4km (Rotary Walk,- starts at the old Panmure Marina and goes all the way to Gills Rd in Howick, for those who like walking), Half Moon Bay and Bucklands Beach.

I also went down to the 1960s site of the private ex RNZAF W1  haul-out ramp below the old Alright property (well covered in bush now and a near vertical climb down a 30ft bank), – lost a bit of blood but well worth it for me, as I last stood on that spot 50yrs ago when we sneaked on board W1 to have a look around while she was up there. Original ramp and haul-out dolly is still there (see pics) although time has taken its toll. I’m amazed, looking at the crude set-up today, how Mr Alright got a 64ft boat weighing many tons, sitting on rubber tyred dollies (which ran in grooved concrete) lined up and hauled out with a winch and by the looks of it, the large tree in line with the ramp, not to mention getting it back out again (I’m assuming he must have winched it back out somehow). Massive effort not only to build the ramp on mud, (all by hand, no concrete pumping trucks) but to be able to use it.

Hope these photos are of interest to people who may be able to identify some of the mystery boats (especially the light blue launch with the chrome ventilators and light, (looks ex RNZAF ?). The yacht hidden near the big boatshed is around 45ft looks very old and has been there for many years, as has poor old Imatra, a once grand yacht which is in a very sad state and in urgent need of care (must have been there 30 yrs odd now). I have included a few other launches and yachts to show the sad state of many good looking (and once expensive) boats on the river crying out for attention, but I guess many people have other priorities and sadly their dreams are just floating slowly into oblivion. It’s pretty hard to get rid of a rusty rotten hulk, so there they will stay till it’s “business time” (flight of the Conchords) for the 20 ton digger.

I may have some of the boats names wrong as I was using a telephoto lens for most of the pics and with enhancing colour, contrast etc was as near as I could get. I’m sure someone will correct any if wrong.”

NOTE: With the photos that John has named, I have tagged the photos with those names. Scroll over the photos to view the names 😉
I could have used the individual images on WW over an extended period, but they need to be together in one spot. Enjoy 🙂

Lily + Woody Events

Lily a

Lily

LILY + WOODY EVENTS

Todays vessel is the ex work boat Lily, seen in the above Nelson photos, ex John Burland, on-route to getting some TLC and post the TCL awaiting the tide.
Can anyone tell us more about Lily?
NZ ANTIQUE & CLASSIC BOAT SHOW – MARCH 2>3
IMG_0578
This year the Lake Rotoiti – Nelson Lakes event celebrates its 20th Anniversary and organisers are predicting a record turnout. Everything going right I’ll be there with the camera so if you are not ‘down south’ rest easy, you will get to experience the show vicariously 🙂
CYA RIVERHEAD TAVERN CRUISE – THIS SUNDAY (24TH)
A quick heads up for CYA launch owners – this Sunday we have a brunch cruise to the pub.
High water is approx. 12:07pm so we will be sliding up the creek around 10:30am.
For those who keep their boats citywide of the Harbour Bridge, there will be a gathering near the bridge with a departure from there at 9:30am
Normal rules – Indian file up the creek & bring a dinghy to get to the pontoon. Its a big tide i.e. 3.5m BUT that also means a very swallow low water.

Australian Wooden Boat Festival 2019 – Photo Parade – Part 3 – 90 photos + video

Photo 8-02-19, 18 21 59

Photo 8-02-19, 18 22 14

Photo 8-02-19, 08 45 37

TAMARIKI – Peter Mortimer

Australian Wooden Boat Festival 2019 – Photo Parade – Part 3 – 90 photos + video

For the few of you that have seen enough beautiful boats in the last few days, I promise today will be the last AWBF photo gallery. But for the record Tuesdays AWBF WW story out performed Mondays story and had in fact the highest number of views of any story on WW in the last 12 months 🙂
Today our gallery comes to us from the camera of CYA NZ Chairperson – James  Mortimer. On top of capturing some great photos, James was in a very unique position at the festival – his father Peter was exhibiting the 1979, Gary Wheeler built yacht – Tamariki (photo above), which was the only NZ flagged boat in attendance, and they briefly had the past two NZ CYA chairs and the current one on board for a beer at the same time, nice.
Again, different person = different perspective – enjoy and remember , click on photos to enlarge.
And as a bonus we also have a video of the James Craig leaving her dock – would be nice to have a vessel of her presence based on the Waitemata. Filmed by Andrew Christie.

Australian Wooden Boat Festival 2019 – Photo Parade – Part 2 – 337 photos

DSC05566

DSC05184

DSC05461

DSC05551

Australian Wooden Boat Festival 2019 – Photo Parade – Part 2 – 337 photos

One of the interesting things reviewing all the photos that have been sent in from the festival is that each person ’sees’ the festival through different eyes – so what they end up photographing is very different from someone else.
Todays collection from Fiona Driver and Rod Marler is a perfect example, it is a very different view from yesterdays and also shows the scale of the event. Worthy of its own WW story.
I could have edited the collection down, but the photographer/s are very passionate woodys so if the image appealed to them, I’m confident it will to you. Enjoy 🙂
Scroll down after todays photo gallery to view more of the festival in Part 1 of the coverage.
And remember , click on photos to enlarge.