Category Archives: Sub 28′

Herne Bay Cruising Club + Help Needed ID’ing Some Woodys

Posted on by
7

Sloanes Beach Regatta and Centreboard Cup

If you are wondering where Sloanes Beach is – google it. It is one of Aucklands hidden gems in the suburb of Herne Bay. The regatta is very low key, almost secret hand shake low key. Each year I try and drop in and grab a few photos to help promote the club (Herne Bay Cruising Club) http://hbcc.net.nz/

I had a full dance card yesterday, so only stayed for the start of the ‘bigger’ boats race. A little overcast but as I was leaving the sun came out and the wind picked up.Spotted an original burgee from the Auckland Motorboat Club handing from the rafters – you do not see many of those around these days.


Mahurangi Cruising Club / Regatta Year Book

The perfect stocking stuffer – available now at Boatbooks in Westhaven (or on-line) + at usual outlets around Warkworth.


Looking For Something Bigger

Grab a copy of Brian Peets book – Des Townson – A Sailing Legacy. A must for every kiwi yachtie and even launch owners 🙂 Also available from Boatbooks or https://destownson.co.nz/

WW Xmas Quiz Winners

Matthew Drake, Ken Goa, Simon Smith, Nick Voerman, Jason Prew – prizes on the way to you, if you have supplied your postal details.


Help Needed – Yacht Sojurn

WW has been contacted by Zoe Hawkins in regard to the yacht – Sojourn.Zoe is writing a story on the Northern Manukau Harbour and is looking for intel in regards to the keeler. She was built by the Davis Brother in Titirangi in the 1950’s. Zoe believes that It was put on the road and sold after one of the brothers became too sick to finish it and go sailing, most likely this was the 1960’s. An help very much appreciated. Two photos below.  


And More Help – Yacht Hawk V67

Yesterdays WW story featured small boat builder – John Maxwell – recently when John was cleaning out his parents home, he came across the hand coloured old print, below, of the yacht Hawk V67. John told me that if the boat is still around, then maybe the current owners may like this photo. It isn’t large but is better condition than the photo shows. 

Classic Wooden Small Boats

Posted on by
2

Classic Wooden Small Boats
In the days before remote controlled model yachts – the yachts were divided into two kinds – Free sailing – were boats were sailed in open water and ‘chased’ by their skippers in dinghies who ’touched’ the yachts during the course of the race to adjust their course.

The other kind was – Pond yachts, sailed on small lakes, basins or special ponds (in parks), the skipper would race around the pond to tack or gybe the model as it got close to shore. Refer b/w photos below for examples of the racing.

The top colour photos were sent to me by an ex work colleague – John Maxwell, we worked together over 30 years ago in the crazy world of advertising in the late 1980’s. Unknown to me, one of John’s passions is the building of old style pond yachts, but with a modern take, refer examples above of Ranger, Innismara, Infidel, Meter class (black hull) and one in the vein of an A class. Not exactly accurate, but instantly recognizable as the original. They are all hand painted, so as to faithful to the old style. John commented that the problem with making the models sail, is that the depth of the keel, mast position/ height etc, have to be altered slightly from the plans of the real boat, otherwise it just sails sideways or rounds up into the wind. John aims to capture the spirit of the original, but still maintaining the ‘Old school’ charm of the yesteryear pond yachts. They are all free sailing models and quite big ie 1.8 m long. Typically they have a lot of lead on the keels approx 15-20 lbs., most are balsa over wooden frames with glass over the top. 
Stunning work – but it doesn’t surprise me, John was / is a very talented man, and rather good with a paint brush and canvas.

Chantal – Sailing Sunday

Posted on by
3

Chantal – Sailing Sunday

Chantal was designed, and built in 1981, by Denis Brown, in the Bay of Islands. LOA 8.24m, DWL 7m, Beam 2.1m, Draft 0.9/1.9m Displ 2,450KG 

A 3/4 rig, double ended, centreboard, sloop, that is easy to sail single handed, and very quick in light air. Great for cruising, as the shallow draft with the board up, gives you more options for exploring and anchoring. Fun to race as she is pretty efficient up wind, and has very low drag on a reach. Sailing photos taken during the 2017 Tall Ships Classic Invitation Race.

Constructed in Radiata Pine and Kahikatea, opposing diagonal 4.5mm laminated  planking, outer sheathing 5mm lamination longitudinal. Everything well soaked in West System Epoxy. Centrecase fabricated in 6mm mild steel plate, which holds 1200KG of lead ballast. Centreboard is solid Kauri. Shaft tube and bearing setup for a small inboard motor, which we installed back in 2000 and removed again in 2001.

Sleeps 4 comfortably, and while space is fairly tight the arrangement feels generous. Single burner gas stove, storage space for a medium sized chilly bin and jerry cans for water. Torches and candles for lighting, and a chemical toilet. A very simple set up.

(details & photos ex owner – Bruce Mitchinson)

WIN AN OFF CENTER HARBOR CAP

All correct answers to the question below, go into the draw to win an OCH cap. Enter via email only at waitematawoodys@gmail.com Closes 8pm 13-12-2020

Q – Name Bruce Mitchinson’s classic launch

SCROLL DOWN TO YESTERDAYS STORY – STARTED OFF WITH ONE OLD PHOTO, MORPHED INTO AN AMAZING RESTORATION STORY 🙂

Seacraft Clinker Dinghy For Christmas

Posted on by
Reply

Seacraft Clinker Dinghy For Christmas

After yesterdays mammoth story on the Patio Bay weekend, today we come down to earth with a woody at the other end of the scale.I have been contacted by Jill & Laurie White looking for the next owner of their 10’6” Seacraft clinker dinghy. The White’s used to own the launch – Siesta, but have moved on and would now like to pair the dinghy up with a woody classic or maybe a lake based woody looking for a cool trout fishing boat. Laurie mentioned it tows and rows beautifully.

The build date is probably c.1960’s and a previous owner told the Whites it was built from Sumatran mahogany. Back in 2014 the dinghy was paired up with the road trailer seen in the photos, also available is a Yamaha 4hp. 


So woodys – looking for a fun boat for the xmas holidays? Use it this summer and then pop it in the shed for a make-over next winter. 
Interested buyers – contact initially via email – waitematawoodys@gmail.com

WIN A LAKE ROTOITI CLASSIC & WOODEN BOAT 2021 CALENDAR


All correct answers go into the draw for a copy of the LRCWB calendar. Drawn 8pm 08-12-20. Enter via email only – waitematawoodys@gmail.com
Q – Which classic yacht won line honours in last weekends CYA race to Patio Bay?
Hint – you might have to read yesterdays story to find the answer 😉

TUI – Clinker Steam Boat

Posted on by
Reply

SS TUI – Kauri Clinker Steam Boat
It thought that Tui’s 15’ kauri clinker hull was built c.1920, then as part of her transformation to a steam boat the hull was restored where necessary and the exterior was fully clad in f/glass.For the steam boys I have reproduced the mechanical specs below from her tme listing (thanks Ian McDonald):

The boiler is of the Ofeldt type with a 6mm thick steel central drum and has 12 1/2″ copper coils surrounding it. The boiler is fast steaming, reliable and safe. Stainless steel cladding and stainless steel funnel. The steel firebox with adjustable dampers runs on char, coal and wood.

The 2hp engine is by Wayne Larsen and is single cylinder double acting 2.5″‘bore x 2.75″ stroke. It has a balanced crankshaft and semi balanced slide valve, with Stephenson’s reversing gear, twin boiler water pumps and a vacuum pump with exhaust steam passing through a feed water heater and keel condenser to the stainless steel hot well. The propeller is 14.5″ x 23″

An auxiliary boiler hand pump and is fitted with an electric water pump as a backup. A Stainless steel top-up water tank is in the transom with a stainless steel hot well placed just in front of the Boiler. A Steam bilge ejector is fitted for removal of any bilge water.

She is fitted with a Windermere Kettle to allow the crew to make a hot cup of tea/coffee on the run.

Mystery Launch at Whau Creek

Posted on by
1

Mystery Launch at Whau Creek
The photo above of the very unconventional launching of a 26’ cabin cruiser in the Whau Creek , New Lynn is big mystery. The people in the photo appear youngish and a tad nervous  🙂

Photo is an old press clipping ex Lew Redwood’s fb, but no dates. We do know she was built by Mr L Knaggs of Sandringham for a Mr J. Harvey of New Lynn.There was mention on the press clipping that the launch was built to an American design.


Anyone able to ID the vessel?

Input below from Nathan Herbert

Sea Spray

Posted on by
5

SEA SPRAY
During the week I was chatting to Lake Rotoiti boat builder Alan Craig and he mentioned that he was scoping out a 1956 built, 17’ kauri clinker run-about on tme for a client. The boat had a J. Logan builders plate and we both wondered if it was ’the-real-deal’. On these matters there is only one go to guru – so a quick email to Harold Kidd confirmed that Sea Spray was indeed built by Jack Logan, and HDK had had a lot to do with Jack Logan and the Chappies, who had a twin to his boat on Lake Okareka. That intel was enough for Alan to buy the boat.


Alan understands that for a lot of the boats life, it was north of Tutakaka.
The new owner has x2 Arona 10hp engines and gearboxes, which fingers crossed,  one will go into the boat.Having witnessed the work of Alan’s yard – Sea Spray will emerge as an awesome addition to the woody lake fleet. Alan has promised to keep us updated with work-in-progres photos 🙂


Anyone able to add to the boats provenance?

John Spencer – Champion of the Amateur Boatbuilder

Posted on by
Reply

John Spencer – Champion of the Amateur Boatbuilder
For the last 3 days the annual classic yacht and launch exhibition, hosted by the Tino Rawa Trust, has been on at Kairanga Plaza, Halsey St, Wynyard Quarter. This year the star of the show is the late designer John Spencer.  You can read more about John below. 

On Friday I got a sneak review of the event at the opening legendary morning tea, that always sees the who’s who of the wooden boating movement making an appearance.
The show is on today from 10am >4pm, so not too late to pop down.

One of the invited speakers was John Street, now when ever John steps up to a mike – I push record. His words are always outstanding, push play on the video below and you’ll have a chuckle as John relays a few memories of times with John Spencer, Turn the volume up 🙂

Beaulieu River Wooden Boat Gathering

Posted on by
2

Beaulieu River Wooden Boat Gathering
Today we join the crew over at classic yachtTV when they attended the Beaulieu River Wooden Boat Association get-together at Buckler’s Hard, UK.

It is a great read with stunning photos and words from the very talented Emily Harris. Clicking on most photos will enlarge them. Enjoy 🙂
Hopefully a lot of you will be afloat today enjoying the public holiday.

LINK TO STORY HERE http://www.classicyacht.tv/journal/an-invitation-to-beaulieu?fbclid=IwAR0t3bb2r60BESnqE44izKexo6HXSu5mVDSIROjHFPGvmCAd59Q5J7DyZyU

A Woody For The Lake Boys

Posted on by
Reply

A Woody For The Lake Boys
Kiwi woody Mark Erskine gave WW the heads up on Miss Tessa, currently for sale in the USA. This would have to be a great buy for one of the Lake Rotoiti gang, current bidding is sub US$6k.


Miss Tessa is a 1930 Dodge* 16’ runabout with two cockpits separated by an engine compartment. The boat features a planing, seam-and-batten mahogany hull with spruce stringers and oak frames. Power comes from a Lycoming inline-four, and additional features include a forward/reverse transmission, double-planked bottom, two-piece windscreen, and blue vinyl upholstery. The Lycoming marine inline-four engine is mounted amidships and produced approximately 45hp when new.The boat was found hanging in a barn by the previous owner, who commissioned a restoration before donating the vessel in the early 2000s to the seller, the Tahoe Maritime Museum. Comes with a very cool trailer, which I imagine is only for off road use.
*Horace E. Dodge Boat Works was started by Horace Dodge Jr., the son of Dodge automobile company co-founder Horace Dodge. 


View and read more here https://bringatrailer.com/listing/1930-dodge-runabout/