Category Archives: Non Waitemata

Mapu Gets A Refresh + New Woody Event Dates Released

Posted on by
2

MAPU GETS A REFRESH 

The 30’ 1914 Lane Motor Boat Co.designed and built launch Mapu has just emerged from the Blair Boats yard in Oromahoe, Harare (Far North) after a some TLC.

Mapu is one of the lucky woodys, still in the family of the great grandfather that built her. Like most woodys from her era she has undergone several additions / configuration to her tramtop / doghouse but the hull is still the original solid carvel planked kauri.

While it appears from the photos that she has lost her varnished coamings – I can report they were never varnished – the finish was a very smart brown paint and made of ply.

Mapu has appeared numerous times on WW – lots of history and photos in the links below.

MAY 2023 https://waitematawoodys.com/2023/05/28/the-launch-mapu-far-north/

JUNE 22 2013 https://waitematawoodys.com/2013/06/22/mapu-2/

JUNE 1 2013 https://waitematawoodys.com/2013/06/01/mapu/

Photo (L) below ex Nathan Herbert 2016

Photo (R) below ex Mark Lane 2013

2023 CLASSIC WOODY ON-THE-WATER GATHERINGS – DATES

Has it stopped raining………. I’m too embarrassed to tell you how many nights I’ve spent on the boat this year, makes the return on investment look very sad. But thankfully most of us don’t measure life on that template.

So on the assumption that the current meteorological conditions will end , we have pulled together a calendar of woody gatherings for the 2023 spring > summer period. Later in the year we will publish the 2024 calendar.

So woodys circle these dates on the calendar, and we will talk to you closer to each event.

In the meantime, light the fire and open that bottle you have been saving for a special occasion. 

Fraulein Maree

Posted on by
2

FRAULEIN MAREE

The 36’ Fraulien Maree would probably just just slip into the CYA criteria as a classic, designed and built by Jim Ashby in 1967. Her tme listing states that she is a Mullet design, someone from the yotting fraternity will have to explain that. Built with kauri planks on Kowhai frames and matte decks. Rather a sexy stern.

Her interior is very salty with that classic Herreshoff look – white panels with varnished trim.

When the wind dies there is a 30hp Vetus diesel to push her along.

MYSTERY LAUNCH 30-06-2023

Posted on by
6

MYSTERY LAUNCH 30-06-2023

Todays woody was nearly one of those projects that got started then life and time got in the way – thankfully Simon Raikes discovered the hull and took on the project.

What we see above is the result of Simon’s very talented skills. Simon’s company Craftbuilt won the 2023 Supreme Award at the Master Joinery Awards.

The launch is 30’ in length, constructed of diagonal laminated kauri planks and powered by a 80hp Ford D series engine. Not a lot more is known about the launch, so if anyone recognizes her – let us know.

2023 Moreton Bay Classic

Posted on by
2

MORTEON BAY CLASSIC 

The classic boating community in Brisbane / Queensland Australia have just celebrated the second running if the Moreton Bay Classic – a 10.9 nautical mile drag race for all shapes and sizes of classic craft. Last year was the inaugural event – link here to details on the event and how ir came about https://waitematawoodys.com/2022/07/04/the-race-social-event-that-stops-the-bay-the-moreton-bay-classic-part-one/

First video – the start from onboard the vessel – Adagio 

https://www.facebook.com/adagioalaskan/videos/1900175600355472

A woody friend, Andrew Christie also sent me a link to a 3 minute birds-eye video of the fleet filmed by Saxton Thomas – what an impressive gig. I can see Jason Prew salivating over this 🙂

Enjoy.

https://www.facebook.com/100023439100358/videos/204917255845751/

Triton V – A Peek Down Below

Posted on by
5

Triton V – A Peek Down Below

It always amazes me when people trying to sell a vessel go to great lengths to tell you about how many it sleeps, how comfortable it is and I quote “features an actor winch” but tell you nothing about the age , who built it etc. Its a little like advertising on trademe – Car For Sale, 4 tyres and comfortable seats.

Putting this to one side – Triton V is 45’ in length, powered by twin Ford 120hp diesel engines, giving her a cruising speed of 8.5 knots.

There is even a nice video, but no audio  https://youtu.be/Ykx_U95a0Bo

Can any of the Motueka woodys enlighten us more on Triton V.

INPUT EX RUSSELL WARD – photo below was given to RW by Layne Stephens of Triton in her original form. Russell commented she would be much more liveable with that top but he would rebuild the original. 
Original owner Ken Butland used to take sea scouts out to teach navigation. She had a folding chart table and the orders would come down an ex Navy voice pipe from up top. 
Triton slipped along quite well with her original petrol engines – quite a slippery wee hull.
Joe Tatham had her in the 1960s and his kids reckoned she was a real roller.

And more ex RW – Colin Wild built her but refused to do the open bridge that Ken Butland wanted. Lanes finished that off. She was a little MTB and rather tasty. Layne Stephens did the closed in wheelhouse up top in later years. More habitable but I preferred her original config. An early owner was quite tall and had the wheelhouse top raised -you can see the line. Dunno where the V came from.

AND THE WINNER OF SATURDAYS QUIZ RE THE LOCATION OF THE AUCKLAND MOTOR YACHT CLUB LOGO IS – Russel Ward . The answer was on the front door of what is now the RNZYS Training Building in Westhaven.

EUREKA  – Looking For Help ID’ing This Woody

Posted on by
1

EUREKA  – Looking For Help ID’ing This Woody

Todays woody – Eureka, comes to us from Kelly Ellis via fb via Ken Ricketts. The location is Havelock and that woodys is all we know. 

A very distinctive looking craft so no doubt one or more of todays readers will be able to tell us more about Eureka

INPUT EX GARY CHAPLIN – link below to an article that appeared in the Southland Times on August 30 2015. Lots of photos & video footage.

https://www.stuff.co.nz/southland-times/news/71572730/southland-boat-eureka-relaunched-100-years-after-maiden-voyage

NAME THE LOCATION – Win A WW Cap

Email in the location of the image in the photo below and all correct entries go in the draw for a WW cap. waitematawoodys@gmail.com    Closes 6pm 25-06-2023

AUCKLAND MOTOR YACHT CLUB

Marlborough Sounds 30’ Classic Launch

Posted on by
6

Marlborough Sounds 30’ Classic Launch

Today woody recently popped up on tme (thanks Ian McDonald), the listing doesn’t tell us anything about who built her and when but what we do know is –

30’ in length, she started life as  a trawler from Greymouth. Then brought up to Picton and at some stage converted to a yacht then filled wth concrete to negate the need for chalking caulking. Later convert to the launch configuration we see today.

Forward motion is via a  30hp Yammer engine that sees her cruising nicely at 7>7.5 knots.

Can we have a crack at the design / builder and a new would be nice. Can’t see her moving from the south so fingers crossed a southern woody is looking for a low entry woody that with a small investment could be a very smart sounds boat.

WHAT DO MOST PEOPLE WANT FROM A CLASSIC WOODEN BOAT GROUP

The answer is very simple – events + know how + friendship Seems that Lake Rotoiti’s Classic & Wooden Boat Association know the answer 🙂 Lets hope ‘others’ take notice 😉

Mystery Lake Rotorua Launch #2

Posted on by
9

Input from Janice Rogers – “The house in this photo belonged to my grandparents and I lived in it as a child at Otaramarae. I remember 1 of those boats is called the Kay and I recognised the other smaller one as well. The Kay was tied up down at our jetty in the enclave below my grandmothers house I know because I went for rides on it the rear of the bigger boat now has a ramp and has pretty much progressed from when I was a 12yr old 

I got a fright when I saw those photos online golly bought back many memories 

Judge Simon Moore’s parents had a house right on the lake but it often flooded many years later that land was leased to his parents by my grandfather so there you go a piece of history for you”

MYSTERY LAKE ROTORUA LAUNCH #2

Todays woody again comes to us from Greg Philpott, hopefully we will get a better response than last weeks WW story concerning another of Greg’s mystery boats. I suspect that Greg has exhausted most avenues and people ’switch off’ re his pursuit for answers.

The transporter / truck door reads – E.G. Maurice, Cartage Contractor, Rotorua

But its worth a final try – so woodys anyone able to enlighten us on the above launch.

And while we are in the middle of the North Island – circle 8th July 2023 in the diary for what looks like a cool classic event – details on the website – see poster.

lhttp://lakehop.co.nz

Mystery Lake Rotorua Launch

Posted on by
Reply

MYSTERY LAKE ROTORUA LAUNCH

We know a lot about todays woody – but no name, builder or what became of her.

What we know – possibly built in 1927, 27’ in length with a beam of 7>8’. When launched powered by a 4 cyl. Ailsa Craig engine.

Initially a family launch, she was later moved to Lake Rotorua The photo above is dated March 1932 and is when her then owner Ted Fenton obtained a license to carry fishing parties.

The photo is ex the Don Stafford collection at the Rotorua Museum and is tagged ‘ Dads Boat’. Photo and details shared by Greg Philpott.

Can we put a name and builder to her and discover what became of her.

WW Caps – low profile, 6 panel, canvas caps in the new camel colour topped with dark brown WW embroidered logo has a dash of understated style.

just click the email link here and tell me your name, postal address and number of caps required. I’ll come back to you with payment details – $38 + $6 p&p. waitematawoodys@gmail.com

LADY GLAD – Electric Conversion

Posted on by
2

LADY GLAD – Electric Conversion

Todays story was written by Richard Amery on of the Lake Rotoiti woodys. Richard has pulled together the background on the launch – Lady Glad, owned by Marcus and Jan Wilkins, and her conversion from diesel power electric – I’ll hand over to Richard now – note: slightly different layout today with the photos in the story text.

“The keel was laid in 1981 by Mr. Bill Visser attached boat builder who had settled in Tauranga and started building boats under the name Kingfisher Boats limited, in a shed where the present oil terminal at the Mount is today before moving to Omokoroa. Bill was asked by Mr. Marshall Lee to build a small tug for him to tow a barge between Matakana Island and Omokoroa for his farming operations and it was to be named “Lady Glad” after his mother.

The tug was to have a gas stove and two bunks in it. The bunks had been beautifully painted with scenes by local young artist Alice Blakely, but unfortunately they were pulled out and lost.    Bill Visser was an artist with wood, and he carved the name along with the scroll and the tiller handle and also built the steering wheel which in itself is a work of art. The back deck was to have a bollard for towing mounted in the middle with the underneath area to be able to hold a farm bike and tools. This was all removed and Bill made the rear cockpit as it is now.   The motor was a Yanmar 32HP diesel.

However, before her completion Mr. Lee sold the property and we purchased the Lady Glad, and Bill Visser completed her at his home workshop, hence she never got to sea, and was launched on Lake Rotoiti in 1985.

In 2022 by age 87 Marcus with Jan 86 were sick of climbing over the motor and made the decision to bite the bullet and fit her with a more compact electric motor and batteries.              With the expertise of Tony Whiting, marine engineer of note from Auckland, Alan Craig boat builder and his team, Miles Harnett on boat electrics and local electrician Simon Andrew to sort out the mains electric charging system, the task provided quite a challenge for them.

The power comes from eight 6 Volt batteries weighing 400kg coupled in line to produce 48 volts. This was a little more weight than was removed, and the charging unit for these and the house battery which looks after lights, radio, auto bilge pumps etc are fitted up in the bow.                                                                                                                                                             The shaft thrust bearing, special coupling to motor and mounting bracket etc central and the redesign of rudder, keel and propellor are all part of the team’s combined thoughts and expertise that went into this conversion.

                                                                                                                                                  The shaft thrust bearing, special coupling to motor and mounting bracket etc central and the redesign of rudder, keel and propellor are all part of the team’s combined thoughts and expertise that went into this conversion.

Lady Glad’s heart transplant is now completed with the Combi inboard 10kw electric motor with a Combi Inboard 10 kW electric motor made in Holland, the home country of her designer and builder.

We are delighted with the result, and along with a new cockpit and cabin layout has transformed Lady Glad into a lovely comfortable easy to use craft.

Marcus and Jan say thanks to ‘the Team’. “

Note: Available now for sale in excellent condition: The 32hp Yanmar Diesel engine, hydraulic gearbox, heat exchanger, flexible shaft coupling, bilge blower, hand & electric bilge pumps plus gauges and wiring loom- a great unit in excellent condition. Phone or Text Marcus to view 027 955 2213.