Category Archives: Non Waitemata

Classic Wooden Boat Project

Posted on by
2

Screen Shot 2019-06-27 at 6.02.56 AM

Screen Shot 2019-06-27 at 6.04.11 AM

Classic Wooden Boat Project

It’s been the week of project boats – for some reason they just keep popping up, thanks to Ian McDonald for the trade me heads up.

Today’s woody was built c.1930, carvel planked kauri and 26’ in length. She has a Nissan TD23 diesels engine, not sure of the condition. The listing says the hull is in good condition – but its a bit hard to tell, that grey undercoat is a bit like black stockings e.g. hides a magnitude of sins 😉

Currently hauled out in Kerikeri, Northland.

Keen to learn more about this woody – name?, designer / builder? – anyone able to help out?

 

Ruahine > Whizzbang SOS

Posted on by
3

Screen Shot 2019-06-25 at 8.54.23 PM

Screen Shot 2019-06-25 at 8.56.40 PM

RUAHINE SOS
Ruahine, previously named Whizzbang is in need of urgent help / saving. The Taupo Harbourmaster has put the 26’ woody up for disposal (landfill) if no one acquires her before 21st July.
Ruahine was previously berthed at Nukuhau Marina, Taupo – where she was abandoned. She can be viewed on the hard at Lake Taupo Marina.
She was appeared before on WW (2013) but sadly she has ’slipped’ in terms of maintenance / presentation – hopefully someone will save her and return her to her previous state. Make sure you read the comments section. https://waitematawoodys.com/?s=Whizzbang&submit=Search
Powered by a 4 cya. Isuzu diesel.
There must be a woody looking for a low entry ($) project. Photo below of her in 2013, looking very smart.
If no one steps up and she is heading to the landfill – I want the forward cowl 😉

Update ex Paul Drake

The photo below shows RUAHINE  in happier times (c.1970’s) at Waihaha, Lake Taupo.
On her foredeck is Ray Perry who saved her the last time she was abandoned.
Paul commented that he wondered how many boats have the distinction of being abandoned twice in their lives, nearly 50 years apart?
She is certainly worthy of saving, and can get along quite quickly with her Isuzu.
Ruahine c.1970 ex Paul Drake
UPDATE 29-07-2019 GREAT NEWS !!!!

“Well, now I’m the new owner of ruahine formerly whizzbang.
She was delivered to my driveway last Saturday 27/7/19.
She seems to be in good nick. I plan to strip the hull, repair and repaint.
There is rot in the cockpit and a bit on the gunnal. So after hull it’ll be replace and rebuild the top. Inside will be a new refit.
Engine appears to be in working order, will give that an overhaul in time as well.
My go is to have her back in the lake by summer…..

I am very interested in any of her history, so if anyone can provide me with some leads on getting further info I’d really appreciate it.
I’ll keep you all updated with my progress.
George”

Miss Sandra (Kokiri)

Posted on by
6

Screen Shot 2019-06-23 at 10.08.23 AM

Screen Shot 2019-06-23 at 10.08.12 AM

MISS SANDRA (Kokiri)

Today’s woody comes to us via Greg Philipott’s fb page. Greg commented that Miss Sandra was built c.1962, probably in Auckland (tbc).
She was named after Lola and Snooks Fuller’s daughter. Then renamed Kokiri after NZ Shipping / P&O purchased Fullers from George Wooller.
Chris Brittain commented on the fb post that Fullers repowered her with a GM 671.
Nathan Herbert also commented that her hull looked like an early Jim Young design.
Greg is keen to learn more about Miss Sandra. So woodys any details, stories, photos?
Input from Graham Clifford
“I was a full time skipper of Miss Sandra from 1967 – 71 when she was engaged in big game fishing, light tackle winter fishing and occasional runabout duties.  I continued my association with her on a piecemeal basis in the years after she retired from fishing in 1971 and took her new name “Kokiri.”  Under this name she was used variously as a scenic cruise boat,  a pilot boat to and from ships visiting Port Opua and a general roustabout.
Miss Sandra was a 36 foot Vindex hull built of kauri in Fullers new slipway shed at Russell in 1966.  I was present during her construction.  In late ‘66 I took over as her gamefishing skipper.  Together we captured a 547 pound blue marlin.  The following season, in March 1968,  we landed and weighed the biggest marlin caught in New Zealand waters, a blue marlin of over one thousand pounds (1017 lbs)
Miss Sandra was originally powered by a 6-cylinder Fordson diesel but was soon repowered with a Caterpillar turbo charged engine which gave her a top speed of 20 knots light. I used this engine for more than two years.  In 1967 I used Miss Sandra and her speed to assist Police in the transfer of a stabbing victim from a ship which arrived in Doubtless Bay. The victim (Wylie Hanby Roberts) needed hospital treatment and would have certainly died had the ship not diverted to Doubtless Bay.  Miss Sandra had the speed to get from the Bay of Islands to Doubtless Bay in time to meet the ship offshore.   The Caterpillar engine was replaced in 1969 with 6 cylinder Fordson and again with another Fordson.  Her final re-powering was with a noisy GM which coincided with her name change to “Kokiri.”  Her gamefishing days were over.  She became a part time scenic cruise boat fitted with airline-style seats and a small public address system.  This role did not suit Kokiri well and I personally shunned her other than to favour her for pilot duties.  The two principle maritime pilots liked her for her speed.”

PIKO – A peek down below

Posted on by
2

Screen Shot 2019-06-23 at 7.33.05 PM

Screen Shot 2019-06-23 at 7.40.25 PM

Screen Shot 2019-06-23 at 7.38.57 PM

PIKO – A peek down below
Piko was built in 1924 by Collings & Bell and is 28’ in length, with a 6’ beam and she draws 2’.
Power is from a 2002, 18hp Volvo diesel.
Her current home is on Lake Rotoiti (Nth Is.) She has made numerous appearances on WW before as part of the annual Lake Rotoiti Classic and Wooden Boat Parade.
She has just popped up on trademe with a very realistic price of $15k, needs some TLC to the interior but nothing most of us couldn’t do.
Interested in hearing more about her past life i.e. has she always been on the lake and if not where has she been over the years.
Harold Kidd Input – PIKO was built in Parnell in September 1927, designed by and built under the supervision of H.N. Burgess, formerly boatbuilding in Judges Bay. Her first owner was J Bates. She had a Briscoe heavy duty engine. Bates kept her at Judges Bay. Not Collings & Bell.

Murray Deeble Input – She was on a mooring off Akarana prior to being transported to Tauranga/Rotoiti in the early 90’s

Diana White

Posted on by
2

20161118_134743

DIANA WHITE

Today’s woody story is a tad out there – we have a 38’ ex lifeboat looking for a new home. Well to be honest we are really looking for a woody with a big shed and lots of vision. Owner John Fairburn wrote to me saying he had too many projects on the go and needed to find a new home. I’ll let John tell you in his words:

“Diana White has crossed the Manukau Bar in extreme conditions without a worry and travelled at sea when no-one else was, is now for sale. It had always been a slipway boat until it’s 1st private owner previous to me took it over and the huge anodes that earthed the SSB radio brought on a softening of timber through electrolysis around bronze, stainless and galv steel plus alloy cabin.

A lifeboat has many compartments held together with many bolts and special bronze and galvanised steel framework that had begun to rust in a few spots, so it took a bit to get back to bare hull to work on any soft stuff, and then I was going to use epoxied timber to rebuild. It’s a double ender 37’6″ x 12’0″ x 3’6″ with 2 x 23″ propellers in tunnels and weighed 13 tons. 

I was going to re-power and fit twin rudders so sold the 2 D series Fords that returned a litre per nautical mile at sea. At the moment it’s a bare hull so easier to survey (tap hull for soft timber) and is much reduced in weight and therefore easier to transport. I was in process selling props / shafts / stern-tubes / stuffing boxes and couplings, rudder, stainless bow rails and alloy swing down mast with radar reflector and 2 x stainless fuel tanks and the guy across road wants to turn hull into a house/cabin but a local Katikati boat owner reminded me of Waitemata Woodys, so if someone wants to pay me $3000 they can have the lot complete with RNLI drawings (1 inch to the foot) so they can plan their finished project.

I’ve still got a big oak tiller that has bronze end fitting that clicks into bronze shoe for manual steering and a special cutting tool to clear propellers through tunnel access ports.”

20160929_163234

Hinewai – A peek down below

Posted on by
2

Screen Shot 2019-06-19 at 1.09.17 PM

Screen Shot 2019-06-19 at 1.09.58 PM

HINEWAI  –  A Peek Down Below
Thanks to Ian McDonald giving me the heads up on Hinewai’s trademe listing, we all get to see what this very salty trawler style woody looks like down below.
Designed by Roger Carey, she was built by John Gander in 1968 – measures 39’, with a beam of 14’9″ and draws 4’11”.
You can read and view more about Hinewai at the March 2015 WW story – link below

https://waitematawoodys.com/2015/03/28/hinewai/

Gaff Schooner Collides With Container Ship – Overseas Report

Posted on by
6

Screen Shot 2019-06-09 at 4.56.46 PM

GAFF SCHOONER COLLIDES WITH CONTAINER SHIP & SUNKS – Overseas Report
 

The gaff schooner Elbe No. 5 collided with a container ship in the Elbe river (Germany) last weekend. The boat sank after the collision with the rescuers managing to rescue 43 passengers.

The historic 1883 built, 121’ vessel had only just returned to Hamburg’s waters after it had spent eight months in a Danish shipyard undergoing a €1.5 million renovation and was relaunched only days before the collision.

She was struck by a 462′ container ship, the Astrosprinter and suffered serious damage and sank, though rescuers were able to secure the wreck relatively close to the surface.
The container ship continued its voyage, having suffered almost no damage. Apparently, the container ship was out of her channel and likely at fault.
So woodys this serves as a warning to be very careful out there, particularly as the Auckland council continue to expand the container port into OUR harbour…………….
Screen Shot 2019-06-09 at 5.00.41 PM

Koura

Posted on by
Reply

Screen Shot 2019-03-07 at 6.31.40 AM

KOURA
The launch Koura was on trademe earlier this year – she measures 24’and was built by Ford (Sam Ford?) at Ellerslie in the 1930’s. 
Powered by a recently refurbished  30 hp Yanmar 3 cylinder diesel engine. 
From the above photos she appears to a well presented woody.
 
Do we know anymore about her past & whether she sold and if so where is she now?

Mystery Launch – Manukau Harbour

Posted on by
6

Screen Shot 2019-06-02 at 8.31.04 PM

Screen Shot 2019-06-02 at 8.30.52 PM

 

MYSTERY LAUNCH – MANUKAU HARBOUR

The above photos come to us via Lew Redwood’s fb and the caption reads “1920’s Bill Foots launch, Manukau Harbour”
I’m sure one of the woodys will be able to tell us who Bill Foot was and hopefully some details on his launch.
Check out WW tomorrow, a rather nice entry level woody has just come on the market, a perfect boat to enjoy the world of classic woody ownership 🙂

 

Ngaru

Posted on by
4

Screen Shot 2019-06-07 at 2.57.31 PM

Screen Shot 2019-06-07 at 2.59.07 PM

NGARU
Ngaru’s trademe listing (thanks Ian McDonald) states that she is an old Sounds launch that made her way across Cook Strait to Wellington 20 years ago.
She has had the same owner for most of that time, but changed hands 18 months ago. During this period her current owner has undertaken a lot of system upgrades and caught up on her maintenance. Changing circumstances are the reason for the sale.
Ngaru is 27’ in length and powered by a Nissan LD20 diesel, that’s sees her cruising at 6 knots.
With some TLC Ngaru would make a perfect boat to enjoy Wellington Harbour and beyond.
Does any of the Southern woodys know more about her past?