OUTSTANDING IN A PADDOCK – Duke of Marlborough

OUTSTANDING IN A PADDOCK – Duke of Marlborough

When I received the photos above the first thoughts were ………… where and why. 

Chatting with the sender, Ant Smit, I learned that the location was the MacKenzie Basin, which is situated approx. 1/2 way between Christchurch and Queenstown in the South Island. The area is almost the dead centre of the island.

Ant advised that a friend was on a motorcycle tour and spotted the boat and couldn’t not stop and snap a few photos.

I quick chat to my WW steam guru – Russell Ward and we learn she was purchased ex Picton and should currently be viewed as ‘art’. Lets hope there is a long term plan to restore her.

Her back story is a good read and she appeared on WW in May 2020 – link below. We learned then she was made of steel in 1987 and was originally named – James Torrey, and was used for trout fishing tours on Lake Tarawera –  lots of details in the story. In the photo below we see her at Picton when she was running as a commercial passenger vessel.     https://waitematawoodys.com/2020/05/17/ss-duke-of-marlborough/

Anyone able to enlighten us more on her future 

INPUT ex DAN CONAGH (owner) – I can confirm that I’ve purchased and moved the Duke to a section of land I own in Twizel. Our intention is to restore, repaint and return to service on one of the lakes in the MacKenzie District.

Unfortunately the boat is showing the signs of having been stored next to the ocean in Picton. The hull has some rust that requires attention. The wooden topside has some sun damage. New varnish required, and the PVC roll up sides are beyond repair. The photos in this article are very recent as I was up there on Saturday cleaning up all the coal spread across the floor inside.

KIRIKIRIROA – A Peek Down Below

KIRIKIRIROA – A Peek Down Below

Well after two days of ‘wall2wall’ classic woody porn it was always going to be a big challenge to back up with a run-of-the-mill story, so I thought its Wednesday so must be time for a Work Boat Wednesday story.

Todays woody is the Terry Bailey built 1983, 36′ ex workboat – Kirikiriroa , a woody thats been on my top 10 list ever since I first spotted her at Gulf Harbour marina many years ago. Built from strip plank kauri.

She was originally built for the mussel industry on Great Barrier Island and later used for various fright and cargo transportation. While not currently in survey (on hold), she is still capable of carrying 5 ton of cargo.

AND – down below is a 70hp 4LW Gardner…………….

Kirikiriroa recently popped up on tm , thanks Ian McDonald. I could own her but I’d have to stop churning out WW everyday, I’d be too busy polishing that engine 🙂

Link here to the previous WW story  April 2016 Story https://waitematawoodys.com/2016/04/15/kirikiriroa/

2016 photo ex K Ricketts

07-03-2024 Input ex Russell Ward – Kirikiriroa was ashore at Gulf Harbour for a tidy up when I had Hinemoa’s Boat up for the same several years back.
The sign in the wheelhouse appealed to me somehow.
She was looking a bit tidier back then, but she’s an appealing wee boat for a real man.

HAVE YOU RSVP’ed FOR THE WOODY CRUISE TO RIVERHEAD TAVERN – SATURDAY 16 MARCH

AUCKLAND WOODEN BOAT FESTIVAL – Off The Water Gallery – Part 2

AUCKLAND WOODEN BOAT FESTIVAL – Off The Water Gallery – 70+ Classic Woody Photos

Today we focus on the spectacular collection of smaller woody craft that were displayed in and around the viaduct events centre – to a large % of the shows audience that had some salt in their veins this was a trip down memory lane.

Just so much care and attention has been furnished on these wooden craft. Sadly I suspect that a lot are now in the ‘display’ category. And as we all know with wooden boats you have got to use them or else they deteriorate quickly and then the cost to bring back is just too steep.

The minders / owners of the craft on display were overrun with people wanting to rely their own experiences and memories of the boats. Hopefully the show has ignited some interest in finding the craft that they enjoyed in a past life. The was certainly no shortage of owners looking for new blood to take over their artefact.

Enjoy the gallery and remember you can enlarge the photos if you click on them and the link to the other half of the festival – the classic woodys berthed dockside is below. https://waitematawoodys.com/2024/03/04/77770/

ALBATROSS SPEEDBOATS

ALBATROSS SPEEDBOATS

The annual Lake Rotoiti Classic & Wooden Boat Parade always attracts a good turn out of the Albatross speed boats, but at last weekends parade we had the biggest turnout in one spot in the Southern Hemisphere. Read below for the local (Lake Rotoiti) on the craft – as told by Richard Stevens.

“Campbell Motors (Queen St Auckland) were the NZ agents.
The Beamish-White family at Okataina Lodge had a fleet as “Drive U-Self” hire boats, including a 4-seater with Coventry Climax version of the engine and one of the two seaters had a factory alloy-framed full height 4-pane glass windscreen.
They also had a set of hull jigs and did all their own maintenance on site including re- skinning.
These boats took a hammering and were eventually replaced by outboard-powered craft. Les Warner ran a small hire fleet from his home at Hinehopu. (I recall as a kid seeing one as a crumpled mess after crashing into the jetty at speed.)
There was also a hire fleet on the Rotorua lakefront. These were painted red. One allegedly sank and was never recovered.
There was also a fleet at Queenstown. These may have been the remnants of the Rotorua hire fleet.
The boat in these fleets may be double-ups. I do not know how many boats there actually were in total.
In addition to the Stevensons and ours there were two more on the Lake during the ’60s. One was the Annabel family, the other the McDonalds. (I saw their boat in Auckland a few years ago, complete and painted black) 

These boats are the MG Midget of the water. They don’t have excessive power in their standard format, but they are fast, nimble, well designed and beautifully built with excellent handling. They are simple, cheap to run, easy to maintain and, above all, great fun. 

These boats have held classic status worldwide for many years now and are highly collectible.
It is pleasing to see that they are acknowledged on Rotoiti as part of our boating history

Addition: Alan Clark owned one here at Lake Rotoiti in the 1950’s. 

Addition: Don Wykes and his brother purchased the Rotorua Lakefront business from Judd & Jean Davies in the 70’s.
It had the launch Ngaroto (the Davies had this built in England) that took people out to Mokoia Island and had 3 Albatross hire boats: 2x 2 seaters and 1x 4 seater. They were painted Red. 

He is able to confirm that one of the 2 seaters sank just short of Mokoia Island, when his worker was heading over to mow the grass. They put a buoy over the oil slick, but when they went back to retrieve it someone had moved the buoy. They sent down 2 divers but were never able to locate it, the water was too murky. He doesn’t recall who he sold the others to, but remembers one of their workers bought one and put a bigger motor in it, a 105 he thinks.

Below is a gallery of the Albatross craft that participated in the parade – as always click on photos to enlarge. Also scroll down to view yesterdays WW story – 200+ classic and wooden boat photos from the 2024 Lake Rotoiti Classic & Wooden Boat Parade.

Read more about the boats at the WW link below to a 2015 story on Greg Lees pride and joy. https://waitematawoodys.com/2015/07/30/an-albatross/

Also included is a copy of the NZ Register of Albatross craft- supplied by Alan Thorn

CLASSIC WOODY + TUG/WORK BOAT RACING

My GIRL
MY GIRL
PAIKEA
LUCINDA
WAIKARO
ST CLAIRE
REHIA
JUANITA
MERIHI
JEUNESSE
VANESSA
MEOLA
MERIHI – ST CLAIRE

CLASSIC WOODY + TUG/WORK BOAT RACING

On Monday of Auckland’s  Anniversary Weekend I joined a very small club – boaties that have legally exceeded 20 knots in Auckland’s inner harbour. Probably only Deodar (police launch), Coastguard and the Harbour Master would be in the club. As part of the anniversary day regatta Jason Prew organises an around the buoys race for classic launches. The event has the most entrants of any event on the day. The Harbour Master waves the normal 12 knot speed limit and even provides an escort around the course. 

This year I was invited aboard Jason Prew’s xxxx launch – MY GIRL for the race. The conditions were very average SW18>23 knots , gusting 28 knots, bad enough to keep most of the classic yacht fleet tucked up in her berths for the day.

At the bang of the start gun My Girl took the lead and we never looked back – at the 1st mark we were 58 sec ahead of the next boat (Paikea) and just kept pulling away. Crossed the finish line doing 22.9 knots, that woodys is very fast. The foiling kite surfer that miscalculated our speed probably needed a change of wet suit pants 🙂

My Girl is powered by a Volvo 150hp 4cyl. turbo diesel engine that in another life powered a Queenstown jet boat . Mr Prew has tweaked it ‘a little’ – video of engine at idle and proof of speed 🙂 Note – there is no engine box /cover 🙂 

Results 

Across the line – 1. My Girl, 2. Paikea, 3. Lucinda 

Handicap – 1.Waikaro, 2. Lucinda, 3. St Clair

Entrants – My Girl, Paikea, Lucinda, Rehia, Ngaio, Waikaro, St Clair, Juanita, Meola, Marihi, Vanessa, Jeunesse

TUG/WORK BOAT RACING

The 2nd biggest event in terms of numbers is the highly popular tug/work boat race. Photos below.

Lots of Great Photos Here https://www.facebook.com/photo?fbid=813851850548987&set=pcb.813852363882269

PIRIMANU – Ready To Splash

Photos below November 2023

PIRIMANU – Ready To Splash

We have been following the refit / restoration of the 28’ Salthouse built, A Couldrey designed, 1968 launch – Pirimanui – links below to the last few years stories on WW.

This week the Blair Boats yard advised that the day had come and she would be re-splashing later this week.

Stunning workmanship and hats off to her ’newish’ owner for the level of commitment to the project.

Fingers crossed we get to see some photos of Pirimanu post launching.May 2022 https://waitematawoodys.com/2022/05/16/pirimanu-a-peek-down-below/

Jan 2023 Refresh https://waitematawoodys.com/2023/01/31/pirimanu-gets-a-makeover/

July 2023 >>> Work In Process. https://waitematawoodys.com/2023/07/28/pirimanu-gets-a-birthday/

Update – Pirimanu back in the water, all windows replaced with new teak beading, all new varnish inside and out (14 coats of alwood gloss) inside cabin repainted, new electronics solar and bilge pumps, new gear box and refurbished engine. (Photos and words ex Blair Boats fb.

May 2022

02-01-2025 UPDATE ex NIXON FLYER (a previous owner) now in her new Bay of Islands home

ALMA G II – Restoration Update #2

ex fb

ALMA G II – Restoration Update #2

Last week B.O.I. woody Dean Wright popped into the CMC Design boat shed in Opua and snapped a few photos of the restoration of the 1927 Collings & Bell built launch – Alma G II. The last update was in May, link here to that story https://waitematawoodys.com/2023/05/01/restoration-of-alma-g-ii-begins/

The old girl is getting a serious refit, some diagonal planking being added to hold the old girl together 🙂 anything that gives her another 100 years of life is better than slowly decomposing on a swing mooring up some estuary .

Her Lees Ford has been reconditioned – check out this video of the test bed run.

https://fb.watch/oKseSMfJ5O/

Photos below of Alma G II is her early days earning her keep as one of the most popular big game boats in the Bay of Islands.

Clinker Boat

CLINKER BOAT

The headline above was all the seller just on tme (thanks Ian McDonald) to described this 12’ 1960 built clinker day boat. There is a builders plate which states she was built and engined by – H.N. Burgess & Co., Judges Bay, Parnell, Auckland. 

There is an inboard Yammer diesel to propel her and home is the Waikato.

Not a bad woody to do some gunk-holing over the Christmas / NY holidays with the kids > grandkids. 

Anyone able to tell us more about the ‘boat’ 

SCHOOLHOUSE BAY KAWAU ISLAND – XMAS 1959 – BOATS & OWNERS

SCHOOLHOUSE BAY KAWAU ISLAND – XMAS 1959 – BOATS & OWNERS
In todays photo Ken Ricketts has tagged as may launches as he can confidently ID and provided us with details of who owned the boat at the time of the photo + details on each craft. Hopeful Ken’s memory from 64 years ago is better than mine 😉 Photo by Palmer ex Lew Redwood fb. Engines are listed as on that day, a number had had other preceding engines, some mentioned and most have had other engines since.

  1. MARGARET S – Owner – Alec Stewart. Builder – Collings, & Bell c1919, Engine – Fay & Bowen 40hp petrol
  2. HUKARERE  Owner – Les Ravenhall. Builder– McGeady, ( hull& engine), & L Ravenhall (coamings & interior), 1949,  Engine – Perkins diesel.
  3. ROTUI  Owner – Alec & Linda Walker. Builder – Chris Craft, c1938-39. Engine – Ford V8 petrol        
  4. VARLENE – Owner – H T Morton. Builder – McGeady. Engine – 4 cyl Ailsa Craig diesel.
  5. APACHE – Owner – Harold Parkinson. Builder – home built by original owner in Capt. Springs Rd Te Papapa 1939. Engine – Chrysler Crown petrol.
  6. GAY DAWN – Owner – Ralph Ricketts. Builder (&designer), home built by Bill Waters 1953. Engine – twin 6 cyl Leyland diesels.
  7. MENAI – Owner – Clive Menzies – Builder – Sam Ford 1936/37. Engine – Ford V8 petrol, or perhaps newly fitted Ford 4 cyl diesel, – (original engine when built, 8 cyl Lycoming petrol repl., 1942 by Ford V8 ).

I think I have ID’ed REHAI , the 1938 Colin Wild built launch on the right, last launch – see below. 

03-12-2023 ADDITIONAL INPUT EX KEN RICKETTS – below is additional data ex KR, the accuracy of which is un proven so view as ‘maybe/could be 🙂

Some engine history & installation details of the above where known.

1. MARGARET S original or early days Twigg petrol engine.

2.HUKARERE original Less ( Ford?) marine petrol engine

3.ROTUI – original 

4. VARLENE –  original

5. APACHE – original

6.GAY DAWN original single flathead Studebaker petrol converted truck engine ex ROYAL FALCON painted bottle green.

7. MENAI – original 8 cyl Lycoming petrol engine

LADY MARGARET – original twin Fairbanks Morse diesels. These were side exhausted, out each side, below the bridgedeck, about 6 inches above the waterline, & were left in place for many years blanked off, after the Fodens were installed. 

Her Fodens to me, had a unique exhaust system, with 2 short stacks, one out each side of the cockpit cabintop, & were identical to those installed in Fred Porter’s MARNINE, during the building of her, for him, by Lane Motor Boat Co. 

Ted C. & Fred P. were very close friends, for much of their lives, & shared the same shed for the 2 boats, in Wakatakataka Bay, for a great many years, & both sets of engines were  purchased & installed at the same time. 

Fred P. was the M.D. of Mason & Porter Ltd, ( Masport), the huge engineering organization, & my father, Ralph Ricketts, was manager of the machine shop for about 30 years, & Fred asked my father to design, & for dad & his staff, to manufacture, the 4 exhaust/muffler units, for the 2 boats, which were a wonderful feat of engineering design, & a great success, as he was able to make the exhausts on both boats, almost completely silent, something that with those engines, was almost impossible, as exhaust back pressure, can be a real issue with all 2 cycle engines, which is what Fodens, GM Detroits, Commer TS3s, & others are also. — 

You never heard either of these 2 boats leave the bay, (Compare with original Police launch DEODAR I, which had 2 similar engines, or the navy HDMLs,  you could hear them coming around North Head, from Mansion House Bay Kawau Island, — well almost anyway!!).    

REHIA – still had her original engine, but the installation had a number of unusual special features about it & its installation. It was a Buda 6 cyl flathead, painted grey, with dual ignition (12 spark plugs), with a single 12 position distributor, with double sided rotor, which to me, seems inappropriate, as one benefit of dual ignition system, is the safety factor of having a separate back up, in event of failure of 1 system. She also had a Bendix reverse control system on the manual gearbox, which was operated by a little 6 inch lever, in a dual reverse lever/throttle control, console mounted unit, with an emergency long lever, for a manual linkage control alternative, poking through the floor, by the helm, that could be quickly connected, in event of failure of the Bendix system. I knew the boat & Ryans so very well, & in all the years I knew them, I never knew the Bendix system to fail. The Buda remained for a great many years, during their very long stewardship & was eventually replaced by a 6 cyl Ford Diesel, as I recall, around 1980ish. — KEN R           

When You Sell On-Line You Have Little Control Over Who Buys Your Gear 🙂