Neville Robinson Launches

Harmony
Largo

NEVILLE ROBINSON LAUNCHES

I was recently contacted by Neil Mosley regarding the two photos above of launches built by Neville Robinson – top photo is Harmony and bottom is Largo. Neil commented that he didn’t know much about the man but he was quite well known at some stage. The bigger boat – Harmony is owned by John Gow and spends most of summer moored at the bottom end of Waiheke. The smaller boat is – Largo and owned by Neil and kept at Havelock.

Anyone able to tell us more about the builder – Neville Robinson and what other craft he built.

INPUT FROM PAUL DRAKE“Neville Robinson was foreman mechanic (or similar) with the old Wellington Harbour Board for a very long time. May have served his time there I think. He built at least one other boat apart from LARGO and MELODY. Can’t recall her name but she became a crayfish boat out of Ngawi. He was a meticulous boat builder and his boats were very well engineered. He had a hand in re engineing TUNA (of WW fame) when she was in service with the Wellington Harbour Board (later CentrePort Wellington). He was a quietly spoken, gentlemanly sort of guy. His brother was a tug master on Wellington Harbour for many years, having previously been master of the police launch LADY ELIZABETH 2.”

01-10-2022 INPUT FROM MARIE BREDEN “Hi, I’m Neville Robinson’s daughter, Marie. A friend of Dad’s shared this post with me and so I’ve been searching my memory banks trying to remember all of Dad’s launches.
Paul is correct, Dad worked for Wellington Harbour Board all his working life, he was a motor mechanic but his passion was wood work.
My first memory of Dad’s boat building was when he built a speedboat in our garage.
He named it Cee Bee II and was very successful in his racing days.
He built/altered 6 launches that I can recall. The first boat he built was “Marco Polo”, built in our backyard for some local fishermen. Next was Music, built from scratch, as a family we spent many hours in the boat shed building her. Unfortunately she caught fire and burnt to the waterline. Dad managed to get his hands on some of the burnt timber and made a scale model incorporating the timber into the finished piece. After Music, and I think I’ve got the order correct, was Harmony, Souza, Largo and finally Coda. Jim Carey, previously from Picton, built the hull for Harmony and it was sailed across and finished in Wellington by Dad, and possibly another but I can’t remember sorry. Coda was purchased in Picton, the wheelhouse was removed and rebuilt by Dad, giving it his look and practicality.
Dad passed away in 2018 but he’d be chuffed to think he was still getting the odd mention for his boats.”

YESTERDAYS WOODY QUIZ WINNER – the winner is K Ricketts.

The correct answers were #A Rehutai #B Movaire – as to the identity of #C , that folks remains a mystery 🙂 Had a great number of entries but most unfortunately were way off the mark.

As always I’m indebted to the mind of Nathan Herbert for helping confirm the launch names.

Gil Littler emailed in the observations and photo below

“I believe the photo is 1980, or maybe late-1970s. I say this because the wooden dividing fence between Shipbuilders (from where the photo was taken) and Baileys has already been demolished to make way for what became Orams hardstand. See the photo below taken c.1981 with the old ferries (Toroa and Peregrine) about to be buried in the Z Pier reclamation. The fishing boat Baileys converted to a  pleasure boat is in both photos.”

Looking For A Woody Project

LOOKING FOR A WOODY PROJECT

Recently WW was contacted by Ron Hackett regarding a project that has had an incubation period of 64 years, its good read so I’ll let Ron tell the story. But to give you a heads up Ron is looking for a custodian to take on the project. 

BOUNTY – 34’ sail boat in frame.

“In 1958, a Kauri log was purchased by a young apprentice joiner, named Maurice Fleming. His dream was finally coming true!  He started a notebook, and carefully recorded his purchases. The log, from Waihou valley, near Kaikohe, cost 338 pounds. It was railed from there to Whau Valley, Whangarei, and that cost 24 pounds, 10 shillings. [The mill there was Parkers, and sawing the log cost 56 pounds, six shillings and sixpence, producing 5,268 super feet of first class heart kauri.

Maurice continued to work for his father as a joiner, and set up the vessel at his home, working on it as he could. The designer of the ‘Bounty’, Ken Low, was keen to help as well. Ken was a well known boat builder in Whangarei, and with his brother Ron, owned the Low Bros Boatyard in Ewing Rd. Ken had learned his trade with Bailey & Lowe in Auckland. Ron did mainly the engineering side of the business, and another brother, Norman (known as Nip), was a tug-master in New Plymouth and Auckland.

In Te Puna Inlet, Bay of Islands, there lives a vessel built by Bailey and Lowe, in 1911, ‘Waitemata’, a 55’ pilot launch for the Waitemata Harbour. The construction of the Bounty is the same as that used in Waitemata, so it’s clear that Ken designed the ‘Bounty’ to be built with the same methods he had learned at Bailey and Low – three skins on stringers, two diagonals and one fore and aft, plus a sawn bilge shelf. Ken was well known for designing well-balanced, sea-kindly boats. People who knew him had great respect for his skills in designing and building, and many considered him to be one of the best wooden boat builders this country has seen. Ken also designed the sail plan for the ‘Bounty’, as a fractional rig. He knew what would suit ‘Bounty’ best, and it has been said that the sail plan was ahead of it’s time. Ken was a perfectionist. Maurice was working under Ken’s guidance, who helped when he could. Maurice’s standards were also very high, anyone building their dream boat will understand! He wasn’t happy with the first pouring of the keel, and set about doing it a second time, and it came out perfect. The keel is about four and a half Ton. The backbone and floors are all fastened with bronze bolts, floors being 2” thick. There are two bulkheads, and a number of moulds, with the stringers let into the bulkheads, all being perfectly fair. Breast hook and quarter knees are grown pohutakawa, and the beams are fitted.

Unfortunately, Maurice had a major setback of a personal nature. He seemed to go into a depression which he never really recovered from. He hung up his tools, and all work on the ‘Bounty’ stopped. Eventually, when Maurice was ‘getting on’ and was in a retirement home, it was time to tidy up his affairs.

I bought the vessel and timber about 1997 for $27,000, fully intending to complete her, but I have had too many other projects on.

The ‘Bounty’ is a 34’ vessel, at present in frame. All of the Kauri planking milled in 1958 is available. The fore and aft planks are full length, all planking is machined, and the rabbits are all cut.There are a couple of teak planks for cabin coamings.

I feel this vessel is an important part of our history. Aspiring wooden boat builders, of whom there are currently very few, could be encouraged to study the construction and fine workmanship, and even to work on the vessel. Today it’s a rare thing to smell heart kauri in a steam box. Budding boat builders don’t have many opportunities to work on such a vessel.”

Interested parties to contact Ron at 09 4077265 or email hackettlanding@slingshot.co.nz

Job Opportunity At Auckland Boat Yard

Todays a shout out to anyone that is this person or knows someone that is – looking for a work-life change. If you have a CV you’re probably not who we are looking for 🙂

In no particular order does this sound like you –

• Good practical hands on general skills

• Not afraid to roll your sleeves up and just get the job done

• Sense of humour

• Looking for full time / part time / flexible hours

• Age open – young > old, its all about attitude

We offer – 

• Small passionate team

• Central Auckland location

• Working railway slip – one of few left in Auckland

• Wide variety of work

• Plenty of parking

INTERESTED? In the first instance email cam@slipway.co.nz

Lola – NZ37 + Easterly – Picnic Boat

LOLA – NZ37 + EASTERLY – PICNIC BOAT

Todays story comes to us from retired boat builder Allan Hooper, just back from an extended trip to visit family the USA (Carlsbad just north of San Diego). I’ll let Allan tell the story :-

Prior to leaving I made contact with Morgan Spriggs the current owner of Lola, an NZ37. Lola was built at Jim Young’s NZ Yachts in 1969-70 while I was the foreman. 

I was very keen to see the boat after all these years. Morgan has spent  a lot of time restoring Lola and she looks as good as the date she left the factory apart from a few alterations and replacements. Morgan was excited to meet me and be able to talk about the build of the boat.

The hull construction is 4 skins of 1/4’” Kauri cold moulded with all of the back bone, floors, transom and bulkhead boundarys set in the mould. The hull was sheathed in Epoxy and glass. After the hull was taken off the mould the bulkheads and the interior were put in place and gunwales fitted.

The cabin,  cockpit and decks were built on a separate mould complete with paint work, glazing and hardware. Then in an operation taking only a couple of hours, was lifted and placed on the hull, located over the bulkheads, glued and fastened down.

The techniques developed to build these yachts enabled a NZ37 to be built from start to finish in 4 weeks.

Read and view more on Lola here https://www.latitude38.com/lectronic/lola-55-year-old-kiwi-sloop-finds-home-san-diego/

Morgan‘s father Robert owns a beautiful picnic boat, Easterly (photos below), an ex  Maine lobster boat on which we toured the San Diego bay.

It was used by Denis Connor is a chase boat when he was sailing in the Americas cup. Robert Spriggs has owns the boat for 22 years and it is in as new condition, you could have eaten your lunch of the engine or engine room floor.

The teak cockpit sole is the best laid teak I have ever seen, the timber selected is absolutely perfect, as was the whole boat.

The waterfront at downtown San Diego has a beautiful collection of maritime exhibits including a sailing immigrant ship the “Star of India” which was a regular visitor to New Zealand in the 1800s, once a year it is taken out for a sail.

Further along the waterfront is the USS Midway launched in 1945, she was finally laid up in the 1990s. If you’ve never been on an aircraft carrier it’s well worth a visit. 3.5 acres of 3 inch thick steel makes up the flight deck. It is an interesting harbour to visit and extremely busy as it is alongside the international airport, a military airport, a naval base, several marinas and the city. When you go out on the bay you see it and hear it all.

The Younger Generation – Australian Wooden Boat Festival Film

The Younger Generation

Our friends across the ditch in Tasmania that pull together the Australian Wooden Boat Festival, commission some wonderful short films that provide an insight into the people and vessels that help make the AWBF so special.

We have featured several in the past and todays one is just such a cool, warm, feel good story. We meet Matt and Iefke – a young couple that were drawn together by a shared passion for wooden boats and are now building the boat of their dreams – Tarkine. 

Both Matt and Iefke take us on the journey of how they meet, and express in words the reason why we do what we do and why we love wooden boats.

If today is anything weather wise like yesterday – find that spot x in the house and sit back and enjoy this short film.

To learn more about the upcoming Australian Wooden Boat Festival  – Feb 10>13 2023 – Hobart Waterfront – click here https://www.australianwoodenboatfestival.com.au

Colleen – Launch Day

JAN

Boat builder Alan Craig (Craig Marine) sent in todays’ gallery of photos of the Brin Wilson designed launch – Colleen owned by Bill Stevenson. We see her being launched at Lake Tarawera where she still resides today. Appears that there were a few challenges with the lake level.

Colleen is a near sister ship to the other Stevenson family launch – Jan, refer photos below. Jan is maintained in an as new condition, some credit for this goes to Alan who has repainted and varnished the whole boat at different stages.

Also keen to ID the launch that is helping drag her off.

INPUT ex Hamish MooreI have spoken with Mother on this, Jocelyn Stevenson. Seems you have amended some of the points already. – Typo, Spelling of the family name. ‘Stevenson’

Some info what what Jocelyn can recall;

Colleen was on Lake Rotoiti for a few years prior to been relocated to lake Tarawera, possibly up to 5yrs.

The launching of Colleen shown here could be at Lake Rotoiti and the little Tug boat could well be Sir Williams first boat on Lake Rotoiti, un-confirmed and details of the vessel unknown.

A notable mentioned needs to go to Norm Keane who was a local boat builder that Sir William employed to maintain all the boats, including Jocelyn in Auckland, and his property at Lake Rotoiti and I’d say Colleen while still in the family ownership. If I recall correctly one of your articles in the past may have mentioned Norm Keane.

Last I heard, Colleen has had some work done over the years and some of which was completed by Danny Pearce boatbuilding out of Rotorua. I’ve lost contact with Danny. However we had attempted to head down and cast an eye over Colleen but life just got to busy.

Jan remains in family ownership, by Sir Williams Grand daughter.

It would be fantastic to see some photos and and article on Colleen if you managed to shake down someone who has the knowledge and contact.”

Nereides Makes A Splash

NEREIDES MAKES A SPLASH

In between lock-downs in June 2021 I had cause to do a trip to Tauranga and took up Doug Owens invitation to visit the yard to get a peek at the refit of his 1937 Colin Wild built 55’ yacht – Nereides. The project was well underway and the commitment to best in class and standard of workmanship was already on display.

Yesterday Doug made contact to let me know that Nereides was back in the water and aside from some final interior work the refit was complete.

The gallery of photos above says it all, the pilot house just glows – well done to Doug and son Mohi. We will keep you updated as the final items are ticked off the to-do list. 

Link to 2021 story https://waitematawoodys.com/2021/06/13/nereides-gets-a-facelift/

Photo below at haul out – post refit

The Relaunch of Frances

THE RELAUNCH of FRANCES 

 The 44’, 1906 Arch Logan designed / Logan Brothers built yacht – Frances is one of the lucky classic woody yachts on the Waitemata Harbour, in 2004 she came into the Classic Yacht Charitable Trust fleet and became one of the most regularly sailed yachts in New Zealand. But as we all know wooden boats need regular TCL and Frances returned to the water on Friday after a visit to Wayne Olsen’s yard – Horizon Boats ready for the next 100 years.

Todays’ photos come to us from Angus Rogers, a trustee of CYCT

Link below to the CYCT website where you can read and see more of Frances and the rest of the CYCT fleet.

http://classicyachtcharitabletrust.org.nz/trust_boats.htm?boat_id=6

Haunui Restoration Update #4

Haunui Restoration Update #4

In the interest of keeping you all abreast of the process of the restoration of 1948 Colin Wild built launch – Haunui, last week I paid a visit to master craftsman Paul Tingey. It has been 8 months since my last visit (where does the time go) and Paul and his team have made big advancements on the project. At first glance – lots of glowing timber either on display or peeking out from behind masking tape, but oh boy the focus is on systems, and the team are performing magic in terms of the available space and keeping it out of sight.

Check out the anchor winch, serious bling. And at the other end of the scale – the original ships clock has been retained – we like that.

I wasn’t brave enough to ask about an estimated re-launch date – but I’ll be back well before that happens 🙂

Links To Previous Haunui Restoration Updates Below https://waitematawoodys.com/2020/11/13/haunui-restoration/

https://waitematawoodys.com/2021/04/28/haunui-restoration-update-2-woody-classic-event-dates/

https://waitematawoodys.com/2021/11/24/haunui-restoration-update-3/

Sea Spray > Helena

SEA SPRAY > HELENA

Back in Nov 2020 boat builder Alan Craig (Craig Marine) and I were chatting re a 1956, 17’ clinker run-about named Sea Spray that was on tme and claimed to be built by J Logan. A quick call to Harold Kidd confirmed the provenance and Alan acquired Sea Spray on behalf of a client.

More photos here of the boat as purchased https://waitematawoodys.com/2020/11/14/sea-spray/

By Feb 2021 Alan was well into the restoration / refit – photos here  https://waitematawoodys.com/2021/02/27/jack-logan-would-be-happy/

The yard re-planked the bottom up to water line and rebuilt the whole cabin top and interior. While to some it may appear a lot of effort for a 17′ boat, remember woodys it’s the real deal – a Jack Logan boat.

The project was finished at the end of 2021 and relaunched at Xmas 2021.. Now called Helena, she has been converted to electric, through a steerable pod in place of the rudder. Helena will do a good 10hrs without charging, Alan commented that’s a lot of trips to the Lake Rotoiti hot pools 🙂 I’m told Helena is a quite comfortable boat, even with 4 people aboard.

Her old engine, a 10hp Arona diesel is hopefully going to replace another in a yacht in the far north. 

Raiona – A Peek Down Below

RAIONA – A Peek Down Below

Last week we featured the relaunch of the 48’, 1919, Joe Slattery built launch – Raiona, after a 2 year refit at the Colin Brown / Josh Hawke yard. Today thanks to her owners we get to have a gander down below. Launching story link below – https://waitematawoodys.com/2022/07/09/raiona-relaunch/

The ’new’ decor (can I use the word when describing a classic woody?) really lightens the interior up and the varnished woodwork is magnificent. Well done to everyone that rubbed up against her during the last two years – below is a shot of Raiona leaving the yard, on-route to relaunching.