Category Archives: A Peek Down Below

Ngaru

Posted on by
1

Screen Shot 2017-06-20 at 10.07.03 AM

Screen Shot 2017-06-20 at 10.07.32 AM

NGARU
Ngaru had a wee oops early this year & took on a fair amount of water, you can see in the photos of the engine cover and interior side walls the depth of the water in side the boat. But while there will be damage to her Isuzu 4cyl. engine, gearbox and electrics, I understand she did not ‘go-down’.

She was built by the Lidgard’s in 1947 & is approx. 27′ in length, but in true Lidgard style, she is very spacious for a sub 30′ launch & in my eyes rather pretty.

I have featured Ngaru on ww today as she has been sitting on the hard at Dockland 5, Port Rd, Whangarei since late February & is now up for an on-line auction, starting bid being $2250. Trust me woodys she will be a steal & has the making of a great classic launch.
The Turners auction # is 16374284 & closes this Sunday 25th.

If my old mate Tom is reading ww today, he will onto this auction faster than you can spell Beehive Matches 😉

Wakaiti

Posted on by
8

Screen Shot 2017-06-19 at 3.57.00 pm

Screen Shot 2017-06-19 at 3.56.49 pm

WAKAITI

Wakaiti is a 39’4″, kauri carvel launch built by Dick Lang in 1920, as a commercial tow boat. In today’s world having the same owner for the last 55 years is a very rare thing but all good things come to an end & as the sign on her bow say – Wakaiti is now for sale.

She was re-powered c.2001 with 120hp, 6 cyl. Ford diesel running a 2:1 PRM box and 24×16 3 blade prop. This set up pushes her nicely along at 8 > 10 knots, with a top speed of 12 knots. Her beam is 9’10” & draft is 5’10”. (the interior photos have had the benefit of what they call the real estate salesman’s best friend  – the wide angle lens 🙂  ) Thanks to Ian McDonald for the trademe heads up.

So woodys, what do we know about her past?

Harold Kidd Input (lots more in the Comments Section)

WAKAITI = “little ship” in Maori. Dick Lang built this 36 footer at his yard in St. Mary’s Bay in 1922. She was launched on 2nd September of that year for Parry Bros of the Mahurangi to carry cream on the river. By 1928 the Parrys were using her as a tow boat on the Waitemata. In 1936 they sold her to R.G. Brain of Coromandel. Eventually she ended up in the ownership of Ernie Seagar, marine engineer of wide repute in Auckland. Ernie’s not well and is obviously selling his beloved launch.
I was in the 5th Form at Takapuna Grammar with Ernie Seagar. He had been in that Form for 3 years, unable to get School Certificate because of distractions such as being the Captain of the First 15, Head Prefect (in the 5th Form!!) and an outstanding yachtsman and general sportsman.
Later he went on to get his Marine Engineer’s tickets at sea and then ran his engineering business at Sulphur Beach alongside Dave Jackson. An amazing character.

 

13-09-2022 UPDATE: Back on trademe, current owner bought in Jan 2022, repowered with a Ford 130hp, 6 cyl diesel – BUT since this 2017 story the launch has been seriously negected and would be best described as a project, a large project.

AOMA – 30′ Halvorsen ‘Special’

Posted on by
5

IMG_1029

IMG_1028

IMG_1033

AOMA – 30′ Halvorsen ‘Special’

Aoma was launched in May 1963 & was build # 1185 for the Halvorsen company, in fact the last special built.
Aoma is in fact unlike most of these Australian woodys in that her hull was splined & the helm was on the starboard side rather than port.

The photos above of Aoma are ex Peter Arnold & show case the classic Halvorsen design, you either love or dislike these Australian classics, me ? I love them. They have a very strong class association & most are presented in a similar standard to Aoma. Most do not see much blue water, to be found cruising the inner & protected upper harbours. I believe the A-Cup man Iain Murray owns the largest Halvorsen built.

They represent good value for money on the market – but I’m not sure on the Aussie laws re exporting them ?

UPDATE: The photo below is of Iain Murray’s 60′ Halvorsen – Tooronga. Her designer Carl Halvorsen spec exported Tooronga to the States in 1949. The story goes that Carl was lunching in the Newport Yacht Club & a fellow diner saw Tooronga tied up outside – he immediately called a club steward & sent a blank cheque across the room to Carl on a silver tray. Carl returned the keys on the same tray – sale made 🙂
Ian Murray bought Tooronga in 1992 & returned her to Australian waters & commissioned a magnificent restoration.
You can read, see more on the boats here http://www.halvorsenclub.com.au/

Screen Shot 2017-06-20 at 11.06.19 AM

 

Cleona Mae

Posted on by
4

CLEONA MAE - 1

CLEONA MAE -6

CLEONA MAE -5

CLEONA MAE -2

CLEONA MAE

Cleona Mae as built by Brin Wilson in 1962 & is powered by a 6 cyl Ford diesel. In the above (hauled out) photos we see her in Feb/March 2017 at the Sandspit hard stand, where she was getting some TLC. Home of Cleona Mae these days is Scott’s Landing, Mahurangi. Below, her previous owner, Nigel Drake of Tauranga has documented some of her past. Thanks to Ken Ricketts for sending this to me. Special thanks to Nigel for sharing the story. (photos ex Nigel Drake, Ken Ricketts & Brian Worthington). On her launch day she had a wee opps, refer photos below.

“Cleona Mae, was built by Brin Wilson in 1962. Launching looks as though it was in November, as that is the date which is on the original photos of her, having fallen off the trailer on that day.

She was built for Bert Follas, a well known builder in Takapuna. She is named after his daughters, Cleo and Shona, and his first wife Mae. The story as told to me by one of his grandsons, was that Bert knew Brin Wilson quite well, and when talking with Brin one day, during a bit of a slow period for Brin, they agreed that Brin would build Bert a 34 footer. Bert apparently told his wife of the agreement that night!

Previous to Cleona Mae, Bert owned the smaller Cleona, which I understand, is still in Milford marina.

Cleona Mae lived on a mooring in Westhaven, and Bert used to row out from the dinghy storage area, though he did have some trouble climbing over the transom, as he was on crutches from age of about 50. He used to take business associates from Takapuna out to the Barrier. Large bronze bollards are on each side of the transom as he was involved with the Coastguard and used to tow boats home when required.

In 1983 Bert sold the boat to his solicitor, Ian Armstrong. Ian appears to have owned her for only 1 year, as she was purchased by Bill McNutt of Tauranga in 1984. I have a feeling the flying bridge was added in 1983.

I purchased Cleona Mae in 1999. I added the mast in 2003. It had been a flag pole, one of many, on top of the Wellington Harbour Board building. They were removing them and selling them off at the time. I did many trips up the coast from Tauranga to the Mercury Islands, Great barrier and into Auckland.

She is a great little boat.

I sold her to Aubrey Montague, her current owner, in Nov 2012 having purchased the 40 foot Woolley “Freelance” in 2011.

I did the delivery trip to Gulf Harbour with Aubrey.”

Classic Yacht Racing – Waitangi

Posted on by
3

Classic Yacht Racing – Sailing Sunday

Sorry for the late post today, been out & about watching the A-Cup, 1-0 is a great start, even better is the fact we are actually (& mentally) 2 – Zip up on Oracle 🙂

Seems only fitting that we have some classic yacht racing today. The u-tube movie below is by Roger Mills & was bought to my attention on the WoodenBoat Magazine USA forum by kiwi classic yachtie Patrick Xavier (that’s not his real name, but I wont ‘out’ him here).

The clip shows the 1894 gaffer Waitangi preparing for a race in the winter series – 2016. Enjoy 🙂

 

Heading Across The Ditch In November?

The Jervis Bay Maritime Museum ( JBMM), in NSW, are holding a Classic Wooden Model Boat Festival on the weekend of November 10/11/12. Based on the info that I was sent by woody boat builder Colin Brown, whose brother Stan is on the Festival committee it’s a cracker weekend. See below details

On Friday evening (10th) there will be a casual “ Meet and Greet” in the museum.  There should be chance to mingle, swap yarns & partake of refreshments.

The museum is land-locked but has large grassed areas surrounding the main building with a large shallow pond.

The northern area overlooks the Currambene Creek which flows into Jervis Bay at the coastal village of Huskisson which is only a short walk away.

We plan to have Trade Stalls and Hard Stand boat exhibits.

So woodys if your in Australia & looking for something to do put this event into their diaries. For more details you can contact Stan at su.stan@bigpond.com

Check out the Museum here www.jervisbaymaritimemuseum.asn.au

 

 

Voyageur – A Very Big Woody

Posted on by
8

Screen Shot 2017-06-14 at 8.31.08 PM

Screen Shot 2017-06-14 at 8.44.21 PM

Voyageur – A Very Big Woody

Voyageur was built in 1953 to a Chris Craft design, she measures 60′ with a beam of 14’5″ & draft of 5’6″ – so is a rather large old girl.
She is D/D kauri that has been glassed over, with a teak interior. A recent refurbishment included new Volvo engines. For sale at $750K, a lot of money for a 60′ woody but its a lot of boat & being set up for game fishing & in MOSS survey, I assume its a business venture as well.

Any one able to advise the builder?
Thanks to Ian McDonald for the trademe heads up.

UPDATE

Ken Ricketts has advised she was built in 1958 by T K Atkinson at Browns Bay, at 40 feet, for Takapuna Ford dealer Jack Lewis, (Lewis Motors), who extended her in 1965 to 48 feet, the work once again being done by T K Atkinson. —
Lewis took & a friend & me to Browns Bay one day, to see the extension in progress. He was considering a 3rd centre engine for her at that time.
She has obviously been extended again.
What a shame all her lovely exterior varnish has gone — it was such a special part of her beauty & character.
View photos from her early days as a 40 footer here https://waitematawoodys.com/2015/03/18/voyaguer/

04-03-2026 UPDATE ex DEAN WRIGHT – photo below of Voyageur, in Whangaruru

18′ Clinker Day Boat Restoration Project

Posted on by
4

Screen Shot 2017-06-05 at 11.33.29 PM

Screen Shot 2017-06-05 at 11.41.48 PM

18′ Clinker Day Boat Restoration Project
Today’s story is a pictorial of the restoration at the Peter & Angela Murton – Murton’s Timbercrafts yard in Richmond, Nelson of an 18′ clinker day boat. It’s claimed to be a Colin Wild design/build but could equally be a Seacraft.
Peter has done a wonderful job of sympathetically rebuilding the boat, equal with her vintage. Right down to the Via 7hp two stroke engine.

Hats off to her Christchurch owner, funding a restoration of this scale on a 18′ craft is a big call & needs deep pockets.
No-doubt we will see her at next years Lake Rotoiti (Sth Island) wood boat festival.
You can view more of Peters work here http://www.murtons.co.nz/

Clinker Day Boat Project

Posted on by
2

CLINKER DAY BOAT PROJECT

We do not know the original design & build date for the above 4.2m clinker day-boat style launch but it has had nearly all her timbers replaced during rebuild which included new deck, coaming, transom, keel, oak ribs, stringers, bulkhead, topsides of planking, and beltings. So woodys almost a new boat. There are some interesting woodwork skills on show 🙂
In the interests of reduced maintenance she has been fiberglassed, hopefully to eliminate shrinking and leaking of seams. The trailer looks all good but just needs WOF / Rego.

There is a 10hp Bukh diesel in place that needs the installation finished off and some seating fitted. With trademe bidding starting at its $5k its got lake boat project written all over it.

 

 

Wee Darling

Posted on by
2

WEE DARLING
Wee Darling is a 26′ kauri planked 1961 classic launch. Powered by a 35hp diesel ehgine. She underwent a ‘total’ refurbishment 2 yeras ago. Home port is Motueka, Nelson. That woodys is all we know about her other than the normal trademe info. Thanks to Ian McDonald for the trademe heads up.

Anyone able to supply more info on her & her past?

The Building & Launching of White Cloud + A Peep Inside 1A Summer Street

Posted on by
7

WHITE CLOUD AT PENROSE - EX PAM MARE - 1

The Building & Launching of White Cloud + A Peep Inside 1A Summer Street

1A Summer St, Ponsonby was an unlikely location for boatbuilding, particularly for large launches. The building was built on to the rear of a retail shop, on the corner of Ponsonby Rd & Summer St., Auckland. Summer St was & still is an incredibly narrow side street, dating back to the late 1800’s.
To date on ww we have never seen good photos of the interior of the yard/shed, now thanks to the generosity of Pam Mare, we have access to the above photos. Pam is  part of the Buckby family, that had White Cloud built at the yard by Ben Hipkins, to a McGeady design. Ben bought the Supreme Craft, off Mac Mcgeady. Other craftsman at the yard were boat builder Garry Wheeler & Tracey Nelson, a marine & refrigeration engineer, who did the vast majority of the engine & machinery installations, in the Supreme Craft vessels, — along with looking after all the Ponui Island mechanical work, from  all the farm tractors, power generators, to George Chamberlain’s Lane built, tram topper, Falcon.

Such was the shortage of space at the building, that every boat that emerged, meant ,the picket fence of the house opposite in Summer St, to have to be removed & later replaced, to facilitate the exit from the building on to the transporter.

White Cloud left the shed in June 1965, to go to Fodenway Motors, Penrose, for engine installation & finishing. The photos below show her leaving the shed & later, on route to launching. Sorry for the poor photo quality, stills photos taken from old ‘home’ movie footage,  recorded by Len Buckby or his wife & made available to us by his daughter Pam Mare.
Special thanks to Ken Ricketts for pulling the individual pieces together.

WHITE CLOUD -- LAUNCHING DAY -1965 - 6