SEAMIST – A Peek Down Below

SEAMIST – A Peek Down Below

Todays woody story features the 33’8” Claude Smith 1966 built launch – SEAMIST. She made a brief appearance on tme a little while ago and based on her looks and presentation I’m sure she sold quickly.

Built of double skinned kauri, sadly her hull has been splined and both above & below water the timber has been f/glassed.

Powered by a 70hp Fordson 4 cyl. diesel engine SEAMIST she cruises at  7 knots.

As seen in the photos she is very well kitted out.

Can anyone tell us more about her past life.

CLASSIC WOODEN LAUNCH – AVALON RESTORATION UPDATE #1

Launch Day 1954
2021

CLASSIC WOODEN LAUNCH – AVALON RESTORATION UPDATE #1

Back in Feb 2020 one of the WW spies spotted the launch – AVALON ‘parked’ on a lawn in Auckland’s north shore. From the subsequent WW story , linked below, we learnt that the 24’ AVALON was built be Sam Ford and launched in 1954 . AVALON has enjoyed one extended family ownership since new and at the time Tobias Forsyth (MV Callisto) was planning to give the launch a birthday. The top photo (launch day) above was sent in by Cameron Pollard Feb 2020 https://waitematawoodys.com/2020/02/17/mystery-sam-ford-launch/

Fast forward to Nov 2021 and Tobias gave us an update, link below, which included a wonderful collection of historical AVALON photos over the years. He also shared a design sketch of the thinking re the ’new’ look (4th photo above). Nov 2021 https://waitematawoodys.com/2021/11/29/resurrection-of-avalon/

Then last Friday the gallery of work-in-progress photos above landed in the WW inbox. The Forsyth family, including father Ian (MV MEOLA) are very talented chaps as you will see from the work underway.
Tobias commented that it had “been a busy few weeks with some big milestones but plenty of work has gone on since she was installed outside my kitchen window. Getting onto the shiny bits new with new solid Honduran mahogany cabin sides with a slight more sleek take on Avalons original design, engine is in and things are progressing well. Hopefully she can be in the water for summer 2026 in a rough and ready mode.”

As always – click on photos to enlarge 😉

UPDATE ex TOBIAS FORSYTH – AVALON will be re-powered  new Mercruiser 3.0 petrol engine with new hydraulic transmission. 

The old engine (Morris Naviigator) was too far gone and finding parts made it uneconomical. Its still sitting in my garage if someone looking for parts as there’s all sorts there and spares too including the Paragon box with 2:1 reduction. Would make a good static museum piece as it’s quite neat with the hand crank start etc. it seems too good to take to the scrap dealers. 

The new engine is half the weight, 8 x more HP , narrower and shorter, so gives me much more internal room. And it should be nice and quiet inside the cabin when running. Plus she may boogie a little faster now.

I intend to tow her around the country and visit a lot of the lakes and hard to reach spots right down south in the future so she will be a full trailer boat now. Plus the anniversary races etc.

Tobias also commented that he is the second owner of Avalon, his grandparents had her hull and cabin sides built by Sam Ford in early 50’s and grandfather transported her home on the truck and finished her outside their kitchen window over a period of about 6 months with what ever he could find that would do the job, tounge and groove and canvas cabin tops. They then kept her at their wharf in Helliers Creek that Avalon help build as she towed the logs to Riverhead to be pressure treated and milled before towing/carrying them back rather overloaded at times.  Tobias’s Grandma used her regularly well into her 80’s before she ended up on the lawn . Tobias’s  mum Carol is the baby in Granddads arms on launching day. 

AVALON is a genuine one family owned vessel since new. 

LYNNRAE – CLASSIC WOODEN EX WORKBOAT 

LYNNRAE – CLASSIC WOODEN EX WORKBOAT 

The 42’ ex workboat LYNNRAE has been popping up on and off the normal 4sale sites for a while, I’m assuming still looking for a new owner.

Her owner has done a lot of work in the conversation to pleasure use, but still very much a blank canvas. Perfect for someone with the basic skills to compete the work.

All of the expensive systems, nice to haves, have been installed so posting interior fit out / cosmetics.

Built in 1968, possibly in Naper, wooden hull, powered by a 200hp Detroit 8v71 diesel engine that gives her a cruising speed of 8 knots.

Her stern says Houhora, so home must be in the Far North. The listing (thanks Ian McDonald) mentions she worked (fishing) the Three Kings Islands and northern waters.

Can anyone tell us more about her past life.

CLASSIC KAURI LAUNCH. – PUTIKI

CLASSIC KAURI LAUNCH. – PUTIKI

Todays classic wooden launch has  recently popped up on tme (thanks Ian McDonald). Terrible listing, eg so few details but putting that aside with an $8k asking price, PUTIKI could be a great project for the winter. Some boatyards would charge you more than $8k to make that butterfly hatch.

What we know is she is 32’ in length, kauri planked (but sadly f/gased – but maybe thats keeping her a float) and powered by a 80hp 4 cyl. Ford Lees diesel engine. 

Home is currently Kerikeri.

The boat and name is unknown to WW so keen to learn more on her past .

06-05-2025 INPUT ex STEV LITTIN – Putiki was owned by my father Albert Littin while in Port Albert from about 2003 till 2010 and then moved to One Tree Point, Whangarei till sold about 5 years ago to Totara North. Current engine was rebuilt and fitted by Dad to replace the engine that broke a crankshaft and self destructed while fishing on the Kaipara.

Built 1907-10 we believe in Mangawhai. Dad has a picture from I think the 1940’s-50’s taken on the Mahurangi River.

WOODEN LAUNCH – RANGATIRA + I BOUGHT A YACHT

WOODEN LAUNCH – RANGATIRA + I BOUGHT A YACHT

The wooden launch RANGATIRA recently popped up on tme (thanks Ian McDonald) and reading the listing it sounds like an abandoned vessel forced sale.

34’, kauri hull, Perkins 6 cyl. engine (not working) – that is about all we know other than a $1 reserve. 

Possibly beyond a restoration but surely someone needs some kauri for a project……

I BOUGHT A YACHT

Well a small one, very small eg vintage pond yacht. Another one for the collection. Very good condition.

On the centre cockpit there is a cover (to keep water out – this one actually sails) on the top are the letters ‘RMYC 1923” and two burgees / pennants – refer photo below. My initial thought was ‘Royal Melbourne Yacht Club’ but can’t find any reference to that other than a Royal Melbourne Yacht Squadron and they have no reference on their website to those two ‘flags’. Anyone ablate help ID the graphics / yacht.

AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Five

AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Five
Todays WW story follows on from earlier stories – link below to Part One, Two, Three and Four 
As per pervious stories in the series the content has been pulled together by Ken Ricketts and ‘polished’ by Patrica and Ken’s daughter Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back in commenting.

PART ONE – https://waitematawoodys.com/2025/04/04/an-insight-into-nzs-unique-marine-engines-part-one/

PART TWO – https://waitematawoodys.com/2025/04/12/an-insight-into-nzs-unique-marine-engines-part-two/

PART THREE – https://waitematawoodys.com/2025/04/18/an-insight-into-nzs-unique-marine-engines-part-three/

PART FOUR – https://waitematawoodys.com/2025/04/26/an-insight-into-nzs-unique-marine-engines-part-four/

LINDA, AT CHRISTMAS 1948, TAKEN IN SCHOOLHOUSE BAY, KAWAU ISLAND, JUST AFTER HER LOEW-KNIGHT PETROL ENGINE HAD BEEN REPLACED, WITH HER GM DETROIT 165HP MARINE DIESEL.

COQUETTE, POST HER LOEW KNIGHT-ERA

I know of only two boats that have these very rare versions of the Knight sleeve valve engine. One is the 1928 Colin Wild-built LINDA, which was bought by Roy Swales just after WWII with her original Loew-Knight 6-cylinder petrol engine. I saw it running, and it was incredibly smooth, quiet, and looked very tiny in LINDA’s huge engine room. It was painted silver and had the name “Loew-Knight” in a scroll, cast into the inspection plates on the crankcase. 

Roy W. replaced it in 1947 with a 6/71 GM Detroit 165 HP diesel engine. 

The other boat was the delightful Logan-designed and built COQUETTE, with her sedan top, which was added many years later by Arnold Couldry. He kept her delightful lines perfectly with this addition. She had a 4-cylinder version of the Loew-Knight sleeve valve engine, also painted silver.  I tend to think this may have been her second engine because of her age, having been built in the early 1990s.

FODEN 2 CYCLE DIESEL ENGINES.

FODEN 12 CYLINDER 2 STROKE, MARINE DIESEL 256HP ENGINE – 2 X 6 CYL ENGINES SIDE BY SIDE ON ONE CRANKCASE IN 1 ENGINE  

FODEN 6 CYL 2 STROKE DIESEL ENGINE

FODEN 6 CYL 163HP, MARINE DIESEL ENGINE

ORIGINAL FODEN ENGINES IN THE HDML MANGA, AS SOLD BY THE NAVY

KUPARU NOW OWNED BY SCOTT PARRY BELIEVED TO STILL HAVE 2 FODEN DIESELS

 HMNZS KUPARU 

HMNZS MANGA

DEODAR IN PRIVATE OWNERSHIP AFTER HER DAYS AS THE POLICE LAUNCH

LADY MARGARET WITH HER 2 X 6 CYL FODEN DIESELS – (Built by Dick Lang)

MARNINE WITH HER 2 X 6 CYL 163HP FODEN MARINE DIESELS IN MARCH 1963

WHITE CLOUD LAUNCHING DAY WITH HER 4 CYL., HOME MARINISED FODEN DIESEL

There are only three pleasure launches that I know of that have these engines, and there are two with 6-cylinder versions. The LADY MARGARET (built by DICK LANG) replaced her original two Fairbanks Morse Diesels; the MARNINE, which had two of them from when she was built, had the same specifications and was installed at the same time as the LADY MARGARET. The third boat was the WHITE CLOUD, which had a 4-cylinder home-marinized version, fitted by or for, the managing director of Fodenway Motors, Penrose. They were the New Zealand agents for Foden engines at that time and had her built and baselined a generator set to convert the 4-cylinder Foden for marine use in his new boat. This installation took place at their Gt. South Rd premises after being built at 1A Summer St, Ponsonby, by McGeady (Supreme Craft).

In addition to these boats, all RNZN-owned HDMLs and the first of the Police Launches named DEODAR, (DEODAR I), had two of them installed. All were originally 6-cylinder versions; however, but with the HDMLs., some engines were later replaced with 12-cylinder versions in some boats, which were, in effect, two 6-cylinder engines side by side in one crankcase. These had one drive shaft and two crankshafts connected by a system of gearing. At least one twin x 6-cylinder installation is believed to still be in a boat & still surviving today. It is in the massively refurbished, now privately owned KUPARU, primarily located in Whangarei.

Foden engine manufacturing and parts supply were sold to Rolls Royce in the late 1970s, and production ceased when they took over the Foden manufacturing rights.

RAIRA – A Peek Down Below – SOLD

RAIRA – A Peek Down Below – SOLD

Todays classic wooden launch is the 1915 38’ McLeod Brothers Devonport built launch – RAIRA. RAIRA was built to a Collings & Bell design and like most woodys has had a few enhancements (good & bad) over the last 110 years. As she floats today RAIRA is a very handsome craft, but she has a big secret – her interior. Step below deck and you’ll be wowed by her fit out, as seen in the above gallery of photos.

Forward motion is via a Ford Lees 6cyl. 120hp diesel engine that was rebuilt in 2011. At the same time work included replacement of ribs, keel bolts, bulkheads, decks and full refastening and caulking.
Her systems and electrics are as expected for a vessel capable of extended coastal cruising + she sports a diesel cabin heater, so there’s the opportunity for RAIRA to be very comfortable live aboard.

If you haven’t clicked yet – yes RAIRA is for sale and at an asking price of $30k she is very good value for money and her next owner will get a very affordable entry to the classic wooden boating movement.  The asking price is a sad reflection of the boating (wood/glass) market at present. Believe me it will never be cheaper to by your dream boat.

Interested buyers initially to contact owner – Thomas via email at  gosi120@hotmail.com

(note: game poles in top photo, now removed)

CLASSIC WOODEN LAUNCH – TAURIMA – A Peek Down Below

CLASSIC WOODEN LAUNCH – TAURIMA – A Peek Down Below

Todays woody is the 1961 classic launch – TAURIMA. Built from kauri with double diagonal planks. She measures 36’4” in length, with a beam of 10’6” and draws 3’7”. Forward motion is via a 110hp Lees Marine Ford diesel engine that gives her a cruising speed of 6>7 knots. In recent years TAURIMA has enjoyed a ‘rolling restoration’ and appears to be presented in very good condition.

TAURIMA made an appearance on WW back Feb 2017 link below  https://waitematawoodys.com/2017/02/13/24919/ Lots of chat in the comments section on designer / builder – the thinking is possibly based on a Billy Rogers design and a home build.
The interior is a tad cluttered but this is a reflection of her current use eg live-a-board, a big black sack and a few hours would see her looking smarter 🙂

NOTE: the first 5 photos are dated c.1961

AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Three

AN INSIGHT INTO NZ’S UNIQUE MARINE ENGINES – Part Three

Todays WW story follows on from earlier stories – link below to Part One and Two 
As per pervious stories in the series the content has been pulled together by Ken Ricketts and ‘polished’ byPatrica and Ken’s daughter Corinne Pettersen. As always we have endeavoured to be as factual as possible but there will always by matters others will either know more about or be able to correct errors – so woodys do not hold back on commenting.

PART ONE – https://waitematawoodys.com/2025/04/04/an-insight-into-nzs-unique-marine-engines-part-one/

PART TWO https://waitematawoodys.com/2025/04/12/an-insight-into-nzs-unique-marine-engines-part-two/

ROLLS ROYCE MARINE DIESEL ENGINES

ROLLS ROYCE 275 HP MARINE DIESEL ENGINE

ONE OF THE 2 ROLLS ROYCES THE ORIGINAL ENGINES IN OHORERE

KUDU WITH HER 137 HP ROLLS ROYCE ENGINES IN 1966

OHORERE WHEN NEW, WITH HER 2 X ROLLS ROYCE 6CYL. 275 HP DIESEL ENGINES

OHORERE AS AT 2025 WITH HER 2 X 770 HP MTU MARINISED MERCEDES BENZ DIESELS

MANAIA, WITH HER 2 X 6 CYL. 275 HP ROLLS ROYCE ENGINES

MANAIA INSTRUMENT PANEL

These are, as one would expect, a brand of engine that is quite rare, resulting from the cost of the engines to buy and the cost, equally, of parts for all maintenance. Also, while Rolls Royce has the name synonymous with perfection in all respects, it is my view that, in fact, Gardner engines are far superior in every respect, including noise, smooth running, longevity, maintenance necessity, and costs thereof. However, there are a few that are in the boats of today and yesterday. I personally know only three.

There is the KUDU, a large launch that, at one time, in mid to late 1966 to perhaps somewhere around the 1980s, belonged to the late Harry Julian. She is 63 feet long and powered by 2 x 137hp Rolls Royce 6-cylinder diesel engines. She was designed and built under Lloyd’s supervision in the UK in 1964 and sailed out to NZ as the end of a 20,000 km journey. However, the last time I saw her was on a visit to the Gold Coast in Australia, anchored in the middle of the center of Sanctuary Cove Marina.

Another of the RR-powered boats is the OHORERE, built by Percy Vos in Auckland for the government of the day to be a high-speed fisheries patrol craft, and designed by Thornycroft in the UK. However, she never reached anything close to her anticipated speed projections as required in the order from the government to the designers and builders. Large sums of money were spent collectively by the designers, Rolls Royce, and the builders to give her better performance, but they failed miserably, and she was ultimately sold to private ownership, where she has been used for many years now for fishing charters in Tauranga. As of now, Rolls Royce’s were replaced about two years ago with 2 x 770hp MTU marinized Mercedes Benz diesels and is capable of around 30 knots.

There is one more pleasure craft, an ex-Whangarei pilot boat and that is the MANAIA, which has had from new, 2 x Rolls Royce 8-cylinder inline 16-litre diesels. 

UNIVERSAL BLUE JACKET 6 FLAT HEAD PETROL ENGINES.

THE UNIVERSAL RANGE OF 4 & 6 CYL BLUE JACKET RANGE OF MARINE ENGINES

OTAZEL WITH HER UNIVERSAL BLUE JACKET 6 PETROL MARINE ENGINE. MANSION HOUSE BAY, KAWAU ISLAND c.1951

I am aware of one of these in New Zealand, which was in the OTAZEL, owned by Arch Tucket, in the late 1940s to the 1960s. He was the head of the patrol craft section for T.E.A.L. at that time in Mechanics Bay, and he fitted it to her on the hardstand at Okahu Bay in the winter of 1950.

G.M. ALLISON 1450HP, HOME MARINE CONVERTED, V12 AIRCRAFT PETROL ENGINE.

GM ALLISON V12 AIRCAFT ENGINE

REDHEAD, IN THE SOUTHWARD TRUST VEHICLE  MUSEUM IN PARAPARAUMU, AS SHE WAS LIFTED FROM THE SEABED IN WELLINGTON HARBOUR, AFTER HER  PROPELLER LOSING A BLADE, WHILST RACING & SINKING AS A RESULT.  

REDHEAD RACING A FLYNG BOAT ON WELLINGTON HARBOUR

The only boat I’m aware of that had one of these was Sir Len Southard’s champion racing boat, REDHEAD, which won, at one time or another, most of the cups and awards, as well as a huge number of races in her time. She was a real champion, designed, built, and raced by the late Sir Len Southward of Wellington, a brilliant engineer and philanthropist. John Bullivant tells has advised there was a second high-speed hydroplane racing boat built with a marine-converted V12 GM Allison petrol engine in the same era.

STERLING MARINE PETROL ENGINES

STERLING 6 CYL 1920 MARINE PETROL ENGINE PROBABLY SIMILAR TO THAT 

IN LADY STIRLING

STERLING 115 HP U.S. NAVY WWII FLAT HAD PETROL ENGINE

KERMATH 1928  225 HP SEA WOLF ENGINE IDENTICAL TO THAT IN THE TASMAN IN 1947

LADY STERLING IN QUEESNTOWN

TASMAN IN 1948 IN SCHOOLHOUSE BAY KAWAU ISLAND  

STERLING BUILT IN 1926 BY ERNIE LANE IN PICTON

LADY STERLING

The 52-foot, 105-year-old Bailey & Lowe-built ocean-going yacht, built in 1920 is named LADY STERLING. This yacht had one of these engines originally, and there were other boats that had them in the earlyish 1900s. 

LADY STERLING has, in recent times, been in the Queenstown area, but she has traveled many thousands of sea miles, with numerous crossings of the Pacific Ocean in her long life. 

Around the end of WWII, she belonged to Stan Waters. She passed shortly after to Lloyd McIvor, a dentist, who sailed her several times a year to Fiji and other Pacific islands to attend to the islanders’ dental issues.

TASMAN WITH A STERLING 6CYL DUAL IGNITION 115HP WWII U.S. NAVY PETROL ENGINE.

A reference in part 1 of this series was made in the comments section by Denis O’Callahan, related to the TASMAN having had a WWII ex-US Navy 6-cylinder flathead Sterling petrol engine at some stage, pre-1975. I have researched this engine and found the following information and images related to it, which I am confident may well be the engine he was referring to.

A quote from Tom Ball in 2016: “I have acquired this engine recently. It is a six-cylinder marine engine with dual ignition. It is 115 HP with a water-cooled exhaust. These Sterling petrol engines were made in Buffalo, New York. The engine supposedly was in a naval ship of some sort and may have come from the naval yard there.” – unquote

As I also said in part 1, I was aboard TASMAN, Christmas 1947 with my father one day & owner, Jack Brooke, lifted the bridgedeck floor & showed us her huge bottle green 225 hp overhead valve Kermath Sea Wolf  petrol engine, identical to that in the above image.

I could see by its size & overall concept, it was a fairly old engine, & perhaps the original, & in the circumstances, I have taken what to me, is a logical view, that this engine was probably replaced around 1960ish by the Sterling, due to old age , &/or perhaps maintenance issues, as well as huge quantities of petrol it must have consumed. Also, it was usually pushed at high speed most of the time by Jack B who was a speed fiend, when it came to his boat, which must have given the engine a hard life.  

19-04-2025 INPUT ex RUSSELL WARD“I have a little input into Tasman when she had the Stirling engine in the early -mid ’60s. We used to describe it as a “Sterling Dolphin” in the day. My mother had a business connection with her then owner Dr Jim Sprott and I had the chance to see over Tasman and especially to view her engine. It was a four cylinder T head type engine -two blocks of two and quite tall. Certainly painted green with lots of brass -It ran delightfully smoothly and the owner averred that it was not too thirsty if throttled back. His suggestion was that the Americans installed the engine during the war to get more speed out of her. It certainly was a very old vintage- looking engine and had none of the looks of the more modern engines.

Dr Sprott later decided to replace it because of the petrol it used and maintenance. It was offered to MoTat who refused and my father wouldn’t allow me to have it and the word was that it was scrapped. RIP.”

26-04-2025 INPUT ex DENIS O’CALLAHAN – below further information regarding the Sterling engine in the launch – TASMAN

In 1970, TASMAN was purchased from Dr.Jim Sprott by my friend Allan Tyler and his dad Eric.

She had a Sterling 6 cylinder petrol engine with dual ignition and we were told that the original engine may have been a Kermath.

We had many adventures with this engine. One time at Tryphena she would not start and we found the Bendix Spring was broken. To our relief we found several spare springs in the locker so it must have happened before.

The Sterling was replaced in 1976 with a Lees Marine 6 cylinder Ford diesel. New stainless steel fuel tanks amidships replaced the old copper tanks under the aft deck which became the water tanks. The old Sterling engine went to scrap but we retained the name plates which were passed on to the new owner of TASMAN, Stephen Cashmore.

Photographs of these plates are below and the following is my interpretation:

Silver badge “Sterling”. THE ENGINE OF REFINEMENT FOR THE FINEST BOATS THAT FLOAT.

Small Plate. US NAVY. BU. ENG. NO. (Bureau of Engines Number) –  11725

Large Plate. STERLING ENGINE CO.

                        BUFFALO NY USA

            BUILDERS OF MARINE ENGINES

                       SERIAL NUMBER

                            US L61678

           ROTATION AT FLYWHEEL C.C. (Counter clockwise)

         C.W. HAND SCREW PROPELLER

                 HORSE POWER 220

                RPM MAXIMUM 2200

        WITH PROPELLER LOAD AND

            FULL OPEN THROTTLE

     ENGINE REVOLUTIONS MUST

     EQUAL OR EXCEED 1900 RPM

               FIRING ORDER

                 1 4 2 6 3 5

          TAPPET CLEARANCE

           INLET 020 THOUSANDTHS

    EXHAUST 025 THOUSANDTHS

In 2019 I visited Buffalo New York on a cruise through the Erie Canal and Great Lakes and looked for the old Sterling works.

I found that Sterling had been taken over by Phillips Petroleum in the late 1950s and the assets moved to Kansas.

The Sterling Company dates back to about 1903 and many speed records were held by boats with Sterling engines.

STERLING TEE HEAD 4 CYL PETROL MARINE ENGINE SIMILAR TO THAT AS DESCRIBED BY RUSSELL WARD ABOVE THAT HE COMMENTS WAS INSTALLED IN TASMAN IN THE 1960’S AFTER HER ORIGINAL KERMATH SEAWOLF

THE LAUNCH STERLING

I have researched extensively but have been unable to source an image of the 3-cylinder, 27 HP Sterling engine, as referred to below by Harold Kidd and in the launch STERLING as pictured above.  

Input from Harold Kidd: This STERLING was built by Ernie Lane in Picton in 1925 for L.J. Steele as a passenger vessel to carry 60 passengers and had a 1924-built, 3-cylinder, 27 HP (rated) Sterling marine engine with a bore of 4.5″ and a stroke of 5.5″. Dimensions are 34′ x 9′ x 3’9″.

HALL SCOTT DEFENDER V12 PETROL 630HP MARINE ENGINES

NGAROMA WITH HER 1 HALL SCOTT DEFENDER V12 PETROL ENGINE, & 1 GLENIFFER 8 CYL INLINE DIESEL ENGINE, WHEN OWNED BY JIM LAWLER

These Hall Scott Defender petrol engines were used in all Fairmiles during WWII wartime service. When sold into private ownership after the war, all were immediately replaced by diesel engines of various types, brands, and sizes, except for one privately owned Fairmile called the NGAROMA, owned at that time by Jim Lawler. This vessel retained one Hall Scott engine for around two years before replacing it with a second, opposite-handed, 8-cylinder inline Gleniffer Diesel to match the existing Gleniffer 8-cylinder engine he fitted when he purchased the NGAROMA, creating a matched handed pair.

There were also two RNZAF MIAMI CLASS American patrol craft bought by the RNZAF around 1948. One, W275, was sent to Lauthala Bay, Fiji, by the RNZAF, while the other, W276, remained here. W276 had two Hall Scott Defenders mounted in the stern and vee driven.

W276 WITH HER 2 HALL SCOTT DEFENDER V12 PETROL MARINE ENGINES  

JUNKERS GERMAN DIESEL AIRCRAFT ENGINE TO BE HOME CONVERTED FOR MARINE USE 

JUNKERS DOUBLE ACTING DUAL PISTON 6 CYL estimated at c.1000HP GERMAN AIRCRAFT ENGINE.

This boat (W276) as featured above, was sold in the 1960s to a Mr. Canavan, a retired senior Air Force officer. He employed two marine engineers to convert two German two-stroke Junkers aircraft diesel engines (probably the same or like those in the image above), which, as far as I can interpret, seem to have been around 1,000 hp each. He acquired and converted them for marine use, replacing the two Hall Scotts with these engines. 

This was a long and very expensive task for Mr. Canavan. During this process, she was moored adjacent to the up-harbour end of the Naval Base and was still painted air force grey. During the installation she acquired four very large exhaust pipe holes near the deck line at the stern.

These engines, like the engine in the hydrofoil MANU-WAI, required hot engine oil to be pumped through them for 20 minutes before cold starts. The two engineers, as mentioned above, eventually finished the project and went off to find Mr. Canavan so he could be present for their first start. While they were away looking for him, he turned up, went out to the boat, saw that they were ready to go, and pushed the buttons. They started but immediately seized up as they had not had the hot oil process completed first.

When the two engineers came back, they were naturally furious that after all their hard work, it had all come to this. So, as one would expect, they just picked up their tools and walked off the job. Eventually, Canavan got two more engineers to rebuild the engines, and while they were in the process of this, one day, when they were brazing with bottled gas, the stern end of the boat caught fire, and the aft 20 feet or thereabouts was destroyed. 

The insurance company sold her “as is, where is,” and someone bought her, chopped off the burnt-out back end, and fitted her, in her now shortened form, with two 6/71 GM Detroit diesels, added new pleasure craft-type coamings, and called her the LADY SOMETHING? or SOMETHING LADY?. This work was all done on the hardstand at Half Moon Bay Marina.

With her back end chopped off and her new coamings fitted, she looked very short and fat.

WAUKESHA HESSELMAN, LOW COMPRESSION, SPARK IGNITED DIESEL ENGINES.

WAUKESHA HESSLEMAN, SPARK IGNITED, 6 CYL DIESEL ENGINE.

WAUKESHA HESSELMAN SPARK IGNITED  LOW COMPRESSION DIAGRAMATIC VEW OF ENGINE DESIGN.

AWARUA WITH HER 6CYL WAUKESHA HESSELMAN DIESEL ENGINE.

LADY RAE, STANDING IN, FOR IDENTICAL SISTERSHIP, GALA LASS.

There were only two boats fitted with the 6-cylinder version of these engines, which had around 100+ hp. 

They were Ted Cooper’s built and owned AWARUA, which for the first couple of years had a Redwing petrol engine. He later replaced this with a Waukesha Hesselman 6-cylinder diesel, which she had for the remainder of his stewardship. A later owner, replaced it with a Ford diesel.

The other boat was the GALA LASS, which had an identical sister ship, the LADY RAE. 

GALA LASS had a Waukesha Hesselman diesel from new for the entire time of ownership by the original owner, Tony Hurt.  The LADY RAE had both one and two engines at different times, both with petrol or diesel, as was appropriate during her early years. I have not been able to locate an image of GALA LASS. I have substituted an image of LADY RAE in place of GALA LASS. 

STELLA – CLASSIC WOODEN BOAT SOS

20+ years ago

STELLA – CLASSIC WOODEN BOAT SOS

Last week Andrew Motte-Harrison commented on one of the stories that he had a old kauri launch ’currently deteriorating behind his farm hay shed’.

Andrew believes she was originally named STELLA and alsp possibly named TOILER at another time. Possibly built c.1910>15 by Lane Bros in Christchurch (thats a new one, was there such a place?). Andrew described STELLA as a line fishing boat.

Andrew also commented that when they had her up at the Nelson Marina, talking to an elderly boat builder up there years ago, he passed on what he understood to be some of her history.  He thought she had been working out of Bluff, Hokitika and perhaps Oban in years past (back then)

As the photos show the boat is in need of some serious TLC, starting with a few hours with a water blaster- inside and out. And maybe a session with a tungsten tipped chainsaw and then a new cabin. Her hull deserves saving.

The last photo was taken  over 20 years ago, before being hauled out.

So southern woodys anyone looking for a project, STELLA is located 20 minutes south of Murchison, approx. 2 hours out of Nelson.

INPUT ex DICK HALL – Built by Ernie lane in Picton for the Boese family with a low cabin and rails instead of bulwarks. Later purchased by well known fishing identity Jimmy Aldridge and converted by Jack Morgan with new wheelhouse, bulwarks and new air-cooled Lister. Jim crayfished mostly outside Tory Channel. Next owner Alex McKenzie from Blenheim who re-named her Toiler but after a few years sold her for a bigger vessel. Fished out of Picton all her life before going to Nelson for pleasure conversion. Her original name was Elaine then Toiler. Never Stella while in Picton