Mystery Work Boat

Posted on by
6

46043964_2205188076470055_5192037435575369728_o

Mystery Work Boat

Today’s photo comes to us from Lew Redwood’s fb, & show a very nice work boat towing a barge – the boat & location are unknown.
The barge has quite a crowd aboard, both females & males, so it must have been an outing / picnic.
Anyone able to ID the vessel for us, I wonder if she is still afloat?
Angus Rogers sent in the video below of a barrel cooper/hopper at work. Almost as such skill required as building a clinker dinghy.

Helene

Posted on by
4

Screen Shot 2018-11-13 at 3.41.19 pm

Screen Shot 2018-11-13 at 3.41.40 pm

HELENE

Today’s woody is Helene, a 33’8”, 1918 Miller & Tunnage ex workboat. Helene has a 9’10” beam & draws 3’3” & is built from solid kauri.

In her trademe listing (thanks Ian McDonald) there is no mention of an engine, I assume there is one………..?

In her past life as a commercial fishing boat she worked out of Akaroa. At some stage someone has done a smart conversation for pleasure use.

Can anyone fill in the gaps as to past & what engine she has?

Harold Kidd Input – The last time she was on Trade Me was in 2010 in Picton. She then had a 80hp Toyota diesel. No comment. 1918 is wrong as she was built in December 1913 for George Currie as a private launch (in fact as an “auxiliary yacht”). I’m not sure Miller & Tunnage were the builders but it’s possible. Miller Bros launched the big Sundstrum launch NORANA the same month (probably the same tide) so it wasn’t them. She was later in Lyttelton around the late 1920s.

Waitematawoodys T-shirts – Now On Sale

LR2016 ww shirts CM

In case you missed yesterdays story, scroll down to read how to ensure you will not be mistaken for a plastic boat person 😊

 

How Not To Be Mistaken For A Plastic Boat Owner

Posted on by
1

P1240008 copy

The Order Book Is Open For Waitematawoodys T-Shirts

Yesterday’s story on the re-launching of Pacific & My Girl, caused a bit of a stir – nothing to do with the boats, it was all about the photos of people wearing waitematawoodys t-shirts, my email inbox was overflowing with – where’s mine?, where can I buy them? etc.

So folks, it’s been 2 years since I offered up the chance to grab your own WW t-shirt, last year I was just too busy with the boring things in life e.g. work & also getting my boat ready of the Christmas/ NY cruising. This year I’m ahead of the game, for once 🙂 Also the numbers of people reading WW has increased by over 500%, so there are a lot naked woodys out there 🙂

  1. Some background on the T’s – I only source top quality AS Colour garments & we print in-house using old school manual screen printing processes for really tight detail & a durable finish. I’m passionate about WW & will only put the logo on something that is 100% quality.
  2. In terms of colour – previously I printed a very dark blue (navy) T, with white logo. So it’s that again. Over the last 2 years I have printed other colours for friends & give-ways, no promises but I might do another colour – e.g. black, let me know if you had a 2nd pick & I’ll see (no promises) how things go. The logistics of the ordering > printing > dispatch is a little frightening, my lips are sealed on numbers, but the house looked like a NZ Post mail center for a few weeks.
  3. Price – same as 2 years ago $34.95 (gst inclusive) + $5 p&p (one off freight charge, no matter the number you order). If that’s too much to pay for a quality T-shirt, well I guess you won’t be buying one, but I’m not prepared to compromise on standards.
  4. Sizes? Refer chart below. If there was interest I could do a smaller female size.
  5. Ordering – B4 Xmas I’m doing a limited print run, so if you want a shirt/s – I need your order by Friday 30th November, sooner would be even better. I’ll advise payment details when I confirm your order.
  6. What’s next – email me at waitematawoodys@gmail.com & advise:

# Your name 

# Postal address

# Phone

# Quantity & size/s 

Ps – Sent in a sealed courier bag, so if you are ordering for a Xmas present, no-one will know the contents.

Pps – Yes, I can send overseas – freight costs tba

Ppps – My models where flown in from Milan for the shot photo, at great expense – they won’t have to worry about ordering a new shirt 😉

Size Guide

Circle December 1st In The Diary – Big Woody Day / Weekend For CYA Woodys

Screen Shot 2018-11-12 at 5.24.52 PM

MY GIRL and PACIFIC Relaunched – 60+ Wooden Boat Photos

Posted on by
11

IMG_0142

P1030869

PACIFIC

P1030845

P1040033

P1040039

P1030999

MY GIRL

P1030846

P1030872

P1030900

IMG_0157

MY GIRL and PACIFIC Relaunched – 60+ Wooden Boat Photos

Big day on Saturday in the woody world, we had the launching of Pacific & My Girl. Pacific is a 1917 Joe Slattery designed & built launch, owned by Nathan Herbert, & has been out all winter at Milford Crusing Club’s yard getting a major over-haul – hats off to Nathan, Pacific is a stunner, the perfect choice & mix of colours & varnish. It has been a long winter but from the smiles on everyones face, dock-side, it was all worth it. This WW link will give you a peek at what she used to look like.   https://waitematawoodys.com/2014/02/07/5898/
Well done Nathan & Steven + a big cast of helpers thru-out the project.
Second splash was Jason Prew’s – 1925, Dick Lang built ‘My Girl’, also re-launched at MCC. Jason’s re-build of My Girl has been a very long 4 years, mostly out of sight in a cold (& sometimes wet) commercial storage yard. My Girl arrived at MCC approx. 6 weeks ago for the final touches. Some of NZ’s most respected woodys were shaking their heads when Jason bought My Girl, she was so close to being a BeeHive (box of matches) restoration, but Jason has a track record of bring woodys back from the dead & that he did with My Girl. This link will show you what he started with    https://waitematawoodys.com/2014/12/12/my-girl/
To see more of the project – check out his weblog.  https://www.my-girl.co.nz/mygirl/Welcome.html
Post launching, I managed to score an invite to go for a blast on My Girl, she is fast (my lips are sealed) but I expected that, what really impressed my was the ride – very smooth. The question of the day was – are classic woodys allowed trim tabs 🙂 I seem to recall James Mobberley had some ‘additions’ on Falcon…………..
Remember click on photos to enlarge 😉
Video footage of My Girl with the throttle open 🙂
Video & photos below ex Nathan Herbert 
Screen Shot 2018-11-12 at 4.42.21 AM
Screen Shot 2018-11-12 at 4.42.48 AM

Lady Joan

Posted on by
5

Screen Shot 2018-11-07 at 9.04.58 PM

Screen Shot 2018-11-07 at 9.04.46 PM

Screen Shot 2018-11-07 at 9.06.18 PM

A Sad End to Lady Joan
Lady Joan has appeared on WW before (link below + photo at end of story), at the time it was hoped that she would be restored, unfortunately that didn’t happen & now she is looking like be a scrapped for parts. Thanks to T Foh who spotted her tucked away on trademe in the motors/boots-marine/parts-accessories/other section. How was anyone ever going to find her there 🙂
There is a lot of chat on the previous WW story as to her possible provenance, read & you decide.
So Woodys, if you are looking for some low cost fitting, check out the trademe listing

https://waitematawoodys.com/2013/09/29/lady-joan/

Screen Shot 2018-11-07 at 8.53.52 PM
Lady Joan below in WWII livery. Photo ex Ken Ricketts
Screen Shot 2018-11-11 at 10.04.57 AM

 

Make Sure You Check In On Monday – 2 Lovely Ladies Dip Their Toes In The Brinny

A tease below – from Friday night at Milford Cruising Club slip, before I got distracted in Geoff Bagnall’s ‘lunch’ room 😉

IMG_0132

IMG_0122

 

Cruise To The Riverhead Hotel

Posted on by
3

P1220871_2

P1200186

Screen Shot 2018-11-08 at 2.10.56 PM
Screen Shot 2018-11-08 at 2.11.30 PM
Screen Shot 2018-11-08 at 2.11.43 PM
CRUISE TO THE RIVERHEAD HOTEL
If you have not visited the Riverhead Hotel by water, its time you did. The Classic Yacht Association (CYA) has an afternoon cruise to the pub next Sunday (18th). These events are a lot of fun – we head up the river / creek on mass & anchor / raft-up before going ashore for a drink & a catch-up. If you have concerns about the route, just follow the boat in front of you & anchor with the others. There will be plenty of ‘old-hands’ to show you the ropes.
High tide is 16:24pm & so we aim to be heading up the ‘creek’ 2hrs b4 HW, its a small tide at 2.8m so I would imagine we will be meeting up in the Herald Island / Lucus Creek area around 2.00pm, so leaving Westhaven area around 1pm. ETA at pub is 2.30pm & departure from the pub approx 5.30pm.
If you are not a CYA member (yet) come along & see what you have been missing out on.
The photo gallery above is a snap shot of past trips – enjoy.
Ps – Wear your WW shirt 🙂
P1240008

Ella B 4 Sale

Posted on by
2

Bill's Boats 015

Bill's Boats 010

Bill's Boats 012

Bill's Boats 004

ELLA B – 4 Sale
 
I have been contacted by Taupo woody, Shawn Vennell regarding the very smart woody – Ella B.
 
Ella B is a ‘Monte Carlo’ design, barrel-back, classic inboard mahogany run-about. She was built in NZ by Bill Brassington, & measures 24’6” with a 7’6” beam.
The zoom zoom is via a brand new 5.7 litre 350 BFI marine V8 Kodiak engine complete with a Borg Warner 71c model 1.1 velvet drive transmission. The build quality & attention to detail is amazing + all components in the build were brand new, with the trailer being custom made by Bill.
 
Unfortunately due to health issues, Ella B is reluctantly for sale. This is a turn-key boat, fill the tank & you are off. I suspect the seller is very realistic in terms of a price, interested parties can contact Bill’s son Glen, via email  ellaco@xtra.co.nz to discuss Ella B in more detail.
 
Ella B has appeared on WW b4 – more details here.
 

 

Folly III

Posted on by
10

FOLLY III

Today’s woody story features a 5’10” video on Folly III, a 33’ cruiser designed by W. Holmes & built by his sons, Reginald & William, c.1920 in Sydney, Australia. Her beam is 9′ & she draws 3′.
I understand Holmes senior was a kiwi builder that moved to Sydney to build bridges & later turned his talents to wooden boats, of all shapes & sizes.
I’m sure HDK will be able to enlighten us on the man.
The Folly III design follows the look of the popular American Lake Union Dream Boats.
The video is beautifully shot in Moreton Bay, Queensland & has a ‘colourful’ commentary from the Folly III owner, Stephen Lake 🙂 Enjoy
Thanks to woody John Sloane for the heads up on the video.

Pioneer – Work Boat Wednesday

Posted on by
9

44250834_2187117778277085_7191874049402732544_n

PIONEER – Work Boat Wednesday

Photo above ex Lew Redwood’s fb, is of Pioneer – the photo is dated 1941 & the venue is Akaroa, in the South Island.
Harold Kidd has commented that it was George Brasell’s boat.
Can any of the Work Boat group, tell us more about Pioneer.
Input from John Bullivant – Possibly designed by Joe Juke (Wellington ) as she looks very similar to Wild Duck (ex Wellington flying boat refueling vessel built by Juke Boat Builders (wellington 1937) and now restored and re modeled by the Tino Rawa Trust. Refer photo from Evans bay Wellington with Wild Duck and what looks like a sister ship along side. Quite a distinctive design. Wild Duck is 42ftx 12ft x 4ft 6″draught, Kauri carvel build.
Melbourne Cup Class Yacht Regatta – This Had To Be Ugly
The photo below was sent in by David Glen, who commented that the double-ender must have lost her rig & sustained serious damage in this incident. Anyone able to supply more details. Hopefully none of the listing kiwi contingent were aboard.
image001

Kermath 182

Posted on by
8

45338167_2199907580331438_1699707954200051712_o

KERMATH

I saw the above photo of Kermath on Lew Redwood’s fb & immediately thought of the 2018 Rudder Cup launch race – so todays post is a big nudge / reminder to get your entry in.
What do we know about Kermath, race #182 ? This photo was tagged ‘Winner of the Big Tree Handicap at the Ponsonby Regatta, March 3 1923.
Harold Kidd Input – There were several KERMATHs built for C E Mackie, of 25 London Street, St Mary’s Bay (the house in which I lived as a toddler) just behind Collings & Bell. Mackie was the Auckland agent for Kermath marine engines. The earlier boats were built by Collings & Bell but I think this is the one built by Leon Warne in December 1920 which, by the time of this race, had a Cadillac car engine installed which made her quick. I think she’s the KERMATH that went to the Bay of Islands soon after.