Todays 89’ woody motor sailer – Galerna, started life in Denmark where she was built in 1973, so falls into the ’spirit-of-tradition’ woody family.
In the top photo sent to me back in Jan 2022 by Richard Amery we see her berthed at the Viaduct in Auckland. How Galerna come to be in NZ I do not know but Ken Ricketts reports that she had a major refit by Titan Marine in Auckland in 2015.
Built to take a pounding, oak planks and frames, her hull measures nearly 14” and has a stainless steel ice skirt, all that plus a 5 cyl. B&W 550 hp diesel see her hitting the scales at 190 tonne. Galerna’s cruising range is 4000 miles at 8 knots.
From the photos sent in by KR we can see that she is equipped for expended cruising in grandeur. Can anyone tell us how she came to call NZ home?
Recently WW was contacted by Ron Hackett regarding a project that has had an incubation period of 64 years, its good read so I’ll let Ron tell the story. But to give you a heads up Ron is looking for a custodian to take on the project.
BOUNTY – 34’ sail boat in frame.
“In 1958, a Kauri log was purchased by a young apprentice joiner, named Maurice Fleming. His dream was finally coming true! He started a notebook, and carefully recorded his purchases. The log, from Waihou valley, near Kaikohe, cost 338 pounds. It was railed from there to Whau Valley, Whangarei, and that cost 24 pounds, 10 shillings. [The mill there was Parkers, and sawing the log cost 56 pounds, six shillings and sixpence, producing 5,268 super feet of first class heart kauri.
Maurice continued to work for his father as a joiner, and set up the vessel at his home, working on it as he could. The designer of the ‘Bounty’, Ken Low, was keen to help as well. Ken was a well known boat builder in Whangarei, and with his brother Ron, owned the Low Bros Boatyard in Ewing Rd. Ken had learned his trade with Bailey & Lowe in Auckland. Ron did mainly the engineering side of the business, and another brother, Norman (known as Nip), was a tug-master in New Plymouth and Auckland.
In Te Puna Inlet, Bay of Islands, there lives a vessel built by Bailey and Lowe, in 1911, ‘Waitemata’, a 55’ pilot launch for the Waitemata Harbour. The construction of the Bounty is the same as that used in Waitemata, so it’s clear that Ken designed the ‘Bounty’ to be built with the same methods he had learned at Bailey and Low – three skins on stringers, two diagonals and one fore and aft, plus a sawn bilge shelf. Ken was well known for designing well-balanced, sea-kindly boats. People who knew him had great respect for his skills in designing and building, and many considered him to be one of the best wooden boat builders this country has seen. Ken also designed the sail plan for the ‘Bounty’, as a fractional rig. He knew what would suit ‘Bounty’ best, and it has been said that the sail plan was ahead of it’s time. Ken was a perfectionist. Maurice was working under Ken’s guidance, who helped when he could. Maurice’s standards were also very high, anyone building their dream boat will understand! He wasn’t happy with the first pouring of the keel, and set about doing it a second time, and it came out perfect. The keel is about four and a half Ton. The backbone and floors are all fastened with bronze bolts, floors being 2” thick. There are two bulkheads, and a number of moulds, with the stringers let into the bulkheads, all being perfectly fair. Breast hook and quarter knees are grown pohutakawa, and the beams are fitted.
Unfortunately, Maurice had a major setback of a personal nature. He seemed to go into a depression which he never really recovered from. He hung up his tools, and all work on the ‘Bounty’ stopped. Eventually, when Maurice was ‘getting on’ and was in a retirement home, it was time to tidy up his affairs.
I bought the vessel and timber about 1997 for $27,000, fully intending to complete her, but I have had too many other projects on.
The ‘Bounty’ is a 34’ vessel, at present in frame. All of the Kauri planking milled in 1958 is available. The fore and aft planks are full length, all planking is machined, and the rabbits are all cut.There are a couple of teak planks for cabin coamings.
I feel this vessel is an important part of our history. Aspiring wooden boat builders, of whom there are currently very few, could be encouraged to study the construction and fine workmanship, and even to work on the vessel. Today it’s a rare thing to smell heart kauri in a steam box. Budding boat builders don’t have many opportunities to work on such a vessel.”
Todays a shout out to anyone that is this person or knows someone that is – looking for a work-life change. If you have a CV you’re probably not who we are looking for 🙂
In no particular order does this sound like you –
• Good practical hands on general skills
• Not afraid to roll your sleeves up and just get the job done
• Sense of humour
• Looking for full time / part time / flexible hours
• Age open – young > old, its all about attitude
We offer –
• Small passionate team
• Central Auckland location
• Working railway slip – one of few left in Auckland
Back in May 2020 we ran a story on the spirit of tradition classic launch – Caravel (link below), at the time the story would have broken the WW record for the number of people emailing me about a boat. Seems she ticked all the boxes for people considering doing laps of NZ in their retirement 🙂 Stunning photos ex Dean Wright at the link + the photo today is Deans also. https://waitematawoodys.com/2021/11/30/caravel/
We subsequently learnt that Caravel was built c.2004 in Picton, strip planked but using an unusual boat building timber – poplar. Fast forward 10 years and she was hauled out at Tauranga being re-skinned with double diagonal kauri and glassed, boat builder Alan Craig commented that she was now built like a brick-out-house.
Some details – designed by Bob Salthouse, 42’ in length, beam of 14’6” and draws 5’. Built by Miller and Tunnage, Picton.
Forward motion is from a John Deere 135hp diesel that gives her a comfortable cruising speed of 8 knots.
Todays story comes to us from retired boat builder Allan Hooper, just back from an extended trip to visit family the USA (Carlsbad just north of San Diego). I’ll let Allan tell the story :-
Prior to leaving I made contact with Morgan Spriggs the current owner of Lola, an NZ37. Lola was built at Jim Young’s NZ Yachts in 1969-70 while I was the foreman.
I was very keen to see the boat after all these years. Morgan has spent a lot of time restoring Lola and she looks as good as the date she left the factory apart from a few alterations and replacements. Morgan was excited to meet me and be able to talk about the build of the boat.
The hull construction is 4 skins of 1/4’” Kauri cold moulded with all of the back bone, floors, transom and bulkhead boundarys set in the mould. The hull was sheathed in Epoxy and glass. After the hull was taken off the mould the bulkheads and the interior were put in place and gunwales fitted.
The cabin, cockpit and decks were built on a separate mould complete with paint work, glazing and hardware. Then in an operation taking only a couple of hours, was lifted and placed on the hull, located over the bulkheads, glued and fastened down.
The techniques developed to build these yachts enabled a NZ37 to be built from start to finish in 4 weeks.
Morgan‘s father Robert owns a beautiful picnic boat, Easterly (photos below), an ex Maine lobster boat on which we toured the San Diego bay.
It was used by Denis Connor is a chase boat when he was sailing in the Americas cup. Robert Spriggs has owns the boat for 22 years and it is in as new condition, you could have eaten your lunch of the engine or engine room floor.
The teak cockpit sole is the best laid teak I have ever seen, the timber selected is absolutely perfect, as was the whole boat.
The waterfront at downtown San Diego has a beautiful collection of maritime exhibits including a sailing immigrant ship the “Star of India” which was a regular visitor to New Zealand in the 1800s, once a year it is taken out for a sail.
Further along the waterfront is the USS Midway launched in 1945, she was finally laid up in the 1990s. If you’ve never been on an aircraft carrier it’s well worth a visit. 3.5 acres of 3 inch thick steel makes up the flight deck. It is an interesting harbour to visit and extremely busy as it is alongside the international airport, a military airport, a naval base, several marinas and the city. When you go out on the bay you see it and hear it all.
Our friends across the ditch in Tasmania that pull together the Australian Wooden Boat Festival, commission some wonderful short films that provide an insight into the people and vessels that help make the AWBF so special.
We have featured several in the past and todays one is just such a cool, warm, feel good story. We meet Matt and Iefke – a young couple that were drawn together by a shared passion for wooden boats and are now building the boat of their dreams – Tarkine.
Both Matt and Iefke take us on the journey of how they meet, and express in words the reason why we do what we do and why we love wooden boats.
If today is anything weather wise like yesterday – find that spot x in the house and sit back and enjoy this short film.
Following on from yesterdays semi Sandspit story, I was there again during the week and did a quick loop of the SYC yard – nice collection of both traditional classics and spirit of tradition old hauled for some TLC.
If any of you are around any boat yards – get the phone out and take > send in some photo 🙂
The 34’ Shipbuilders launch Grenadier popped up recently on tme. Built in 1976 with triple diagonal kauri planking below the water and double diagonal above (+ f/glass)
Forward motion is via a Volvo 200hp that has her cruising at 7>8 knots.
Now post the ‘modified to include a top helm’ (sellers words) Grenadier would have been a real looker, in fact one of the better Shipbuilders designs, some can be a tad boxy.
Still it only wood and nothing a sharp chainsaw couldn’t right.
COMMUNICATIONS– Staying In The Loop
Waitematawoodys have a lot of contact details for classic woody owners, but I’m sure there are gaps – We regularly send details on upcoming gatherings, but due to factors like people changing their email address or service provider, over time gaps occur. In the interests of ensuring you are kept up to date and do not miss out on upcoming classic gatherings – drop WW an email with your name/email/mob #
HEADS-UP CLASSIC LAUNCH, WORK BOAT & CRUISING YACHT OWNERS (shared with the entire WW community as it should be of interest to all)
Next Tuesday (2nd August) the Classic Yacht Association of NZ will hold its 2022 AGM – 7pm @ RNZYS
On the meeting agenda the only item under general business is ‘Report on the status of the expanded classic vessel marina / dock’, while on face value this might be seen as a positive sign – it will not be – let me give my view of the probable gist of the report.
1. Given the agenda item is after the election of a new committee – the previous committee will have already pushed flush on this e.g. ‘’it will be up to the incoming committee to…….”
2. The report should be dubbed the toffee apple report i.e. it will have layers of sugar coating on / around it
3. The report will be a test of the genuiness (I made that word up as I need to be careful what I say) of the situation i.e. what’s not said rather than what is.
4. There will be mention around everything still in negotiations etc etc but the reality is that a small group of CYA members have been working on a new waterfront marina for the exclusive, long term use of classic yachts i.e. primarily A Class, ideally gaff rigged. This goes against what has been ’shared’ with the other stake holders (Panuku and Maritime Museum) – fyi one of positives of living in an open society is that almost anything tabled in / around the Auckland Council can be viewed – below is taken from a report published in a late 2021.
5. The new Heritage Basin discussion will be verbally rolled into an umbrella waterfront discussion – that we will be told will cover all classic vessels – I’m only interested in the Heritage Basin area – what should be New Zealand’s waterfront home of our vibrant , traditional classic wooden boating movement. The real loser in all this is the New Zealand public who will miss the opportunity to experience our classic boating heritage. Instead they will see a classic yacht ‘car’ park.
IF THE FUTURE OF NZ’s TRADITIONAL MARITIME MOVEMENT / FLEET INTERESTS YOU (and you’re a CYA member) PLEASE COME ALONG NEXT TUESDAY AND WITNESS WHAT WE WILL BE TOLD.
SIDE ISSUE – I believe there won’t even be a need to vote on the election of a new committee – there are only enough people standing to fill the available positions. A little sad that the role/s have so little appeal. Personally I think it Is actually a strategy to keep the fiefdom functioning.
RELAX – There is always a woody story
Today’s woody is Delmar, that when I first got involved in the classic boating movement was very much on the scene and participated in some of launch events.
While mooching around East Tamaki last week I spotted Delmar fresh from a visit to the beauty parlour – looking very smart.
Bay of Islands photographer Dean Wright took the above photos of the Clipper 23 – Black Tulip back in 1983. The location was School Road, Paihia.
A couple of unusual feature – shaft drive and a ’soft top’ hopefully will help us ID the boats current whereabouts and condition.
INPUT ex Murray Deeble – The famous Clipper Black tulip ex Lincoln Laidlaw (as seen on the cover of Seaspray) is retired at Milford . After her record breaking Auckland to Russel run when new with the Big V8 -she did a couple of Atlantic 100 races and disappeared, saw her at Sam Dorotich’s Superior Boats in the early 2000’s She has recently been sold -now powered with a Yanmar /BMW 4BY diesel -always been shaft drive.
