Kiwi – Sailing Sunday

KIWI  – Sailing Sunday
photos & details ex Peter Midegly

Following up on last Sundays post on the royal p-class yacht ‘Tui’, Peter Midegly sent in the above collection of photos of the 14’ sailing dinghy ‘Kiwi. She was built at the Devonport Naval Base by his late father, Eric Midgley, a shipwright, with the assistance of an apprentice, both employed at the dockyard. ‘Kiwi’ was built in Auckland for members of the royal family, this being the occasion of the wedding of the then Princess Elizabeth to Prince Philip in 1947.

Unlike the ‘Tui’, ‘Kiwi’ was well used, as is outlined in the letter below from G.A. Vince of the Sea Training Establishment at Botley, Southampton. This letter describes the workmanship of the boat as first class and her success in racing with other Naval 14 footers. In 1952 George Vince, Director of the Southampton Sailing Centre, also won first prize racing ‘Kiwi’ during Cowes Week that year.

Peter does not know whether the Royal couple sailed ‘Kiwi’ to any great extent, but from the 1950’s she was used by a number of sailing organisations & Sea Cadet Units .

Some years ago Peter made enquiries as to what had happened to ‘Kiwi’, and eventually located her at the National Maritime Museum Cornwall, Falmouth. At the time they told him she was in their offsite store in Falmouth.

Peter’s father started his boat building apprenticeship in 1923 with Joe Slattery. He later worked at Percy Vos’s during the building of the ferry Korea and from 1938 to 1950 at H.M. Dockyard, Devonport. His final employment was with the Auckland Harbour Board as a shipwright in Beaumont St. before retiring in the 1960’s.

Tui – Sailing Sunday

Tui – Sailing Sunday

I have had to photoshop the above photo as there were a few visible clues.
So the question today is – whats the boat & why she it famous?

After she has been ID’ed I will supply more details on the how I received the photo 😉

Update: The above P-Class is in fact Tui, built in Auckland by David Marks in 1952 and given to Her Majesty the Queen with the suggestion that Prince Charles might like to learn to sail in her. She is presently on loan to the ex Royal yacht Britannia from Portsmouth Naval Base. The photo was sent to me by David Balderston who visited Britannia recently while on holiday.

19-10-2015 Photo below of Tui’s display card was sent in by Greg Fenwick

12-09-2017 Input from Christopher Deane

Last month when we were in Edinburg, Scotland we went for a tour on the Royal Britannia .

I must say it is a very interesting tour. The first Yacht I have been on which carries a Rolls Royce as standard equipment.

Another interesting find was this P Class sailing yacht Tui that was presented to the Queen, during her tour in 1953 .

 

As a bonus today click the link to view some eye candy from the Panerai Regatta in Cannes. Photos courtesy of Classic Yacht / Guido Cantini / Officine Panerai

Regates Royales, 2015 in images

Patiki Yachts – Sailing Sunday + a trip to Waiheke

PATIKI YACHTS – SAILING SUNDAY
photo ex Michael O’Dwyer

The rather serene photo above shows a number of Patiki yachts tied up in Ahuriri Lagoon, it was taken just 4 days before the February 3rd 1931 Napier earthquake. The earthquake reduced the size of the lagoon considerably when the seabed in the area lifted (up to 2.7 metres just north of Napier) spelling the end of lagoon sailing to the far Poraiti hills. The photo is hanging on the wall at the Napier Sailing Club.

Updated – to appease Robin E I have added a wee bit more sailing to ‘sailing sunday’ 🙂

Kahurangi (below x2) at Napier – Michael O’Dwyer commented that the Patiki Kahurangi was last owned by a current NSC member Peter Parvin, about 30 years ago. He had replaced some broken ribs and had it moored in a creek awaiting further work. Unfortunately some scallywags deciding to go for an adventure untied it and let drift off into a storm grate which destroyed it.
Peter told Michael they had sailed her once in about 10 knots of breeze and recalls it being quite scary with her massive rig and no ballast.

Maroondah (below) off Westshore Beach

 

Some Chat
Yesterday several classic launch owners & friends went to Waiheke Island for the inaugural Oyster Festival held at the Rangihoua Estate Olive Grove, the day was a brilliant mix of live music, fine local wines & craft beers + the most succulent Te Matuku Bay oysters cooked every which way. And for the non oyster lovers there were plenty of other dishes to sample.
On route we had a a little scare that thankfully was a false alarm, while motoring along approx. 1k from the island we spotted something in the water & turned around. It was a body & the mood on board sobered up pretty fast, closer inspection revealed it was a dummy that Coast Guard had planted as part of an exercise. There was a note explaining this attached to the dummy. All very relived that the day was not going to be distributed by a ‘floater’.

A peek below at the venue & food.

Passed Nereides heading home

 

The Des Townson Story & The 2015 Classic Yacht & Launch Exhibition – Part 2 – Sailing Sunday

The Des Townson Story & The 2015 Classic Yacht & Launch  Exhibition – Part 2 – Sailing Sunday

Today’s post features the yachts, both keel & trailer, that are on display at the Tino Rawa Trust hosted exhibition & gives you a peek at the collection of memorabilia & models also on display.
The show is open today from 10.00am > 4.00pm at the Viaduct – details in yesterdays post (scroll down). So if you are looking for something to do post chapel ;-), come on down.

I’ll let the photos tell the story. Enjoy

Remember click on only photo to enlarge 😉

Updated – dropped down to the exhibition late this afternoon, primarilly because Colin Pawson told me I had over looked the best Townson yacht on show – Caper. I did have one photo of her, but most of the time I do what I’m told 🙂 so back I went.

So glad I went back & introduced myself to the owner & had a wee tour – simply stunning, & yes would get my best in show. Check out the bilge photo, I suspect the pump does not see a lot of use, a duster would be all that is required 😉

I also had a peek on-board the launch Aristos, she too is a work of art.

 

Tight Racing – Sailing Sunday

Tight Racing – Sailing Sunday

photo ex Mac Taylor Collection

Asking woodys to ID the race would be a big ask 🙂 so maybe we just ask that we match the yacht names to the sail numbers. From L>R its – E34 / L18 / A11 / E21 / E11 / A16 / A2 / H6 / B20 .

And if you wondered why we refer the boats as – shes , below might be the answer.

13m Marina Berth For Rent
If anyone is looking for a 13m marina berth at Gulf Harbour? one of the private apartment berths (extra security) is available on a long term / permanent basis. Email address below for details.   kenpat@ihug.co.nz

LA MORENA – Sailing Sunday

LA MORENA – Sailing Sunday

Sometimes you see a boat & just go wow – now everyone has their own taste but today’s yacht rang my bell. Got to love the dinghy & the solar panel 🙂
La Morena is a 95 square metre Skärgårdskryssare. She is a 1922 masterpiece by Gustaf Estlander, the Finnish architect.
The yacht was built in Germany for a Swedish engineer, Frithiof Dahl. He was a building contractor, at that time responsible for the building of Ragnar Östberg’s famous City hall in Stockholm. Under the name Roxane III, the engineer race her during the 1920’s and 30’s, against Kerma and other famous yachts, probably mostly around Sandhamn and Saltsjöbaden. Then the family Graffman own her for almost forty years. They call her La Morena, “the brunette” in Spanish. They sold her to Arne Fyrk and Bengt Helgesson in the late 1970’s, who moved her from Stockholm to Motala and lake Vättern, were she stayed for 20 years. La Morena was almost 60 years old when they bought her. No age for a beauty, but she had worked hard and was in deep need of recondition. Arne and Bengt’s effort saved her for the future. The year 1998 she was back in Stockholm with new owners, who sold her to the present owner in the summer of 2004.

During the winter of 2004-05 an extensive restoration were carried out. It ends with a new keel plank, a new rudder stem and knee, 50 meter new planking, a new stainless steel rudder, a new modern profile of the keel, and high finish of the whole bottom. Damages in the deck and deckhouse were also repaired, as were damages in the mast. The restoration has continued. With the aim to both have a shining and a fast yacht.

The text is Swedish but the photos of the restoration are stunning – link below
http://www.lamorena.se/restoration/

Also as a bonus – click the link to the on-line USA Classic Yacht magazine
http://www.myvirtualpaper.com/doc/ClassicYacht/clasicyacht-septoct2015/2015090801/

MONDAYS WW POST IS A MONTY – THE RESTORATION OF DICK FISHER’S EX. PILOT BOAT, ‘AKARANA’, 40+ photos.

Mistletoe – Sailing Sunday

Mistletoe – Sailing Sunday
photo ex Jason Prew

Jason snapped the photo above in August 2015 in Tauranga Harbour. Can not be a lot of ‘these’ down there so hopefully one of the woodys will be able to ID her.

Harold Kidd Update – 16/09/2015

Fred Mann built two 24 footers called MISTLETOE. The give away really is the narrow stern which betrays her early build. This is said to be MISTLETOE I which Fred built in late 1904, first race Auckland Anniversary Regatta January 1905. MISTLETOE II was built in 1914 and had very similar lines.
Frankly I am undecided which of the two this one is. Some authorities reckon she’s the 1904 boat, some the 1914. The APYMBA registration of MISTLETOE (sic) as I7 recorded her as being built in 1911, which merely shows how much confusion there has been since the second MISTLETOE was built.
Whichever one she is, she’s another survivor of Mann’s excellent design and craftsmanship.
I did most of my early keel yacht sailing on Lincoln Wood’s Harrison Butler-designed and Mann-built MEMORY and was regaled by Linc with Mann stories (as were most of Devonport’s young water rats he took as crew).

The  photo below was sent to me by Judith (Le Clerc) Wallath & is of a punt built in Whangarei for her brother Brian by their Dad, Godfrey Le Clerc.  The picture was taken at Onerahi with Limestone Island in the background. The punt was made out of a salvaged board that had borer and planks from a wooden case.  It was painted with tar from the gasworks but still leaked through the borer holes, and had a sail made from an ironing sheet, complete with iron-shaped scorch mark. Brian took it, against instructions, over to Limestone Island.  His Dad removed a plank from the bottom until there was a promise to behave.   Brian went on to become a champion P Class and Z Class sailor, and his sister (Judith) also sailed a P Class (on Hamilton Lake). Definitely a classic woody 🙂

Ngaio – Sailing Sunday

Ngaio – Sailing Sunday
photo ex Nathan Herbert

Todays photos were taken in early Jan 2015 by Nathan & are from Tutukaka. The hauled out ‘yacht’ has an interesting set up – 2 masts + game poles 🙂
I have to say it looks a great spot to haul out.

Anyone able to shed some light on the boat?

No longer a mystery – its Ngaio, designed by Jim Mason in 1941 – photos below from Dean Wright

Harold Kidd Input

In case Ian doesn’t post, she was designed and built by Jim Mason at Grey Street, Whangarei from a half model and launched in 1941. She was partly mobilised in 1942 by NAPS and crewed by Jim Mason, skipper, Tom McKinnon, deputy skipper, and Jack Carpenter, Bob Baker, Peter Roberts and Ian Crawshaw. Her NAPS number was Z40.
These NAPS boats did a great job during wartime when German commerce raiders and minelayers were busy around New Zealand at the start and were followed by Jap submarines checking us out. The Whangarei boats were in the most likely place for trouble.
Lovely boat.

Input from owner & son of builder, Ian Mason

A following up on Harolds post on Ngaio,all correct I might add. She was built over a two year period. She is carvel planked in kauri over kowhai ribs and pohutukawa stem, stern and floors. Her first engine was a 6 cylinder Delage out of a car owned by my father. When it was replaced in 1957 by an air cooled Enfield they got more for the scrap than Dad originally paid for the car. When she was built kauri was 3 pound 15 shillings per 100 super feet and the copper nails were the equivalent of 75c per pound. The original suit of sails cost 25 pound from Sails and Covers. In those days she carried 750 sq ft of sail. Since the Enfield she has been powered by a Ruston, Bedford and now a 6BB1 Isuzu. I installed this in 1995  and we have had 7000 trouble free hours since. I first went aboard Ngaio when I was 4 months old. I have 4 children and 9 (to date) grand children and they all love her as much as those  that have gone before. I think she will keep the same name and family ownership for a while yet.

 

Tomif – Sailing Sunday

TOMIF – Sailing Sunday
photos & details ex Don Kurylko & the WoodenBoat Forum

Now I have been a fan/follower of the USA WoodenBoat Magazine’s on-line forum for a long time, it was my go-to place for advice & guidance on most things to do with classic wooden boats. The secret was being able to ID who was handing out advice based on experience & who was sitting in a farm house 5,000 from the sea & had never owned a boat. There have been some amazing build projects & some real characters on-line. If you have not visited the forum I would encourage you to.

Everyone has their favourite stories (called threads) but one of best & longest running is the tale of Don Kurylko & the build of his 45′ cold moulded, topmast gaff cutter.  Below you will find the link to the WBF thread on Tomfi – lofting started back in 1981 & she came out of her shed earlier this year, yep thats 34 years 🙂  Don says that works out at close to 16,000 hours or 8 years of full time labour.

The story of Don test lofting in the snow is just one of many amusing tales – I’ll let Don tale it :-

“One day, a couple of winters before I started building, I found myself going a bit stir crazy and needed something to perk up my spirits. We were living in a small log cabin out in the boonies, without electricity, and there wasn’t much in the way of entertainment to be had. So, I grabbed a set of plans I had bought from designer Tom Colvin and headed out to the small pasture behind our place. I made up some long battens and “lofted” out the accommodations plan full size to see how it would fit. The snow was perfect. It had been really cold and the surface was so hard and crusty that you could walk on it without fear of breaking through. Once I got all the lines laid out, I filled them in with ashes from the wood stove. In a few hours I had a virtual boat that I could walk around in. It was fun and the drawing lasted for several weeks before it snowed again and covered it up. I guess there are some advantages to Canadian winters after all”.

The above photo collection is just a selection from the 100’s on Don’s Tomfi thread – if its raining today, I’ve probably ruined (or made) your day.

http://forum.woodenboat.com/showthread.php?123343-More-photos-of-Don-Kurylko-s-new-boat

SPECS:

LOA: 45’
LOD: 34’
DWL: 29’
BEAM: 10’
DRAFT 5’
DISP: 18,000 lbs
D/L: 333
BALLAST: lead – outside 5,600 lbs – inside 1000 to 2000 lbs, as required
B/D: 36% @ 6600 lbs; 42% @ 7600 lbs
SA working: 800 sq. ft. (SA/D: 18.5)
SA 3 lowers: 695 sq. ft. (SA/D: 16)

Janet – Sailing Sunday

JANE – Sailing Sunday
photos & details ex Mike O’Dwyer

Janet was designed by Chas. Bailey Jr. in 1902 & built by the Sutherland brothers in Domain Street, Devonport*. She is now owned by Andrew Wares, Bruce Isles and Michael O’Dwyer of Hawkes Bay. All friends since childhood with a common interest in sailing who decided to obtain a classic yacht – a day sailer, not too big, something with a bit of provenance that had to look nice. After a year of looking Janet came up and fitted the bill.

Janet was purchased in June 2013, shipped to Napier in April 2014 and relaunched in April 2015 after an eighteen month makeover. Almost all of the work being done by Mike O’Dwyer & with limited spare time saw the project sixteen months longer than expected. A brief overview of the project goes like this – she had six planks replaced, three each side in the garboard area, a certain amount of repair completed on the inner skin, and was fully re-caulked, puttied and painted. The keel and rudder were fared and the floors refastened. The rig was also spruced up with the mast being painted, the boom varnished/painted, fittings newly galvanized and the roller reefing system rebuilt. The owners report she sails beautifully and with improvements and tweaks continuing will only get better. In the first photo above she is seen enjoying her first sail in Napier waters.

The restoration goes like this – Janet was stored at the sailing club hardstand with scaffolding around her, the tarp covering the scaffold was originally rented because  they thought they would only be there two months to do a spruce up. Well the best laid plans…. After removing the paint with hand scrapers it was discovered that the wide seams were full of sika around the garboard area, a copper strip covered a dodgy seam, planks that looked like they had lost some fastenings. Further raking of seams revealed very old caulking and putty.

In one of the photos you can see below the dark water stained areas that there was a 10mm gap between the garboard plank and the inner skin. Only one thing for it, full re-caulk, putty and new planks. The bottom three on each side had to be replaced.

In another photo you can see a copper strip covering the seam just above the forward edge of the lead keel, the seam behind this was about 10mm wide and full of gunk. The wooden filler block on the leading edge of the keel also needed to be replaced.  When raking out a small section of a seam it started with newer cotton on the outer, as you went deeper the cotton got older until finally the last cotton to come out  was like a ribbon. The plank edges were parallel to each other back to the inner skin which made for a narrow deep seam. The seams were paid with a variety of products e.g there was black sika,white sika and putty. Up to five layers of caulking( the stranded type) were removed from some seams.

You can also see the scored waterlines in the hull planks. They counted about six of these either side. Janet had an inboard engine at some stage which could account for some of them.

The varnish product on Janet is Hempel diamond varnish & is a two pot varnish. There are five coats on everything that needed varnishing. The wind vane is home made & works a treat.

Below is an index to some of the photos & her owner talks you thru some of the work. Scroll over the photo to view the number. Also remember you can enlarge the photos by clicking on them 😉

Andrew, Bruce & Michael have done a wonderful job in restoring Janet & hopefully we will see her back on the Waitemata for some of the classic yacht regattas.

Mike will be posting some updates & photos on the CYA Forum – link below http://classicyacht.org.nz/cyaforum/topic/janet-back-in-action/

PHOTO INDEX:
Photo 1 – shows the hull primed and caulked. You can see the lowest three planks that are to be replaced and a rough area where a copper strip was used to cover a wide seam.
Photo 2 – the hull above the waterline puttied. Below the waterline redlead paint was added to the putty.
Photo 3 – planks removed portside. A couple of the planks literally fell off when the end screws were removed. It must have been the corrosive entities handing hands that kept them on.
The inner skin though black from years of bilge water,oil and god knows what else was still sound. Gotta  love that kauri. A few kauri shims also fell out,used as packers to take up a few gaps between the skins.
I remedied this with lightweight filler mixed in epoxy. Kauri locks also fitted at fore upper end of the lead keel ready for shaping.
Photo 4 – Inner skin repaired and first plank fitted. The floor fastenings were replaced also.
Photo 5 – Planks awaiting faring. Lots of red lead paste between the skins. Kauri blocks shaped and primed.
Photo 6 – Starboard planking underway. Eight new inner skin plank ends were scarfed in place.
Photo 7 – Bit of bling – I’m letting this oxidize however as I like the vert de gris look. Aging gracefully.
Photo 8 – Just about ready for the water. Still work to do on the rig.
Photo 9 – Not a bad looking rear.
Photo 10 – Happy boat back in the water after 15 months.
Photo 11 – Mast painted by brush. To many scarfs of different coloured timbers so went with the paint option.

*Harold Kidd Input

Angus and William Sutherland lived in Domain Street, Devonport. Angus was a shipwright with Chas. Bailey Jr and had Bailey design two yachts for himself and his sons. The first was JANET in 1902, a 24ft linear rater. The second was the 40 footer WAIONE, built to replace JANET in 1907. She was a 9 metre under the recently-adopted International Rating Rules.
Both yachts were built privately by the Sutherlands at their home in Domain Street, not at Bailey’s yard which, until 1912, was at 43 Customs Street West at the foot of Hobson Street. In November 1912 he moved his yard to the new reclamation at Beaumont Street, Freeman’s Bay.
Confusion arises sometimes because Chas. Bailey Jr DID design and build a JANET about this time, but it was a 30ft linear rater for J. McMurtrie of Sydney. Even then, some sources say she was a Sibbick design.
Your yacht was probably named after the Sydney yacht which was launched in 1901.

03-04-2016 Update – 2016 Art Deco Parade of Sail –  A Mark Foy start, Janet claimed line honours.

FullSizeRender (65)