Category Archives: Launches

Knoxie III > Miss Ida

Posted on by
14

Miss Ida 1 - Copy

Miss Ida 3

KNOXIE III > MISS IDA 
I was contacted yesterday by Greg Philpott, up until recently the owner of the Opua General Store in the Bay of Islands. Greg is on a missions – I’ll let him tell the story.
“By way of introduction, my partner Margaret and I have recently sold the Opua General Store business after owning it for just short of 6 years. During that time I became immersed in the history of the General Store and Opua itself  (along with it forerunner Te Wharau, which was the town that grew up in the 1870’s/80’s to service the Loading Ground – the site where Kawakawa coal was trans-loaded to ships at anchor. In 1884 the rail line was extended to Newport (now Opua), many buildings were shifted from Te Wharau to Opua and as such the township of Te Wharau has now totally disappeared.) The reason for relating that little snapshot is that all manner of launches, workboats, ferries and tourist craft have been a part of Opua (and by locational connection, the Bay of Islands) for its entire existence.
And so on to my current project – The Boats of the Bay. This is looking at the history of the commercial tourist Boats of the Bay of Islands. Their origins, their working life and their final situation
 
Here’s where I need help – Knoxie III was built for A E Fullers and Sons by Warne Bros at Matauwhi Bay in 1939. She was renamed Miss Ida in 1949. Whilst built originally to enhance the Fullers fleet for the Cream Trip it appears that much of her latter days were spent as a work boat and as the back-up launch for the Opua Okiato vehicular ferry, photos above. I am looking for pictures of her carrying the name Knoxie III And when did she depart the Fullers fleet and what was her history post Fullers?”
Anyone able to help out?

Sterling Girl – Bailey & Lowe 1913 Bridge-deck Launch

Posted on by
8

Screen Shot 2019-06-30 at 5.16.01 PM

Screen Shot 2019-06-30 at 5.19.39 PM

Screen Shot 2019-06-30 at 5.17.15 PM

Screen Shot 2019-06-30 at 5.19.50 PM

Sterling Girl – Bailey & Lowe 1913 
The above boat has a couple of features that ring my bell – a wood fire and a Ford Model T wheel / helm. On top of this she appears to be a very well loved woody.
Her length is 35’ with a beam of 9’6” and draws 4’. She was built in 1913 by Bailey & Lowe, from of course kauri.
Her engine is a 120hp 6cyl, Ford diesel that gives her a speed range of 8>11 knots.
As with most Southern boats she is very well fitted out.
And surprise surprise the broker (trying) to sell her, has again chosen to not list her name. Never mind one of our southern Woodys will supply that and hopefully more details.
Thanks to Ian McDonald for the listing heads-up.
Harold Kidd Input – STERLING GIRL was built for Robert Taylor of Birkenhead and was named after her Sterling engine, a high-quality American marine engine of the time for which Bailey & Lowe were the agents. When Taylor had the big schooner LADY STERLING built in 1920 by Bailey & Lowe he sold STERLING GIRL to Capt G H White and he sold her to Roy Henderson in 1924.

Hawkes Bay Mystery Motorsailer

Posted on by
7

Screen Shot 2019-06-01 at 3.26.21 PM

Screen Shot 2019-06-01 at 3.26.09 PM

Hawkes Bay Mystery Motorsailer

Todays photos come to us fro Lew Redwood’s fb, the name of the yacht is unknown, but we know it was owned by J.A. Louis Hay.
Again the location is also unknown, but the photo is tagged MTG Hawkes Bay which is – Museum Theatre Gallery, Napier – so that might be a big help ID’ing the location.
Interesting ‘funnel’ , I assume for a solid fuel stove. And speaking of wood stoves on boats (my dream) Mondays WW story ticks a lot of my boxes – wood stove + a Ford Model T wheel / helm.
Harold Kidd Input – I’ve scratched my head over this one before. J A Louis Hay was a well-known Napier Architect and amateur musician. Just a guess, he designed he boat himself and had it built locally at Westshore by R. Farquhar, very possibly the unnamed one he built in September 1915 before Hay went overseas to France, She was 26’6″x6′ with a 4hp Monarch. The “funnel” is probably a dry exhaust.
Bonus Read
I’m a big fan of the UK website Classic Sailor, it started out as a magazine, published by a past editor of Classic Boat magazine, but then after a few issues, went to a weblog format. They have some great articleds- check out this one on the restoration of the yawl – Wayward – see link below.

La Fayette

Posted on by
2

La Fayette 1

La Fayette 4

LA FAYETTE
 
Today’s launch is one of the Kaipara (West Coast, North Island) woodys – La Fayette, pictured above hauled out at Dargaville for some very overdue TLC.
Photos sent in by Jeff Norris.
What more do we know about her ? – Zach Matich hopefully will chip with some intel 🙂
 
EILEEN PATRICIA
Nearly fall of my bar stool when I saw a classic woody gracing the cover of the Boating NZ magazine – fantastic to see a woody pushing the normal plastic boats off the cover. If you want to read / see details on the restoration and 50+ launch day photos of Peter Mence’s – Eileen Patricia – click the WW links below
 
RESTORATION PHOTOS  
 
LAUNCH DAY PHOTOS
 
To view even more type Eileen Patricia in the WW search box – enjoy 🙂
IMG_1502

Classic Wooden Boat Project

Posted on by
2

Screen Shot 2019-06-27 at 6.02.56 AM

Screen Shot 2019-06-27 at 6.04.11 AM

Classic Wooden Boat Project

It’s been the week of project boats – for some reason they just keep popping up, thanks to Ian McDonald for the trade me heads up.

Today’s woody was built c.1930, carvel planked kauri and 26’ in length. She has a Nissan TD23 diesels engine, not sure of the condition. The listing says the hull is in good condition – but its a bit hard to tell, that grey undercoat is a bit like black stockings e.g. hides a magnitude of sins 😉

Currently hauled out in Kerikeri, Northland.

Keen to learn more about this woody – name?, designer / builder? – anyone able to help out?

 

Ruahine > Whizzbang SOS

Posted on by
3

Screen Shot 2019-06-25 at 8.54.23 PM

Screen Shot 2019-06-25 at 8.56.40 PM

RUAHINE SOS
Ruahine, previously named Whizzbang is in need of urgent help / saving. The Taupo Harbourmaster has put the 26’ woody up for disposal (landfill) if no one acquires her before 21st July.
Ruahine was previously berthed at Nukuhau Marina, Taupo – where she was abandoned. She can be viewed on the hard at Lake Taupo Marina.
She was appeared before on WW (2013) but sadly she has ’slipped’ in terms of maintenance / presentation – hopefully someone will save her and return her to her previous state. Make sure you read the comments section. https://waitematawoodys.com/?s=Whizzbang&submit=Search
Powered by a 4 cya. Isuzu diesel.
There must be a woody looking for a low entry ($) project. Photo below of her in 2013, looking very smart.
If no one steps up and she is heading to the landfill – I want the forward cowl 😉

Update ex Paul Drake

The photo below shows RUAHINE  in happier times (c.1970’s) at Waihaha, Lake Taupo.
On her foredeck is Ray Perry who saved her the last time she was abandoned.
Paul commented that he wondered how many boats have the distinction of being abandoned twice in their lives, nearly 50 years apart?
She is certainly worthy of saving, and can get along quite quickly with her Isuzu.
Ruahine c.1970 ex Paul Drake
UPDATE 29-07-2019 GREAT NEWS !!!!

“Well, now I’m the new owner of ruahine formerly whizzbang.
She was delivered to my driveway last Saturday 27/7/19.
She seems to be in good nick. I plan to strip the hull, repair and repaint.
There is rot in the cockpit and a bit on the gunnal. So after hull it’ll be replace and rebuild the top. Inside will be a new refit.
Engine appears to be in working order, will give that an overhaul in time as well.
My go is to have her back in the lake by summer…..

I am very interested in any of her history, so if anyone can provide me with some leads on getting further info I’d really appreciate it.
I’ll keep you all updated with my progress.
George”

Edith

Posted on by
2

IMG_0807

IMG_0806

EDITH

I was recently contacted by Vanessa Bailey in regard to her grandad parents displacement picnic boat Edith. Edith has been restored in a shed at Diary Flat by Arthur Nealy and Dominic Happe over the last 2+ years. Edith is a kauri clinker build and launched in 1925, 16’ in length.

During the restoration Edith her was paint stripped back to bare wood both internally and externally then coated with 5 coats of marine paint, a new Nanni diesel engine was fitted (est. speed 8 knots). In addition new fuel tank, new electrical, new propeller shaft and new propeller was fitted.

I have asked for some photos of the project, so hopefully we can see the work involved in bringing this beauty back to as launched (or better) condition. Congratulations to all involved.

Check out the very impressive trailer (below)

IMG_0428

 

Miss Sandra (Kokiri)

Posted on by
6

Screen Shot 2019-06-23 at 10.08.23 AM

Screen Shot 2019-06-23 at 10.08.12 AM

MISS SANDRA (Kokiri)

Today’s woody comes to us via Greg Philipott’s fb page. Greg commented that Miss Sandra was built c.1962, probably in Auckland (tbc).
She was named after Lola and Snooks Fuller’s daughter. Then renamed Kokiri after NZ Shipping / P&O purchased Fullers from George Wooller.
Chris Brittain commented on the fb post that Fullers repowered her with a GM 671.
Nathan Herbert also commented that her hull looked like an early Jim Young design.
Greg is keen to learn more about Miss Sandra. So woodys any details, stories, photos?
Input from Graham Clifford
“I was a full time skipper of Miss Sandra from 1967 – 71 when she was engaged in big game fishing, light tackle winter fishing and occasional runabout duties.  I continued my association with her on a piecemeal basis in the years after she retired from fishing in 1971 and took her new name “Kokiri.”  Under this name she was used variously as a scenic cruise boat,  a pilot boat to and from ships visiting Port Opua and a general roustabout.
Miss Sandra was a 36 foot Vindex hull built of kauri in Fullers new slipway shed at Russell in 1966.  I was present during her construction.  In late ‘66 I took over as her gamefishing skipper.  Together we captured a 547 pound blue marlin.  The following season, in March 1968,  we landed and weighed the biggest marlin caught in New Zealand waters, a blue marlin of over one thousand pounds (1017 lbs)
Miss Sandra was originally powered by a 6-cylinder Fordson diesel but was soon repowered with a Caterpillar turbo charged engine which gave her a top speed of 20 knots light. I used this engine for more than two years.  In 1967 I used Miss Sandra and her speed to assist Police in the transfer of a stabbing victim from a ship which arrived in Doubtless Bay. The victim (Wylie Hanby Roberts) needed hospital treatment and would have certainly died had the ship not diverted to Doubtless Bay.  Miss Sandra had the speed to get from the Bay of Islands to Doubtless Bay in time to meet the ship offshore.   The Caterpillar engine was replaced in 1969 with 6 cylinder Fordson and again with another Fordson.  Her final re-powering was with a noisy GM which coincided with her name change to “Kokiri.”  Her gamefishing days were over.  She became a part time scenic cruise boat fitted with airline-style seats and a small public address system.  This role did not suit Kokiri well and I personally shunned her other than to favour her for pilot duties.  The two principle maritime pilots liked her for her speed.”

PIKO – A peek down below

Posted on by
2

Screen Shot 2019-06-23 at 7.33.05 PM

Screen Shot 2019-06-23 at 7.40.25 PM

Screen Shot 2019-06-23 at 7.38.57 PM

PIKO – A peek down below
Piko was built in 1924 by Collings & Bell and is 28’ in length, with a 6’ beam and she draws 2’.
Power is from a 2002, 18hp Volvo diesel.
Her current home is on Lake Rotoiti (Nth Is.) She has made numerous appearances on WW before as part of the annual Lake Rotoiti Classic and Wooden Boat Parade.
She has just popped up on trademe with a very realistic price of $15k, needs some TLC to the interior but nothing most of us couldn’t do.
Interested in hearing more about her past life i.e. has she always been on the lake and if not where has she been over the years.
Harold Kidd Input – PIKO was built in Parnell in September 1927, designed by and built under the supervision of H.N. Burgess, formerly boatbuilding in Judges Bay. Her first owner was J Bates. She had a Briscoe heavy duty engine. Bates kept her at Judges Bay. Not Collings & Bell.

Murray Deeble Input – She was on a mooring off Akarana prior to being transported to Tauranga/Rotoiti in the early 90’s

Diana White

Posted on by
2

20161118_134743

DIANA WHITE

Today’s woody story is a tad out there – we have a 38’ ex lifeboat looking for a new home. Well to be honest we are really looking for a woody with a big shed and lots of vision. Owner John Fairburn wrote to me saying he had too many projects on the go and needed to find a new home. I’ll let John tell you in his words:

“Diana White has crossed the Manukau Bar in extreme conditions without a worry and travelled at sea when no-one else was, is now for sale. It had always been a slipway boat until it’s 1st private owner previous to me took it over and the huge anodes that earthed the SSB radio brought on a softening of timber through electrolysis around bronze, stainless and galv steel plus alloy cabin.

A lifeboat has many compartments held together with many bolts and special bronze and galvanised steel framework that had begun to rust in a few spots, so it took a bit to get back to bare hull to work on any soft stuff, and then I was going to use epoxied timber to rebuild. It’s a double ender 37’6″ x 12’0″ x 3’6″ with 2 x 23″ propellers in tunnels and weighed 13 tons. 

I was going to re-power and fit twin rudders so sold the 2 D series Fords that returned a litre per nautical mile at sea. At the moment it’s a bare hull so easier to survey (tap hull for soft timber) and is much reduced in weight and therefore easier to transport. I was in process selling props / shafts / stern-tubes / stuffing boxes and couplings, rudder, stainless bow rails and alloy swing down mast with radar reflector and 2 x stainless fuel tanks and the guy across road wants to turn hull into a house/cabin but a local Katikati boat owner reminded me of Waitemata Woodys, so if someone wants to pay me $3000 they can have the lot complete with RNLI drawings (1 inch to the foot) so they can plan their finished project.

I’ve still got a big oak tiller that has bronze end fitting that clicks into bronze shoe for manual steering and a special cutting tool to clear propellers through tunnel access ports.”

20160929_163234